当前位置: 首页>>代码示例>>C++>>正文

C++ S3C64XX_GPN函数代码示例

本文整理汇总了C++中S3C64XX_GPN函数的典型用法代码示例。如果您正苦于以下问题：C++ S3C64XX_GPN函数的具体用法？C++ S3C64XX_GPN怎么用？C++ S3C64XX_GPN使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了S3C64XX_GPN函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: setup_sdhci0_irq_cd

static void setup_sdhci0_irq_cd (void)
{
	/* init GPIO as a ext irq */
	s3c_gpio_cfgpin(S3C64XX_GPN(12), S3C_GPIO_SFN(2));
	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_NONE);

	set_irq_type(S3C_EINT(12), IRQ_TYPE_EDGE_BOTH);
}
开发者ID:ZhizhouTian，项目名称:s3c-linux，代码行数:8，代码来源:setup-sdhci.c

示例2: buddy_get_key

/*
 * key value
 */
static void buddy_get_key(void)
{
	/*
	 * Get value for gpio.
	 */
	printk(KERN_INFO "Key03[%2d]\n",gpio_get_value(S3C64XX_GPN(2)));
	/*
	 * Get irq number for gpio.
	 */
	printk(KERN_INFO "Key03 irq is[%d]\n",gpio_to_irq(S3C64XX_GPN(2)));
}
开发者ID:buddyzhangrenze，项目名称:i2c，代码行数:14，代码来源:buddy.c

示例3: gpio_to_irq

int gpio_to_irq(unsigned gpio)
{
	if ( gpio >= S3C64XX_GPN(0) && gpio <= S3C64XX_GPN(15) )
		return IRQ_EINT(gpio - S3C64XX_GPIO_N_START);
	else if ( gpio >= S3C64XX_GPL(8) && gpio <= S3C64XX_GPL(14) )
		return IRQ_EINT(gpio - S3C64XX_GPL(8) + 16);
	else if ( gpio >= S3C64XX_GPM(0) && gpio <= S3C64XX_GPM(4) )
		return IRQ_EINT(gpio - S3C64XX_GPM(0) + 23);
	
        return -EINVAL;
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:11，代码来源:gpiolib.c

示例4: smdk6410_lcd_power_set

static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
				   unsigned int power)
{
	if (power) {
		gpio_direction_output(S3C64XX_GPF(13), 1);

		/* fire nRESET on power up */
		gpio_direction_output(S3C64XX_GPN(5), 0);
		msleep(10);
		gpio_direction_output(S3C64XX_GPN(5), 1);
		msleep(1);
	} else {
		gpio_direction_output(S3C64XX_GPF(13), 0);
	}
}
开发者ID:0-T-0，项目名称:ps4-linux，代码行数:15，代码来源:mach-smdk6410.c

示例5: init_gpio

static void init_gpio(void)
{
	int i;
	for(i =0;i < KEYNUM;i++)
	{
		s3c_gpio_cfgpin(S3C64XX_GPN(i),2);
		irq_set_irq_type(IRQ_EINT(i),dev_info[i].flags);
	}
}
开发者ID:houstar，项目名称:driver，代码行数:9，代码来源:misc_key.c

示例6: irq_to_gpio

int irq_to_gpio(unsigned irq)
{
	if (irq >= IRQ_EINT(0) && irq <= IRQ_EINT(15))
		return S3C64XX_GPN(irq - IRQ_EINT(0));
	else if (irq >= IRQ_EINT(16) && irq <= IRQ_EINT(22))
		return S3C64XX_GPL(irq - IRQ_EINT(16) + 8);
	else if (irq >= IRQ_EINT(23) && irq <= IRQ_EINT(27))
		return S3C64XX_GPM(irq - IRQ_EINT(23));
	
        return -EINVAL;
}
开发者ID:Asrake，项目名称:m8_android_kernel，代码行数:11，代码来源:gpiolib.c

示例7: wm1192_pre_init

static int wm1192_pre_init(struct wm831x *wm831x)
{
	int ret;

	/* Configure the IRQ line */
	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);

	ret = platform_device_register(&wm1192_pmic_led_dev);
	if (ret != 0)
		dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);

	return 0;
}
开发者ID:0-T-0，项目名称:ps4-linux，代码行数:13，代码来源:mach-smdk6410.c

示例8: ok6410_machine_init

static void __init ok6410_machine_init(void)
{
	u32 cs1;

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&ok6410_lcd_pdata);
	s3c_hsotg_set_platdata(&ok6410_hsotg_pdata);

	samsung_keypad_set_platdata(&ok6410_keypad_data);

	s3c_nand_set_platdata(&ok6410_nand_info);
	s3c24xx_ts_set_platdata(NULL);

	/* configure nCS1 width to 16 bits */

	cs1 = __raw_readl(S3C64XX_SROM_BW) &
		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
						   S3C64XX_SROM_BW__NCS1__SHIFT;
	__raw_writel(cs1, S3C64XX_SROM_BW);

	/* set timing for nCS1 suitable for ethernet chip */

	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);

	gpio_request(S3C64XX_GPN(5), "LCD power");
	gpio_request(S3C64XX_GPF(13), "LCD power");

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	s3c_ide_set_platdata(&ok6410_ide_pdata);

	samsung_bl_set(&ok6410_bl_gpio_info, &ok6410_bl_data);

	platform_add_devices(ok6410_devices, ARRAY_SIZE(ok6410_devices));

	/* enable USB phy clock */
	s5p_usb_phy_init(&s3c_device_usb_hsotg, USB_PHY_TYPE_DEVICE);
}
开发者ID:mopplayer，项目名称:linux-ok6410，代码行数:49，代码来源:mach-ok6410.c

示例9: smdk6410_machine_init

static void __init smdk6410_machine_init(void)
{
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&smdk6410_lcd_pdata);

	gpio_request(S3C64XX_GPN(5), "LCD power");
	gpio_request(S3C64XX_GPF(13), "LCD power");
	gpio_request(S3C64XX_GPF(15), "LCD power");

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
开发者ID:miselmipoivre，项目名称:I5700-kernel-2.6.32.9，代码行数:15，代码来源:mach-smdk6410.c

示例10: smdk6410_wm8350_init

static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
{
	int i;

	/* Configure the IRQ line */
	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);

	/* Instantiate the regulators */
	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
		wm8350_register_regulator(wm8350,
					  wm1190_regulators[i].regulator,
					  wm1190_regulators[i].initdata);

	return 0;
}
开发者ID:0-T-0，项目名称:ps4-linux，代码行数:15，代码来源:mach-smdk6410.c

示例11: smdk6410_wm8350_init

static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
{
	int i;

	
	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);

	
	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
		wm8350_register_regulator(wm8350,
					  wm1190_regulators[i].regulator,
					  wm1190_regulators[i].initdata);

	return 0;
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:15，代码来源:mach-smdk6410.c

示例12: smdk6410_machine_init

static void __init smdk6410_machine_init(void)
{
	u32 cs1;

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);

	samsung_keypad_set_platdata(&smdk6410_keypad_data);

	s3c24xx_ts_set_platdata(NULL);

	

	cs1 = __raw_readl(S3C64XX_SROM_BW) &
		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
						   S3C64XX_SROM_BW__NCS1__SHIFT;
	__raw_writel(cs1, S3C64XX_SROM_BW);

	

	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);

	gpio_request(S3C64XX_GPN(5), "LCD power");
	gpio_request(S3C64XX_GPF(13), "LCD power");

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	s3c_ide_set_platdata(&smdk6410_ide_pdata);

	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);

	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:45，代码来源:mach-smdk6410.c

示例13: smdk6410_machine_init

static void __init smdk6410_machine_init(void)
{
	u32 cs1;

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&smdk6410_lcd_pdata);

	s3c24xx_ts_set_platdata(&s3c_ts_platform);

	/* configure nCS1 width to 16 bits */

	cs1 = __raw_readl(S3C64XX_SROM_BW) &
		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
						   S3C64XX_SROM_BW__NCS1__SHIFT;
	__raw_writel(cs1, S3C64XX_SROM_BW);

	/* set timing for nCS1 suitable for ethernet chip */

	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);

	gpio_request(S3C64XX_GPN(5), "LCD power");
	gpio_request(S3C64XX_GPF(13), "LCD power");
	gpio_request(S3C64XX_GPF(15), "LCD power");

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:39，代码来源:mach-smdk6410.c

示例14: crag6410_machine_init

static void __init crag6410_machine_init(void)
{
	/* Open drain IRQs need pullups */
	s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
	s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);

	gpio_request(S3C64XX_GPB(0), "LCD power");
	gpio_direction_output(S3C64XX_GPB(0), 0);

	gpio_request(S3C64XX_GPF(14), "LCD PWM");
	gpio_direction_output(S3C64XX_GPF(14), 0);  /* turn off */

	gpio_request(S3C64XX_GPB(1), "SD power");
	gpio_direction_output(S3C64XX_GPB(1), 0);

	gpio_request(S3C64XX_GPF(10), "nRESETSEL");
	gpio_direction_output(S3C64XX_GPF(10), 1);

	s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);

	s3c_i2c0_set_platdata(&i2c0_pdata);
	s3c_i2c1_set_platdata(NULL);
	s3c_fb_set_platdata(&crag6410_lcd_pdata);

	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	samsung_keypad_set_platdata(&crag6410_keypad_data);

	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));

	regulator_has_full_constraints();

	s3c_pm_init();
}
开发者ID:303750856，项目名称:linux-3.1，代码行数:37，代码来源:mach-crag6410.c

示例15: mini6410_machine_init

static void __init mini6410_machine_init(void)
{
	u32 cs1;

	s3c_i2c0_set_platdata(NULL);
#ifdef CONFIG_S3C_DEV_I2C1
	s3c_i2c1_set_platdata(NULL);
#endif

	s3c_fb_set_platdata(&mini6410_lcd_pdata);

#ifdef CONFIG_SAMSUNG_DEV_TS
	s3c24xx_ts_set_platdata(&s3c_ts_platform);
#endif
#ifdef CONFIG_TOUCHSCREEN_MINI6410
	s3c_ts_set_platdata(&s3c_ts_platform);
#endif

	s3c_sdhci0_set_platdata(&mini6410_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);

#ifdef CONFIG_MTD_NAND_S3C
	s3c_device_nand.name = "s3c6410-nand";
#endif
	s3c_nand_set_platdata(&mini6410_nand_info);

	s3c64xx_ac97_setup_gpio(0);

	/* configure nCS1 width to 16 bits */

	cs1 = __raw_readl(S3C64XX_SROM_BW) &
		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
						   S3C64XX_SROM_BW__NCS1__SHIFT;
	__raw_writel(cs1, S3C64XX_SROM_BW);

	/* set timing for nCS1 suitable for ethernet chip */

	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);

	gpio_request(S3C64XX_GPN(5), "LCD power");
	gpio_request(S3C64XX_GPF(13), "LCD power");
	gpio_request(S3C64XX_GPF(15), "LCD power");

	if (ARRAY_SIZE(i2c_devs0)) {
		i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	}
	if (ARRAY_SIZE(i2c_devs1)) {
		i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
	}

#ifdef CONFIG_S3C64XX_DEV_FIMC0
	s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
	s3c_fimc1_set_platdata(NULL);
#endif

	platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
	platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); //GPIO resource MAP
	if ((platform_device_register(&mini6410_leds))!=0)
		printk( "Failed to register  LEDs.\n");
	else
		printk( "LEDs initialized.\n");

#ifdef CONFIG_VIDEO_SAMSUNG
	create_proc_read_entry("videomem", 0, NULL, s3c_media_read_proc, NULL);
#endif
}
开发者ID:IoveSunny，项目名称:DreamBox，代码行数:77，代码来源:mach-mini6410.c


注：本文中的S3C64XX_GPN函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。