当前位置: 首页>>代码示例>>C++>>正文

C++ RTMP_MLME_HANDLER函数代码示例

本文整理汇总了C++中RTMP_MLME_HANDLER函数的典型用法代码示例。如果您正苦于以下问题：C++ RTMP_MLME_HANDLER函数的具体用法？C++ RTMP_MLME_HANDLER怎么用？C++ RTMP_MLME_HANDLER使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了RTMP_MLME_HANDLER函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: ApCli_VirtualIF_Close

/*
========================================================================
Routine Description:
    Close a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: close successfully
    otherwise: close fail

Note:
========================================================================
*/
INT ApCli_VirtualIF_Close(
	IN	PNET_DEV	dev_p)
{
	UCHAR ifIndex;
	PRTMP_ADAPTER pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	for (ifIndex = 0; ifIndex < MAX_APCLI_NUM; ifIndex++)
	{
		if (pAd->ApCfg.ApCliTab[ifIndex].dev == dev_p)
		{
			RTMP_OS_NETDEV_STOP_QUEUE(dev_p);
			
			// send disconnect-req to sta State Machine.
			if (pAd->ApCfg.ApCliTab[ifIndex].Enable)
			{
				MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_DISCONNECT_REQ, 0, NULL, ifIndex);
				RTMP_MLME_HANDLER(pAd);
				DBGPRINT(RT_DEBUG_TRACE, ("(%s) ApCli interface[%d] startdown.\n", __FUNCTION__, ifIndex));
			}
			break;
		}
	}

	VIRTUAL_IF_DOWN(pAd);

	RT_MOD_DEC_USE_COUNT();

	return 0;
} /* End of ApCli_VirtualIF_Close */
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:49，代码来源:ap_apcli_inf.c

示例2: ApCliPeerDeauthAction

/*
    ==========================================================================
    Description:
    ==========================================================================
*/
static VOID ApCliPeerDeauthAction(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
	UCHAR       Addr1[MAC_ADDR_LEN];
	UCHAR       Addr2[MAC_ADDR_LEN];
	UCHAR       Addr3[MAC_ADDR_LEN];
	USHORT      Reason;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = NULL;
#ifdef MAC_REPEATER_SUPPORT
	UCHAR CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */

	if ((ifIndex >= MAX_APCLI_NUM)
#ifdef MAC_REPEATER_SUPPORT
		&& (ifIndex < 64)
#endif /* MAC_REPEATER_SUPPORT */
		)
		return;

#ifdef MAC_REPEATER_SUPPORT
	if (ifIndex >= 64)
	{
		CliIdx = ((ifIndex - 64) % 16);
		ifIndex = ((ifIndex - 64) / 16);
		pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].RepeaterCli[CliIdx].AuthCurrState;
	}
	else
#endif /* MAC_REPEATER_SUPPORT */
	pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].AuthCurrState;


	if (PeerDeauthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr1, Addr2, Addr3, &Reason))
	{
		DBGPRINT(RT_DEBUG_TRACE, ("APCLI AUTH_RSP - receive DE-AUTH from our AP\n"));
		*pCurrState = APCLI_AUTH_REQ_IDLE;


#ifdef MAC_REPEATER_SUPPORT
		ifIndex = (USHORT)(Elem->Priv);
#endif /* MAC_REPEATER_SUPPORT */

		MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PEER_DISCONNECT_REQ, 0, NULL, ifIndex);
#ifdef MAC_REPEATER_SUPPORT
		if ((pAd->ApCfg.bMACRepeaterEn == TRUE) && (ifIndex >= 64))
		{
			RTMP_MLME_HANDLER(pAd);
			ifIndex = ((ifIndex - 64) / 16);
			RTMPRemoveRepeaterEntry(pAd, ifIndex, CliIdx);
		}
#endif /* MAC_REPEATER_SUPPORT */
	}
	else
	{
		DBGPRINT(RT_DEBUG_TRACE, ("APCLI AUTH_RSP - ApCliPeerDeauthAction() sanity check fail\n"));
	}

	return;
}
开发者ID:houzhenggang，项目名称:mt7688_mips_ecos，代码行数:65，代码来源:apcli_auth.c

示例3: BAOriSessionSetupTimeout

/*
	==========================================================================
	Description:
		Retry sending ADDBA Reqest.
		
	IRQL = DISPATCH_LEVEL
	
	Parametrs:
	p8023Header: if this is already 802.3 format, p8023Header is NULL
	
	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
				FALSE , then continue indicaterx at this moment.
	==========================================================================
 */
VOID BAOriSessionSetupTimeout(
    IN PVOID SystemSpecific1, 
    IN PVOID FunctionContext, 
    IN PVOID SystemSpecific2, 
    IN PVOID SystemSpecific3) 
{
	BA_ORI_ENTRY    *pBAEntry = (BA_ORI_ENTRY *)FunctionContext;
	MAC_TABLE_ENTRY *pEntry;
	PRTMP_ADAPTER   pAd;
	
	if (pBAEntry == NULL)
		return;

	pAd = pBAEntry->pAdapter;

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		/* Do nothing if monitor mode is on*/
		if (MONITOR_ON(pAd))
			return;
	}
#endif /* CONFIG_STA_SUPPORT */
    

	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];

	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY))
	{
		MLME_ADDBA_REQ_STRUCT    AddbaReq;  

#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
			if (INFRA_ON(pAd) && 
				RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) &&
				(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)))
			{
				/* In scan progress and have no chance to send out, just re-schedule to another time period */
				RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
				return;
			}
		}
#endif /* CONFIG_STA_SUPPORT */

		NdisZeroMemory(&AddbaReq, sizeof(AddbaReq));
		COPY_MAC_ADDR(AddbaReq.pAddr, pEntry->Addr);
		AddbaReq.Wcid = (UCHAR)(pEntry->Aid);
		AddbaReq.TID = pBAEntry->TID;
		AddbaReq.BaBufSize = pAd->CommonCfg.BACapability.field.RxBAWinLimit;
		AddbaReq.TimeOutValue = 0;
		AddbaReq.Token = pBAEntry->Token;
		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE, sizeof(MLME_ADDBA_REQ_STRUCT), (PVOID)&AddbaReq, 0);
		RTMP_MLME_HANDLER(pAd);
		DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) : Send ADD BA again\n", pBAEntry->Token));

		pBAEntry->Token++;
		RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
	}
开发者ID:1950packard，项目名称:rt3573sta，代码行数:73，代码来源:ba_action.c

示例4: ApCliPeerDisassocAction

/*
    ==========================================================================
    Description:
        left part of IEEE 802.11/1999 p.374 
    Parameters:
        Elem - MLME message containing the received frame
    ==========================================================================
 */
static VOID ApCliPeerDisassocAction(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem) 
{
	UCHAR         Addr2[MAC_ADDR_LEN];
	USHORT        Reason;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	ULONG *pCurrState = NULL;
#ifdef MAC_REPEATER_SUPPORT
	UCHAR CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */

	if ((ifIndex >= MAX_APCLI_NUM)
#ifdef MAC_REPEATER_SUPPORT
		&& (ifIndex < 64)
#endif /* MAC_REPEATER_SUPPORT */
		)
		return;

#ifdef MAC_REPEATER_SUPPORT
	if (ifIndex >= 64)
	{
		CliIdx = ((ifIndex - 64) % 16);
		ifIndex = ((ifIndex - 64) / 16);
		pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].RepeaterCli[CliIdx].AssocCurrState;
	}
	else
#endif /* MAC_REPEATER_SUPPORT */
		pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].AssocCurrState;

	if(PeerDisassocSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, &Reason))
	{
		if (MAC_ADDR_EQUAL(pAd->ApCfg.ApCliTab[ifIndex].MlmeAux.Bssid, Addr2))
		{
			*pCurrState = APCLI_ASSOC_IDLE;

#ifdef MAC_REPEATER_SUPPORT
			ifIndex = (USHORT)(Elem->Priv);
#endif /* MAC_REPEATER_SUPPORT */
			MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PEER_DISCONNECT_REQ, 0, NULL, ifIndex);
#ifdef MAC_REPEATER_SUPPORT
			if ((pAd->ApCfg.bMACRepeaterEn == TRUE) && (ifIndex >= 64))
			{
				RTMP_MLME_HANDLER(pAd);
				ifIndex = ((ifIndex - 64) / 16);
				//RTMPRemoveRepeaterEntry(pAd, ifIndex, CliIdx);
			}
#endif /* MAC_REPEATER_SUPPORT */
        }
    }
    else
    {
        DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - ApCliPeerDisassocAction() sanity check fail\n"));
    }
	
	return;
}
开发者ID:jing-git，项目名称:rt-n56u-1，代码行数:65，代码来源:apcli_assoc.c

示例5: ApCliSiteSurvey

VOID ApCliSiteSurvey(
	IN	RTMP_ADAPTER  		*pAd,
	IN	UCHAR			ifIndex,
	IN	NDIS_802_11_SSID	*pSsid,
	IN	UCHAR				ScanType,
	IN	BOOLEAN				ChannelSel)
{
	MLME_SCAN_REQ_STRUCT    ScanReq;

	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
	{
		/*	
		* Still scanning, ignore this scan.
		*/
		DBGPRINT(RT_DEBUG_TRACE, ("ApCliSiteSurvey:: scanning now\n"));
		return;
	}

	if(ifIndex >= MAX_APCLI_NUM)
		return;

#ifdef WSC_AP_SUPPORT
    if ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode != WSC_DISABLE) &&
    	(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == TRUE))
    {
       DBGPRINT(RT_DEBUG_TRACE, ("%s(): Stop scanning due to WPS triggered!\n",__FUNCTION__));
       return;
    }
#endif /* WSC_AP_SUPPORT */

	AsicDisableSync(pAd);

#ifdef AP_PARTIAL_SCAN_SUPPORT
	if (((pAd->ApCfg.bPartialScanning == TRUE) && (pAd->ApCfg.LastPartialScanChannel == 0)) ||
		(pAd->ApCfg.bPartialScanning == FALSE))
#endif /* AP_PARTIAL_SCAN_SUPPORT */
	{
		BssTableInit(&pAd->ScanTab);
	}
	pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE;
	pAd->ApCfg.ApCliTab[ifIndex].SyncCurrState = APCLI_SYNC_IDLE;

	RTMPZeroMemory(ScanReq.Ssid, MAX_LEN_OF_SSID);
	ScanReq.SsidLen = 0;
	if (pSsid)
	{
	    ScanReq.SsidLen = pSsid->SsidLength;
	    NdisMoveMemory(ScanReq.Ssid, pSsid->Ssid, pSsid->SsidLength);
	}
    ScanReq.BssType = BSS_ANY;
    ScanReq.ScanType = ScanType;
    pAd->ApCfg.bAutoChannelAtBootup = ChannelSel;
    
    MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq, 0);
    RTMP_MLME_HANDLER(pAd);
}
开发者ID:andy-padavan，项目名称:rt-n56u，代码行数:56，代码来源:apcli_sync.c

示例6: BAOriSessionSetupTimeout

/*
	==========================================================================
	Description:
		Retry sending ADDBA Reqest.
		
	IRQL = DISPATCH_LEVEL
	
	Parametrs:
	p8023Header: if this is already 802.3 format, p8023Header is NULL
	
	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
				FALSE , then continue indicaterx at this moment.
	==========================================================================
 */
VOID BAOriSessionSetupTimeout(
    IN PVOID SystemSpecific1, 
    IN PVOID FunctionContext, 
    IN PVOID SystemSpecific2, 
    IN PVOID SystemSpecific3) 
{
	BA_ORI_ENTRY    *pBAEntry = (BA_ORI_ENTRY *)FunctionContext;
	MAC_TABLE_ENTRY *pEntry;
	PRTMP_ADAPTER   pAd;
	
	if (pBAEntry == NULL)
		return;

	pAd = pBAEntry->pAdapter;

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		// Do nothing if monitor mode is on
		if (MONITOR_ON(pAd))
			return;
	}
#endif // CONFIG_STA_SUPPORT //
    
#ifdef RALINK_ATE
	// Nothing to do in ATE mode. 
	if (ATE_ON(pAd))
		return;
#endif // RALINK_ATE //

	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];

	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY))
	{
		MLME_ADDBA_REQ_STRUCT    AddbaReq;  
	
		NdisZeroMemory(&AddbaReq, sizeof(AddbaReq));
		COPY_MAC_ADDR(AddbaReq.pAddr, pEntry->Addr);
		AddbaReq.Wcid = (UCHAR)(pEntry->Aid);
		AddbaReq.TID = pBAEntry->TID;
		AddbaReq.BaBufSize = pAd->CommonCfg.BACapability.field.RxBAWinLimit;
		AddbaReq.TimeOutValue = 0;
		AddbaReq.Token = pBAEntry->Token;       
		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE, sizeof(MLME_ADDBA_REQ_STRUCT), (PVOID)&AddbaReq);
		RTMP_MLME_HANDLER(pAd);
		DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) : Send ADD BA again\n", pBAEntry->Token));

		pBAEntry->Token++;
		RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
	}
	else
	{
		BATableFreeOriEntry(pAd, pEntry->BAOriWcidArray[pBAEntry->TID]);
	}
}
开发者ID:acassis，项目名称:emlinux-ssd1935，代码行数:69，代码来源:ba_action.c

示例7: NeighborTableUpdate

VOID NeighborTableUpdate(
	IN PRTMP_ADAPTER pAd)
{

	INT i;
	PMESH_NEIGHBOR_TAB pNeighborTab = pAd->MeshTab.pMeshNeighborTab;
	PMESH_NEIGHBOR_ENTRY pNeighborEntry = NULL;
	ULONG Now;

	if(pNeighborTab == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("pAd->MeshTab.pMeshNeighborTab equal NULL.\n"));
		return;
	}

	for (i = 0; i < MAX_NEIGHBOR_MP; i++)
	{
		pNeighborEntry = &pAd->MeshTab.pMeshNeighborTab->NeighborMP[i];
		if (pNeighborEntry->Valid == FALSE)
			continue;

		NdisGetSystemUpTime(&Now);
		/*if ((++pNeighborEntry->IdleCnt > NEIGHBOR_MP_IDLE_CNT)) */
		if(RTMP_TIME_AFTER(Now, pNeighborEntry->LastBeaconTime + (MESH_NEIGHBOR_BEACON_IDLE_TIME * OS_HZ / 1000) ))
		{
			if (MeshValid(&pAd->MeshTab)
				&& (pNeighborEntry->State == CANDIDATE_MP)
				&& (PeerLinkValidCheck(pAd, pNeighborEntry->MeshLinkIdx) == TRUE))
			{
				MlmeEnqueue(pAd, MESH_LINK_MNG_STATE_MACHINE, MESH_LINK_MNG_CNCL, 0, NULL, pNeighborEntry->MeshLinkIdx);
			}
			if ( (pAd->MeshTab.UCGEnable && pNeighborEntry->Channel == pAd->MeshTab.MeshChannel)
				|| !pAd->MeshTab.UCGEnable)
				DeleteNeighborMP(pAd, pNeighborEntry->PeerMac);
		}
		else
		{
			if (VALID_MESH_LINK_ID(pNeighborEntry->MeshLinkIdx))
			{
				if ((pNeighborEntry->State == LINK_AVAILABLE)
					&& (pNeighborEntry->ExtChOffset != pAd->MeshTab.MeshLink[pNeighborEntry->MeshLinkIdx].Entry.ExtChOffset))
				{
					DBGPRINT(RT_DEBUG_TRACE, ("Link%d:Neighbor ExtChOffset change from %d to %d , kill the link!\n"
						,pNeighborEntry->MeshLinkIdx
						,pNeighborEntry->ExtChOffset,pAd->MeshTab.MeshLink[pNeighborEntry->MeshLinkIdx].Entry.ExtChOffset));
					MlmeEnqueue(pAd, MESH_LINK_MNG_STATE_MACHINE, MESH_LINK_MNG_CNCL, 0, NULL, pNeighborEntry->MeshLinkIdx);
					RTMP_MLME_HANDLER(pAd);
				}
			}
		}

	}

	return;
}
开发者ID:23171580，项目名称:ralink，代码行数:55，代码来源:mesh_ctrl.c

示例8: ApCliAuthTimeout

/*
	==========================================================================
	Description:
		function to be executed at timer thread when auth timer expires
	==========================================================================
 */
static VOID ApCliAuthTimeout(
	IN PVOID SystemSpecific1,
	IN PVOID FunctionContext,
	IN PVOID SystemSpecific2,
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	DBGPRINT(RT_DEBUG_TRACE, ("%s():AuthTimeout\n", __FUNCTION__));

	MlmeEnqueue(pAd, APCLI_AUTH_STATE_MACHINE, APCLI_MT2_AUTH_TIMEOUT, 0, NULL, 0);
	RTMP_MLME_HANDLER(pAd);

	return;
}
开发者ID:andy-padavan，项目名称:rt-n56u，代码行数:21，代码来源:apcli_auth.c

示例9: ApCliProbeTimeout

/* 
    ==========================================================================
    Description:
        Becaon timeout handler, executed in timer thread
    ==========================================================================
 */
static VOID ApCliProbeTimeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	DBGPRINT(RT_DEBUG_TRACE, ("ApCli_SYNC - ProbeReqTimeout\n"));

	MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_PROBE_TIMEOUT, 0, NULL, 0);
	RTMP_MLME_HANDLER(pAd);

	return;
}
开发者ID:jing-git，项目名称:rt-n56u，代码行数:21，代码来源:apcli_sync.c

示例10: ApCliAssocTimeout

/*
    ==========================================================================
    Description:
        Association timeout procedure. After association timeout, this function 
        will be called and it will put a message into the MLME queue
    Parameters:
        Standard timer parameters
    ==========================================================================
 */
static VOID ApCliAssocTimeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - enqueue APCLI_MT2_ASSOC_TIMEOUT \n"));

	MlmeEnqueue(pAd, APCLI_ASSOC_STATE_MACHINE, APCLI_MT2_ASSOC_TIMEOUT, 0, NULL, 0);
	RTMP_MLME_HANDLER(pAd);

	return;
}
开发者ID:aircross，项目名称:ray，代码行数:24，代码来源:p2pcli_assoc.c

示例11: BAOriSessionSetupTimeout

/*
	==========================================================================
	Description:
		Retry sending ADDBA Reqest.

	IRQL = DISPATCH_LEVEL

	Parametrs:
	p8023Header: if this is already 802.3 format, p8023Header is NULL

	Return	: TRUE if put into rx reordering buffer, shouldn't indicaterxhere.
				FALSE , then continue indicaterx at this moment.
	==========================================================================
 */
void BAOriSessionSetupTimeout(void *SystemSpecific1,
			      void *FunctionContext,
			      void *SystemSpecific2,
			      void *SystemSpecific3)
{
	struct rt_ba_ori_entry *pBAEntry = (struct rt_ba_ori_entry *)FunctionContext;
	struct rt_mac_table_entry *pEntry;
	struct rt_rtmp_adapter *pAd;

	if (pBAEntry == NULL)
		return;

	pAd = pBAEntry->pAdapter;

	{
		/* Do nothing if monitor mode is on */
		if (MONITOR_ON(pAd))
			return;
	}

	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];

	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes)
	    && (pBAEntry->Token < ORI_SESSION_MAX_RETRY)) {
		struct rt_mlme_addba_req AddbaReq;

		NdisZeroMemory(&AddbaReq, sizeof(AddbaReq));
		COPY_MAC_ADDR(AddbaReq.pAddr, pEntry->Addr);
		AddbaReq.Wcid = (u8)(pEntry->Aid);
		AddbaReq.TID = pBAEntry->TID;
		AddbaReq.BaBufSize =
		    pAd->CommonCfg.BACapability.field.RxBAWinLimit;
		AddbaReq.TimeOutValue = 0;
		AddbaReq.Token = pBAEntry->Token;
		MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE,
			    sizeof(struct rt_mlme_addba_req), (void *)& AddbaReq);
		RTMP_MLME_HANDLER(pAd);
		DBGPRINT(RT_DEBUG_TRACE,
			 ("BA Ori Session Timeout(%d) : Send ADD BA again\n",
			  pBAEntry->Token));

		pBAEntry->Token++;
		RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
	} else {
		BATableFreeOriEntry(pAd, pEntry->BAOriWcidArray[pBAEntry->TID]);
	}
}
开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:61，代码来源:ba_action.c

示例12: ApCliProbeTimeout

/* 
    ==========================================================================
    Description:
        Becaon timeout handler, executed in timer thread
    ==========================================================================
 */
static VOID ApCliProbeTimeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
	PAPCLI_STRUCT pApCliEntry = (APCLI_STRUCT *)FunctionContext;
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pApCliEntry->pAd;

	DBGPRINT(RT_DEBUG_TRACE, ("ApCli_SYNC - ProbeReqTimeout\n"));

#ifndef APCLI_CONNECTION_TRIAL
	MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_PROBE_TIMEOUT, 0, NULL, 0);
#else
	MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_PROBE_TIMEOUT, 0, NULL, pApCliEntry->ifIndex);
#endif /* APCLI_CONNECTION_TRIAL */
	RTMP_MLME_HANDLER(pAd);

	return;
}
开发者ID:jing-git，项目名称:rt-n56u，代码行数:26，代码来源:apcli_sync.c

示例13: AuthTimeout

void AuthTimeout(void *SystemSpecific1,
		 void *FunctionContext,
		 void *SystemSpecific2, void *SystemSpecific3)
{
	struct rt_rtmp_adapter *pAd = (struct rt_rtmp_adapter *)FunctionContext;

	DBGPRINT(RT_DEBUG_TRACE, ("AUTH - AuthTimeout\n"));

	/* Do nothing if the driver is starting halt state. */
	/* This might happen when timer already been fired before cancel timer with mlmehalt */
	if (RTMP_TEST_FLAG
	    (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
		return;

	/* send a de-auth to reset AP's state machine (Patch AP-Dir635) */
	if (pAd->Mlme.AuthMachine.CurrState == AUTH_WAIT_SEQ2)
		Cls2errAction(pAd, pAd->MlmeAux.Bssid);

	MlmeEnqueue(pAd, AUTH_STATE_MACHINE, MT2_AUTH_TIMEOUT, 0, NULL);
	RTMP_MLME_HANDLER(pAd);
}
开发者ID:flwh，项目名称:Alcatel_OT_985_kernel，代码行数:21，代码来源:auth.c

示例14: ApCliTrialConnectPhase2Timeout

static VOID ApCliTrialConnectPhase2Timeout(
	IN PVOID SystemSpecific1, 
	IN PVOID FunctionContext, 
	IN PVOID SystemSpecific2, 
	IN PVOID SystemSpecific3)
{
	PAPCLI_STRUCT pApCliEntry = (APCLI_STRUCT *)FunctionContext;
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)pApCliEntry->pAd;
	MLME_ASSOC_REQ_STRUCT  AssocReq;
	UCHAR ifIndex = pApCliEntry->ifIndex;
	UCHAR BBPValue;
	struct wifi_dev *wdev;
	wdev = &pApCliEntry->wdev;
	
	DBGPRINT(RT_DEBUG_TRACE, ("ApCli_SYNC - %s,\n \
			Jump back to trial channel:%d\n \
			to issue Assoc Req to new root AP\n",
			__func__, pApCliEntry->TrialCh));

	if (pApCliEntry->TrialCh != pAd->CommonCfg.CentralChannel) {
		/* Let BBP register at 20MHz */
		AsicDisableSync(pAd);//disable beacon
		AsicSwitchChannel(pAd, pApCliEntry->TrialCh, TRUE);
		//andes_switch_channel(pAd, pApCliEntry->TrialCh, 0, 0, 0x202, 0);//woody
	}
	ApCliLinkDown(pAd, ifIndex);
	if (wdev->AuthMode >= Ndis802_11AuthModeWPA)
		RTMPSetTimer(&(pApCliEntry->TrialConnectRetryTimer), 800);
	else
		RTMPSetTimer(&(pApCliEntry->TrialConnectRetryTimer), TRIAL_TIMEOUT);

	AssocParmFill(pAd, &AssocReq, pAd->ApCfg.ApCliTab[pApCliEntry->ifIndex].MlmeAux.Bssid, pAd->ApCfg.ApCliTab[pApCliEntry->ifIndex].MlmeAux.CapabilityInfo,
				ASSOC_TIMEOUT, 5);

	MlmeEnqueue(pAd, APCLI_ASSOC_STATE_MACHINE, APCLI_MT2_MLME_ASSOC_REQ,
				sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq, pApCliEntry->ifIndex);
	RTMP_MLME_HANDLER(pAd);

	return;
}
开发者ID:rizi-456，项目名称:mtabox，代码行数:40，代码来源:apcli_ctrl.c

示例15: FT_OTA_AuthTimeout

/*
    ==========================================================================
    Description:
        function to be executed at timer thread when auth timer expires
        
	IRQL = DISPATCH_LEVEL

    ==========================================================================
 */
VOID FT_OTA_AuthTimeout(
    IN PVOID SystemSpecific1, 
    IN PVOID FunctionContext, 
    IN PVOID SystemSpecific2, 
    IN PVOID SystemSpecific3) 
{
    RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
	USHORT Status;
    
    MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE,("FT_OTA_AUTH - FT_OTA_AuthTimeout\n"));
	
	/* Do nothing if the driver is starting halt state. */
	/* This might happen when timer already been fired before cancel timer with mlmehalt */
	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
		return;

	pAd->StaCfg.Dot11RCommInfo.FtRspSuccess = FT_OTA_RESPONSE;
    pAd->Mlme.FtOtaAuthMachine.CurrState = FT_OTA_AUTH_REQ_IDLE;
    Status = MLME_REJ_TIMEOUT;
    MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status, 0);
    RTMP_MLME_HANDLER(pAd);
}
开发者ID:andy-padavan，项目名称:rt-n56u，代码行数:31，代码来源:ft_auth.c


注：本文中的RTMP_MLME_HANDLER函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。