当前位置: 首页>>代码示例>>C++>>正文

C++ RTMP_INT_UNLOCK函数代码示例

本文整理汇总了C++中RTMP_INT_UNLOCK函数的典型用法代码示例。如果您正苦于以下问题：C++ RTMP_INT_UNLOCK函数的具体用法？C++ RTMP_INT_UNLOCK怎么用？C++ RTMP_INT_UNLOCK使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了RTMP_INT_UNLOCK函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: rx_done_tasklet

static void rx_done_tasklet(unsigned long data)
{
    unsigned long flags;
    struct rt_rtmp_adapter *pAd = (struct rt_rtmp_adapter *)data;
    BOOLEAN bReschedule = 0;
    struct os_cookie *pObj;

    /* Do nothing if the driver is starting halt state. */
    /* This might happen when timer already been fired before cancel timer with mlmehalt */
    if (RTMP_TEST_FLAG
            (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
        return;

    pObj = (struct os_cookie *)pAd->OS_Cookie;

    pAd->int_pending &= ~(INT_RX);
    bReschedule = STARxDoneInterruptHandle(pAd, 0);

    RTMP_INT_LOCK(&pAd->irq_lock, flags);
    /*
     * double check to avoid rotting packet
     */
    if (pAd->int_pending & INT_RX || bReschedule) {
        tasklet_hi_schedule(&pObj->rx_done_task);
        RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
        return;
    }

    /* enable Rxint again */
    rt2860_int_enable(pAd, INT_RX);
    RTMP_INT_UNLOCK(&pAd->irq_lock, flags);

}
开发者ID:sandrico555，项目名称:android_kernel_jena_msm7x27a，代码行数:33，代码来源:rt_pci_rbus.c

示例2: fifo_statistic_full_tasklet

void fifo_statistic_full_tasklet(unsigned long data)
{
    unsigned long flags;
    struct rt_rtmp_adapter *pAd = (struct rt_rtmp_adapter *)data;
    struct os_cookie *pObj;

    /* Do nothing if the driver is starting halt state. */
    /* This might happen when timer already been fired before cancel timer with mlmehalt */
    if (RTMP_TEST_FLAG
            (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
        return;

    pObj = (struct os_cookie *)pAd->OS_Cookie;

    pAd->int_pending &= ~(FifoStaFullInt);
    NICUpdateFifoStaCounters(pAd);

    RTMP_INT_LOCK(&pAd->irq_lock, flags);
    /*
     * double check to avoid rotting packet
     */
    if (pAd->int_pending & FifoStaFullInt) {
        tasklet_hi_schedule(&pObj->fifo_statistic_full_task);
        RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
        return;
    }

    /* enable Rxint again */

    rt2860_int_enable(pAd, FifoStaFullInt);
    RTMP_INT_UNLOCK(&pAd->irq_lock, flags);

}
开发者ID:sandrico555，项目名称:android_kernel_jena_msm7x27a，代码行数:33，代码来源:rt_pci_rbus.c

示例3: RtmpTimerQRemove

BOOLEAN RtmpTimerQRemove(struct rt_rtmp_adapter *pAd, struct rt_ralink_timer *pTimer)
{
	struct rt_rtmp_timer_task_entry *pNode, *pPrev = NULL;
	unsigned long irqFlags;

	RTMP_INT_LOCK(&pAd->TimerQLock, irqFlags);
	if (pAd->TimerQ.status >= RTMP_TASK_STAT_INITED) {
		pNode = pAd->TimerQ.pQHead;
		while (pNode) {
			if (pNode->pRaTimer == pTimer)
				break;
			pPrev = pNode;
			pNode = pNode->pNext;
		}

		/* Now move it to freeList queue. */
		if (pNode) {
			if (pNode == pAd->TimerQ.pQHead)
				pAd->TimerQ.pQHead = pNode->pNext;
			if (pNode == pAd->TimerQ.pQTail)
				pAd->TimerQ.pQTail = pPrev;
			if (pPrev != NULL)
				pPrev->pNext = pNode->pNext;

			/* return this queue entry to timerQFreeList. */
			pNode->pNext = pAd->TimerQ.pQPollFreeList;
			pAd->TimerQ.pQPollFreeList = pNode;
		}
	}
	RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlags);

	return TRUE;
}
开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:33，代码来源:rtmp_timer.c

示例4: RtmpTimerQRemove

BOOLEAN RtmpTimerQRemove(RTMP_ADAPTER *pAd, RALINK_TIMER_STRUCT *pTimer)
{
	RTMP_TIMER_TASK_ENTRY *pNode, *pPrev = NULL;
	unsigned long irqFlags;

	RTMP_INT_LOCK(&pAd->TimerQLock, irqFlags);
	if (pAd->TimerQ.status >= RTMP_TASK_STAT_INITED) {
		pNode = pAd->TimerQ.pQHead;
		while (pNode) {
			if (pNode->pRaTimer == pTimer)
				break;
			pPrev = pNode;
			pNode = pNode->pNext;
		}

		/* Now move it to freeList queue.*/
		if (pNode) {
			if (pNode == pAd->TimerQ.pQHead)
				pAd->TimerQ.pQHead = pNode->pNext;
			if (pNode == pAd->TimerQ.pQTail)
				pAd->TimerQ.pQTail = pPrev;
			if (pPrev != NULL)
				pPrev->pNext = pNode->pNext;

			/* return this queue entry to timerQFreeList.*/
			pNode->pNext = pAd->TimerQ.pQPollFreeList;
			pAd->TimerQ.pQPollFreeList = pNode;
		}
	}
	RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlags);

	return TRUE;
}
开发者ID:BenMueller，项目名称:netgear-a6210-driver-dkms，代码行数:33，代码来源:rtmp_timer.c

示例5: rtmp_wdev_idx_unreg

INT rtmp_wdev_idx_unreg(RTMP_ADAPTER *pAd, struct wifi_dev *wdev)
{
	INT idx;
	ULONG flags;

	if (!wdev)
		return -1;

	RTMP_INT_LOCK(&pAd->irq_lock, flags);
	for (idx = 0; idx < WDEV_NUM_MAX; idx++) {
		if (pAd->wdev_list[idx] == wdev) {
			DBGPRINT(RT_DEBUG_WARN, 
					("unregister wdev(type:%d, idx:%d) from wdev_list\n",
					wdev->wdev_type, wdev->wdev_idx));
			pAd->wdev_list[idx] = NULL;
			wdev->wdev_idx = WDEV_NUM_MAX;
			break;
		}
	}

	if (idx == WDEV_NUM_MAX) {
		DBGPRINT(RT_DEBUG_ERROR, 
					("Cannot found wdev(%p, type:%d, idx:%d) in wdev_list\n",
					wdev, wdev->wdev_type, wdev->wdev_idx));
		DBGPRINT(RT_DEBUG_OFF, ("Dump wdev_list:\n"));
		for (idx = 0; idx < WDEV_NUM_MAX; idx++) {
			DBGPRINT(RT_DEBUG_OFF, ("Idx %d: 0x%p\n", idx, pAd->wdev_list[idx]));
		}
	}
	RTMP_INT_UNLOCK(&pAd->irq_lock, flags);

	return ((idx < WDEV_NUM_MAX) ? 0 : -1);

}
开发者ID:jing-git，项目名称:rt-n56u-1，代码行数:34，代码来源:wdev.c

示例6: rtmp_wdev_idx_reg

INT rtmp_wdev_idx_reg(RTMP_ADAPTER *pAd, struct wifi_dev *wdev)
{
	INT idx;
	ULONG flags;

	if (!wdev)
		return -1;

	RTMP_INT_LOCK(&pAd->irq_lock, flags);
	for (idx = 0; idx < WDEV_NUM_MAX; idx++) {
		if (pAd->wdev_list[idx] == wdev) {
			DBGPRINT(RT_DEBUG_WARN, 
					("wdev(type:%d) already registered and idx(%d) %smatch\n",
					wdev->wdev_type, wdev->wdev_idx, 
					((idx != wdev->wdev_idx) ? "mis" : "")));
			break;
		}
		if (pAd->wdev_list[idx] == NULL) {
			pAd->wdev_list[idx] = wdev;
			break;
		}
	}

	wdev->wdev_idx = idx;
	if (idx < WDEV_NUM_MAX) {
		DBGPRINT(RT_DEBUG_TRACE, ("Assign wdev_idx=%d\n", idx));
	}
	RTMP_INT_UNLOCK(&pAd->irq_lock, flags);

	return ((idx < WDEV_NUM_MAX) ? idx : -1);
}
开发者ID:jing-git，项目名称:rt-n56u-1，代码行数:31，代码来源:wdev.c

示例7: RTMP_INT_LOCK

RTMP_TIMER_TASK_ENTRY *RtmpTimerQInsert(RTMP_ADAPTER *pAd,
	RALINK_TIMER_STRUCT *pTimer)
{
	RTMP_TIMER_TASK_ENTRY *pQNode = NULL, *pQTail;
	unsigned long irqFlags;
	RTMP_OS_TASK *pTask = &pAd->timerTask;

	RTMP_INT_LOCK(&pAd->TimerQLock, irqFlags);
	if (pAd->TimerQ.status & RTMP_TASK_CAN_DO_INSERT) {
		if(pAd->TimerQ.pQPollFreeList) {
			pQNode = pAd->TimerQ.pQPollFreeList;
			pAd->TimerQ.pQPollFreeList = pQNode->pNext;

			pQNode->pRaTimer = pTimer;
			pQNode->pNext = NULL;

			pQTail = pAd->TimerQ.pQTail;
			if (pAd->TimerQ.pQTail != NULL)
				pQTail->pNext = pQNode;
			pAd->TimerQ.pQTail = pQNode;
			if (pAd->TimerQ.pQHead == NULL)
				pAd->TimerQ.pQHead = pQNode;
		}
	}
	RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlags);

	if (pQNode) {
		RTMP_OS_TASK_WAKE_UP(pTask);
	}

	return pQNode;
}
开发者ID:BenMueller，项目名称:netgear-a6210-driver-dkms，代码行数:32，代码来源:rtmp_timer.c

示例8: RtmpTimerQHandle

static void RtmpTimerQHandle(RTMP_ADAPTER *pAd)
{
	int status;
	RALINK_TIMER_STRUCT *pTimer;
	RTMP_TIMER_TASK_ENTRY *pEntry;
	unsigned long	irqFlag;
	RTMP_OS_TASK *pTask;

	pTask = &pAd->timerTask;
	while(!RTMP_OS_TASK_IS_KILLED(pTask))
	{
		pTimer = NULL;

		if (RtmpOSTaskWait(pAd, pTask, &status) == FALSE)
		{
			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
			break;
		}

		if (pAd->TimerQ.status == RTMP_TASK_STAT_STOPED)
			break;

		/* event happened.*/
		while(pAd->TimerQ.pQHead)
		{
			RTMP_INT_LOCK(&pAd->TimerQLock, irqFlag);
			pEntry = pAd->TimerQ.pQHead;
			if (pEntry)
			{
				pTimer = pEntry->pRaTimer;

				/* update pQHead*/
				pAd->TimerQ.pQHead = pEntry->pNext;
				if (pEntry == pAd->TimerQ.pQTail)
					pAd->TimerQ.pQTail = NULL;

				/* return this queue entry to timerQFreeList.*/
				pEntry->pNext = pAd->TimerQ.pQPollFreeList;
				pAd->TimerQ.pQPollFreeList = pEntry;
			}
			RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlag);

			if (pTimer)
			{
				if ((pTimer->handle != NULL) && (!pAd->PM_FlgSuspend))
					pTimer->handle(NULL, (PVOID) pTimer->cookie, NULL, pTimer);
				if ((pTimer->Repeat) && (pTimer->State == FALSE))
					RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue);
			}
		}

		if (status != 0)
		{
			pAd->TimerQ.status = RTMP_TASK_STAT_STOPED;
			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
			break;
		}
	}
}
开发者ID:eager7，项目名称:linux-kernel，代码行数:59，代码来源:rtmp_timer.c

示例9: ac0_dma_done_tasklet

static void ac0_dma_done_tasklet(unsigned long data)
{
    unsigned long flags;
    struct rt_rtmp_adapter *pAd = (struct rt_rtmp_adapter *)data;
    INT_SOURCE_CSR_STRUC IntSource;
    struct os_cookie *pObj;
    BOOLEAN bReschedule = 0;

    /* Do nothing if the driver is starting halt state. */
    /* This might happen when timer already been fired before cancel timer with mlmehalt */
    if (RTMP_TEST_FLAG
            (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
        return;

    pObj = (struct os_cookie *)pAd->OS_Cookie;

    /*      printk("ac0_dma_done_process\n"); */
    IntSource.word = 0;
    IntSource.field.Ac0DmaDone = 1;
    pAd->int_pending &= ~INT_AC0_DLY;

    /*      RTMPHandleMgmtRingDmaDoneInterrupt(pAd); */
    bReschedule = RTMPHandleTxRingDmaDoneInterrupt(pAd, IntSource);

    RTMP_INT_LOCK(&pAd->irq_lock, flags);
    /*
     * double check to avoid lose of interrupts
     */
    if ((pAd->int_pending & INT_AC0_DLY) || bReschedule) {
        tasklet_hi_schedule(&pObj->ac0_dma_done_task);
        RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
        return;
    }

    /* enable TxDataInt again */
    rt2860_int_enable(pAd, INT_AC0_DLY);
    RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
}
开发者ID:sandrico555，项目名称:android_kernel_jena_msm7x27a，代码行数:38，代码来源:rt_pci_rbus.c

示例10: mgmt_dma_done_tasklet

/***************************************************************************
  *
  *	tasklet related procedures.
  *
  **************************************************************************/
static void mgmt_dma_done_tasklet(unsigned long data)
{
    unsigned long flags;
    struct rt_rtmp_adapter *pAd = (struct rt_rtmp_adapter *)data;
    INT_SOURCE_CSR_STRUC IntSource;
    struct os_cookie *pObj;

    /* Do nothing if the driver is starting halt state. */
    /* This might happen when timer already been fired before cancel timer with mlmehalt */
    if (RTMP_TEST_FLAG
            (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
        return;

    pObj = (struct os_cookie *)pAd->OS_Cookie;

    /*      printk("mgmt_dma_done_process\n"); */
    IntSource.word = 0;
    IntSource.field.MgmtDmaDone = 1;
    pAd->int_pending &= ~INT_MGMT_DLY;

    RTMPHandleMgmtRingDmaDoneInterrupt(pAd);

    /* if you use RTMP_SEM_LOCK, sometimes kernel will hang up, without any */
    /* bug report output */
    RTMP_INT_LOCK(&pAd->irq_lock, flags);
    /*
     * double check to avoid lose of interrupts
     */
    if (pAd->int_pending & INT_MGMT_DLY) {
        tasklet_hi_schedule(&pObj->mgmt_dma_done_task);
        RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
        return;
    }

    /* enable TxDataInt again */
    rt2860_int_enable(pAd, INT_MGMT_DLY);
    RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
}
开发者ID:sandrico555，项目名称:android_kernel_jena_msm7x27a，代码行数:43，代码来源:rt_pci_rbus.c

示例11: rtmp_wdev_idx_find_by_p2p_ifaddr

INT rtmp_wdev_idx_find_by_p2p_ifaddr(RTMP_ADAPTER *pAd, UCHAR *ifAddr)
{
        INT idx, type;
        ULONG flags;
	PNET_DEV if_dev = NULL;
	struct wifi_dev *wdev = NULL;

        if (!ifAddr)
                return -1;

        RTMP_INT_LOCK(&pAd->irq_lock, flags);
        for (idx = 0; idx < WDEV_NUM_MAX; idx++) {
		wdev = pAd->wdev_list[idx];
		if (!wdev)
                        continue;

		if_dev = wdev->if_dev;
		if (!if_dev)
			continue;

		if (!if_dev->ieee80211_ptr)
			continue;

		type = if_dev->ieee80211_ptr->iftype;

		if ( RTMPEqualMemory(wdev->if_addr, ifAddr, MAC_ADDR_LEN) &&
		    ( type == RT_CMD_80211_IFTYPE_P2P_CLIENT || 
                      type == RT_CMD_80211_IFTYPE_P2P_GO ||
                      type == RT_CMD_80211_IFTYPE_P2P_DEVICE
		    ))	
		{
                        //MTWF_LOG(DBG_CAT_ALL, DBG_LVL_INFO,
                        //                ("find the  wdev(type:%d, idx:%d) from wdev_list\n",
                        //                pAd->wdev_list[idx]->wdev_type, pAd->wdev_list[idx]->wdev_idx));
                        break;
                }
        }

        RTMP_INT_UNLOCK(&pAd->irq_lock, flags);

	return ((idx < WDEV_NUM_MAX) ? idx : -1);
}
开发者ID:jing-git，项目名称:rt-n56u-1，代码行数:42，代码来源:wdev.c

示例12: RtmpTimerQExit

void RtmpTimerQExit(struct rt_rtmp_adapter *pAd)
{
	struct rt_rtmp_timer_task_entry *pTimerQ;
	unsigned long irqFlags;

	RTMP_INT_LOCK(&pAd->TimerQLock, irqFlags);
	while (pAd->TimerQ.pQHead) {
		pTimerQ = pAd->TimerQ.pQHead;
		pAd->TimerQ.pQHead = pTimerQ->pNext;
		/* remove the timeQ */
	}
	pAd->TimerQ.pQPollFreeList = NULL;
	os_free_mem(pAd, pAd->TimerQ.pTimerQPoll);
	pAd->TimerQ.pQTail = NULL;
	pAd->TimerQ.pQHead = NULL;
#ifndef KTHREAD_SUPPORT
	pAd->TimerQ.status = RTMP_TASK_STAT_STOPED;
#endif
	RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlags);

}
开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:21，代码来源:rtmp_timer.c

示例13: RtmpTimerQExit

void RtmpTimerQExit(RTMP_ADAPTER *pAd)
{
	RTMP_TIMER_TASK_ENTRY *pTimerQ;
	unsigned long irqFlags;

	RTMP_INT_LOCK(&pAd->TimerQLock, irqFlags);
	while (pAd->TimerQ.pQHead) {
		pTimerQ = pAd->TimerQ.pQHead;
		pAd->TimerQ.pQHead = pTimerQ->pNext;
		/* remove the timeQ*/
	}
	pAd->TimerQ.pQPollFreeList = NULL;
	os_free_mem(pAd->TimerQ.pTimerQPoll);
	pAd->TimerQ.pQTail = NULL;
	pAd->TimerQ.pQHead = NULL;
/*#ifndef KTHREAD_SUPPORT*/
	pAd->TimerQ.status = RTMP_TASK_STAT_STOPPED;
/*#endif*/
	RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlags);
/*	NdisFreeSpinLock(&pAd->TimerQLock); */
}
开发者ID:BenMueller，项目名称:netgear-a6210-driver-dkms，代码行数:21，代码来源:rtmp_timer.c

示例14: RTMP_INT_LOCK

struct rt_rtmp_timer_task_entry *RtmpTimerQInsert(struct rt_rtmp_adapter *pAd,
					struct rt_ralink_timer *pTimer)
{
	struct rt_rtmp_timer_task_entry *pQNode = NULL, *pQTail;
	unsigned long irqFlags;
	struct rt_rtmp_os_task *pTask = &pAd->timerTask;

	RTMP_INT_LOCK(&pAd->TimerQLock, irqFlags);
	if (pAd->TimerQ.status & RTMP_TASK_CAN_DO_INSERT) {
		if (pAd->TimerQ.pQPollFreeList) {
			pQNode = pAd->TimerQ.pQPollFreeList;
			pAd->TimerQ.pQPollFreeList = pQNode->pNext;

			pQNode->pRaTimer = pTimer;
			pQNode->pNext = NULL;

			pQTail = pAd->TimerQ.pQTail;
			if (pAd->TimerQ.pQTail != NULL)
				pQTail->pNext = pQNode;
			pAd->TimerQ.pQTail = pQNode;
			if (pAd->TimerQ.pQHead == NULL)
				pAd->TimerQ.pQHead = pQNode;
		}
	}
	RTMP_INT_UNLOCK(&pAd->TimerQLock, irqFlags);

	if (pQNode) {
#ifdef KTHREAD_SUPPORT
		WAKE_UP(pTask);
#else
		RTMP_SEM_EVENT_UP(&pTask->taskSema);
#endif
	}

	return pQNode;
}
开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:36，代码来源:rtmp_timer.c

示例15: CMDHandler


//.........这里部分代码省略.........
						MACValue &= (~0x80000);
						RTUSBWriteMACRegister(pAd, USB_DMA_CFG, MACValue);
						DBGPRINT(RT_DEBUG_TRACE, ("\tSet 0x2a0 bit19. Clear USB DMA TX path\n"));
						
						// Wait 5ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007
						//RTMPusecDelay(5000);

						if ((pAd->bulkResetPipeid & BULKOUT_MGMT_RESET_FLAG) == BULKOUT_MGMT_RESET_FLAG)
						{
							RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
							if (pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE /* pMLMEContext->bWaitingBulkOut == TRUE */)
							{
								RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
							}
							RTUSBKickBulkOut(pAd);
							
							DBGPRINT(RT_DEBUG_TRACE, ("\tTX MGMT RECOVER Done!\n"));
						}
						else
						{
							pHTTXContext = &(pAd->TxContext[pAd->bulkResetPipeid]);
							//NdisAcquireSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
							RTMP_INT_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
							if ( pAd->BulkOutPending[pAd->bulkResetPipeid] == FALSE)
							{
								pAd->BulkOutPending[pAd->bulkResetPipeid] = TRUE;
								pHTTXContext->IRPPending = TRUE;
								pAd->watchDogTxPendingCnt[pAd->bulkResetPipeid] = 1;
								
								// no matter what, clean the flag
								RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
								
								//NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
								RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
#ifdef RALINK_ATE
								if(ATE_ON(pAd))				
							    {
									ret = ATEResetBulkOut(pAd);
								}
								else
#endif // RALINK_ATE //
								{
									RTUSBInitHTTxDesc(pAd, pHTTXContext, pAd->bulkResetPipeid, 
														pHTTXContext->BulkOutSize, 
														(usb_complete_t)RTUSBBulkOutDataPacketComplete);
								if((ret = RTUSB_SUBMIT_URB(pHTTXContext->pUrb))!=0)
								{
										RTMP_INT_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
									pAd->BulkOutPending[pAd->bulkResetPipeid] = FALSE;
									pHTTXContext->IRPPending = FALSE;
										pAd->watchDogTxPendingCnt[pAd->bulkResetPipeid] = 0;
										RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);

										DBGPRINT(RT_DEBUG_ERROR, ("CMDTHREAD_RESET_BULK_OUT:Submit Tx URB failed %d\n", ret));
								} 
									else
									{
										RTMP_INT_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
										DBGPRINT(RT_DEBUG_TRACE,("\tCMDTHREAD_RESET_BULK_OUT: TxContext[%d]:CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, pending=%d!\n", 
												pAd->bulkResetPipeid, pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition, 
												pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, 
												pAd->BulkOutPending[pAd->bulkResetPipeid]));
										DBGPRINT(RT_DEBUG_TRACE,("\t\tBulkOut Req=0x%lx, Complete=0x%lx, Other=0x%lx\n", 
															pAd->BulkOutReq, pAd->BulkOutComplete, pAd->BulkOutCompleteOther));
										RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
										DBGPRINT(RT_DEBUG_TRACE, ("\tCMDTHREAD_RESET_BULK_OUT: Submit Tx DATA URB for failed BulkReq(0x%lx) Done, status=%d!\n",
开发者ID:vanhoefm，项目名称:rt2870linux，代码行数:67，代码来源:rtusb_io.c


注：本文中的RTMP_INT_UNLOCK函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。