当前位置: 首页>>代码示例>>C++>>正文

C++ RES_K函数代码示例

本文整理汇总了C++中RES_K函数的典型用法代码示例。如果您正苦于以下问题：C++ RES_K函数的具体用法？C++ RES_K怎么用？C++ RES_K使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了RES_K函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: TTL_7404_INVERT

	TTL_7404_INVERT(ic_c4a, ic_b6a)

	TTL_7483(ic_b4, ic_a4c, ic_a4b, ic_b6a, low, ic_c4a, high, high, low, low)
	ALIAS(a6, ic_b4.S1)
	ALIAS(b6, ic_b4.S2)
	ALIAS(c6, ic_b4.S3)
	ALIAS(d6, ic_b4.S4)

	// ----------------------------------------------------------------------------------------
	// serve monoflop
	// ----------------------------------------------------------------------------------------

	TTL_7404_INVERT(f4_trig, rstspeed)

	RES(ic_f4_serve_R, RES_K(330))
	CAP(ic_f4_serve_C, CAP_U(4.7))
	NE555(ic_f4_serve)

	NET_C(ic_f4_serve.VCC, V5)
	NET_C(ic_f4_serve.GND, GND)
	NET_C(ic_f4_serve.RESET, V5)
	NET_C(ic_f4_serve_R.1, V5)
	NET_C(ic_f4_serve_R.2, ic_f4_serve.THRESH)
	NET_C(ic_f4_serve_R.2, ic_f4_serve.DISCH)
	NET_C(f4_trig, ic_f4_serve.TRIG)
	NET_C(ic_f4_serve_R.2, ic_f4_serve_C.1)
	NET_C(GND, ic_f4_serve_C.2)

	TTL_7427_NOR(ic_e5a, ic_f4_serve.OUT, StopG, runQ)
	TTL_7474(ic_b5b_serve, pad1, ic_e5a, ic_e5a, high)
开发者ID:dinkc64，项目名称:mame，代码行数:30，代码来源:nl_pong.c

示例2: SCREEN

	SCREEN(config, SCREEN_TAG, SCREEN_TYPE_RASTER);

	/* sound hardware */
	SPEAKER(config, "mono").front_center();

	SPEAKER_SOUND(config, m_speaker).add_route(ALL_OUTPUTS, "mono", 0.25);

	CDP1864(config, m_cti, 1.75_MHz_XTAL).set_screen(SCREEN_TAG);
	m_cti->inlace_cb().set_constant(0);
	m_cti->int_cb().set_inputline(m_maincpu, COSMAC_INPUT_LINE_INT);
	m_cti->dma_out_cb().set(FUNC(cosmicos_state::dmaout_w));
	m_cti->efx_cb().set(FUNC(cosmicos_state::efx_w));
	m_cti->rdata_cb().set_constant(1);
	m_cti->gdata_cb().set_constant(1);
	m_cti->bdata_cb().set_constant(1);
	m_cti->set_chrominance(RES_K(2), 0, 0, 0); // R2
	m_cti->add_route(ALL_OUTPUTS, "mono", 0.25);

	/* devices */
	MCFG_QUICKLOAD_ADD("quickload", cosmicos_state, cosmicos, "bin")
	CASSETTE(config, m_cassette);
	m_cassette->set_default_state(CASSETTE_STOPPED | CASSETTE_MOTOR_ENABLED | CASSETTE_SPEAKER_MUTED);

	/* internal ram */
	RAM(config, RAM_TAG).set_default_size("256").set_extra_options("4K,48K");
MACHINE_CONFIG_END

/* ROMs */

ROM_START( cosmicos )
	ROM_REGION( 0x1000, CDP1802_TAG, 0 )
开发者ID:fesh0r，项目名称:mame-full，代码行数:31，代码来源:cosmicos.cpp

示例3: RES_K

    if (rising_bits & 0x10) sample_start(state->m_samples, 2, 2, 0);		/* Balloon hit and bomb drops */

    state->m_c8080bw_flip_screen = data & 0x20;

    state->m_port_2_last_extra = data;
}



/*******************************************************/
/*                                                     */
/* Taito "Indian Battle"                               */
/* Sept 2005, D.R.                                     */
/*******************************************************/
static const discrete_dac_r1_ladder indianbt_music_dac =
{3, {0, RES_K(47), RES_K(12)}, 0, 0, 0, CAP_U(0.1)};

#define INDIANBT_MUSIC_CLK		(7680.0*2*2*2)

/* Nodes - Inputs */
#define INDIANBT_MUSIC_DATA		NODE_01
/* Nodes - Sounds */
#define INDIANBT_MUSIC			NODE_11

DISCRETE_SOUND_START(indianbt)

DISCRETE_INPUT_DATA (INDIANBT_MUSIC_DATA)

/******************************************************************************
 *
 * Music Generator
开发者ID:cdenix，项目名称:psmame，代码行数:31，代码来源:8080bw.c

示例4: CDP1864_INTERFACE

{
	m_efx = state;
}

static CDP1864_INTERFACE( cosmicos_cdp1864_intf )
{
	CDP1802_TAG,
	SCREEN_TAG,
	CDP1864_INTERLACED,
	DEVCB_LINE_VCC,
	DEVCB_LINE_VCC,
	DEVCB_LINE_VCC,
	DEVCB_CPU_INPUT_LINE(CDP1802_TAG, COSMAC_INPUT_LINE_INT),
	DEVCB_DRIVER_LINE_MEMBER(cosmicos_state, dmaout_w),
	DEVCB_DRIVER_LINE_MEMBER(cosmicos_state, efx_w),
	RES_K(2), // R2
	0, // not connected
	0, // not connected
	0  // not connected
};

bool cosmicos_state::screen_update(screen_device &screen, bitmap_t &bitmap, const rectangle &cliprect)
{
	cdp1864_update(m_cti, &bitmap, &cliprect);

	return 0;
}

/* CDP1802 Configuration */

READ_LINE_MEMBER( cosmicos_state::wait_r )
开发者ID:cdenix，项目名称:psmame，代码行数:31，代码来源:cosmicos.c

示例5: MACHINE_RESET

static MACHINE_RESET( nitedrvr )
{
	timer_pulse(PERIOD_OF_555_ASTABLE(RES_K(180), 330, CAP_U(1)), NULL, 0, nitedrvr_crash_toggle_callback);
	nitedrvr_register_machine_vars();
}
开发者ID:cdenix，项目名称:ps3-mame-0125，代码行数:5，代码来源:nitedrvr.c

示例6: RES_K

	16,         /* Bit Length */
	0,          /* Reset Value */
	6,          /* Use Bit 6 as XOR input 0 */
	14,         /* Use Bit 14 as XOR input 1 */
	DISC_LFSR_XNOR,     /* Feedback stage1 is XNOR */
	DISC_LFSR_OR,       /* Feedback stage2 is just stage 1 output OR with external feed */
	DISC_LFSR_REPLACE,  /* Feedback stage3 replaces the shifted register contents */
	0x000001,       /* Everything is shifted into the first bit only */
	0,          /* Output is already inverted by XNOR */
	16          /* Output bit is feedback bit */
};

static const discrete_dac_r1_ladder asteroid_thump_dac1 =
{
	4,          // size of ladder
	{RES_K(220), RES_K(100), RES_K(47), RES_K(22)}, //R44-R47
	4.3,        // 5v - diode junction
	RES_K(6.8), // R49
	RES_K(47),  // R44
	CAP_U(0.01) // C27
};

static const discrete_555_cc_desc asteroid_thump_555cc =
{
	DISC_555_OUT_SQW | DISC_555_OUT_AC | DISCRETE_555_CC_TO_CAP,
	5,      // B+ voltage of 555
	DEFAULT_555_VALUES,
	0.8     // VBE 2N3906 (Si)
};

#define ASTEROID_SAUCER_SND_EN      NODE_01
开发者ID:vorlenko，项目名称:mame，代码行数:31，代码来源:asteroid.c

示例7: TTL_7474_DIP

	TTL_7474_DIP(U3A) // FIXME: need 74LS family model (higher input impedance, half the sink capability)
	CD4016_DIP(U5D)

	NET_C(VCC, /*U3A.14,*/ U5D.14) // 7474 model doesn't have Vcc pin
	NET_C(GND, /*U3A.7,*/ U5D.7) // 7474 model doesn't have GND pin

	NET_C(VCC, U3A.10, U3A.11, U3A.12, U3A.13) // only half of this chip is used in this audio section - tie up the other inputs


	// ANAL1/IOA3/IOA4 -> RULLANTE/CASSA

	CAP(C61, CAP_U(10))
	CAP(C62, CAP_P(1000))
	CAP(C63, CAP_U(0.01))
	CAP(C68, CAP_U(0.1))
	RES(R84, RES_K(1.5))
	RES(R102, RES_K(10))
	RES(R103, RES_K(10))
	RES(R104, RES_K(120))
	RES(R105, RES_K(56))
	RES(R120, RES_K(47))
	RES(R121, 680) // incorrectly labelled R128 on schematic
	RES(R122, RES_K(33))
	RES(R123, RES_K(1))
	RES(R124, RES_K(39))
	RES(R125, RES_K(560))
	RES(R126, RES_K(470))
	RES(R127, RES_K(100))
	RES(R128, RES_K(56))
	RES(R129, RES_K(1))
	RES(R130, RES_K(33))
开发者ID:rfka01，项目名称:mame，代码行数:31，代码来源:nl_zac1b11142.cpp

示例8: MCFG_GFXDECODE_ADD

/* video hardware */
MCFG_GFXDECODE_ADD("gfxdecode", "palette", ccastles)
MCFG_PALETTE_ADD("palette", 32)

MCFG_SCREEN_ADD("screen", RASTER)
MCFG_SCREEN_RAW_PARAMS(PIXEL_CLOCK, HTOTAL, 0, HTOTAL - 1, VTOTAL, 0, VTOTAL - 1)   /* will be adjusted later */
MCFG_SCREEN_UPDATE_DRIVER(ccastles_state, screen_update_ccastles)
MCFG_SCREEN_PALETTE("palette")

/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")

MCFG_SOUND_ADD("pokey1", POKEY, MASTER_CLOCK/8)
/* NOTE: 1k + 0.2k is not 100% exact, but should not make an audible difference */
MCFG_POKEY_OUTPUT_OPAMP(RES_K(1) + RES_K(0.2), CAP_U(0.01), 5.0)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)

MCFG_SOUND_ADD("pokey2", POKEY, MASTER_CLOCK/8)
/* NOTE: 1k + 0.2k is not 100% exact, but should not make an audible difference */
MCFG_POKEY_OUTPUT_OPAMP(RES_K(1) + RES_K(0.2), CAP_U(0.01), 5.0)
MCFG_POKEY_ALLPOT_R_CB(IOPORT("IN1"))
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
MACHINE_CONFIG_END



/*************************************
 *
 *  ROM definitions
 *
开发者ID:Eduardop，项目名称:mame，代码行数:30，代码来源:ccastles.c

示例9: Z80

void gyruss_state::gyruss(machine_config &config)
{
	/* basic machine hardware */
	Z80(config, m_maincpu, MASTER_CLOCK/6);    /* 3.072 MHz */
	m_maincpu->set_addrmap(AS_PROGRAM, &gyruss_state::main_cpu1_map);

	KONAMI1(config, m_subcpu, MASTER_CLOCK/12);     /* 1.536 MHz */
	m_subcpu->set_addrmap(AS_PROGRAM, &gyruss_state::main_cpu2_map);

	Z80(config, m_audiocpu, SOUND_CLOCK/4);    /* 3.579545 MHz */
	m_audiocpu->set_addrmap(AS_PROGRAM, &gyruss_state::audio_cpu1_map);
	m_audiocpu->set_addrmap(AS_IO, &gyruss_state::audio_cpu1_io_map);

	I8039(config, m_audiocpu_2, XTAL(8'000'000));
	m_audiocpu_2->set_addrmap(AS_PROGRAM, &gyruss_state::audio_cpu2_map);
	m_audiocpu_2->set_addrmap(AS_IO, &gyruss_state::audio_cpu2_io_map);
	m_audiocpu_2->p1_out_cb().set(FUNC(gyruss_state::gyruss_dac_w));
	m_audiocpu_2->p2_out_cb().set(FUNC(gyruss_state::gyruss_irq_clear_w));

	config.m_minimum_quantum = attotime::from_hz(6000);

	ls259_device &mainlatch(LS259(config, "mainlatch")); // 3C
	mainlatch.q_out_cb<0>().set(FUNC(gyruss_state::master_nmi_mask_w));
	mainlatch.q_out_cb<2>().set(FUNC(gyruss_state::coin_counter_1_w));
	mainlatch.q_out_cb<3>().set(FUNC(gyruss_state::coin_counter_2_w));
	mainlatch.q_out_cb<5>().set(FUNC(gyruss_state::flipscreen_w));

	/* video hardware */
	SCREEN(config, m_screen, SCREEN_TYPE_RASTER);
	m_screen->set_raw(PIXEL_CLOCK, HTOTAL, HBEND, HBSTART, VTOTAL, VBEND, VBSTART);
	m_screen->set_screen_update(FUNC(gyruss_state::screen_update_gyruss));
	m_screen->set_palette(m_palette);
	m_screen->screen_vblank().set(FUNC(gyruss_state::vblank_irq));

	GFXDECODE(config, m_gfxdecode, m_palette, gfx_gyruss);
	PALETTE(config, m_palette, FUNC(gyruss_state::gyruss_palette), 16*4+16*16, 32);

	/* sound hardware */
	SPEAKER(config, "lspeaker").front_left();
	SPEAKER(config, "rspeaker").front_right();

	GENERIC_LATCH_8(config, "soundlatch");
	GENERIC_LATCH_8(config, "soundlatch2");

	ay8910_device &ay1(AY8910(config, "ay1", SOUND_CLOCK/8));
	ay1.set_flags(AY8910_DISCRETE_OUTPUT);
	ay1.set_resistors_load(RES_K(3.3), RES_K(3.3), RES_K(3.3));
	ay1.port_b_write_callback().set(FUNC(gyruss_state::gyruss_filter0_w));
	ay1.add_route(0, "discrete", 1.0, 0);
	ay1.add_route(1, "discrete", 1.0, 1);
	ay1.add_route(2, "discrete", 1.0, 2);

	ay8910_device &ay2(AY8910(config, "ay2", SOUND_CLOCK/8));
	ay2.set_flags(AY8910_DISCRETE_OUTPUT);
	ay2.set_resistors_load(RES_K(3.3), RES_K(3.3), RES_K(3.3));
	ay2.port_b_write_callback().set(FUNC(gyruss_state::gyruss_filter1_w));
	ay2.add_route(0, "discrete", 1.0, 3);
	ay2.add_route(1, "discrete", 1.0, 4);
	ay2.add_route(2, "discrete", 1.0, 5);

	ay8910_device &ay3(AY8910(config, "ay3", SOUND_CLOCK/8));
	ay3.set_flags(AY8910_DISCRETE_OUTPUT);
	ay3.set_resistors_load(RES_K(3.3), RES_K(3.3), RES_K(3.3));
	ay3.port_a_read_callback().set(FUNC(gyruss_state::gyruss_portA_r));
	ay3.add_route(0, "discrete", 1.0, 6);
	ay3.add_route(1, "discrete", 1.0, 7);
	ay3.add_route(2, "discrete", 1.0, 8);

	ay8910_device &ay4(AY8910(config, "ay4", SOUND_CLOCK/8));
	ay4.set_flags(AY8910_DISCRETE_OUTPUT);
	ay4.set_resistors_load(RES_K(3.3), RES_K(3.3), RES_K(3.3));
	ay4.add_route(0, "discrete", 1.0, 9);
	ay4.add_route(1, "discrete", 1.0, 10);
	ay4.add_route(2, "discrete", 1.0, 11);

	ay8910_device &ay5(AY8910(config, "ay5", SOUND_CLOCK/8));
	ay5.set_flags(AY8910_DISCRETE_OUTPUT);
	ay5.set_resistors_load(RES_K(3.3), RES_K(3.3), RES_K(3.3));
	ay5.add_route(0, "discrete", 1.0, 12);
	ay5.add_route(1, "discrete", 1.0, 13);
	ay5.add_route(2, "discrete", 1.0, 14);

	DISCRETE(config, m_discrete, gyruss_sound_discrete);
	m_discrete->add_route(0, "rspeaker", 1.0);
	m_discrete->add_route(1, "lspeaker", 1.0);
}
开发者ID:fesh0r，项目名称:mame-full，代码行数:86，代码来源:gyruss.cpp

示例10: RES_K

INPUT_PORTS_END



//**************************************************************************
//  SOUND
//**************************************************************************

//-------------------------------------------------
//  DISCRETE_SOUND( vidbrain )
//-------------------------------------------------

static const discrete_dac_r1_ladder vidbrain_dac =
{
	2,
	{ RES_K(120), RES_K(120) }, // R=56K, 2R=120K
	0, 0, RES_K(120), 0
};

static DISCRETE_SOUND_START( vidbrain )
	DISCRETE_INPUT_DATA(NODE_01)
	DISCRETE_DAC_R1(NODE_02, NODE_01, DEFAULT_TTL_V_LOGIC_1, &vidbrain_dac)
	DISCRETE_OUTPUT(NODE_02, 5000)
DISCRETE_SOUND_END



//**************************************************************************
//  DEVICE CONFIGURATION
//**************************************************************************
开发者ID:Archlogic，项目名称:libretro-mame，代码行数:30，代码来源:vidbrain.c

示例11: GFXDECODE_START

	{ 0, 1, 2, 3 },        /* the bitplanes are packed */
	{ 0*4, 1*4, 2*4, 3*4, 4*4, 5*4, 6*4, 7*4,
			8*4, 9*4, 10*4, 11*4, 12*4, 13*4, 14*4, 15*4 },
	{ 0*4*16, 1*4*16, 2*4*16, 3*4*16, 4*4*16, 5*4*16, 6*4*16, 7*4*16,
			8*4*16, 9*4*16, 10*4*16, 11*4*16, 12*4*16, 13*4*16, 14*4*16, 15*4*16 },
	32*4*8    /* every sprite takes 128 consecutive bytes */
};

static GFXDECODE_START( circusc )
	GFXDECODE_ENTRY( "gfx1", 0, charlayout,       0, 16 )
	GFXDECODE_ENTRY( "gfx2", 0, spritelayout, 16*16, 16 )
GFXDECODE_END

static const discrete_mixer_desc circusc_mixer_desc =
	{DISC_MIXER_IS_RESISTOR,
		{RES_K(2.2), RES_K(2.2), RES_K(10)},
		{0,0,0},	// no variable resistors
		{0,0,0},  // no node capacitors
		0, RES_K(1),
		CAP_U(0.1),
		CAP_U(0.47),
		0, 1};

static DISCRETE_SOUND_START( circusc )

	DISCRETE_INPUTX_STREAM(NODE_01, 0, 1.0, 0)
	DISCRETE_INPUTX_STREAM(NODE_02, 1, 1.0, 0)
	DISCRETE_INPUTX_STREAM(NODE_03, 2, 2.0, 0) // DAC 0..32767, multiply by 2

	DISCRETE_INPUT_DATA(NODE_05)
	DISCRETE_INPUT_DATA(NODE_06)
开发者ID:esn3s，项目名称:mame-rr，代码行数:31，代码来源:circusc.c

示例12: RES_K

	0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8,
	0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x0, 0x0, 0x0, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8,
};


static struct DACinterface n8080_dac_interface =
{
	1, { 30 }
};


struct SN76477interface sheriff_sn76477_interface =
{
	1,
	{ 35 },
	{ RES_K(36)  },  /* 04 */
	{ RES_K(100) },  /* 05 */
	{ CAP_N(1)   },  /* 06 */
	{ RES_K(620) },  /* 07 */
	{ CAP_U(1)   },  /* 08 */
	{ RES_K(20)  },  /* 10 */
	{ RES_K(150) },  /* 11 */
	{ RES_K(47)  },  /* 12 */
	{ 0          },  /* 16 */
	{ CAP_N(1)   },  /* 17 */
	{ RES_M(1.5) },  /* 18 */
	{ 0          },  /* 19 */
	{ RES_M(1.5) },  /* 20 */
	{ CAP_N(47)  },  /* 21 */
	{ CAP_N(47)  },  /* 23 */
	{ RES_K(560) },  /* 24 */
开发者ID:Nebuleon，项目名称:mame4all，代码行数:31，代码来源:n8080.cpp

示例13: PARAM

	PARAM(Solver.DYNAMIC_TS, 1)
	PARAM(Solver.LTE, 1e-1)
	#endif
	//FIXME proper models!
	NET_MODEL(".model 2SC945 NPN(Is=2.04f Xti=3 Eg=1.11 Vaf=6 Bf=400 Ikf=20m Xtb=1.5 Br=3.377 Rc=1 Cjc=1p Mjc=.3333 Vjc=.75 Fc=.5 Cje=25p Mje=.3333 Vje=.75 Tr=450n Tf=20n Itf=0 Vtf=0 Xtf=0 VCEO=45V ICrating=150M MFG=Toshiba)")
	NET_MODEL(".model 1S1588 D(Is=2.52n Rs=.568 N=1.752 Cjo=4p M=.4 tt=20n Iave=200m Vpk=75 mfg=OnSemi type=silicon)")

	//NET_C(R44.1, XU1.7)

	/*
	 * Workaround: The simplified opamp model does not correctly
	 * model the internals of the inputs.
	 */

	ANALOG_INPUT(VWORKAROUND, 2.061)
	RES(RWORKAROUND, RES_K(27))
	NET_C(VWORKAROUND.Q, RWORKAROUND.1)
	NET_C(XU1.6, RWORKAROUND.2)

	ANALOG_INPUT(I_V5, 5)
	//ANALOG_INPUT(I_V0, 0)
	ALIAS(I_V0.Q, GND)
	#if 0
	ANALOG_INPUT(I_SD0, 0)
	ANALOG_INPUT(I_BD0, 0)
	ANALOG_INPUT(I_CH0, 0)
	ANALOG_INPUT(I_OH0, 0)
	ANALOG_INPUT(I_SOUNDIC0, 0)
	ANALOG_INPUT(I_OKI0, 0)
	ANALOG_INPUT(I_SOUND0, 0)
	ANALOG_INPUT(I_SINH0, 0)
开发者ID:DanielAeolusLaude，项目名称:mame，代码行数:31，代码来源:kidniki.c

示例14: RES_K

	0,                  /* Output is not inverted */
	15                  /* Output bit */
};

static const discrete_555_desc starshp1_556_c10 =
{
	DISC_555_OUT_ENERGY,
	5,      /* B+ voltage of 555 */
	DEFAULT_555_VALUES
};

/* effect of 556 internal CV resistors at pin 3 */
static const discrete_mixer_desc starshp1_556_c10_cv =
{
	DISC_MIXER_IS_RESISTOR,
	{STARSHP1_R61, RES_K(5)},
	{0}, {0}, 0, RES_K(10), 0, 0, 0, 1
};

static const discrete_mixer_desc starshp1_566_a9_mix_r =
{
	DISC_MIXER_IS_RESISTOR,
	{STARSHP1_R54, STARSHP1_R55},
	{0}, {0}, 0, 0, 0, 0, 0, 1
};

static const discrete_mixer_desc starshp1_555_b10_mix_r =
{
	DISC_MIXER_IS_RESISTOR,
	{STARSHP1_R65, STARSHP1_R68},
	{0}, {0}, 0, 0, 0, 0, 0, 1
开发者ID:AreaScout，项目名称:mame-libretro，代码行数:31，代码来源:starshp1.c

示例15: RES_K

	{0,0,0,0},  /* no node capacitors */
	0, 0,
	DK_C29,
	0,
	0, 1
};
#endif

static const discrete_mixer_desc dkong_mixer_desc =
{
	DISC_MIXER_IS_RESISTOR,
	{DK_R2, DK_R24, DK_R1, DK_R14},
	{0,0,0},  /* no variable resistors */
	{0,0,0},  /* no node capacitors */
#if DK_REVIEW
	0, RES_K(10),
#else
	0, 0,
#endif
	DK_C159,
	DK_C12,
	0, 1
};

/* There is no load on the output for the jump circuit
 * For the walk circuit, the voltage does not matter */

static const discrete_555_desc dkong_555_vco_desc =
{
	DISC_555_OUT_ENERGY | DISC_555_OUT_DC,
	DK_SUP_V,
开发者ID:MASHinfo，项目名称:mame，代码行数:31，代码来源:dkong.cpp


注：本文中的RES_K函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。