当前位置: 首页>>代码示例>>C++>>正文

C++ RCC_PLLConfig函数代码示例

本文整理汇总了C++中RCC_PLLConfig函数的典型用法代码示例。如果您正苦于以下问题：C++ RCC_PLLConfig函数的具体用法？C++ RCC_PLLConfig怎么用？C++ RCC_PLLConfig使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了RCC_PLLConfig函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: RCC_Configuration

void RCC_Configuration(void)
{
    RCC_DeInit();
    {
        RCC_HCLKConfig(RCC_SYSCLK_Div1);
        RCC_PCLK1Config(RCC_HCLK_Div2);
        RCC_PCLK2Config(RCC_HCLK_Div1);
        RCC_ADCCLKConfig(RCC_PCLK2_Div6);
        FLASH_SetLatency(FLASH_Latency_2);
        FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
        RCC_PLLConfig(RCC_PLLSource_HSI_Div2, RCC_PLLMul_16);
        RCC_PLLCmd(ENABLE);
        while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);
        RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
        while(RCC_GetSYSCLKSource()!=0x08);
    }

    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOB|RCC_APB2Periph_GPIOC, ENABLE);
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE);
    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE);
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE);//72
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);//36
}
开发者ID:alvinyeats，项目名称:Quadrotor-Rebuilding，代码行数:27，代码来源:rcc.c

示例2: RCC_Configuration

void RCC_Configuration(void)
{
	RCC_DeInit ();                        /* RCC system reset(for debug purpose)*/
	RCC_HSEConfig (RCC_HSE_ON);           /* Enable HSE */
	
	/* Wait till HSE is ready */
	while (RCC_GetFlagStatus(RCC_FLAG_HSERDY) == RESET);
	
	RCC_HCLKConfig   (RCC_SYSCLK_Div1);   /* HCLK   = SYSCLK  */
	RCC_PCLK2Config  (RCC_HCLK_Div1);     /* PCLK2  = HCLK    */
	RCC_PCLK1Config  (RCC_HCLK_Div1);     /* PCLK1  = HCLK/2  */
	
	FLASH_SetLatency(FLASH_Latency_2);    /* Flash 2 wait state */
	FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
	
	/* PLLCLK = 8MHz * 9 = 72 MHz */
	RCC_PLLConfig (RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
	
	RCC_PLLCmd (ENABLE);                  /* Enable PLL */
	
	/* Wait till PLL is ready */
	while (RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);
	
	/* Select PLL as system clock source */
	RCC_SYSCLKConfig (RCC_SYSCLKSource_PLLCLK);
	
	/* Wait till PLL is used as system clock source */
	while (RCC_GetSYSCLKSource() != 0x08);
}
开发者ID:bg8wj，项目名称:icar-firmware，代码行数:29，代码来源:init.c

示例3: RCC_Config

// Clocks
void RCC_Config(void) {
    ErrorStatus HSEStartUpStatus;
    // Configuration of SYSCLK, HCLK, PCLK2 + PCLK1
    RCC_DeInit();
    RCC_HSEConfig(RCC_HSE_ON);
    HSEStartUpStatus = RCC_WaitForHSEStartUp();
    if (HSEStartUpStatus == SUCCESS) {
        RCC_HCLKConfig(RCC_SYSCLK_Div1);
        RCC_PCLK2Config(RCC_HCLK_Div1);
        RCC_PCLK1Config(RCC_HCLK_Div2);
        // PLLCLK = 8MHz * 9 = 72 MHz
        RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
        RCC_PLLCmd(ENABLE);
        while (RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) {}
        RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
        while (RCC_GetSYSCLKSource() != 0x08) {}

        /* Enable GPIOA clock */
        RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOC, ENABLE);
    } else {
        // HSE start error - clock configuration will be wrong
        // maybe say about it?
        while (1) {}
    }
}
开发者ID:semicontinuity，项目名称:embedded，代码行数:26，代码来源:main.c

示例4: Set_System

/*******************************************************************************
 * System Clock Configuration
 *******************************************************************************/
void Set_System(void)
{
	RCC_DeInit();
	RCC_HSEConfig(RCC_HSE_ON);
	HSEStartUpStatus = RCC_WaitForHSEStartUp();
	if(HSEStartUpStatus == SUCCESS)
	{
		FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
		FLASH_SetLatency(FLASH_Latency_2);    //Flash 2 wait state
		RCC_HCLKConfig(RCC_SYSCLK_Div1);      //HCLK = SYSCLK
		RCC_PCLK2Config(RCC_HCLK_Div1);       //PCLK2 = HCLK
		RCC_PCLK1Config(RCC_HCLK_Div2);       //PCLK1 = HCLK/2
		RCC_ADCCLKConfig(RCC_PCLK2_Div4);     //ADCCLK = PCLK2/4 = 18MHz
		RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);  //PLLCLK = 72 MHz
		RCC_PLLCmd(ENABLE);
		while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET){}
		RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
		while(RCC_GetSYSCLKSource()!=0x08){}
	}
	RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA, ENABLE);

	RCC_APB2PeriphClockCmd(
	                       RCC_APB2Periph_ADC1  | RCC_APB2Periph_ADC2  | RCC_APB2Periph_GPIOA |
	                       RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD |
	                       RCC_APB2Periph_GPIOE | RCC_APB2Periph_AFIO  | RCC_APB2Periph_TIM1, ENABLE);

	RCC_APB1PeriphClockCmd(
	                       RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3 | RCC_APB1Periph_TIM4 |
	                       RCC_APB1Periph_SPI2, ENABLE);

	RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_1Div5);     //USBCLK = 48MHz
	RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE);  //Enable USB clock

}
开发者ID:thinrope，项目名称:Nano_MCA，代码行数:37，代码来源:HW_V1_Config.c

示例5: RCC_Config

void RCC_Config(void)
//konfigurowanie sygnalow taktujacych
{
  ErrorStatus HSEStartUpStatus;  //zmienna opisujaca rezultat uruchomienia HSE

  RCC_DeInit();	                                         //Reset ustawien RCC
  RCC_HSEConfig(RCC_HSE_ON);                             //Wlaczenie HSE
  HSEStartUpStatus = RCC_WaitForHSEStartUp();		         //Odczekaj az HSE bedzie gotowy
  if(HSEStartUpStatus == SUCCESS)
  {
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);//
    FLASH_SetLatency(FLASH_Latency_2);                   //ustaw zwloke dla pamieci Flash; zaleznie od taktowania rdzenia
	                                                       //0:<24MHz; 1:24~48MHz; 2:>48MHz
    RCC_HCLKConfig(RCC_SYSCLK_Div1);                     //ustaw HCLK=SYSCLK
    RCC_PCLK2Config(RCC_HCLK_Div1);                      //ustaw PCLK2=HCLK
    RCC_PCLK1Config(RCC_HCLK_Div2);                      //ustaw PCLK1=HCLK/2
    RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); //ustaw PLLCLK = HSE*9 czyli 8MHz * 9 = 72 MHz
    RCC_PLLCmd(ENABLE);                                  //wlacz PLL
    while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);  //odczekaj na poprawne uruchomienie PLL
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);           //ustaw PLL jako zrodlo sygnalu zegarowego
    while(RCC_GetSYSCLKSource() != 0x08);                //odczekaj az PLL bedzie sygnalem zegarowym systemu

	/*Tu nalezy umiescic kod zwiazany z konfiguracja sygnalow zegarowych potrzebnych w programie peryferiow*/
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);//wlacz taktowanie portu GPIO A
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);//wlacz taktowanie portu GPIO B
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);//wlacz taktowanie portu GPIO C
  	RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE); //wlacz taktowanie SPI        
    //RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); //wlacz taktowanie funkcji alternatywnych GPIO

  } else {
  } 
}
开发者ID:develorn，项目名称:ARM_function_kamami，代码行数:32，代码来源:main.c

示例6: RCC_Config_HSI_PLL_Max

void RCC_Config_HSI_PLL_Max(void){
RCC_DeInit();
FLASH_SetLatency(FLASH_Latency_2);

/*configurar clock a 64Mhz (max)*/




//divisão do prescaler AHB por 1
RCC_HCLKConfig(RCC_SYSCLK_Div1);
//divisão do prescaler APB1 por 2
RCC_PCLK1Config(RCC_HCLK_Div2);
//divisão do prescaler APB2 por 1
RCC_PCLK2Config(RCC_HCLK_Div1);
//é usado a PLL com a source HSI (clock interno) e 16 de factor multiplicativo
RCC_PLLConfig(RCC_PLLSource_HSI_Div2, RCC_PLLMul_16);

//depois de configurado a PLL fazer enable
RCC_PLLCmd(ENABLE);
while(RCC_GetFlagStatus( RCC_FLAG_PLLRDY)==RESET);

RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
//garantir que o clock da pll está correcto
while(RCC_GetSYSCLKSource()!=0x08);




}
开发者ID:flv1991，项目名称:STM32_LAMEC_CAN，代码行数:30，代码来源:1100419_TIMER_main.c

示例7: RestoreConfiguration

/**
  * @brief  Restore peripheral config before entering STOP mode.
  * @param  None
  * @retval None
  */
static void RestoreConfiguration(void)
{
  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
  
  /* SYSCLK, HCLK, PCLK configuration ----------------------------------------*/    
  /* Enable HSE */    
  RCC_HSEConfig(RCC_HSE_ON);
 
  /* Wait till HSE is ready and if Time out is reached exit */
  HSEStatus = RCC_WaitForHSEStartUp();

  if (HSEStatus == (uint32_t)0x01)
  {
    /* Enable Prefetch Buffer */
    FLASH_SetLatency(FLASH_Latency_1);
    
    /* HCLK = SYSCLK */
    RCC_HCLKConfig(RCC_SYSCLK_Div1); 
    
    /* PCLK = HCLK */
    RCC_PCLKConfig(RCC_HCLK_Div1);
        
    /*  PLL configuration:  = HSE *  6 = 48 MHz */
    RCC_PREDIV1Config(RCC_PREDIV1_Div1);
    RCC_PLLConfig(RCC_PLLSource_PREDIV1, RCC_CFGR_PLLMULL6);
    
    /* Enable PLL */
    RCC_PLLCmd(ENABLE);
    
    /* PLL as system clock source */
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
  } 
}
开发者ID:OomD，项目名称:STM32F0-Discovery，代码行数:38，代码来源:main.c

示例8: sysclockInit

uint8_t sysclockInit(void)
{
    ErrorStatus HSEStartUpStatus;
	
    RCC_DeInit();/* RCC重置 */
    RCC_HSEConfig(RCC_HSE_ON); /*使能HSE*/
    HSEStartUpStatus = RCC_WaitForHSEStartUp();
    if(HSEStartUpStatus == SUCCESS)   //外部晶振使能成功
    {
        RCC_HCLKConfig(RCC_SYSCLK_Div1); /* 配置HCLK = SYSCLK */
        RCC_PCLK2Config(RCC_HCLK_Div1); /* 配置PCLK2 = HCLK */
        RCC_PCLK1Config(RCC_HCLK_Div2); /* 配置PCLK1 = HCLK/2 */

        FLASH_SetLatency(FLASH_Latency_2);
        FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
		
        RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);  /* RCC_PLLSource_HSE_Div1为外置晶振的分频系数;RCC_PLLMul_9为倍频数 */
        RCC_PLLCmd(ENABLE);
        while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET); //等待pll工作
        RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);   /* 选定PLL为系统主时钟 */
        while(RCC_GetSYSCLKSource() != 0x08); //判断pll是否为系统时钟
		return 1;

	}
	else
		return 0;
}
开发者ID:ninfeion，项目名称:BBFLIGHT_FIRMWARE_3.0_KEIL，代码行数:27，代码来源:systeminit.c

示例9: init_HSI_24MHz

void init_HSI_24MHz(void) {
	/* RCC system reset(for debug purpose) */
	RCC_DeInit();
	/* Enable Prefetch Buffer */
	FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
	/* Flash 2 wait state */
	FLASH_SetLatency(FLASH_Latency_2);
	/* HCLK = SYSCLK */
	RCC_HCLKConfig(RCC_SYSCLK_Div1);
	/* PCLK2 = HCLK */
	RCC_PCLK2Config(RCC_HCLK_Div1);
	/* PCLK1 = HCLK/2 */
	RCC_PCLK1Config(RCC_HCLK_Div2);
	/* ADCCLK = PCLK2/6 10.67MHz */
	RCC_ADCCLKConfig(RCC_PCLK2_Div2);
	/* PLLCLK = 4MHz * 6 = 24 MHz */
	RCC_PLLConfig(RCC_PLLSource_HSI_Div2, RCC_PLLMul_6);
	/* Enable PLL */
	RCC_PLLCmd(ENABLE);
	/* Wait till PLL is ready */
	while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);
	/* Select PLL as system clock source */
	RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
	/* Wait till PLL is used as system clock source */
	while(RCC_GetSYSCLKSource() != 0x08);
}
开发者ID:khiewty，项目名称:STM32F10xCx_BreakoutBoard，代码行数:26，代码来源:main.c

示例10: RCC_Configuration

void RCC_Configuration(void)
{   
  
  RCC_DeInit();										// RCC system reset(for debug purpose) 
	RCC_HSEConfig(RCC_HSE_ON);			// Enable HSE 
	HSEStartUpStatus = RCC_WaitForHSEStartUp();		// Wait till HSE is ready 

  if(HSEStartUpStatus == SUCCESS)
  {
		FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); //开启FLASH预读缓冲功能，加速FLASH的读取。所有程序中必须的用法.位置：RCC初始化子函数里面，时钟起振之后
    FLASH_SetLatency(FLASH_Latency_2);                    //flash操作的延时
    
    RCC_HCLKConfig(RCC_SYSCLK_Div1); 			//HCLK = SYSCLK 
		RCC_PCLK2Config(RCC_HCLK_Div1);  			// PCLK2 = HCLK 
		RCC_PCLK1Config(RCC_HCLK_Div2);				// PCLK1 = HCLK/2 
		FLASH_SetLatency(FLASH_Latency_2); 		// Flash 2 wait state 
		FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); 		// Enable Prefetch Buffer 
		RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);			// PLLCLK = 8MHz * 9 = 72 MHz 
		RCC_PLLCmd(ENABLE);			// Enable PLL 

		while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) 				// Wait till PLL is ready 
    {
    }
		RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);								// Select PLL as system clock source 
		while(RCC_GetSYSCLKSource() != 0x08)											// Wait till PLL is used as system clock source 
    {
    }
  } 
	
	
}
开发者ID:moranzcw，项目名称:QuadCopter，代码行数:31，代码来源:rcc_conf.c

示例11: RCC_Configuration

//----------------------------------------------------------------------------
void RCC_Configuration(void)
{
 	unsigned int startDelay;

 	RCC_DeInit();  //-- RCC system reset(for debug purpose)
 	RCC_HSICmd(ENABLE);
 	RCC_HSEConfig(RCC_HSE_OFF);
// 		delay_40ms
 	startDelay = 960000;
 	while (startDelay) startDelay--;
 	
 	//-- Enable Prefetch Buffer
 	FLASH_PrefetchBufferCmd(ENABLE);
 	FLASH_SetLatency(FLASH_Latency_3); //-- Flash 3 wait state for 120MHz
 	
 	//-- PLLCLK = 16MHz/16 * 240/2 = 120 MHz
 	RCC_PLLCmd(DISABLE);
	RCC_HCLKConfig  (RCC_SYSCLK_Div1 ) ;
	RCC_PCLK1Config  ( RCC_HCLK_Div4) ;
	RCC_PCLK2Config  ( RCC_HCLK_Div2) ;
 	RCC_PLLConfig(RCC_PLLSource_HSI, TPLL_M, TPLL_N, TPLL_P, TPLL_Q);
	
// 	

// 	//-- Enable PLL &  wait till PLL is ready
 	RCC_PLLCmd(ENABLE);
 	while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);

// 	startDelay = 240000;
// 	while (startDelay) startDelay--;

// 	//-- Select PLL as system clock source & wait till PLL is used
// 	//-- as system clock source
 	startDelay = 10000;
 	while (startDelay) startDelay--;
 	RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
//	while(RCC_GetSYSCLKSource() != 0x08);
//    
//	RCC_ADCCLKConfig(RCC_PCLK2_Div4);
	startDelay = RCC_GetSYSCLKSource()  ;
	/* DMA clock enable */
	RCC_AHB1PeriphClockCmd(	RCC_AHB1Periph_DMA1	| RCC_AHB1Periph_DMA2 |
							RCC_AHB1Periph_BKPSRAM,
							ENABLE);
   
	/* Enable USART2 clock */
	// uart4 rs-485, uart6 irps
	RCC_APB1PeriphClockCmd(	RCC_APB1Periph_USART3 	| RCC_APB1Periph_UART4	|
   							RCC_APB1Periph_PWR 		| RCC_APB1Periph_TIM2,
							ENABLE);

	/* Enable USART1, GPIOA, GPIOx and AFIO clocks */
	RCC_APB2PeriphClockCmd(	RCC_APB2Periph_ADC1 	| RCC_APB2Periph_ADC2 	|
   							RCC_APB2Periph_USART1 , 	
							ENABLE);
							
	RCC_AHB3PeriphClockCmd  ( RCC_AHB3Periph_FSMC ,  
							ENABLE);

}
开发者ID:ADTL，项目名称:AFGUI，代码行数:61，代码来源:hw_init.c

示例12: RCC_Configuration

/************************************************************************************************
** Function name :			
** Description :配置48M系统时钟
** RCC配置(使用外部8MHz晶振)，6倍频
** Input :
** Output :
** Return :
** Others :
** 
************************************************************************************************/
void RCC_Configuration(void)
{	
	ErrorStatus HSEStartUpStatus;
  	//SystemInit(); 
	/*将外设RCC寄存器重设为缺省值 */   
	RCC_DeInit();
	/*设置外部高速晶振（HSE）*/    
	RCC_HSEConfig(RCC_HSE_ON);   //RCC_HSE_ON——HSE晶振打开(ON)     
	/*等待HSE起振*/    
	HSEStartUpStatus = RCC_WaitForHSEStartUp();     
	if(HSEStartUpStatus == SUCCESS){      //SUCCESS：HSE晶振稳定且就绪 
	/*设置AHB时钟（HCLK）*/       
	RCC_HCLKConfig(RCC_SYSCLK_Div1);  //RCC_SYSCLK_Div1——AHB时钟 = 系统时钟        
	/* 设置高速AHB时钟（PCLK2）*/      
	RCC_PCLK2Config(RCC_HCLK_Div1); //RCC_HCLK_Div1——APB2时钟 = HCLK        
	/*设置低速AHB时钟（PCLK1）*/      
	RCC_PCLK1Config(RCC_HCLK_Div2);   //RCC_HCLK_Div2——APB1时钟 = HCLK /  2       
	/*设置FLASH存储器延时时钟周期数*/      
	FLASH_SetLatency(FLASH_Latency_2);    //FLASH_Latency_2  2延时周期       
	/*选择FLASH预取指缓存的模式*/       
	FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); // 预取指缓存使能       
	/*设置PLL时钟源及倍频系数*/       
	RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_6);  // PLL的输入时钟 = HSE时钟频率；RCC_PLLMul_5——PLL输入时钟x 5         
	/*使能PLL */      
	RCC_PLLCmd(ENABLE);        
	/*检查指定的RCC标志位(PLL准备好标志)设置与否*/        
	while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET){        
	}       
	/*设置系统时钟（SYSCLK） */       
	RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);   //RCC_SYSCLKSource_PLLCLK——选择PLL作为系统时钟       
	/* PLL返回用作系统时钟的时钟源*/      
	while(RCC_GetSYSCLKSource() != 0x08);   //0x08：PLL作为系统时钟         {         }      
	}     
}
开发者ID:FreedomSnail，项目名称:STM32F103_BOOT_USB_AES，代码行数:44，代码来源:bsp.c

示例13: Clk_Init

void Clk_Init (void)
{
  // 1. Cloking the controller from internal HSI RC (8 MHz)
  RCC_HSICmd(ENABLE);
  // wait until the HSI is ready
  while(RCC_GetFlagStatus(RCC_FLAG_HSIRDY) == RESET);
  RCC_SYSCLKConfig(RCC_SYSCLKSource_HSI);
  // 2. Enable ext. high frequency OSC
  RCC_HSEConfig(RCC_HSE_ON);
  // wait until the HSE is ready
  while(RCC_GetFlagStatus(RCC_FLAG_HSERDY) == RESET);
  // 3. Init PLL
  RCC_PLLConfig(RCC_PLLSource_HSE_Div1,RCC_PLLMul_9); // 72MHz
//  RCC_PLLConfig(RCC_PLLSource_HSE_Div2,RCC_PLLMul_9); // 72MHz
  RCC_PLLCmd(ENABLE);
  // wait until the PLL is ready
  while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);
  // 4. Set system clock divders
  RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_1Div5);
  RCC_ADCCLKConfig(RCC_PCLK2_Div8);
  RCC_PCLK2Config(RCC_HCLK_Div1);
  RCC_PCLK1Config(RCC_HCLK_Div2);
  RCC_HCLKConfig(RCC_SYSCLK_Div1);
  // Flash 1 wait state 
  *(vu32 *)0x40022000 = 0x12;
  // 5. Clock system from PLL
  RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
}
开发者ID:chenguangshen，项目名称:MiDebug，代码行数:28，代码来源:main.c

示例14: RestoreConfiguration

/**
  * @brief  Restore peripheral config before entering DEEPSLEEP mode.
  * @param  None
  * @retval None
  */
static void RestoreConfiguration(void)
{
    __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
    
    /* SYSCLK, HCLK, PCLK configuration */
    /* Enable HSE */
    RCC_HSEConfig( RCC_HSE_ON );
    
    /* Wait till HSE is ready and if Time out is reached exit */
    HSEStatus = RCC_WaitForHSEStartUp();
    
    if (HSEStatus == (uint32_t)0x01)
    {
    /* HCLK = SYSCLK */
    RCC_AHBConfig(RCC_SYSCLK_DIV1); 
    
    /* PCLK = HCLK */
    RCC_APB1Config(RCC_APB1AHB_DIV1);
        
    /*  PLL configuration:  = HSE *  6 = 48 MHz */
    RCC_HSEPREDVConfig(RCC_HSEPREDV1_DIV1);
    RCC_PLLConfig(RCC_PLLSOURCE_HSEPREDIV, RCC_GCFGR_PLLMF6);
    
    /* Enable PLL */
    RCC_PLL_Enable(ENABLE);
    
    /* PLL as system clock source */
    RCC_CK_SYSConfig(RCC_SYSCLKSOURCE_PLLCLK);
    } 
}
开发者ID:eeinz，项目名称:trochili，代码行数:35，代码来源:main.c

示例15: RCC_Configuration

/*
********************************************************************************
** 函数名称 ： RCC_Configuration(void)
** 函数功能 ： 时钟初始化
** 输    入	： 无
** 输    出	： 无
** 返    回	： 无
********************************************************************************
*/
void RCC_Configuration(void)
{   
 	RCC_DeInit();

    RCC_HSEConfig(RCC_HSE_ON);
    HSEStartUpStatus = RCC_WaitForHSEStartUp();
    if(HSEStartUpStatus == SUCCESS)
    {
      FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
      FLASH_SetLatency(FLASH_Latency_2);
      RCC_HCLKConfig(RCC_SYSCLK_Div1);
      RCC_PCLK2Config(RCC_HCLK_Div1);
      RCC_PCLK1Config(RCC_HCLK_Div2);
      RCC_PLLConfig(RCC_PLLSource_HSE_Div1,RCC_PLLMul_9);

      RCC_PLLCmd(ENABLE);

      while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY)==RESET)
      {
       }

      RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
      
      while(RCC_GetSYSCLKSource() != 0x08)
      {
       }
      
     }
      
}
开发者ID:fjbali，项目名称:stm32-diy，代码行数:39，代码来源:bsp.c


注：本文中的RCC_PLLConfig函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。