本文整理汇总了C++中QLCRD32函数的典型用法代码示例。如果您正苦于以下问题：C++ QLCRD32函数的具体用法？C++ QLCRD32怎么用？C++ QLCRD32使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了QLCRD32函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: qlcnic_set_wol
static int
qlcnic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 wol_cfg;
if (qlcnic_83xx_check(adapter))
return -EOPNOTSUPP;
if (wol->wolopts & ~WAKE_MAGIC)
return -EINVAL;
wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV);
if (!(wol_cfg & (1 << adapter->portnum)))
return -EOPNOTSUPP;
wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG);
if (wol->wolopts & WAKE_MAGIC)
wol_cfg |= 1UL << adapter->portnum;
else
wol_cfg &= ~(1UL << adapter->portnum);
QLCWR32(adapter, QLCNIC_WOL_CONFIG, wol_cfg);
return 0;
}示例2: qlcnic_get_pauseparam
static void
qlcnic_get_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
int port = adapter->ahw->physical_port;
int err = 0;
__u32 val;
if (qlcnic_83xx_check(adapter)) {
qlcnic_83xx_get_pauseparam(adapter, pause);
return;
}
if (adapter->ahw->port_type == QLCNIC_GBE) {
if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
return;
/* get flow control settings */
val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), &err);
if (err == -EIO)
return;
pause->rx_pause = qlcnic_gb_get_rx_flowctl(val);
val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, &err);
if (err == -EIO)
return;
switch (port) {
case 0:
pause->tx_pause = !(qlcnic_gb_get_gb0_mask(val));
break;
case 1:
pause->tx_pause = !(qlcnic_gb_get_gb1_mask(val));
break;
case 2:
pause->tx_pause = !(qlcnic_gb_get_gb2_mask(val));
break;
case 3:
default:
pause->tx_pause = !(qlcnic_gb_get_gb3_mask(val));
break;
}
} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS))
return;
pause->rx_pause = 1;
val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, &err);
if (err == -EIO)
return;
if (port == 0)
pause->tx_pause = !(qlcnic_xg_get_xg0_mask(val));
else
pause->tx_pause = !(qlcnic_xg_get_xg1_mask(val));
} else {
dev_err(&netdev->dev, "Unknown board type: %x\n",
adapter->ahw->port_type);
}
}示例3: qlcnic_get_drvinfo
static void
qlcnic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 fw_major, fw_minor, fw_build;
fw_major = QLCRD32(adapter, QLCNIC_FW_VERSION_MAJOR);
fw_minor = QLCRD32(adapter, QLCNIC_FW_VERSION_MINOR);
fw_build = QLCRD32(adapter, QLCNIC_FW_VERSION_SUB);
sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);
strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
strlcpy(drvinfo->driver, qlcnic_driver_name, 32);
strlcpy(drvinfo->version, QLCNIC_LINUX_VERSIONID, 32);
}示例4: qlcnic_get_wol
static void
qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 wol_cfg;
wol->supported = 0;
wol->wolopts = 0;
wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV);
if (wol_cfg & (1UL << adapter->portnum))
wol->supported |= WAKE_MAGIC;
wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG);
if (wol_cfg & (1UL << adapter->portnum))
wol->wolopts |= WAKE_MAGIC;
}示例5: qlcnic_test_link
static u32 qlcnic_test_link(struct net_device *dev)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 val;
val = QLCRD32(adapter, CRB_XG_STATE_P3P);
val = XG_LINK_STATE_P3P(adapter->ahw.pci_func, val);
return (val == XG_LINK_UP_P3P) ? 0 : 1;
}示例6: qlcnic_reg_test
static int qlcnic_reg_test(struct net_device *dev)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 data_read;
data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0));
if ((data_read & 0xffff) != adapter->pdev->vendor)
return 1;
return 0;
}示例7: qlcnic_82xx_get_registers
static int qlcnic_82xx_get_registers(struct qlcnic_adapter *adapter,
u32 *regs_buff)
{
int i, j = 0;
for (i = QLCNIC_DEV_INFO_SIZE + 1; diag_registers[j] != -1; j++, i++)
regs_buff[i] = QLC_SHARED_REG_RD32(adapter, diag_registers[j]);
j = 0;
while (ext_diag_registers[j] != -1)
regs_buff[i++] = QLCRD32(adapter, ext_diag_registers[j++]);
return i;
}示例8: qlcnic_get_wol
static void
qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 wol_cfg;
int err = 0;
if (qlcnic_83xx_check(adapter))
return;
wol->supported = 0;
wol->wolopts = 0;
wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV, &err);
if (err == -EIO)
return;
if (wol_cfg & (1UL << adapter->portnum))
wol->supported |= WAKE_MAGIC;
wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG, &err);
if (wol_cfg & (1UL << adapter->portnum))
wol->wolopts |= WAKE_MAGIC;
}示例9: qlcnic_test_link
static u32 qlcnic_test_link(struct net_device *dev)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 val;
if (qlcnic_83xx_check(adapter)) {
val = qlcnic_83xx_test_link(adapter);
return (val & 1) ? 0 : 1;
}
val = QLCRD32(adapter, CRB_XG_STATE_P3P);
val = XG_LINK_STATE_P3P(adapter->ahw->pci_func, val);
return (val == XG_LINK_UP_P3P) ? 0 : 1;
}示例10: qlcnic_get_eswitch_capabilities
/* Get eSwitch Capabilities */
int qlcnic_get_eswitch_capabilities(struct qlcnic_adapter *adapter, u8 port,
struct qlcnic_eswitch *eswitch)
{
int err = -EIO;
u32 arg1, arg2;
if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC)
return err;
err = qlcnic_issue_cmd(adapter,
adapter->ahw.pci_func,
adapter->fw_hal_version,
port,
0,
0,
QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY);
if (err == QLCNIC_RCODE_SUCCESS) {
arg1 = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
arg2 = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);
eswitch->port = arg1 & 0xf;
eswitch->active_vports = LSB(arg2);
eswitch->max_ucast_filters = MSB(arg2);
eswitch->max_active_vlans = LSB(MSW(arg2));
if (arg1 & BIT_6)
eswitch->flags |= QLCNIC_SWITCH_VLAN_FILTERING;
if (arg1 & BIT_7)
eswitch->flags |= QLCNIC_SWITCH_PROMISC_MODE;
if (arg1 & BIT_8)
eswitch->flags |= QLCNIC_SWITCH_PORT_MIRRORING;
} else {
dev_err(&adapter->pdev->dev,
"Failed to get eswitch capabilities%d\n", err);
}
return err;
}示例11: qlcnic_reg_test
static int qlcnic_reg_test(struct net_device *dev)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 data_read;
int err = 0;
if (qlcnic_83xx_check(adapter))
return qlcnic_83xx_reg_test(adapter);
data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0), &err);
if (err == -EIO)
return err;
if ((data_read & 0xffff) != adapter->pdev->vendor)
return 1;
return 0;
}示例12: qlcnic_fw_cmd_query_phy
int
qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val)
{
if (qlcnic_issue_cmd(adapter,
adapter->ahw.pci_func,
adapter->fw_hal_version,
reg,
0,
0,
QLCNIC_CDRP_CMD_READ_PHY)) {
return -EIO;
}
return QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
}示例13: qlcnic_poll_rsp
static u32
qlcnic_poll_rsp(struct qlcnic_adapter *adapter)
{
u32 rsp;
int timeout = 0;
do {
/* give atleast 1ms for firmware to respond */
msleep(1);
if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT)
return QLCNIC_CDRP_RSP_TIMEOUT;
rsp = QLCRD32(adapter, QLCNIC_CDRP_CRB_OFFSET);
} while (!QLCNIC_CDRP_IS_RSP(rsp));
return rsp;
}示例14: qlcnic_get_regs
static void
qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
struct qlcnic_host_sds_ring *sds_ring;
u32 *regs_buff = p;
int ring, i = 0, j = 0;
memset(p, 0, qlcnic_get_regs_len(dev));
regs->version = (QLCNIC_ETHTOOL_REGS_VER << 24) |
(adapter->ahw.revision_id << 16) | (adapter->pdev)->device;
regs_buff[0] = (0xcafe0000 | (QLCNIC_DEV_INFO_SIZE & 0xffff));
regs_buff[1] = QLCNIC_MGMT_API_VERSION;
for (i = QLCNIC_DEV_INFO_SIZE + 1; diag_registers[j] != -1; j++, i++)
regs_buff[i] = QLCRD32(adapter, diag_registers[j]);
if (!test_bit(__QLCNIC_DEV_UP, &adapter->state))
return;
regs_buff[i++] = 0xFFEFCDAB; /* Marker btw regs and ring count*/
regs_buff[i++] = 1; /* No. of tx ring */
regs_buff[i++] = le32_to_cpu(*(adapter->tx_ring->hw_consumer));
regs_buff[i++] = readl(adapter->tx_ring->crb_cmd_producer);
regs_buff[i++] = 2; /* No. of rx ring */
regs_buff[i++] = readl(recv_ctx->rds_rings[0].crb_rcv_producer);
regs_buff[i++] = readl(recv_ctx->rds_rings[1].crb_rcv_producer);
regs_buff[i++] = adapter->max_sds_rings;
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
sds_ring = &(recv_ctx->sds_rings[ring]);
regs_buff[i++] = readl(sds_ring->crb_sts_consumer);
}
}示例15: qlcnic_issue_cmd
u32
qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd)
{
u32 rsp;
u32 signature;
u32 rcode = QLCNIC_RCODE_SUCCESS;
struct pci_dev *pdev = adapter->pdev;
signature = QLCNIC_CDRP_SIGNATURE_MAKE(pci_fn, version);
/* Acquire semaphore before accessing CRB */
if (qlcnic_api_lock(adapter))
return QLCNIC_RCODE_TIMEOUT;
QLCWR32(adapter, QLCNIC_SIGN_CRB_OFFSET, signature);
QLCWR32(adapter, QLCNIC_ARG1_CRB_OFFSET, arg1);
QLCWR32(adapter, QLCNIC_ARG2_CRB_OFFSET, arg2);
QLCWR32(adapter, QLCNIC_ARG3_CRB_OFFSET, arg3);
QLCWR32(adapter, QLCNIC_CDRP_CRB_OFFSET, QLCNIC_CDRP_FORM_CMD(cmd));
rsp = qlcnic_poll_rsp(adapter);
if (rsp == QLCNIC_CDRP_RSP_TIMEOUT) {
dev_err(&pdev->dev, "card response timeout.\n");
rcode = QLCNIC_RCODE_TIMEOUT;
} else if (rsp == QLCNIC_CDRP_RSP_FAIL) {
rcode = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
dev_err(&pdev->dev, "failed card response code:0x%x\n",
rcode);
}
/* Release semaphore */
qlcnic_api_unlock(adapter);
return rcode;
}