C++ Pipe_IsINReceived函数代码示例

/** Task to manage an enumerated USB Bluetooth adapter once connected, to display movement data as it is received. */
void BluetoothAdapter_USBTask(void)
{
	if ((USB_HostState != HOST_STATE_Configured) || !(BluetoothAdapter_IsActive))
	  return;

	Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE);
	Pipe_Unfreeze();
	
	if (Pipe_IsINReceived())
	{
		BT_HCIData_Header_t* PacketHeader = (BT_HCIData_Header_t*)BluetoothAdapter_Stack.Config.PacketBuffer;

		/* Read in the HCI Data packet data from the Data IN pipe */
		Pipe_Read_Stream_LE(PacketHeader, sizeof(BT_HCIData_Header_t), NULL);
		Pipe_Read_Stream_LE(PacketHeader->Data, PacketHeader->DataLength, NULL);
		Pipe_ClearIN();
		Pipe_Freeze();

//		RGB_SetColour(RGB_ALIAS_Busy);
		Bluetooth_ProcessPacket(&BluetoothAdapter_Stack, BLUETOOTH_PACKET_HCIData);
//		RGB_SetColour(RGB_ALIAS_Connected);
	}
	
	Pipe_Freeze();
	
	Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE);
	Pipe_Unfreeze();
	
	if (Pipe_IsINReceived())
	{
		BT_HCIEvent_Header_t* EventHeader = (BT_HCIEvent_Header_t*)BluetoothAdapter_Stack.Config.PacketBuffer;

		/* Read in the HCI Event packet data from the Event IN pipe */
		Pipe_Read_Stream_LE(EventHeader, sizeof(BT_HCIEvent_Header_t), NULL);
		Pipe_Read_Stream_LE(EventHeader->Parameters, EventHeader->ParameterLength, NULL);
		Pipe_ClearIN();
		Pipe_Freeze();

		//RGB_SetColour(RGB_ALIAS_Busy);
		Bluetooth_ProcessPacket(&BluetoothAdapter_Stack, BLUETOOTH_PACKET_HCIEvent);
		//RGB_SetColour(RGB_ALIAS_Connected);
	}
	
	Pipe_Freeze();
	
	/* Keep on running the management routine until all pending packets have been sent */
	while (Bluetooth_ManageConnections(&BluetoothAdapter_Stack)){};	
	//while (Bluetooth_ManageConnections(&BluetoothAdapter_Stack))
	  //RGB_SetColour(RGB_ALIAS_Busy);

}

/** Task to read in data received from the attached CDC device and print it to the serial port.
 */
void CDCHost_Task(void)
{
	if (USB_HostState != HOST_STATE_Configured)
	  return;

	/* Select the data IN pipe */
	Pipe_SelectPipe(CDC_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (Pipe_IsINReceived())
	{
		/* Re-freeze IN pipe after the packet has been received */
		Pipe_Freeze();

		/* Check if data is in the pipe */
		if (Pipe_IsReadWriteAllowed())
		{
			/* Get the length of the pipe data, and create a new buffer to hold it */
			uint16_t BufferLength = Pipe_BytesInPipe();
			uint8_t  Buffer[BufferLength];

			/* Read in the pipe data to the temporary buffer */
			Pipe_Read_Stream_LE(Buffer, BufferLength, NULL);

			/* Print out the buffer contents to the USART */
			for (uint16_t BufferByte = 0; BufferByte < BufferLength; BufferByte++)
			  putchar(Buffer[BufferByte]);
		}

		/* Clear the pipe after it is read, ready for the next packet */
		Pipe_ClearIN();
	}

	/* Re-freeze IN pipe after use */
	Pipe_Freeze();

	/* Select and unfreeze the notification pipe */
	Pipe_SelectPipe(CDC_NOTIFICATION_PIPE);
	Pipe_Unfreeze();

	/* Check if a packet has been received */
	if (Pipe_IsINReceived())
	{
		/* Discard the unused event notification */
		Pipe_ClearIN();
	}

	/* Freeze notification IN pipe after use */
	Pipe_Freeze();
}

/** Task to read and process the HID report descriptor and HID reports from the device and display the
 *  results onto the board LEDs.
 */
void MouseHost_Task(void)
{
	if (USB_HostState != HOST_STATE_Configured)
	  return;

	/* Select and unfreeze mouse data pipe */
	Pipe_SelectPipe(MOUSE_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (Pipe_IsINReceived())
	{
		/* Check if data has been received from the attached mouse */
		if (Pipe_IsReadWriteAllowed())
		{
			/* Create buffer big enough for the report */
			uint8_t MouseReport[Pipe_BytesInPipe()];

			/* Load in the mouse report */
			Pipe_Read_Stream_LE(MouseReport, Pipe_BytesInPipe(), NULL);

			/* Process the read in mouse report from the device */
			ProcessMouseReport(MouseReport);
		}

		/* Clear the IN endpoint, ready for next data packet */
		Pipe_ClearIN();
	}

	/* Freeze mouse data pipe */
	Pipe_Freeze();
}

uint8_t Pipe_WaitUntilReady(void)
{
	#if (USB_STREAM_TIMEOUT_MS < 0xFF)
	uint8_t  TimeoutMSRem = USB_STREAM_TIMEOUT_MS;	
	#else
	uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
	#endif
	
	for (;;)
	{
		if (Pipe_GetPipeToken() == PIPE_TOKEN_IN)
		{
			if (Pipe_IsINReceived())
			  return PIPE_READYWAIT_NoError;
		}
		else
		{
			if (Pipe_IsOUTReady())
			  return PIPE_READYWAIT_NoError;		
		}

		if (Pipe_IsStalled())
		  return PIPE_READYWAIT_PipeStalled;
		else if (USB_HostState == HOST_STATE_Unattached)
		  return PIPE_READYWAIT_DeviceDisconnected;
			  
		if (USB_INT_HasOccurred(USB_INT_HSOFI))
		{
			USB_INT_Clear(USB_INT_HSOFI);

			if (!(TimeoutMSRem--))
			  return PIPE_READYWAIT_Timeout;
		}
	}
}

bool MIDI_Host_ReceiveEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo,
                                  MIDI_EventPacket_t* const Event)
{
	if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive))
	  return HOST_SENDCONTROL_DeviceDisconnected;

	bool DataReady = false;

	Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataINPipe.Address);
	Pipe_Unfreeze();

	if (Pipe_IsINReceived())
	{
		if (Pipe_BytesInPipe())
		{
			Pipe_Read_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL);
			DataReady = true;
		}

		if (!(Pipe_BytesInPipe()))
		  Pipe_ClearIN();
	}

	Pipe_Freeze();

	return DataReady;
}

void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
{
	if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
	  return;
	
	Pipe_SelectPipe(CDCInterfaceInfo->Config.NotificationPipeNumber);
	Pipe_SetPipeToken(PIPE_TOKEN_IN);
	Pipe_Unfreeze();

	if (Pipe_IsINReceived())
	{
		USB_Request_Header_t Notification;
		Pipe_Read_Stream_LE(&Notification, sizeof(USB_Request_Header_t), NO_STREAM_CALLBACK);
		
		if ((Notification.bRequest      == NOTIF_SerialState) &&
		    (Notification.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)))
		{
			Pipe_Read_Stream_LE(&CDCInterfaceInfo->State.ControlLineStates.DeviceToHost,
			                    sizeof(CDCInterfaceInfo->State.ControlLineStates.DeviceToHost),
			                    NO_STREAM_CALLBACK);
			
		}

		Pipe_ClearIN();

		EVENT_CDC_Host_ControLineStateChanged(CDCInterfaceInfo);
	}
	
	Pipe_Freeze();
}

/** Reads in and processes the next report from the attached device, displaying the report
 *  contents on the board LEDs and via the serial port.
 */
void ReadNextReport(void)
{
	USB_MouseReport_Data_t MouseReport;
	uint8_t                LEDMask = LEDS_NO_LEDS;

	/* Select mouse data pipe */
	Pipe_SelectPipe(MOUSE_DATA_IN_PIPE);

	/* Unfreeze keyboard data pipe */
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (!(Pipe_IsINReceived()))
	{
		/* No packet received (no movement), turn off LEDs */
		LEDs_SetAllLEDs(LEDS_NO_LEDS);

		/* Refreeze HID data IN pipe */
		Pipe_Freeze();

		return;
	}

	/* Ensure pipe contains data before trying to read from it */
	if (Pipe_IsReadWriteAllowed())
	{
		/* Read in mouse report data */
		Pipe_Read_Stream_LE(&MouseReport, sizeof(MouseReport));

		/* Alter status LEDs according to mouse X movement */
		if (MouseReport.X > 0)
		  LEDMask |= LEDS_LED1;
		else if (MouseReport.X < 0)
		  LEDMask |= LEDS_LED2;

		/* Alter status LEDs according to mouse Y movement */
		if (MouseReport.Y > 0)
		  LEDMask |= LEDS_LED3;
		else if (MouseReport.Y < 0)
		  LEDMask |= LEDS_LED4;

		/* Alter status LEDs according to mouse button position */
		if (MouseReport.Button)
		  LEDMask  = LEDS_ALL_LEDS;

		LEDs_SetAllLEDs(LEDMask);

		/* Print mouse report data through the serial port */
		printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,
													  MouseReport.Y,
													  MouseReport.Button);
	}

	/* Clear the IN endpoint, ready for next data packet */
	Pipe_ClearIN();

	/* Refreeze mouse data pipe */
	Pipe_Freeze();
}

/** Reads in and processes the next report from the attached device, displaying the report
 *  contents on the board LEDs and via the serial port.
 */
void ReadNextReport(void)
{
	USB_KeyboardReport_Data_t KeyboardReport;
		
	/* Select keyboard data pipe */
	Pipe_SelectPipe(KEYBOARD_DATAPIPE);	

	/* Unfreeze keyboard data pipe */
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (!(Pipe_IsINReceived()))
	{
		/* Refreeze HID data IN pipe */
		Pipe_Freeze();
			
		return;
	}
	
	/* Ensure pipe contains data before trying to read from it */
	if (Pipe_IsReadWriteAllowed())
	{
		/* Read in keyboard report data */
		Pipe_Read_Stream_LE(&KeyboardReport, sizeof(KeyboardReport));

		/* Indicate if the modifier byte is non-zero (special key such as shift is being pressed) */
		LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0);
		
		/* Check if a key has been pressed */
		if (KeyboardReport.KeyCode)
		{
			/* Toggle status LED to indicate keypress */
			LEDs_ToggleLEDs(LEDS_LED2);
				  
			char PressedKey = 0;

			/* Retrieve pressed key character if alphanumeric */
			if ((KeyboardReport.KeyCode[0] >= 0x04) && (KeyboardReport.KeyCode[0] <= 0x1D))
			  PressedKey = (KeyboardReport.KeyCode[0] - 0x04) + 'A';
			else if ((KeyboardReport.KeyCode[0] >= 0x1E) && (KeyboardReport.KeyCode[0] <= 0x27))
			  PressedKey = (KeyboardReport.KeyCode[0] - 0x1E) + '0';
			else if (KeyboardReport.KeyCode[0] == 0x2C)
			  PressedKey = ' ';						
			else if (KeyboardReport.KeyCode[0] == 0x28)
			  PressedKey = '\n';
				 
			/* Print the pressed key character out through the serial port if valid */
			if (PressedKey)
			  putchar(PressedKey);
		}
	}
		
	/* Clear the IN endpoint, ready for next data packet */
	Pipe_ClearIN();

	/* Refreeze keyboard data pipe */
	Pipe_Freeze();
}

/** Waits until the attached device is ready to accept data following a CBW, checking
 *  to ensure that the device has not stalled the transaction.
 *
 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
 */
static uint8_t MassStore_WaitForDataReceived(void)
{
	uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;

	/* Unfreeze the OUT pipe so that it can be checked */
	Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
	Pipe_Unfreeze();

	/* Select the IN data pipe for data reception */
	Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Wait until data received in the IN pipe */
	while (!(Pipe_IsINReceived()))
	{
		/* Check to see if a new frame has been issued (1ms elapsed) */
		if (USB_INT_HasOccurred(USB_INT_HSOFI))
		{
			/* Clear the flag and decrement the timeout period counter */
			USB_INT_Clear(USB_INT_HSOFI);
			TimeoutMSRem--;

			/* Check to see if the timeout period for the command has elapsed */
			if (!(TimeoutMSRem))
			  return PIPE_RWSTREAM_Timeout;
		}
	
		Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);

		/* Check if pipe stalled (command failed by device) */
		if (Pipe_IsStalled())
		{
			/* Clear the stall condition on the OUT pipe */
			MassStore_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);

			return PIPE_RWSTREAM_PipeStalled;
		}

		Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);

		/* Check if pipe stalled (command failed by device) */
		if (Pipe_IsStalled())
		{
			/* Clear the stall condition on the IN pipe */
			MassStore_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);

			return PIPE_RWSTREAM_PipeStalled;
		}
		  
		/* Check to see if the device was disconnected, if so exit function */
		if (!(USB_IsConnected))
		  return PIPE_RWSTREAM_DeviceDisconnected;
	};

	return PIPE_RWSTREAM_NoError;
}

static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo)
{
	uint16_t TimeoutMSRem        = MS_COMMAND_DATA_TIMEOUT_MS;
	uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();

	Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber);
	Pipe_Unfreeze();

	while (!(Pipe_IsINReceived()))
	{
		uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();

		if (CurrentFrameNumber != PreviousFrameNumber)
		{
			PreviousFrameNumber = CurrentFrameNumber;

			if (!(TimeoutMSRem--))
			  return PIPE_RWSTREAM_Timeout;
		}

		Pipe_Freeze();
		Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber);
		Pipe_Unfreeze();

		if (Pipe_IsStalled())
		{
			USB_Host_ClearPipeStall(MSInterfaceInfo->Config.DataOUTPipeNumber);

			return PIPE_RWSTREAM_PipeStalled;
		}

		Pipe_Freeze();
		Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber);
		Pipe_Unfreeze();

		if (Pipe_IsStalled())
		{
			USB_Host_ClearPipeStall(MSInterfaceInfo->Config.DataINPipeNumber);

			return PIPE_RWSTREAM_PipeStalled;
		}

		if (USB_HostState == HOST_STATE_Unattached)
		  return PIPE_RWSTREAM_DeviceDisconnected;
	};

	Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber);
	Pipe_Freeze();

	Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber);
	Pipe_Freeze();

	return PIPE_RWSTREAM_NoError;
}

bool SI_Host_IsEventReceived(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo)
{
	bool IsEventReceived = false;

	if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
	  return false;

	Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipe.Address);
	Pipe_Unfreeze();

	if (Pipe_IsINReceived())
	  IsEventReceived = true;

	Pipe_Freeze();

	return IsEventReceived;
}

/** Task to set the configuration of the attached device after it has been enumerated. */
void AndroidHost_Task(void)
{
    if (USB_HostState != HOST_STATE_Configured)
        return;

    /* Select the data IN pipe */
    Pipe_SelectPipe(ANDROID_DATA_IN_PIPE);
    Pipe_Unfreeze();

    /* Check to see if a packet has been received */
    if (Pipe_IsINReceived())
    {
        /* Re-freeze IN pipe after the packet has been received */
        Pipe_Freeze();

        /* Check if data is in the pipe */
        if (Pipe_IsReadWriteAllowed())
        {
            uint8_t NextReceivedByte = Pipe_Read_8();
            uint8_t LEDMask          = LEDS_NO_LEDS;

            if (NextReceivedByte & 0x01)
                LEDMask |= LEDS_LED1;

            if (NextReceivedByte & 0x02)
                LEDMask |= LEDS_LED2;

            if (NextReceivedByte & 0x04)
                LEDMask |= LEDS_LED3;

            if (NextReceivedByte & 0x08)
                LEDMask |= LEDS_LED4;

            LEDs_SetAllLEDs(LEDMask);
        }
        else
        {
            /* Clear the pipe after all data in the packet has been read, ready for the next packet */
            Pipe_ClearIN();
        }
    }

    /* Re-freeze IN pipe after use */
    Pipe_Freeze();
}

/** Reads in and discards the next report from the attached device. */
void DiscardNextReport(void)
{
	/* Select and unfreeze HID data IN pipe */
	Pipe_SelectPipe(HID_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (!(Pipe_IsINReceived()))
	{
		/* Refreeze HID data IN pipe */
		Pipe_Freeze();
			
		return;
	}
		
	/* Clear the IN endpoint, ready for next data packet */
	Pipe_ClearIN();
	
	/* Refreeze HID data IN pipe */
	Pipe_Freeze();
}

void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
{
	uint8_t portnum = CDCInterfaceInfo->Config.PortNumber;

	if ((USB_HostState[portnum] != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
	  return;

	Pipe_SelectPipe(portnum,CDCInterfaceInfo->Config.NotificationPipeNumber);
	Pipe_Unfreeze();

	if (Pipe_IsINReceived(portnum))
	{
		USB_Request_Header_t Notification;
		Pipe_Read_Stream_LE(portnum,&Notification, sizeof(USB_Request_Header_t), NULL);

		if ((Notification.bRequest      == CDC_NOTIF_SerialState) &&
		    (Notification.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)))
		{
			Pipe_Read_Stream_LE(portnum,
								&CDCInterfaceInfo->State.ControlLineStates.DeviceToHost,
			                    sizeof(CDCInterfaceInfo->State.ControlLineStates.DeviceToHost),
			                    NULL);

			Pipe_ClearIN(portnum);

			EVENT_CDC_Host_ControLineStateChanged(CDCInterfaceInfo);
		}
		else
		{
			Pipe_ClearIN(portnum);
		}
	}

	Pipe_Freeze();

	#if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
	CDC_Host_Flush(CDCInterfaceInfo);
	#endif
}

uint8_t Pipe_WaitUntilReady(void)
{
	#if (USB_STREAM_TIMEOUT_MS < 0xFF)
	uint8_t  TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
	#else
	uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
	#endif

	uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();

	for (;;)
	{
		if (Pipe_GetPipeToken() == PIPE_TOKEN_IN)
		{
			if (Pipe_IsINReceived())
			  return PIPE_READYWAIT_NoError;
		}
		else
		{
			if (Pipe_IsOUTReady())
			  return PIPE_READYWAIT_NoError;
		}

		if (Pipe_IsStalled())
		  return PIPE_READYWAIT_PipeStalled;
		else if (USB_HostState == HOST_STATE_Unattached)
		  return PIPE_READYWAIT_DeviceDisconnected;

		uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();

		if (CurrentFrameNumber != PreviousFrameNumber)
		{
			PreviousFrameNumber = CurrentFrameNumber;

			if (!(TimeoutMSRem--))
			  return PIPE_READYWAIT_Timeout;
		}
	}
}