本文整理汇总了C++中Pa_StopStream函数的典型用法代码示例。如果您正苦于以下问题：C++ Pa_StopStream函数的具体用法？C++ Pa_StopStream怎么用？C++ Pa_StopStream使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了Pa_StopStream函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: TestRecording
PaError TestRecording( paTestData *dataPtr )
{
PaError err;
int i;
int lastIndex = 0;
/* Open input stream if not already open. */
if( dataPtr->inputStream == NULL )
{
/* Record some audio. */
err = Pa_OpenStream(
&dataPtr->inputStream,
Pa_GetDefaultInputDeviceID(),
dataPtr->samplesPerFrame, /* stereo input */
PA_SAMPLE_TYPE,
NULL,
paNoDevice,
0,
PA_SAMPLE_TYPE,
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER, /* frames per buffer */
NUM_REC_BUFS, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
recordCallback,
dataPtr );
if( err != paNoError ) goto error;
}
dataPtr->frameIndex = 0;
err = Pa_StartStream( dataPtr->inputStream );
if( err != paNoError ) goto error;
printf("Now recording!\n"); fflush(stdout);
for( i=0; i<(NUM_SECONDS*1000/SLEEP_DUR_MSEC); i++ )
{
int frameIndex, delta;
Pa_Sleep(SLEEP_DUR_MSEC);
frameIndex = dataPtr->frameIndex;
if( Pa_StreamActive( dataPtr->inputStream ) <= 0)
{
printf("Stream inactive!\n");
break;
}
if( dataPtr->maxFrameIndex <= frameIndex )
{
printf("Buffer recording complete.\n");
break;
}
delta = frameIndex - lastIndex;
lastIndex = frameIndex;
printf("index = %d, delta = %d\n", frameIndex, delta ); fflush(stdout);
}
err = Pa_StopStream( dataPtr->inputStream );
if( err != paNoError ) goto error;
printf("Done.\n"); fflush(stdout);
error:
return err;
}示例2: TestStopMode
int TestStopMode( paTestData *data )
{
PortAudioStream *stream;
PaError err;
data->done = 0;
data->phase = 0.0;
data->frameCounter = 0;
data->noteCounter = 0;
data->repeatCounter = 0;
data->phase_increment = data->tune[data->noteCounter];
err = Pa_Initialize();
if( err != paNoError ) goto error;
err = Pa_OpenStream(
&stream,
paNoDevice,/* default input device */
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
OUTPUT_DEVICE,
2, /* stereo output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER, /* frames per buffer */
NUM_BUFFERS, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
if( data->stopMode == MODE_FINISH )
{
while( Pa_StreamActive( stream ) )
{
/*printf("outTime = %g, note# = %d, repeat# = %d\n", data->outTime,
data->noteCounter, data->repeatCounter );
fflush(stdout); /**/
Pa_Sleep( SLEEP_DUR );
}
}
else
{
while( data->repeatCounter < MAX_REPEATS )
{
/*printf("outTime = %g, note# = %d, repeat# = %d\n", data->outTime,
data->noteCounter, data->repeatCounter );
fflush(stdout); /**/
Pa_Sleep( SLEEP_DUR );
}
}
if( data->stopMode == MODE_ABORT )
{
printf("Call Pa_AbortStream()\n");
err = Pa_AbortStream( stream );
}
else
{
printf("Call Pa_StopStream()\n");
err = Pa_StopStream( stream );
}
if( err != paNoError ) goto error;
printf("Call Pa_CloseStream()\n"); fflush(stdout);
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}示例3: main
//.........这里部分代码省略.........
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Establishing load conditions...\n" );
/* Determine number of sines required to get to 50% */
do
{
Pa_Sleep( 100 );
load = Pa_GetStreamCpuLoad( stream );
printf("sineCount = %d, CPU load = %f\n", data.sineCount, load );
if( load < 0.3 )
{
data.sineCount += 10;
}
else if( load < 0.4 )
{
data.sineCount += 2;
}
else
{
data.sineCount += 1;
}
}
while( load < 0.5 && data.sineCount < (MAX_SINES-1));
safeSineCount = data.sineCount;
/* Calculate target stress value then ramp up to that level*/
stressedSineCount = (int) (2.0 * data.sineCount * MAX_LOAD );
if( stressedSineCount > MAX_SINES )
stressedSineCount = MAX_SINES;
for( ; data.sineCount < stressedSineCount; data.sineCount+=4 )
{
Pa_Sleep( 100 );
load = Pa_GetStreamCpuLoad( stream );
printf("STRESSING: sineCount = %d, CPU load = %f\n", data.sineCount, load );
}
printf("Counting underflows for 5 seconds.\n");
data.countUnderflows = 1;
Pa_Sleep( 5000 );
stressedUnderflowCount = data.outputUnderflowCount;
data.countUnderflows = 0;
data.sineCount = safeSineCount;
printf("Resuming safe load...\n");
Pa_Sleep( 1500 );
data.outputUnderflowCount = 0;
Pa_Sleep( 1500 );
load = Pa_GetStreamCpuLoad( stream );
printf("sineCount = %d, CPU load = %f\n", data.sineCount, load );
printf("Counting underflows for 5 seconds.\n");
data.countUnderflows = 1;
Pa_Sleep( 5000 );
safeUnderflowCount = data.outputUnderflowCount;
printf("Stop stream.\n");
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
if( stressedUnderflowCount == 0 )
printf("Test failed, no output underflows detected under stress.\n");
else if( safeUnderflowCount != 0 )
printf("Test failed, %d unexpected underflows detected under safe load.\n", safeUnderflowCount);
else
printf("Test passed, %d expected output underflows detected under stress, 0 unexpected underflows detected under safe load.\n", stressedUnderflowCount );
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}示例4: main
int main(void)
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
TestData data;
int i, j;
printf( "PortAudio Test: output sine wave. SR = %d, BufSize = %d\n",
SAMPLE_RATE, FRAMES_PER_BUFFER );
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
err = Pa_Initialize();
if( err != paNoError ) goto error;
outputParameters.device = Pa_GetDefaultOutputDevice();
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* output will be in-range, so no need to clip */
TestCallback,
&data );
if( err != paNoError ) goto error;
printf("Repeating test %d times.\n", NUM_LOOPS );
for( i=0; i < NUM_LOOPS; ++i )
{
data.phase = 0;
data.generatedFramesCount = 0;
data.callbackReturnedPaComplete = 0;
data.callbackInvokedAfterReturningPaComplete = 0;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play for %d seconds.\n", NUM_SECONDS );
/* wait for the callback to complete generating NUM_SECONDS of tone */
do
{
Pa_Sleep( 500 );
}
while( !data.callbackReturnedPaComplete );
printf( "Callback returned paComplete.\n" );
printf( "Waiting for buffers to finish playing...\n" );
/* wait for stream to become inactive,
or for a timeout of approximately NUM_SECONDS
*/
j = 0;
while( (err = Pa_IsStreamActive( stream )) == 1 && j < NUM_SECONDS * 2 )
{
printf(".\n" );
Pa_Sleep( 500 );
++j;
}
if( err < 0 )
{
goto error;
}
else if( err == 1 )
{
printf( "TEST FAILED: Timed out waiting for buffers to finish playing.\n" );
}
else
{
printf("Buffers finished.\n" );
}
if( data.callbackInvokedAfterReturningPaComplete )
{
printf( "TEST FAILED: Callback was invoked after returning paComplete.\n" );
}
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
}
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
//.........这里部分代码省略.........
示例5: Pa_OpenStream
// thread execution starts here
void *AudioThread::Entry()
{
PaError err;
err = Pa_OpenStream(
&mPortStream,
paNoDevice,/* default input device */
0, /* no input */
paInt16, /* 32 bit floating point input */
NULL,
Pa_GetDefaultOutputDeviceID(), /* default output device */
2, /* stereo output */
paInt16, /* 32 bit floating point output */
NULL,
mRate,
2,
0, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
AudioThread::CallbackWrapper,
this );
if( err != paNoError )
{
WriteText(wxT("There was a PortAudio Error on start\n"));
Pa_CloseStream( mPortStream );
return NULL;
}
while(true)
{
if ( TestDestroy() )
{
WriteText("Audio Thread Destroyed\n");
break;
}
if (mStatus == doPlay)
{
PaError err;
err = Pa_StartStream( mPortStream );
if( err != paNoError )
{
WriteText(wxT("There was a PortAudio Error on start\n"));
break;
}
else
mStatus = Playing;
}
if (mStatus == doPause)
{
PaError err;
err = Pa_StopStream( mPortStream );
if( err != paNoError )
{
WriteText(wxT("There was a PortAudio Error on stop\n"));
break;
}
else
mStatus = Paused;
}
wxThread::Sleep(500);
}
Pa_AbortStream( mPortStream );
Pa_CloseStream( mPortStream );
return NULL;
}示例6: free_portaudio
void free_portaudio(PaStream *audio_stream)
{
Pa_StopStream(audio_stream);
Pa_Terminate();
}示例7: main
int main( int argc, char **argv )
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
paTestData data;
int go;
int outLatency = 0;
int minLatency = DEFAULT_BUFFER_SIZE * 2;
int framesPerBuffer;
double sampleRate = 44100.0;
char str[256];
printf("pa_minlat - Determine minimum latency for your computer.\n");
printf(" usage: pa_minlat {userBufferSize}\n");
printf(" for example: pa_minlat 64\n");
printf("Adjust your stereo until you hear a smooth tone in each speaker.\n");
printf("Then try to find the smallest number of frames that still sounds smooth.\n");
printf("Note that the sound will stop momentarily when you change the number of buffers.\n");
/* Get bufferSize from command line. */
framesPerBuffer = ( argc > 1 ) ? atol( argv[1] ) : DEFAULT_BUFFER_SIZE;
printf("Frames per buffer = %d\n", framesPerBuffer );
data.left_phase = data.right_phase = 0.0;
err = Pa_Initialize();
if( err != paNoError ) goto error;
outLatency = sampleRate * 200.0 / 1000.0; /* 200 msec. */
/* Try different numBuffers in a loop. */
go = 1;
while( go )
{
outputParameters.device = Pa_GetDefaultOutputDevice(); /* Default output device. */
outputParameters.channelCount = 2; /* Stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output. */
outputParameters.suggestedLatency = (double)outLatency / sampleRate; /* In seconds. */
outputParameters.hostApiSpecificStreamInfo = NULL;
printf("Latency = %d frames = %6.1f msec.\n", outLatency, outputParameters.suggestedLatency * 1000.0 );
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
sampleRate,
framesPerBuffer,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
paminlatCallback,
&data );
if( err != paNoError ) goto error;
if( stream == NULL ) goto error;
/* Start audio. */
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
/* Ask user for a new nlatency. */
printf("\nMove windows around to see if the sound glitches.\n");
printf("Latency now %d, enter new number of frames, or 'q' to quit: ", outLatency );
gets( str );
if( str[0] == 'q' ) go = 0;
else
{
outLatency = atol( str );
if( outLatency < minLatency )
{
printf( "Latency below minimum of %d! Set to minimum!!!\n", minLatency );
outLatency = minLatency;
}
}
/* Stop sound until ENTER hit. */
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
}
printf("A good setting for latency would be somewhat higher than\n");
printf("the minimum latency that worked.\n");
printf("PortAudio: Test finished.\n");
Pa_Terminate();
return 0;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return 1;
}示例8: Main
//.........这里部分代码省略.........
glTexParameteri(GL_TEXTURE_2D_ARRAY, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
glTexParameteri(GL_TEXTURE_2D_ARRAY, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
unsigned char* textureTmp = new unsigned char[waterfallSize * b.getWidth()];
glTexImage2D( GL_TEXTURE_2D_ARRAY, 0, GL_R8, b.getWidth(), waterfallSize, 0, GL_RED, GL_UNSIGNED_BYTE, textureTmp);
delete textureTmp;
float max = 0;
for (unsigned int i = 0; i < k.mB; ++i) {
drawArray[2 * i + 0] = (float)i / k.mB * 2.0f - 1.0f;
float tmp = std::abs(out[i]);
drawArray[2 * i + 1] = tmp;
max = std::max(tmp, max);
}
font = new Font(512, "res/font/DroidSans.woff", 32, tm);
print = new Print(font);
//print.set(&font, "res/shader/fontVertex.c", "res/shader/fontFragment.c");
print->setScreenSize(screen);
glm::vec2* vert = new glm::vec2[1024];
glm::vec2* debug = new glm::vec2[b.getWidth()];
for (unsigned int i = 0; i < b.getWidth(); ++i) {
debug[i].x = (float)i / b.getWidth() * 2.0f - 1.0f;
}
uint32_t vao;
glGenVertexArrays(1, &vao);
glBindVertexArray(vao);
uint32_t vbo[2];
glGenBuffers(1, vbo);
glBindBuffer(GL_ARRAY_BUFFER, vbo[0]);
glEnableVertexAttribArray(0);
glBufferData(GL_ARRAY_BUFFER, k.mB * sizeof(glm::vec2), drawArray, GL_DYNAMIC_DRAW);
glVertexAttribPointer(0, 2, GL_FLOAT, GL_FALSE, 0, 0);
glClearColor(0.0f, 0.0f, 0.0f, 0.0f);
glEnable(GL_BLEND);
glfwSetWindowUserPointer(window, this);
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
double time, timeo;
glfwSwapInterval(1);
PaStream* stream;
PaStreamParameters params;
params.device = 21;
params.channelCount = 1;
params.sampleFormat = paFloat32;
params.hostApiSpecificStreamInfo = nullptr;
params.suggestedLatency = 0.5;
err = Pa_OpenStream(&stream, ¶ms, nullptr, sampleRate, paFramesPerBufferUnspecified, 0, paCallback, this);
if (err != paNoError)
printf("error %i", err);
Pa_StartStream(stream);
while(!glfwWindowShouldClose(window))
{
timeo = time;
time = glfwGetTime();
CQT::transform(mAudioData, out, b, mAudioLength);
max = 0.0f;
for (unsigned int i = 0; i < k.mB; ++i) {
drawArray[2 * i + 0] = (float)i / k.mB * 2.0f - 1.0f;
float tmp = std::abs(out[i]);
drawArray[2 * i + 1] = tmp;
max = std::max(tmp, max);
}
for (unsigned int i = 0; i < k.mB; ++i) {
drawArray[2 * i + 1] = std::log(drawArray[2 * i +1]) * mScale + mOffset;
}
//printf("%f\n", drawArray[1]);
glBindVertexArray(vao);
glBindBuffer(GL_ARRAY_BUFFER, vbo[0]);
glBufferData(GL_ARRAY_BUFFER, k.mB * sizeof(glm::vec2), drawArray, GL_DYNAMIC_DRAW);
p->use();
glDrawArrays(GL_LINE_STRIP, 0, k.mB);
for (unsigned int i = 0; i < b.getWidth(); ++i) {
debug[i].y = mAudioData[i] / 15.0;
}
glBufferData(GL_ARRAY_BUFFER, b.getWidth() * sizeof(glm::vec2), debug, GL_DYNAMIC_DRAW);
glDrawArrays(GL_LINE_STRIP, 0, b.getWidth());
print->printfAt(-300.0f, 100.0f, 16.0f, 16.0f, u8"Fps:%03.3f", 1/(time-timeo));
glfwSwapBuffers(window);
glClear(GL_COLOR_BUFFER_BIT);
glfwPollEvents();
}
Pa_StopStream(stream);
Pa_CloseStream(stream);
Pa_Terminate();
std::cout << "Hello World. I'm Peach." << std::endl;
}示例9: main
int main(int argc, char* argv[])
{
PaStreamParameters outputParameters;
PaWinMmeStreamInfo wmmeStreamInfo;
PaStream *stream;
PaError err;
paTestData data;
int deviceIndex;
FILE *fp;
const char *fileName = "c:\\test_48k.ac3.spdif";
data.buffer = NULL;
printf("usage: patest_wmme_ac3 fileName [paDeviceIndex]\n");
printf("**IMPORTANT*** The provided file must include the spdif preamble at the start of every AC-3 frame. Using a normal ac3 file won't work.\n");
printf("PortAudio Test: output a raw spdif ac3 stream. SR = %d, BufSize = %d, Chans = %d\n",
SAMPLE_RATE, FRAMES_PER_BUFFER, CHANNEL_COUNT);
if( argc >= 2 )
fileName = argv[1];
printf( "reading spdif ac3 raw stream file %s\n", fileName );
fp = fopen( fileName, "rb" );
if( !fp ){
fprintf( stderr, "error opening spdif ac3 file.\n" );
return -1;
}
/* get file size */
fseek( fp, 0, SEEK_END );
data.bufferSampleCount = ftell( fp ) / sizeof(short);
fseek( fp, 0, SEEK_SET );
/* allocate buffer, read the whole file into memory */
data.buffer = (short*)malloc( data.bufferSampleCount * sizeof(short) );
if( !data.buffer ){
fprintf( stderr, "error allocating buffer.\n" );
return -1;
}
fread( data.buffer, sizeof(short), data.bufferSampleCount, fp );
fclose( fp );
data.playbackIndex = 0;
err = Pa_Initialize();
if( err != paNoError ) goto error;
deviceIndex = Pa_GetHostApiInfo( Pa_HostApiTypeIdToHostApiIndex( paMME ) )->defaultOutputDevice;
if( argc >= 3 ){
sscanf( argv[1], "%d", &deviceIndex );
}
printf( "using device id %d (%s)\n", deviceIndex, Pa_GetDeviceInfo(deviceIndex)->name );
outputParameters.device = deviceIndex;
outputParameters.channelCount = CHANNEL_COUNT;
outputParameters.sampleFormat = paInt16; /* IMPORTANT must use paInt16 for WMME AC3 */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
wmmeStreamInfo.size = sizeof(PaWinMmeStreamInfo);
wmmeStreamInfo.hostApiType = paMME;
wmmeStreamInfo.version = 1;
wmmeStreamInfo.flags = paWinMmeWaveFormatDolbyAc3Spdif;
outputParameters.hostApiSpecificStreamInfo = &wmmeStreamInfo;
if( Pa_IsFormatSupported( 0, &outputParameters, SAMPLE_RATE ) == paFormatIsSupported ){
printf( "Pa_IsFormatSupported reports device will support %d channels.\n", CHANNEL_COUNT );
}else{
printf( "Pa_IsFormatSupported reports device will not support %d channels.\n", CHANNEL_COUNT );
}
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
0,
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play for %d seconds.\n", NUM_SECONDS );
Pa_Sleep( NUM_SECONDS * 1000 );
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
free( data.buffer );
//.........这里部分代码省略.........
示例10: pa_phone_setup
static PaCtx *
pa_phone_setup(void) {
PaCtx *ctx;
int err, i, srcerr;
PaError err2;
err = paNoError;
err2 = 0;
if ((ctx = calloc(1, sizeof(PaCtx))) == NULL) {
WHY("Unable to allocate PA context");
err2 = 1;
goto error;
}
/* Init mutex */
if (pthread_mutex_init(&ctx->mtx, NULL) != 0) {
WHYF("Unable to init mutex: %s\n", strerror(errno));
err2 = 1;
goto error;
}
/* Allocate FIFOs */
i = IN_FRAMES * 10 * sizeof(int16_t);
printf("Allocating %d byte FIFOs\n", i);
if ((ctx->incoming = fifo_alloc(i)) == NULL) {
WHY("Unable to allocate incoming FIFO\n");
err2 = 1;
goto error;
}
if ((ctx->incrate = fifo_alloc(i)) == NULL) {
WHY("Unable to allocate incoming SRC FIFO\n");
err2 = 1;
goto error;
}
if ((ctx->outgoing = fifo_alloc(i)) == NULL) {
WHY("Unable to allocate outgoing FIFO\n");
err2 = 1;
goto error;
}
/* Init sample rate converter */
if ((ctx->src = src_new(SRC_SINC_BEST_QUALITY, 1, &srcerr)) == NULL) {
WHYF("Unable to init sample rate converter: %d\n", srcerr);
err2 = 1;
goto error;
}
/* Init echo canceller */
if ((ctx->echocan = echo_can_init(ECHO_LEN, ADAPT_MODE)) == NULL) {
WHY("Unable to init echo canceller\n");
err2 = 1;
goto error;
}
/* Init codec2 */
if ((ctx->codec2 = codec2_create()) == NULL) {
WHY("Unable to init codec2\n");
err2 = 1;
goto error;
}
/* Initialize Port Audio library */
if ((err = Pa_Initialize()) != paNoError)
goto error;
/* Open an audio I/O stream. */
if ((err = Pa_OpenDefaultStream(&ctx->stream,
1, /* input channels */
1, /* output channels */
paInt16,
SAMPLE_RATE,
IN_FRAMES, /* frames per buffer */
patestCallback,
&ctx)) != paNoError)
goto error;
/* Start stream */
if ((err = Pa_StartStream(ctx->stream)) != paNoError)
goto error;
/* Close down stream, PA, etc */
/* XXX: hangs in pthread_join on Ubuntu 10.04 */
#ifndef linux
if ((err = Pa_StopStream(ctx->stream)) != paNoError)
goto error;
#endif
/* Do stuff */
if ((err = Pa_CloseStream(ctx->stream)) != paNoError)
goto error;
error:
Pa_Terminate();
//.........这里部分代码省略.........
示例11: main
int main(void)
{
int i;
PaStream* stream;
PaStreamParameters outputParameters;
PaError err;
paTestData data = {0};
double load;
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.sine[TABLE_SIZE] = data.sine[0]; /* set guard point */
err = Pa_Initialize();
if( err != paNoError )
goto error;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* Default output device. */
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto error;
}
outputParameters.channelCount = 2; /* Stereo output. */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output. */
outputParameters.hostApiSpecificStreamInfo = NULL;
outputParameters.suggestedLatency = Pa_GetDeviceInfo(outputParameters.device)
->defaultHighOutputLatency;
err = Pa_OpenStream(&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* No out of range samples should occur. */
patestCallback,
&data);
if( err != paNoError )
goto error;
err = Pa_StartStream( stream );
if( err != paNoError )
goto error;
/* Play an increasing number of sine waves until we hit MAX_USAGE */
do {
data.numSines++;
Pa_Sleep(200);
load = Pa_GetStreamCpuLoad(stream);
printf("numSines = %d, CPU load = %f\n", data.numSines, load );
fflush(stdout);
} while((load < MAX_USAGE) && (data.numSines < MAX_SINES));
Pa_Sleep(2000); /* Stay for 2 seconds around 80% CPU. */
err = Pa_StopStream( stream );
if( err != paNoError )
goto error;
err = Pa_CloseStream( stream );
if( err != paNoError )
goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}示例12: main
//.........这里部分代码省略.........
err = Pa_Initialize();
if( err != paNoError ) goto error;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto error;
}
outputParameters.channelCount = 1; /* mono output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
sprintf( data.message, "No Message" );
err = Pa_SetStreamFinishedCallback( stream, &StreamFinished );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
/* set up unbuffered reading */
struct termios tio;
tcgetattr(1,&tio);
tio.c_lflag &=(~ICANON & ~ECHO);
tcsetattr(1,TCSANOW,&tio);
int pressed = -1;
while(1) {
switch (getc(stdin)) {
case 'C':
pressed = 0;
break;
case 'd':
pressed = 1;
break;
case 'D':
pressed = 2;
break;
case 'e':
pressed = 3;
break;
case 'E':
pressed = 4;
break;
case 'F':
pressed = 5;
break;
case 'g':
pressed = 6;
break;
case 'G':
pressed = 7;
break;
case 'a':
pressed = 8;
break;
case 'A':
pressed = 9;
break;
case 'b':
pressed = 10;
break;
case 'B':
pressed = 11;
break;
}
if (pressed != -1) {
data.states[pressed] = ATTACK;
}
}
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}示例13: main
int main(void)
{
PortAudioStream *stream;
PaError err;
paTestData data;
int i;
PaDeviceID inputDevice;
const PaDeviceInfo *pdi;
printf("PortAudio Test: input signal from each channel. %d buffers\n", NUM_BUFFERS );
data.liveChannel = 0;
err = Pa_Initialize();
if( err != paNoError ) goto error;
#ifdef INPUT_DEVICE_NAME
printf("Try to use device: %s\n", INPUT_DEVICE_NAME );
inputDevice = PaFindDeviceByName(INPUT_DEVICE_NAME);
if( inputDevice == paNoDevice )
{
printf("Could not find %s. Using default instead.\n", INPUT_DEVICE_NAME );
inputDevice = Pa_GetDefaultInputDeviceID();
}
#else
printf("Using default input device.\n");
inputDevice = Pa_GetDefaultInputDeviceID();
#endif
pdi = Pa_GetDeviceInfo( inputDevice );
if( pdi == NULL )
{
printf("Could not get device info!\n");
goto error;
}
data.numChannels = pdi->maxInputChannels;
printf("Input Device name is %s\n", pdi->name );
printf("Input Device has %d channels.\n", pdi->maxInputChannels);
err = Pa_OpenStream(
&stream,
inputDevice,
pdi->maxInputChannels,
paFloat32, /* 32 bit floating point input */
NULL,
OUTPUT_DEVICE,
2,
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER, /* frames per buffer */
NUM_BUFFERS, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
data.liveChannel = 0;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
for( i=0; i<data.numChannels; i++ )
{
data.liveChannel = i;
printf("Channel %d being sent to output. Hit ENTER for next channel.", i );
fflush(stdout);
getchar();
}
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}示例14: main
int main(void)
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
paTestData data;
const PaDeviceInfo *device;
PaWasapiDeviceRole role;
int i;
PaWasapiStreamInfo ws_info = { 0 };
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.left_phase = data.right_phase = 0;
err = Pa_Initialize();
if( err != paNoError ) goto error;
for (i = 0; i < Pa_GetDeviceCount(); ++i)
{
device = Pa_GetDeviceInfo(i);
if (Pa_GetDeviceInfo(i)->maxInputChannels != 0)
continue;
if (Pa_GetDeviceInfo(i)->hostApi != Pa_HostApiTypeIdToHostApiIndex(paWASAPI))
continue;
role = PaWasapi_GetDeviceRole(i);
if (role == eRoleSpeakers)
break;
}
if (role != eRoleSpeakers)
{
fprintf(stderr,"Error: No WASAPI Speakers.\n");
return -1;
}
outputParameters.device = i;//Pa_GetDefaultOutputDevice(); /* default output device */
ws_info.size = sizeof(ws_info);
ws_info.hostApiType = paWASAPI;
ws_info.version = 1;
ws_info.flags = paWinWasapiExclusive;
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto error;
}
outputParameters.channelCount = 2;
outputParameters.sampleFormat = paInt16;
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultHighOutputLatency;
outputParameters.hostApiSpecificStreamInfo = &ws_info;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
paFramesPerBufferUnspecified/*FRAMES_PER_BUFFER*/,
paClipOff|paPrimeOutputBuffersUsingStreamCallback, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
sprintf( data.message, "No Message" );
err = Pa_SetStreamFinishedCallback( stream, &StreamFinished );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play for %d seconds.\n", NUM_SECONDS );
Pa_Sleep( NUM_SECONDS * 1000 );
//while (1) { Pa_Sleep(2); }
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}示例15: main
int main(void)
{
PortAudioStream *stream;
PaError err;
paTestData DATA;
int i;
int totalSamps;
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
DATA.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
DATA.left_phase = DATA.right_phase = 0;
DATA.framesToGo = totalSamps = NUM_SECONDS * SAMPLE_RATE; /* Play for a few seconds. */
err = Pa_Initialize();
if( err != paNoError ) goto error;
err = Pa_OpenStream(
&stream,
paNoDevice,/* default input device */
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
Pa_GetDefaultOutputDeviceID(), /* default output device */
2, /* stereo output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER, /* frames per buffer */
NUM_BUFFERS, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&DATA );
if( err != paNoError ) goto error;
DATA.outTime = -1.0; // mark time for callback as undefined
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
/* Watch until sound is halfway finished. */
printf("Play for %d seconds.\n", NUM_SECONDS/2 ); fflush(stdout);
do
{
ReportStreamTime( stream, &DATA );
Pa_Sleep(100);
} while( Pa_StreamTime( stream ) < (totalSamps/2) );
/* Stop sound until ENTER hit. */
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
printf("Pause for 2 seconds.\n"); fflush(stdout);
Pa_Sleep( 2000 );
DATA.outTime = -1.0; // mark time for callback as undefined
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play until sound is finished.\n"); fflush(stdout);
do
{
ReportStreamTime( stream, &DATA );
Pa_Sleep(100);
} while( Pa_StreamActive( stream ) );
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}