当前位置: 首页>>代码示例>>C++>>正文

C++ PLAY_NOTE_ARRAY函数代码示例

本文整理汇总了C++中PLAY_NOTE_ARRAY函数的典型用法代码示例。如果您正苦于以下问题：C++ PLAY_NOTE_ARRAY函数的具体用法？C++ PLAY_NOTE_ARRAY怎么用？C++ PLAY_NOTE_ARRAY使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了PLAY_NOTE_ARRAY函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
        #endif
        persistant_default_layer_set(1UL<<_QWERTY);
      }
      return false;
      break;
    case COLEMAK:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
        #endif
        persistant_default_layer_set(1UL<<_COLEMAK);
      }
      return false;
      break;
    case DVORAK:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
        #endif
        persistant_default_layer_set(1UL<<_DVORAK);
      }
      return false;
      break;
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case ADJUST:
      if (record->event.pressed) {
        layer_on(_ADJUST);
      } else {
        layer_off(_ADJUST);
      }
      return false;
      break;
  }
  return true;
}
开发者ID:IBNobody，项目名称:qmk_firmware，代码行数:60，代码来源:keymap.c

示例2: switch

const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
      switch(id) {
        case _QWERTY:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
            #endif
            persistant_default_layer_set(1UL<<_QWERTY);
          }
          break;
        case _COLEMAK:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_colemak, false, 0);
            #endif
            persistant_default_layer_set(1UL<<_COLEMAK);
          }
          break;
        case _DVORAK:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
            #endif
            persistant_default_layer_set(1UL<<_DVORAK);
          }
          break;
        case _LOWER:
          if (record->event.pressed) {
            layer_on(_LOWER);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          } else {
            layer_off(_LOWER);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          }
          break;
        case _RAISE:
          if (record->event.pressed) {
            layer_on(_RAISE);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          } else {
            layer_off(_RAISE);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          }
          break;
        case M_BL:
          if (record->event.pressed) {
            register_code(KC_RSFT);
            #ifdef BACKLIGHT_ENABLE
              backlight_step();
            #endif
          } else {
            unregister_code(KC_RSFT);
          }
        break;
      }
    return MACRO_NONE;
};
开发者ID:BeatVids，项目名称:qmk_firmware，代码行数:58，代码来源:keymap.c

示例3: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
        case QWERTY:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
            #endif
            persistant_default_layer_set(1UL<<_QWERTY);
          }
          return false;
          break;
        case LOWER:
          if (record->event.pressed) {
            layer_on(_LOWER);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          } else {
            layer_off(_LOWER);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          }
          return false;
          break;
        case RAISE:
          if (record->event.pressed) {
            layer_on(_RAISE);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          } else {
            layer_off(_RAISE);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          }
          return false;
          break;
        case MOD:
          if (record->event.pressed) {
            layer_on(_MOD);
            PLAY_NOTE_ARRAY(tone_MOD, false, 0);
          } else {
            layer_off(_MOD);
            PLAY_NOTE_ARRAY(tone_MOD_exit, false, 0);
          }
          return false;
          break;
        case BACKLIT:
          if (record->event.pressed) {
            register_code(KC_RSFT);
            #ifdef BACKLIGHT_ENABLE
              backlight_step();
            #endif
          } else {
            unregister_code(KC_RSFT);
          }
          return false;
          break;
      }
    return true;
};
开发者ID:heidarj，项目名称:preonic，代码行数:55，代码来源:keymap.c

示例4: action_function

void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
	if (record->event.pressed) {
		switch (id) {
			case 0:
				PLAY_NOTE_ARRAY(tone_startup, false, 0);
				break;
			case 1:
				PLAY_NOTE_ARRAY(music_scale, false, 0);
				break;
			case 2:
				PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
				break;
		}
	}
};
开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:15，代码来源:keymap.c

示例5: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
        persistant_default_layer_set(1UL<<_QWERTY);
      }
      return false;
      break;
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_LOWER);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
      break;
  }
  return true;
}
开发者ID:baetheus，项目名称:qmk_firmware，代码行数:32，代码来源:keymap.c

示例6: shutdown_user

void shutdown_user(void) {
    #ifdef AUDIO_ENABLE
        PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
	_delay_ms(150);
	stop_all_notes();
    #endif
}
开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:7，代码来源:rev1.c

示例7: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
	switch (keycode) {
		case QWERTY:
			if (record->event.pressed) {
				if (IS_LAYER_ON(_DVORAK)) {
#ifdef AUDIO_ENABLE
					PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
#endif
					layer_off(_DVORAK);
				}
			}
			return false;
			break;
		case DVORAK:
			if (record->event.pressed) {
				if (!IS_LAYER_ON(_DVORAK)) {
#ifdef AUDIO_ENABLE
					PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
#endif
					layer_on(_DVORAK);
				}
			}
			return false;
			break;
		case NUMBER:
			if (record->event.pressed) {
				layer_on(_NUMBER);
				update_tri_layer(_NUMBER, _ACTION, _FUNCTN);
			} else {
				layer_off(_NUMBER);
				update_tri_layer(_NUMBER, _ACTION, _FUNCTN);
			}
			return false;
			break;
		case ACTION:
			if (record->event.pressed) {
				layer_on(_ACTION);
				update_tri_layer(_NUMBER, _ACTION, _FUNCTN);
			} else {
				layer_off(_ACTION);
				update_tri_layer(_NUMBER, _ACTION, _FUNCTN);
			}
			return false;
			break;
	}
	return true;
}
开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:47，代码来源:keymap.c

示例8: startup_user

void startup_user()
{
    #ifdef RGB_MATRIX_ENABLE
    rgblight_mode(RGB_MATRIX_CYCLE_ALL);
    #endif //RGB_matrix
    wait_ms(20); // gets rid of tick
    PLAY_NOTE_ARRAY(tone_startup, false, 0);
}
开发者ID:0xdec，项目名称:qmk_firmware，代码行数:8，代码来源:keymap.c

示例9: matrix_init_kb

void matrix_init_kb(void) {

    #ifdef AUDIO_ENABLE
        _delay_ms(20); // gets rid of tick
        PLAY_NOTE_ARRAY(tone_startup, false, 0);
    #endif

    // // green led on
    // DDRD |= (1<<5);
    // PORTD &= ~(1<<5);

    // // orange led on
    // DDRB |= (1<<0);
    // PORTB &= ~(1<<0);

	matrix_init_user();
};
开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:17，代码来源:rev1.c

示例10: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
        #endif
        persistant_default_layer_set(1UL<<_QWERTY);
      }
      return false;
      break;
    case NPAD:
      if (record->event.pressed) {
        layer_on(_NUMPAD);
      } else {
        layer_off(_NUMPAD);
      }
      return false;
      break;
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
      } else {
        layer_off(_LOWER);
      }
      return false;
      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
      } else {
        layer_off(_RAISE);
      }
      return false;
      break;
    case MOVE:
      if (record->event.pressed) {
        layer_on(_MOVE);
      } else {
        layer_off(_MOVE);
      }
      return false;
      break;
  }
  return true;
}
开发者ID:unusedPhD，项目名称:qmk_firmware，代码行数:46，代码来源:keymap.c

示例11: process_record_user

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        #ifdef AUDIO_ENABLE
          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
        #endif
        persistant_default_layer_set(1UL<<_QWERTY);
      }
      return false;
      break;
    //case COLEMAK:
      //if (record->event.pressed) {
        //#ifdef AUDIO_ENABLE
          //PLAY_NOTE_ARRAY(tone_colemak, false, 0);
        //#endif
        //persistant_default_layer_set(1UL<<_COLEMAK);
      //}
      //return false;
      //break;
  }
  return true;
}
开发者ID:Talljoe，项目名称:qmk_firmware，代码行数:23，代码来源:keymap.c

示例12: led_set_user

void led_set_user(uint8_t usb_led)
{
  static uint8_t old_usb_led = 0;

  _delay_ms(10); // gets rid of tick

  if (!is_playing_notes())
  {
    if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK)))
    {
      // If CAPS LK LED is turning on...
      PLAY_NOTE_ARRAY(tone_caps_on,  false, LEGATO);
    }
    else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK)))
    {
      // If CAPS LK LED is turning off...
      PLAY_NOTE_ARRAY(tone_caps_off, false, LEGATO);
    }
    else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK)))
    {
      // If NUM LK LED is turning on...
      PLAY_NOTE_ARRAY(tone_numlk_on,  false, LEGATO);
    }
    else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK)))
    {
      // If NUM LED is turning off...
      PLAY_NOTE_ARRAY(tone_numlk_off, false, LEGATO);
    }
    else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
    {
      // If SCROLL LK LED is turning on...
      PLAY_NOTE_ARRAY(tone_scroll_on,  false, LEGATO);
    }
    else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
    {
      // If SCROLL LED is turning off...
      PLAY_NOTE_ARRAY(tone_scroll_off, false, LEGATO);
    }
  }

  old_usb_led = usb_led;
}
开发者ID:IBNobody，项目名称:qmk_firmware，代码行数:42，代码来源:keymap.c

示例13: startup_user

void startup_user()
{
    _delay_ms(20); // gets rid of tick
    PLAY_NOTE_ARRAY(tone_startup, false, 0);
}
开发者ID:2k0ri，项目名称:qmk_firmware，代码行数:5，代码来源:keymap.c

示例14: play_goodbye_tone

 void play_goodbye_tone(void)
 {
   PLAY_NOTE_ARRAY(goodbye, false, 0);
   _delay_ms(150);
 }
开发者ID:CognitiveBurden，项目名称:qmk_firmware，代码行数:5，代码来源:keymap.c

示例15: switch

const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
      switch(id) {
        case _QWERTY:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
            #endif
            persistant_default_layer_set(1UL<<_QWERTY);
          }
          break;
        case _COLEMAK:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_colemak, false, 0);
            #endif
            persistant_default_layer_set(1UL<<_COLEMAK);
          }
          break;
        case _DVORAK:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
            #endif
            persistant_default_layer_set(1UL<<_DVORAK);
          }
          break;
        case _LOWER:
          if (record->event.pressed) {
            layer_on(_LOWER);
            #ifdef BACKLIGHT_ENABLE
                breathing_speed_set(2);
                breathing_pulse();
            #endif
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          } else {
            layer_off(_LOWER);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          }
          break;
        case _RAISE:
          if (record->event.pressed) {
            layer_on(_RAISE);
            #ifdef BACKLIGHT_ENABLE
                breathing_speed_set(2);
                breathing_pulse();
            #endif
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          } else {
            layer_off(_RAISE);
            update_tri_layer(_LOWER, _RAISE, _ADJUST);
          }
          break;
        case M_BL:
          if (record->event.pressed) {
            register_code(KC_RSFT);
            #ifdef BACKLIGHT_ENABLE
              backlight_step();
            #endif
          } else {
            unregister_code(KC_RSFT);
          }
        break;
        case 12:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              stop_all_notes();
              PLAY_NOTE_ARRAY(tone_plover, false, 0);
            #endif
            layer_off(_RAISE);
            layer_off(_LOWER);
            layer_off(_ADJUST);
            layer_on(_PLOVER);
            if (!eeconfig_is_enabled()) {
                eeconfig_init();
            }
            keymap_config.raw = eeconfig_read_keymap();
            keymap_config.nkro = 1;
            eeconfig_update_keymap(keymap_config.raw);
          }
        break;
        case 13:
          if (record->event.pressed) {
            #ifdef AUDIO_ENABLE
              PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
            #endif
            layer_off(_PLOVER);
          }
        break;

      }
    return MACRO_NONE;
};
开发者ID:CognitiveBurden，项目名称:qmk_firmware，代码行数:93，代码来源:keymap.c


注：本文中的PLAY_NOTE_ARRAY函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。