当前位置: 首页>>代码示例>>C++>>正文


C++ PEMerr函数代码示例

本文整理汇总了C++中PEMerr函数的典型用法代码示例。如果您正苦于以下问题:C++ PEMerr函数的具体用法?C++ PEMerr怎么用?C++ PEMerr使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了PEMerr函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: EVP_PKEY_new

EVP_PKEY *PEM_read_bio_Parameters(BIO *bp, EVP_PKEY **x)
{
    char *nm = NULL;
    const unsigned char *p = NULL;
    unsigned char *data = NULL;
    long len;
    int slen;
    EVP_PKEY *ret = NULL;

    if (!PEM_bytes_read_bio(&data, &len, &nm, PEM_STRING_PARAMETERS,
                            bp, 0, NULL))
        return NULL;
    p = data;

    if ((slen = pem_check_suffix(nm, "PARAMETERS")) > 0) {
        ret = EVP_PKEY_new();
        if (!ret)
            goto err;
        if (!EVP_PKEY_set_type_str(ret, nm, slen)
            || !ret->ameth->param_decode
            || !ret->ameth->param_decode(ret, &p, len)) {
            EVP_PKEY_free(ret);
            ret = NULL;
            goto err;
        }
        if (x) {
            if (*x)
                EVP_PKEY_free((EVP_PKEY *)*x);
            *x = ret;
        }
    }
 err:
    if (ret == NULL)
        PEMerr(PEM_F_PEM_READ_BIO_PARAMETERS, ERR_R_ASN1_LIB);
    OPENSSL_free(nm);
    OPENSSL_free(data);
    return (ret);
}
开发者ID:2014lh,项目名称:node-v0.x-archive,代码行数:38,代码来源:pem_pkey.c

示例2: d2i_DHxparams

DH *PEM_read_bio_DHparams(BIO *bp, DH **x, pem_password_cb *cb, void *u)
{
    char *nm = NULL;
    const unsigned char *p = NULL;
    unsigned char *data = NULL;
    long len;
    DH *ret = NULL;

    if (!PEM_bytes_read_bio(&data, &len, &nm, PEM_STRING_DHPARAMS, bp, cb, u))
        return NULL;
    p = data;

    if (strcmp(nm, PEM_STRING_DHXPARAMS) == 0)
        ret = d2i_DHxparams(x, &p, len);
    else
        ret = d2i_DHparams(x, &p, len);

    if (ret == NULL)
        PEMerr(PEM_F_PEM_READ_BIO_DHPARAMS, ERR_R_ASN1_LIB);
    OPENSSL_free(nm);
    OPENSSL_free(data);
    return ret;
}
开发者ID:AndreV84,项目名称:openssl,代码行数:23,代码来源:pem_pkey.c

示例3: d2i_PKCS8PrivateKey_bio

EVP_PKEY *
d2i_PKCS8PrivateKey_bio(BIO *bp, EVP_PKEY **x, pem_password_cb *cb, void *u)
{
	PKCS8_PRIV_KEY_INFO *p8inf = NULL;
	X509_SIG *p8 = NULL;
	int klen;
	EVP_PKEY *ret;
	char psbuf[PEM_BUFSIZE];

	p8 = d2i_PKCS8_bio(bp, NULL);
	if (!p8)
		return NULL;
	if (cb)
		klen = cb(psbuf, PEM_BUFSIZE, 0, u);
	else
		klen = PEM_def_callback(psbuf, PEM_BUFSIZE, 0, u);
	if (klen <= 0) {
		PEMerr(PEM_F_D2I_PKCS8PRIVATEKEY_BIO, PEM_R_BAD_PASSWORD_READ);
		X509_SIG_free(p8);
		return NULL;
	}
	p8inf = PKCS8_decrypt(p8, psbuf, klen);
	X509_SIG_free(p8);
	if (!p8inf)
		return NULL;
	ret = EVP_PKCS82PKEY(p8inf);
	PKCS8_PRIV_KEY_INFO_free(p8inf);
	if (!ret)
		return NULL;
	if (x) {
		if (*x)
			EVP_PKEY_free(*x);
		*x = ret;
	}
	return ret;
}
开发者ID:awakecoding,项目名称:libressl,代码行数:36,代码来源:pem_pk8.c

示例4: PEM_SignFinal

int PEM_SignFinal(EVP_MD_CTX *ctx, unsigned char *sigret, unsigned int *siglen,
	     EVP_PKEY *pkey)
	{
	unsigned char *m;
	int i,ret=0;
	unsigned int m_len;

	m=(unsigned char *)OPENSSL_malloc(EVP_PKEY_size(pkey)+2);
	if (m == NULL)
		{
		PEMerr(PEM_F_PEM_SIGNFINAL,ERR_R_MALLOC_FAILURE);
		goto err;
		}

	if (EVP_SignFinal(ctx,m,&m_len,pkey) <= 0) goto err;

	i=EVP_EncodeBlock(sigret,m,m_len);
	*siglen=i;
	ret=1;
err:
	/* ctx has been zeroed by EVP_SignFinal() */
	if (m != NULL) OPENSSL_free(m);
	return(ret);
	}
开发者ID:ahenroid,项目名称:ptptl-0.2,代码行数:24,代码来源:pem_sign.c

示例5: PEM_read_bio_ex

/**
 * Read in PEM-formatted data from the given BIO.
 *
 * By nature of the PEM format, all content must be printable ASCII (except
 * for line endings).  Other characters are malformed input and will be rejected.
 */
int PEM_read_bio_ex(BIO *bp, char **name_out, char **header,
                    unsigned char **data, long *len_out, unsigned int flags)
{
    EVP_ENCODE_CTX *ctx = EVP_ENCODE_CTX_new();
    const BIO_METHOD *bmeth;
    BIO *headerB = NULL, *dataB = NULL;
    char *name = NULL;
    int len, taillen, headerlen, ret = 0;
    BUF_MEM * buf_mem;

    if (ctx == NULL) {
        PEMerr(PEM_F_PEM_READ_BIO_EX, ERR_R_MALLOC_FAILURE);
        return 0;
    }

    *len_out = 0;
    *name_out = *header = NULL;
    *data = NULL;
    if ((flags & PEM_FLAG_EAY_COMPATIBLE) && (flags & PEM_FLAG_ONLY_B64)) {
        /* These two are mutually incompatible; bail out. */
        PEMerr(PEM_F_PEM_READ_BIO_EX, ERR_R_PASSED_INVALID_ARGUMENT);
        goto end;
    }
    bmeth = (flags & PEM_FLAG_SECURE) ? BIO_s_secmem() : BIO_s_mem();

    headerB = BIO_new(bmeth);
    dataB = BIO_new(bmeth);
    if (headerB == NULL || dataB == NULL) {
        PEMerr(PEM_F_PEM_READ_BIO_EX, ERR_R_MALLOC_FAILURE);
        goto end;
    }

    if (!get_name(bp, &name, flags))
        goto end;
    if (!get_header_and_data(bp, &headerB, &dataB, name, flags))
        goto end;

    EVP_DecodeInit(ctx);
    BIO_get_mem_ptr(dataB, &buf_mem);
    len = buf_mem->length;
    if (EVP_DecodeUpdate(ctx, (unsigned char*)buf_mem->data, &len,
                         (unsigned char*)buf_mem->data, len) < 0
            || EVP_DecodeFinal(ctx, (unsigned char*)&(buf_mem->data[len]),
                               &taillen) < 0) {
        PEMerr(PEM_F_PEM_READ_BIO_EX, PEM_R_BAD_BASE64_DECODE);
        goto end;
    }
    len += taillen;
    buf_mem->length = len;

    /* There was no data in the PEM file; avoid malloc(0). */
    if (len == 0)
        goto end;
    headerlen = BIO_get_mem_data(headerB, NULL);
    *header = pem_malloc(headerlen + 1, flags);
    *data = pem_malloc(len, flags);
    if (*header == NULL || *data == NULL) {
        pem_free(*header, flags, 0);
        pem_free(*data, flags, 0);
        goto end;
    }
    BIO_read(headerB, *header, headerlen);
    (*header)[headerlen] = '\0';
    BIO_read(dataB, *data, len);
    *len_out = len;
    *name_out = name;
    name = NULL;
    ret = 1;

end:
    EVP_ENCODE_CTX_free(ctx);
    pem_free(name, flags, 0);
    BIO_free(headerB);
    BIO_free(dataB);
    return ret;
}
开发者ID:Ana06,项目名称:openssl,代码行数:82,代码来源:pem_lib.c

示例6: get_header_and_data

/**
 * Extract the optional PEM header, with details on the type of content and
 * any encryption used on the contents, and the bulk of the data from the bio.
 * The end of the header is marked by a blank line; if the end-of-input marker
 * is reached prior to a blank line, there is no header.
 *
 * The header and data arguments are BIO** since we may have to swap them
 * if there is no header, for efficiency.
 *
 * We need the name of the PEM-encoded type to verify the end string.
 */
static int get_header_and_data(BIO *bp, BIO **header, BIO **data, char *name,
                               unsigned int flags)
{
    BIO *tmp = *header;
    char *linebuf, *p;
    int len, line, ret = 0, end = 0;
    /* 0 if not seen (yet), 1 if reading header, 2 if finished header */
    enum header_status got_header = MAYBE_HEADER;
    unsigned int flags_mask;
    size_t namelen;

    /* Need to hold trailing NUL (accounted for by BIO_gets() and the newline
     * that will be added by sanitize_line() (the extra '1'). */
    linebuf = pem_malloc(LINESIZE + 1, flags);
    if (linebuf == NULL) {
        PEMerr(PEM_F_GET_HEADER_AND_DATA, ERR_R_MALLOC_FAILURE);
        return 0;
    }

    for (line = 0; ; line++) {
        flags_mask = ~0u;
        len = BIO_gets(bp, linebuf, LINESIZE);
        if (len <= 0) {
            PEMerr(PEM_F_GET_HEADER_AND_DATA, PEM_R_SHORT_HEADER);
            goto err;
        }

        if (got_header == MAYBE_HEADER) {
            if (memchr(linebuf, ':', len) != NULL)
                got_header = IN_HEADER;
        }
        if (!strncmp(linebuf, endstr, ENDLEN) || got_header == IN_HEADER)
            flags_mask &= ~PEM_FLAG_ONLY_B64;
        len = sanitize_line(linebuf, len, flags & flags_mask);

        /* Check for end of header. */
        if (linebuf[0] == '\n') {
            if (got_header == POST_HEADER) {
                /* Another blank line is an error. */
                PEMerr(PEM_F_GET_HEADER_AND_DATA, PEM_R_BAD_END_LINE);
                goto err;
            }
            got_header = POST_HEADER;
            tmp = *data;
            continue;
        }

        /* Check for end of stream (which means there is no header). */
        if (strncmp(linebuf, endstr, ENDLEN) == 0) {
            p = linebuf + ENDLEN;
            namelen = strlen(name);
            if (strncmp(p, name, namelen) != 0 ||
                strncmp(p + namelen, tailstr, TAILLEN) != 0) {
                PEMerr(PEM_F_GET_HEADER_AND_DATA, PEM_R_BAD_END_LINE);
                goto err;
            }
            if (got_header == MAYBE_HEADER) {
                *header = *data;
                *data = tmp;
            }
            break;
        } else if (end) {
            /* Malformed input; short line not at end of data. */
            PEMerr(PEM_F_GET_HEADER_AND_DATA, PEM_R_BAD_END_LINE);
            goto err;
        }
        /*
         * Else, a line of text -- could be header or data; we don't
         * know yet.  Just pass it through.
         */
        if (BIO_puts(tmp, linebuf) < 0)
            goto err;
        /*
         * Only encrypted files need the line length check applied.
         */
        if (got_header == POST_HEADER) {
            /* 65 includes the trailing newline */
            if (len > 65)
                goto err;
            if (len < 65)
                end = 1;
        }
    }

    ret = 1;
err:
    pem_free(linebuf, flags, LINESIZE + 1);
    return ret;
}
开发者ID:Ana06,项目名称:openssl,代码行数:100,代码来源:pem_lib.c

示例7: PEM_write_bio

int PEM_write_bio(BIO *bp, const char *name, const char *header,
                  const unsigned char *data, long len)
{
    int nlen, n, i, j, outl;
    unsigned char *buf = NULL;
    EVP_ENCODE_CTX *ctx = EVP_ENCODE_CTX_new();
    int reason = ERR_R_BUF_LIB;
    int retval = 0;

    if (ctx == NULL) {
        reason = ERR_R_MALLOC_FAILURE;
        goto err;
    }

    EVP_EncodeInit(ctx);
    nlen = strlen(name);

    if ((BIO_write(bp, "-----BEGIN ", 11) != 11) ||
        (BIO_write(bp, name, nlen) != nlen) ||
        (BIO_write(bp, "-----\n", 6) != 6))
        goto err;

    i = strlen(header);
    if (i > 0) {
        if ((BIO_write(bp, header, i) != i) || (BIO_write(bp, "\n", 1) != 1))
            goto err;
    }

    buf = OPENSSL_malloc(PEM_BUFSIZE * 8);
    if (buf == NULL) {
        reason = ERR_R_MALLOC_FAILURE;
        goto err;
    }

    i = j = 0;
    while (len > 0) {
        n = (int)((len > (PEM_BUFSIZE * 5)) ? (PEM_BUFSIZE * 5) : len);
        if (!EVP_EncodeUpdate(ctx, buf, &outl, &(data[j]), n))
            goto err;
        if ((outl) && (BIO_write(bp, (char *)buf, outl) != outl))
            goto err;
        i += outl;
        len -= n;
        j += n;
    }
    EVP_EncodeFinal(ctx, buf, &outl);
    if ((outl > 0) && (BIO_write(bp, (char *)buf, outl) != outl))
        goto err;
    if ((BIO_write(bp, "-----END ", 9) != 9) ||
        (BIO_write(bp, name, nlen) != nlen) ||
        (BIO_write(bp, "-----\n", 6) != 6))
        goto err;
    retval = i + outl;

 err:
    if (retval == 0)
        PEMerr(PEM_F_PEM_WRITE_BIO, reason);
    EVP_ENCODE_CTX_free(ctx);
    OPENSSL_clear_free(buf, PEM_BUFSIZE * 8);
    return retval;
}
开发者ID:Ana06,项目名称:openssl,代码行数:61,代码来源:pem_lib.c

示例8: PEM_get_EVP_CIPHER_INFO

/*
 * This implements a very limited PEM header parser that does not support the
 * full grammar of rfc1421.  In particular, folded headers are not supported,
 * nor is additional whitespace.
 *
 * A robust implementation would make use of a library that turns the headers
 * into a BIO from which one folded line is read at a time, and is then split
 * into a header label and content.  We would then parse the content of the
 * headers we care about.  This is overkill for just this limited use-case, but
 * presumably we also parse rfc822-style headers for S/MIME, so a common
 * abstraction might well be more generally useful.
 */
int PEM_get_EVP_CIPHER_INFO(char *header, EVP_CIPHER_INFO *cipher)
{
    static const char ProcType[] = "Proc-Type:";
    static const char ENCRYPTED[] = "ENCRYPTED";
    static const char DEKInfo[] = "DEK-Info:";
    const EVP_CIPHER *enc = NULL;
    int ivlen;
    char *dekinfostart, c;

    cipher->cipher = NULL;
    memset(cipher->iv, 0, sizeof(cipher->iv));
    if ((header == NULL) || (*header == '\0') || (*header == '\n'))
        return 1;

    if (strncmp(header, ProcType, sizeof(ProcType)-1) != 0) {
        PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO, PEM_R_NOT_PROC_TYPE);
        return 0;
    }
    header += sizeof(ProcType)-1;
    header += strspn(header, " \t");

    if (*header++ != '4' || *header++ != ',')
        return 0;
    header += strspn(header, " \t");

    /* We expect "ENCRYPTED" followed by optional white-space + line break */
    if (strncmp(header, ENCRYPTED, sizeof(ENCRYPTED)-1) != 0 ||
        strspn(header+sizeof(ENCRYPTED)-1, " \t\r\n") == 0) {
        PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO, PEM_R_NOT_ENCRYPTED);
        return 0;
    }
    header += sizeof(ENCRYPTED)-1;
    header += strspn(header, " \t\r");
    if (*header++ != '\n') {
        PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO, PEM_R_SHORT_HEADER);
        return 0;
    }

    /*-
     * https://tools.ietf.org/html/rfc1421#section-4.6.1.3
     * We expect "DEK-Info: algo[,hex-parameters]"
     */
    if (strncmp(header, DEKInfo, sizeof(DEKInfo)-1) != 0) {
        PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO, PEM_R_NOT_DEK_INFO);
        return 0;
    }
    header += sizeof(DEKInfo)-1;
    header += strspn(header, " \t");

    /*
     * DEK-INFO is a comma-separated combination of algorithm name and optional
     * parameters.
     */
    dekinfostart = header;
    header += strcspn(header, " \t,");
    c = *header;
    *header = '\0';
    cipher->cipher = enc = EVP_get_cipherbyname(dekinfostart);
    *header = c;
    header += strspn(header, " \t");

    if (enc == NULL) {
        PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO, PEM_R_UNSUPPORTED_ENCRYPTION);
        return 0;
    }
    ivlen = EVP_CIPHER_iv_length(enc);
    if (ivlen > 0 && *header++ != ',') {
        PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO, PEM_R_MISSING_DEK_IV);
        return 0;
    } else if (ivlen == 0 && *header == ',') {
        PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO, PEM_R_UNEXPECTED_DEK_IV);
        return 0;
    }

    if (!load_iv(&header, cipher->iv, EVP_CIPHER_iv_length(enc)))
        return 0;

    return 1;
}
开发者ID:Ana06,项目名称:openssl,代码行数:91,代码来源:pem_lib.c

示例9: PEM_ASN1_write_bio

int PEM_ASN1_write_bio(i2d_of_void *i2d, const char *name, BIO *bp,
                       void *x, const EVP_CIPHER *enc, unsigned char *kstr,
                       int klen, pem_password_cb *callback, void *u)
{
    EVP_CIPHER_CTX *ctx = NULL;
    int dsize = 0, i = 0, j = 0, ret = 0;
    unsigned char *p, *data = NULL;
    const char *objstr = NULL;
    char buf[PEM_BUFSIZE];
    unsigned char key[EVP_MAX_KEY_LENGTH];
    unsigned char iv[EVP_MAX_IV_LENGTH];

    if (enc != NULL) {
        objstr = OBJ_nid2sn(EVP_CIPHER_nid(enc));
        if (objstr == NULL || EVP_CIPHER_iv_length(enc) == 0
                || EVP_CIPHER_iv_length(enc) > (int)sizeof(iv)
                   /*
                    * Check "Proc-Type: 4,Encrypted\nDEK-Info: objstr,hex-iv\n"
                    * fits into buf
                    */
                || (strlen(objstr) + 23 + 2 * EVP_CIPHER_iv_length(enc) + 13)
                   > sizeof(buf)) {
            PEMerr(PEM_F_PEM_ASN1_WRITE_BIO, PEM_R_UNSUPPORTED_CIPHER);
            goto err;
        }
    }

    if ((dsize = i2d(x, NULL)) < 0) {
        PEMerr(PEM_F_PEM_ASN1_WRITE_BIO, ERR_R_ASN1_LIB);
        dsize = 0;
        goto err;
    }
    /* dsize + 8 bytes are needed */
    /* actually it needs the cipher block size extra... */
    data = OPENSSL_malloc((unsigned int)dsize + 20);
    if (data == NULL) {
        PEMerr(PEM_F_PEM_ASN1_WRITE_BIO, ERR_R_MALLOC_FAILURE);
        goto err;
    }
    p = data;
    i = i2d(x, &p);

    if (enc != NULL) {
        if (kstr == NULL) {
            if (callback == NULL)
                klen = PEM_def_callback(buf, PEM_BUFSIZE, 1, u);
            else
                klen = (*callback) (buf, PEM_BUFSIZE, 1, u);
            if (klen <= 0) {
                PEMerr(PEM_F_PEM_ASN1_WRITE_BIO, PEM_R_READ_KEY);
                goto err;
            }
#ifdef CHARSET_EBCDIC
            /* Convert the pass phrase from EBCDIC */
            ebcdic2ascii(buf, buf, klen);
#endif
            kstr = (unsigned char *)buf;
        }
        if (RAND_bytes(iv, EVP_CIPHER_iv_length(enc)) <= 0) /* Generate a salt */
            goto err;
        /*
         * The 'iv' is used as the iv and as a salt.  It is NOT taken from
         * the BytesToKey function
         */
        if (!EVP_BytesToKey(enc, EVP_md5(), iv, kstr, klen, 1, key, NULL))
            goto err;

        if (kstr == (unsigned char *)buf)
            OPENSSL_cleanse(buf, PEM_BUFSIZE);

        buf[0] = '\0';
        PEM_proc_type(buf, PEM_TYPE_ENCRYPTED);
        PEM_dek_info(buf, objstr, EVP_CIPHER_iv_length(enc), (char *)iv);
        /* k=strlen(buf); */

        ret = 1;
        if ((ctx = EVP_CIPHER_CTX_new()) == NULL
            || !EVP_EncryptInit_ex(ctx, enc, NULL, key, iv)
            || !EVP_EncryptUpdate(ctx, data, &j, data, i)
            || !EVP_EncryptFinal_ex(ctx, &(data[j]), &i))
            ret = 0;
        if (ret == 0)
            goto err;
        i += j;
    } else {
        ret = 1;
        buf[0] = '\0';
    }
    i = PEM_write_bio(bp, name, buf, data, i);
    if (i <= 0)
        ret = 0;
 err:
    OPENSSL_cleanse(key, sizeof(key));
    OPENSSL_cleanse(iv, sizeof(iv));
    EVP_CIPHER_CTX_free(ctx);
    OPENSSL_cleanse(buf, PEM_BUFSIZE);
    OPENSSL_clear_free(data, (unsigned int)dsize);
    return ret;
}
开发者ID:Ana06,项目名称:openssl,代码行数:99,代码来源:pem_lib.c

示例10: PEM_read_bio_PrivateKey

EVP_PKEY *
PEM_read_bio_PrivateKey(BIO *bp, EVP_PKEY **x, pem_password_cb *cb, void *u)
{
	char *nm = NULL;
	const unsigned char *p = NULL;
	unsigned char *data = NULL;
	long len;
	int slen;
	EVP_PKEY *ret = NULL;

	if (!PEM_bytes_read_bio(&data, &len, &nm, PEM_STRING_EVP_PKEY,
	    bp, cb, u))
		return NULL;
	p = data;

	if (strcmp(nm, PEM_STRING_PKCS8INF) == 0) {
		PKCS8_PRIV_KEY_INFO *p8inf;
		p8inf = d2i_PKCS8_PRIV_KEY_INFO(NULL, &p, len);
		if (!p8inf)
			goto p8err;
		ret = EVP_PKCS82PKEY(p8inf);
		if (x) {
			EVP_PKEY_free(*x);
			*x = ret;
		}
		PKCS8_PRIV_KEY_INFO_free(p8inf);
	} else if (strcmp(nm, PEM_STRING_PKCS8) == 0) {
		PKCS8_PRIV_KEY_INFO *p8inf;
		X509_SIG *p8;
		int klen;
		char psbuf[PEM_BUFSIZE];
		p8 = d2i_X509_SIG(NULL, &p, len);
		if (!p8)
			goto p8err;
		if (cb)
			klen = cb(psbuf, PEM_BUFSIZE, 0, u);
		else
			klen = PEM_def_callback(psbuf, PEM_BUFSIZE, 0, u);
		if (klen <= 0) {
			PEMerr(PEM_F_PEM_READ_BIO_PRIVATEKEY,
			    PEM_R_BAD_PASSWORD_READ);
			X509_SIG_free(p8);
			goto err;
		}
		p8inf = PKCS8_decrypt(p8, psbuf, klen);
		X509_SIG_free(p8);
		if (!p8inf)
			goto p8err;
		ret = EVP_PKCS82PKEY(p8inf);
		if (x) {
			EVP_PKEY_free(*x);
			*x = ret;
		}
		PKCS8_PRIV_KEY_INFO_free(p8inf);
	} else if ((slen = pem_check_suffix(nm, "PRIVATE KEY")) > 0) {
		const EVP_PKEY_ASN1_METHOD *ameth;
		ameth = EVP_PKEY_asn1_find_str(NULL, nm, slen);
		if (!ameth || !ameth->old_priv_decode)
			goto p8err;
		ret = d2i_PrivateKey(ameth->pkey_id, x, &p, len);
	}

p8err:
	if (ret == NULL)
		PEMerr(PEM_F_PEM_READ_BIO_PRIVATEKEY, ERR_R_ASN1_LIB);
err:
	free(nm);
	OPENSSL_cleanse(data, len);
	free(data);
	return (ret);
}
开发者ID:LeSuisse,项目名称:libressl-salsa20,代码行数:71,代码来源:pem_pkey.c

示例11: i2b_PVK

static int i2b_PVK(unsigned char **out, EVP_PKEY *pk, int enclevel,
                   pem_password_cb *cb, void *u)
{
    int outlen = 24, pklen;
    unsigned char *p, *salt = NULL;
    EVP_CIPHER_CTX *cctx = EVP_CIPHER_CTX_new();
    if (enclevel)
        outlen += PVK_SALTLEN;
    pklen = do_i2b(NULL, pk, 0);
    if (pklen < 0)
        return -1;
    outlen += pklen;
    if (!out)
        return outlen;
    if (*out)
        p = *out;
    else {
        p = OPENSSL_malloc(outlen);
        if (p == NULL) {
            PEMerr(PEM_F_I2B_PVK, ERR_R_MALLOC_FAILURE);
            return -1;
        }
        *out = p;
    }

    write_ledword(&p, MS_PVKMAGIC);
    write_ledword(&p, 0);
    if (EVP_PKEY_id(pk) == EVP_PKEY_DSA)
        write_ledword(&p, MS_KEYTYPE_SIGN);
    else
        write_ledword(&p, MS_KEYTYPE_KEYX);
    write_ledword(&p, enclevel ? 1 : 0);
    write_ledword(&p, enclevel ? PVK_SALTLEN : 0);
    write_ledword(&p, pklen);
    if (enclevel) {
        if (RAND_bytes(p, PVK_SALTLEN) <= 0)
            goto error;
        salt = p;
        p += PVK_SALTLEN;
    }
    do_i2b(&p, pk, 0);
    if (enclevel == 0)
        return outlen;
    else {
        char psbuf[PEM_BUFSIZE];
        unsigned char keybuf[20];
        int enctmplen, inlen;
        if (cb)
            inlen = cb(psbuf, PEM_BUFSIZE, 1, u);
        else
            inlen = PEM_def_callback(psbuf, PEM_BUFSIZE, 1, u);
        if (inlen <= 0) {
            PEMerr(PEM_F_I2B_PVK, PEM_R_BAD_PASSWORD_READ);
            goto error;
        }
        if (!derive_pvk_key(keybuf, salt, PVK_SALTLEN,
                            (unsigned char *)psbuf, inlen))
            goto error;
        if (enclevel == 1)
            memset(keybuf + 5, 0, 11);
        p = salt + PVK_SALTLEN + 8;
        if (!EVP_EncryptInit_ex(cctx, EVP_rc4(), NULL, keybuf, NULL))
            goto error;
        OPENSSL_cleanse(keybuf, 20);
        if (!EVP_DecryptUpdate(cctx, p, &enctmplen, p, pklen - 8))
            goto error;
        if (!EVP_DecryptFinal_ex(cctx, p + enctmplen, &enctmplen))
            goto error;
    }
    EVP_CIPHER_CTX_free(cctx);
    return outlen;

 error:
    EVP_CIPHER_CTX_free(cctx);
    return -1;
}
开发者ID:277800076,项目名称:openssl,代码行数:76,代码来源:pvkfmt.c

示例12: PEM_ASN1_write_bio

int PEM_ASN1_write_bio(i2d_of_void *i2d, const char *name, BIO *bp,
           char *x, const EVP_CIPHER *enc, unsigned char *kstr,
           int klen, pem_password_cb *callback, void *u)
  {
  EVP_CIPHER_CTX ctx;
  int dsize=0,i,j,ret=0;
  unsigned char *p,*data=NULL;
  const char *objstr=NULL;
  char buf[PEM_BUFSIZE];
  unsigned char key[EVP_MAX_KEY_LENGTH];
  unsigned char iv[EVP_MAX_IV_LENGTH];
  
  if (enc != NULL)
    {
    objstr=OBJ_nid2sn(EVP_CIPHER_nid(enc));
    if (objstr == NULL)
      {
      PEMerr(PEM_F_PEM_ASN1_WRITE_BIO,PEM_R_UNSUPPORTED_CIPHER);
      goto err;
      }
    }

  if ((dsize=i2d(x,NULL)) < 0)
    {
    PEMerr(PEM_F_PEM_ASN1_WRITE_BIO,ERR_R_ASN1_LIB);
    dsize=0;
    goto err;
    }
  /* dzise + 8 bytes are needed */
  /* actually it needs the cipher block size extra... */
  data=(unsigned char *)OPENSSL_malloc((unsigned int)dsize+20);
  if (data == NULL)
    {
    PEMerr(PEM_F_PEM_ASN1_WRITE_BIO,ERR_R_MALLOC_FAILURE);
    goto err;
    }
  p=data;
  i=i2d(x,&p);

  if (enc != NULL)
    {
    if (kstr == NULL)
      {
      if (callback == NULL)
        klen=PEM_def_callback(buf,PEM_BUFSIZE,1,u);
      else
        klen=(*callback)(buf,PEM_BUFSIZE,1,u);
      if (klen <= 0)
        {
        PEMerr(PEM_F_PEM_ASN1_WRITE_BIO,PEM_R_READ_KEY);
        goto err;
        }
#ifdef CHARSET_EBCDIC
      /* Convert the pass phrase from EBCDIC */
      ebcdic2ascii(buf, buf, klen);
#endif
      kstr=(unsigned char *)buf;
      }
    RAND_add(data,i,0);/* put in the RSA key. */
    OPENSSL_assert(enc->iv_len <= (int)sizeof(iv));
    if (RAND_pseudo_bytes(iv,enc->iv_len) < 0) /* Generate a salt */
      goto err;
    /* The 'iv' is used as the iv and as a salt.  It is
     * NOT taken from the BytesToKey function */
    EVP_BytesToKey(enc,EVP_md5(),iv,kstr,klen,1,key,NULL);

    if (kstr == (unsigned char *)buf) OPENSSL_cleanse(buf,PEM_BUFSIZE);

    OPENSSL_assert(strlen(objstr)+23+2*enc->iv_len+13 <= sizeof buf);

    buf[0]='\0';
    PEM_proc_type(buf,PEM_TYPE_ENCRYPTED);
    PEM_dek_info(buf,objstr,enc->iv_len,(char *)iv);
    /* k=strlen(buf); */

    EVP_CIPHER_CTX_init(&ctx);
    EVP_EncryptInit_ex(&ctx,enc,NULL,key,iv);
    EVP_EncryptUpdate(&ctx,data,&j,data,i);
    EVP_EncryptFinal_ex(&ctx,&(data[j]),&i);
    EVP_CIPHER_CTX_cleanup(&ctx);
    i+=j;
    ret=1;
    }
  else
    {
    ret=1;
    buf[0]='\0';
    }
  i=PEM_write_bio(bp,name,buf,data,i);
  if (i <= 0) ret=0;
err:
  OPENSSL_cleanse(key,sizeof(key));
  OPENSSL_cleanse(iv,sizeof(iv));
  OPENSSL_cleanse((char *)&ctx,sizeof(ctx));
  OPENSSL_cleanse(buf,PEM_BUFSIZE);
  if (data != NULL)
    {
    OPENSSL_cleanse(data,(unsigned int)dsize);
    OPENSSL_free(data);
    }
//.........这里部分代码省略.........
开发者ID:yyyyyao,项目名称:Slicer3-lib-mirrors,代码行数:101,代码来源:pem_lib.c

示例13: EVP_CIPHER_CTX_new

static EVP_PKEY *do_PVK_body(const unsigned char **in,
                             unsigned int saltlen, unsigned int keylen,
                             pem_password_cb *cb, void *u)
{
    EVP_PKEY *ret = NULL;
    const unsigned char *p = *in;
    unsigned int magic;
    unsigned char *enctmp = NULL, *q;

    EVP_CIPHER_CTX *cctx = EVP_CIPHER_CTX_new();
    if (saltlen) {
        char psbuf[PEM_BUFSIZE];
        unsigned char keybuf[20];
        int enctmplen, inlen;
        if (cb)
            inlen = cb(psbuf, PEM_BUFSIZE, 0, u);
        else
            inlen = PEM_def_callback(psbuf, PEM_BUFSIZE, 0, u);
        if (inlen <= 0) {
            PEMerr(PEM_F_DO_PVK_BODY, PEM_R_BAD_PASSWORD_READ);
            goto err;
        }
        enctmp = OPENSSL_malloc(keylen + 8);
        if (enctmp == NULL) {
            PEMerr(PEM_F_DO_PVK_BODY, ERR_R_MALLOC_FAILURE);
            goto err;
        }
        if (!derive_pvk_key(keybuf, p, saltlen,
                            (unsigned char *)psbuf, inlen))
            goto err;
        p += saltlen;
        /* Copy BLOBHEADER across, decrypt rest */
        memcpy(enctmp, p, 8);
        p += 8;
        if (keylen < 8) {
            PEMerr(PEM_F_DO_PVK_BODY, PEM_R_PVK_TOO_SHORT);
            goto err;
        }
        inlen = keylen - 8;
        q = enctmp + 8;
        if (!EVP_DecryptInit_ex(cctx, EVP_rc4(), NULL, keybuf, NULL))
            goto err;
        if (!EVP_DecryptUpdate(cctx, q, &enctmplen, p, inlen))
            goto err;
        if (!EVP_DecryptFinal_ex(cctx, q + enctmplen, &enctmplen))
            goto err;
        magic = read_ledword((const unsigned char **)&q);
        if (magic != MS_RSA2MAGIC && magic != MS_DSS2MAGIC) {
            q = enctmp + 8;
            memset(keybuf + 5, 0, 11);
            if (!EVP_DecryptInit_ex(cctx, EVP_rc4(), NULL, keybuf, NULL))
                goto err;
            OPENSSL_cleanse(keybuf, 20);
            if (!EVP_DecryptUpdate(cctx, q, &enctmplen, p, inlen))
                goto err;
            if (!EVP_DecryptFinal_ex(cctx, q + enctmplen, &enctmplen))
                goto err;
            magic = read_ledword((const unsigned char **)&q);
            if (magic != MS_RSA2MAGIC && magic != MS_DSS2MAGIC) {
                PEMerr(PEM_F_DO_PVK_BODY, PEM_R_BAD_DECRYPT);
                goto err;
            }
        } else
            OPENSSL_cleanse(keybuf, 20);
        p = enctmp;
    }

    ret = b2i_PrivateKey(&p, keylen);
 err:
    EVP_CIPHER_CTX_free(cctx);
    OPENSSL_free(enctmp);
    return ret;
}
开发者ID:277800076,项目名称:openssl,代码行数:73,代码来源:pvkfmt.c

示例14: DSA_new

static EVP_PKEY *b2i_dss(const unsigned char **in,
                         unsigned int bitlen, int ispub)
{
    const unsigned char *p = *in;
    EVP_PKEY *ret = NULL;
    DSA *dsa = NULL;
    BN_CTX *ctx = NULL;
    unsigned int nbyte;
    BIGNUM *pbn = NULL, *qbn = NULL, *gbn = NULL, *priv_key = NULL;
    BIGNUM *pub_key = NULL;

    nbyte = (bitlen + 7) >> 3;

    dsa = DSA_new();
    ret = EVP_PKEY_new();
    if (dsa == NULL || ret == NULL)
        goto memerr;
    if (!read_lebn(&p, nbyte, &pbn))
        goto memerr;

    if (!read_lebn(&p, 20, &qbn))
        goto memerr;

    if (!read_lebn(&p, nbyte, &gbn))
        goto memerr;

    if (ispub) {
        if (!read_lebn(&p, nbyte, &pub_key))
            goto memerr;
    } else {
        if (!read_lebn(&p, 20, &priv_key))
            goto memerr;

        /* Calculate public key */
        pub_key = BN_new();
        if (pub_key == NULL)
            goto memerr;
        if ((ctx = BN_CTX_new()) == NULL)
            goto memerr;

        if (!BN_mod_exp(pub_key, gbn, priv_key, pbn, ctx))
            goto memerr;

        BN_CTX_free(ctx);
    }
    if (!DSA_set0_pqg(dsa, pbn, qbn, gbn))
        goto memerr;
    pbn = qbn = gbn = NULL;
    if (!DSA_set0_key(dsa, pub_key, priv_key))
        goto memerr;

    EVP_PKEY_set1_DSA(ret, dsa);
    DSA_free(dsa);
    *in = p;
    return ret;

 memerr:
    PEMerr(PEM_F_B2I_DSS, ERR_R_MALLOC_FAILURE);
    DSA_free(dsa);
    BN_free(pbn);
    BN_free(qbn);
    BN_free(gbn);
    BN_free(pub_key);
    BN_free(priv_key);
    EVP_PKEY_free(ret);
    BN_CTX_free(ctx);
    return NULL;
}
开发者ID:277800076,项目名称:openssl,代码行数:68,代码来源:pvkfmt.c

示例15: do_blob_header

static int do_blob_header(const unsigned char **in, unsigned int length,
				unsigned int *pmagic, unsigned int *pbitlen,
				int *pisdss, int *pispub)
	{
	const unsigned char *p = *in;
	if (length < 16)
		return 0;
	/* bType */
	if (*p == MS_PUBLICKEYBLOB)
		{
		if (*pispub == 0)
			{
			PEMerr(PEM_F_DO_BLOB_HEADER,
					PEM_R_EXPECTING_PRIVATE_KEY_BLOB);
			return 0;
			}
		*pispub = 1;
		}
	else if (*p == MS_PRIVATEKEYBLOB)
		{
		if (*pispub == 1)
			{
			PEMerr(PEM_F_DO_BLOB_HEADER,
					PEM_R_EXPECTING_PUBLIC_KEY_BLOB);
			return 0;
			}
		*pispub = 0;
		}
	else
		return 0;
	p++;
	/* Version */
	if (*p++ != 0x2)
		{
		PEMerr(PEM_F_DO_BLOB_HEADER, PEM_R_BAD_VERSION_NUMBER);
		return 0;
		}
	/* Ignore reserved, aiKeyAlg */
	p+= 6;
	*pmagic = read_ledword(&p);
	*pbitlen = read_ledword(&p);
	*pisdss = 0;
	switch (*pmagic)
		{

		case MS_DSS1MAGIC:
		*pisdss = 1;
		case MS_RSA1MAGIC:
		if (*pispub == 0)
			{
			PEMerr(PEM_F_DO_BLOB_HEADER,
					PEM_R_EXPECTING_PRIVATE_KEY_BLOB);
			return 0;
			}
		break;

		case MS_DSS2MAGIC:
		*pisdss = 1;
		case MS_RSA2MAGIC:
		if (*pispub == 1)
			{
			PEMerr(PEM_F_DO_BLOB_HEADER,
					PEM_R_EXPECTING_PUBLIC_KEY_BLOB);
			return 0;
			}
		break;

		default:
		PEMerr(PEM_F_DO_BLOB_HEADER, PEM_R_BAD_MAGIC_NUMBER);
		return -1;
		}
	*in = p;
	return 1;
	}
开发者ID:Wampamba-Nooh,项目名称:MicroFrameworkSDK-Mono,代码行数:74,代码来源:pvkfmt.cpp


注:本文中的PEMerr函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。