当前位置: 首页>>代码示例>>C++>>正文

C++ PARAM_TIMx函数代码示例

本文整理汇总了C++中PARAM_TIMx函数的典型用法代码示例。如果您正苦于以下问题：C++ PARAM_TIMx函数的具体用法？C++ PARAM_TIMx怎么用？C++ PARAM_TIMx使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了PARAM_TIMx函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: TIM_Init

/*********************************************************************//**
 * @brief 		Initial Timer/Counter device
 * 				 	Set Clock frequency for Timer
 * 					Set initial configuration for Timer
 * @param[in]	TIMx  Timer selection, should be:
 * 					- LPC_TIM0	:TIMER0 peripheral
 * 					- LPC_TIM1	:TIMER1 peripheral
 * 					- LPC_TIM2	:TIMER2 peripheral
 * 					- LPC_TIM3	:TIMER3 peripheral
 * @param[in]	TimerCounterMode Timer counter mode, should be:
 * 					- TIM_TIMER_MODE			:Timer mode
 * 					- TIM_COUNTER_RISING_MODE	:Counter rising mode
 * 					- TIM_COUNTER_FALLING_MODE	:Counter falling mode
 * 					- TIM_COUNTER_ANY_MODE		:Counter on both edges
 * @param[in]	TIM_ConfigStruct pointer to TIM_TIMERCFG_Type
 * 				that contains the configuration information for the
 *                    specified Timer peripheral.
 * @return 		None
 **********************************************************************/
void TIM_Init(LPC_TIMERn_Type *TIMx, TIM_MODE_OPT TimerCounterMode, void *TIM_ConfigStruct)
{
	TIM_TIMERCFG_Type *pTimeCfg;
	TIM_COUNTERCFG_Type *pCounterCfg;

	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_MODE_OPT(TimerCounterMode));

	//set power
	if (TIMx== LPC_TIMER0)
	{

	}
	else if (TIMx== LPC_TIMER1)
	{

	}

	else if (TIMx== LPC_TIMER2)
	{

	}
	else if (TIMx== LPC_TIMER3)
	{

	}

	TIMx->CCR &= ~TIM_CTCR_MODE_MASK;
	TIMx->CCR |= TIM_TIMER_MODE;

	TIMx->TC =0;
	TIMx->PC =0;
	TIMx->PR =0;
	TIMx->TCR |= (1<<1); //Reset Counter
	TIMx->TCR &= ~(1<<1); //release reset
	if (TimerCounterMode == TIM_TIMER_MODE )
	{
		pTimeCfg = (TIM_TIMERCFG_Type *)TIM_ConfigStruct;
		if (pTimeCfg->PrescaleOption  == TIM_PRESCALE_TICKVAL)
		{
			TIMx->PR   = pTimeCfg->PrescaleValue -1  ;
		}
		else
		{
			TIMx->PR   = converUSecToVal (converPtrToTimeNum(TIMx),pTimeCfg->PrescaleValue)-1;
		}
	}
	else
	{

		pCounterCfg = (TIM_COUNTERCFG_Type *)TIM_ConfigStruct;
		TIMx->CCR  &= ~TIM_CTCR_INPUT_MASK;
		if (pCounterCfg->CountInputSelect == TIM_COUNTER_INCAP1)
			TIMx->CCR |= _BIT(2);
	}

	// Clear interrupt pending
	TIMx->IR = 0xFFFFFFFF;

}
开发者ID:NeuronRobotics，项目名称:microcontroller-sample，代码行数:79，代码来源:lpc43xx_timer.c

示例2: TIM_DeInit

/*********************************************************************//**
 * @brief 		Close Timer/Counter device
 * @param[in]	TIMx  Pointer to timer device, should be:
 * 					- LPC_TIM0	:TIMER0 peripheral
 * 					- LPC_TIM1	:TIMER1 peripheral
 * 					- LPC_TIM2	:TIMER2 peripheral
 * 					- LPC_TIM3	:TIMER3 peripheral
 * @return 		None
 **********************************************************************/
void TIM_DeInit (LPC_TIMERn_Type *TIMx)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	// Disable timer/counter
	TIMx->TCR = 0x00;

}
开发者ID:NeuronRobotics，项目名称:microcontroller-sample，代码行数:16，代码来源:lpc43xx_timer.c

示例3: TIM_ClearIntPending

/*********************************************************************//**
 * @brief 		Clear Interrupt pending
 * @param[in]	TIMx Timer selection, should be LPC_TMR16B0, 
 *                   LPC_TMR16B1, LPC_TMR32B0, LPC_TMR32B1
 * @param[in]	IntFlag should be in TIM_INT_TYPE enum
 * @return 		None
 **********************************************************************/
void TIM_ClearIntPending(TMR_TypeDef *TIMx, uint8_t IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));

	TIMx->IR = TIM_IR_CLR(IntFlag) 	;
}
开发者ID:inf3ct3d，项目名称:fmtr，代码行数:14，代码来源:lpc11xx_tmr.c

示例4: TIM_Cmd

/*********************************************************************//**
 * @brief	 	Start/Stop Timer/Counter device
 * @param[in]	TIMx Pointer to timer device, should be LPC_TMR16B0, 
 *                    LPC_TMR16B1, LPC_TMR32B0, LPC_TMR32B1
 * @param[in]	NewState
 * 				-	ENABLE  : set timer enable
 * 				-	DISABLE : disable timer
 * @return 		None
 **********************************************************************/
void TIM_Cmd(TMR_TypeDef *TIMx, FunctionalState NewState)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	if (NewState == ENABLE) {
		TIMx->TCR	|=  TIM_ENABLE;
	} else {
		TIMx->TCR &= ~TIM_ENABLE;
	}
}
开发者ID:inf3ct3d，项目名称:fmtr，代码行数:18，代码来源:lpc11xx_tmr.c

示例5: TIM_GetIntCaptureStatus

/*********************************************************************//**
 * @brief 		Get Capture Interrupt Status
 * @param[in]	TIMx Timer selection, should be TIM0, TIM1, TIM2, TIM3
 * @param[in]	IntFlag
 * @return 		FlagStatus
 * 				- SET : interrupt
 * 				- RESET : no interrupt
 **********************************************************************/
FlagStatus TIM_GetIntCaptureStatus(LPC_TIM_TypeDef *TIMx, uint8_t IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	uint8_t temp = (TIMx->IR) & (1<<(4+IntFlag));
	if(temp)
		return SET;
	return RESET;
}
开发者ID:ashrayjain，项目名称:ee2024-assignment2，代码行数:17，代码来源:lpc17xx_timer.c

示例6: TIM_GetIntCaptureStatus

/*********************************************************************//**
 * @brief 		Get Capture Interrupt Status
 * @param[in]	TIMx Timer selection, should be:
 *  	   		- LPC_TIM0: TIMER0 peripheral
 * 				- LPC_TIM1: TIMER1 peripheral
 * 				- LPC_TIM2: TIMER2 peripheral
 * 				- LPC_TIM3: TIMER3 peripheral
 * @param[in]	IntFlag: interrupt type, should be:
 * 				- TIM_MR0_INT: Interrupt for Match channel 0
 * 				- TIM_MR1_INT: Interrupt for Match channel 1
 * 				- TIM_MR2_INT: Interrupt for Match channel 2
 * 				- TIM_MR3_INT: Interrupt for Match channel 3
 * 				- TIM_CR0_INT: Interrupt for Capture channel 0
 * 				- TIM_CR1_INT: Interrupt for Capture channel 1
 * @return 		FlagStatus
 * 				- SET : interrupt
 * 				- RESET : no interrupt
 **********************************************************************/
FlagStatus TIM_GetIntCaptureStatus(LPC_TIM_TypeDef *TIMx, TIM_INT_TYPE IntFlag)
{
	uint8_t temp;
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	temp = (TIMx->IR) & (1<<(4+IntFlag));
	if(temp)
		return (SET);
	return (RESET);
}
开发者ID:lnls-dig，项目名称:bpm-ipmi，代码行数:28，代码来源:lpc17xx_timer.c

示例7: TIM_GetCaptureValue

/*********************************************************************//**
 * @brief 		Read value of capture register in timer/counter device
 * @param[in]	TIMx Pointer to timer/counter device, should be:
 *  			- LPC_TIM0: TIMER0 peripheral
 * 				- LPC_TIM1: TIMER1 peripheral
 * 				- LPC_TIM2: TIMER2 peripheral
 * 				- LPC_TIM3: TIMER3 peripheral
 * @param[in]	CaptureChannel: capture channel number, should be:
 * 				- TIM_COUNTER_INCAP0: CAPn.0 input pin for TIMERn
 * 				- TIM_COUNTER_INCAP1: CAPn.1 input pin for TIMERn
 * @return 		Value of capture register
 **********************************************************************/
uint32_t TIM_GetCaptureValue(LPC_TIM_TypeDef *TIMx, TIM_COUNTER_INPUT_OPT CaptureChannel)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_COUNTER_INPUT_OPT(CaptureChannel));

	if(CaptureChannel==0)
		return TIMx->CR0;
	else
		return TIMx->CR1;
}
开发者ID:zhuhuijia0001，项目名称:eload，代码行数:22，代码来源:lpc17xx_timer.c

示例8: TIM_Init

/*********************************************************************//**
 * @brief 		Initial Timer/Counter device
 * 				 	Set Clock frequency for ADC
 * 					Set initial configuration for ADC
 * @param[in]	TIMx  Timer selection, should be LPC_TMR16B0, LPC_TMR16B1
 *                    LPC_TMR32B0, LPC_TMR32B1
 * @param[in]	TimerCounterMode TIM_MODE_OPT
 * @param[in]	TIM_ConfigStruct pointer to TIM_TIMERCFG_Type
 * 				that contains the configuration information for the
 *                    specified Timer peripheral.
 * @return 		None
 **********************************************************************/
void TIM_Init(TMR_TypeDef *TIMx, uint8_t TimerCounterMode, void *TIM_ConfigStruct)
{
	TIM_TIMERCFG_Type *pTimeCfg;
	TIM_COUNTERCFG_Type *pCounterCfg;
    uint32_t val;

	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_MODE_OPT(TimerCounterMode));

	// Set power
    if(TIMx == LPC_TMR16B0) {
        SYSCON_AHBPeriphClockCmd(SYSCON_AHBPeriph_CT16B0, ENABLE);    

    } else if(TIMx == LPC_TMR16B1) {
        SYSCON_AHBPeriphClockCmd(SYSCON_AHBPeriph_CT16B1, ENABLE);    
    
    } else if(TIMx == LPC_TMR32B0) {
        SYSCON_AHBPeriphClockCmd(SYSCON_AHBPeriph_CT32B0, ENABLE);    
    
    } else if(TIMx == LPC_TMR32B1) {
        SYSCON_AHBPeriphClockCmd(SYSCON_AHBPeriph_CT32B1, ENABLE);        
    } 
	
	TIMx->CCR &= ~TIM_CTCR_MODE_MASK;
	TIMx->CCR |= TimerCounterMode;

	TIMx->TC =0;
	TIMx->PC =0;
	TIMx->PR =0;

	if (TimerCounterMode == TIM_TIMER_MODE )
	{
		pTimeCfg = (TIM_TIMERCFG_Type *)TIM_ConfigStruct;
		if (pTimeCfg->PrescaleOption  == TIM_PRESCALE_TICKVAL) {
			val = pTimeCfg->PrescaleValue -1  ;            
		} else {
            val = TIM_ConverUSecToVal (pTimeCfg->PrescaleValue)-1;
		}

        if ((TIMx == LPC_TMR16B0) || (TIMx == LPC_TMR16B1)) {
            val &= 0xFFFF;
        }

        TIMx->PR = val;
	} else {
		pCounterCfg = (TIM_COUNTERCFG_Type *)TIM_ConfigStruct;
		TIMx->CCR  &= ~TIM_CTCR_INPUT_MASK;
		if (pCounterCfg->CountInputSelect == TIM_COUNTER_INCAP1)
			TIMx->CCR |= _BIT(2);
	}

	// Clear interrupt pending
	TIMx->IR = 0x3F;
}
开发者ID:inf3ct3d，项目名称:fmtr，代码行数:66，代码来源:lpc11xx_tmr.c

示例9: TIM_GetIntStatus

/*********************************************************************//**
 * @brief 		Get Interrupt Status
 * @param[in]	TIMx Timer selection, should be TIM0, TIM1, TIM2, TIM3
 * @param[in]	IntFlag
 * @return 		FlagStatus
 * 				- SET : interrupt
 * 				- RESET : no interrupt
 **********************************************************************/
FlagStatus TIM_GetIntStatus(TIM_TypeDef *TIMx, uint8_t IntFlag)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	uint8_t temp = (TIMx->IR)& TIM_IR_CLR(IntFlag);
	if (temp)
		return SET;

	return RESET;

}
开发者ID:devemouse，项目名称:glcd，代码行数:19，代码来源:lpc17xx_timer.c

示例10: TIM_GetIntStatus

/*********************************************************************//**
 * @brief 		Get Interrupt Status
 * @param[in]	TIMx Timer selection, should be:
 * 					- LPC_TIM0	:TIMER0 peripheral
 * 					- LPC_TIM1	:TIMER1 peripheral
 * 					- LPC_TIM2	:TIMER2 peripheral
 * 					- LPC_TIM3	:TIMER3 peripheral
 * @param[in]	IntFlag: interrupt type, should be:
 * 					- TIM_MR0_INT	:Interrupt for Match channel 0
 * 					- TIM_MR1_INT	:Interrupt for Match channel 1
 * 					- TIM_MR2_INT	:Interrupt for Match channel 2
 * 					- TIM_MR3_INT	:Interrupt for Match channel 3
 * 					- TIM_CR0_INT	:Interrupt for Capture channel 0
 * 					- TIM_CR1_INT	:Interrupt for Capture channel 1
 * @return 		FlagStatus
 * 					- SET 	:interrupt
 * 					- RESET :no interrupt
 **********************************************************************/
FlagStatus TIM_GetIntStatus(LPC_TIMERn_Type *TIMx, TIM_INT_TYPE IntFlag)
{
	uint8_t temp;
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_INT_TYPE(IntFlag));
	temp = (TIMx->IR)& TIM_IR_CLR(IntFlag);
	if (temp)
		return SET;

	return RESET;

}
开发者ID:NeuronRobotics，项目名称:microcontroller-sample，代码行数:30，代码来源:lpc43xx_timer.c

示例11: TIM_GetCaptureValue

/*********************************************************************//**
 * @brief 		Read value of capture register in timer/counter device
 * @param[in]	TIMx Pointer to timer/counter device, should be:
 * 					- LPC_TIM0	:TIMER0 peripheral
 * 					- LPC_TIM1	:TIMER1 peripheral
 * 					- LPC_TIM2	:TIMER2 peripheral
 * 					- LPC_TIM3	:TIMER3 peripheral
 * @param[in]	CaptureChannel: capture channel number, should be:
 * 				- TIM_COUNTER_INCAP0: CAPn.0 input pin for TIMERn
 * 				- TIM_COUNTER_INCAP1: CAPn.1 input pin for TIMERn
 * 				- TIM_COUNTER_INCAP1: CAPn.2 input pin for TIMERn
 * 				- TIM_COUNTER_INCAP1: CAPn.3 input pin for TIMERn
 * @return 		Value of capture register
 **********************************************************************/
uint32_t TIM_GetCaptureValue(LPC_TIMERn_Type *TIMx, TIM_COUNTER_INPUT_OPT CaptureChannel)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_COUNTER_INPUT_OPT(CaptureChannel));

	switch(CaptureChannel){
		case 0: return TIMx->CR[0];
		case 1:	return TIMx->CR[1];
		case 2:	return TIMx->CR[2];
		case 3:	return TIMx->CR[3];
	}
	return 0;
}
开发者ID:NeuronRobotics，项目名称:microcontroller-sample，代码行数:27，代码来源:lpc43xx_timer.c

示例12: TIM_GetCaptureValue

/*********************************************************************//**
 * @brief 		Read value of capture register in timer/counter device
 * @param[in]	TIMx Pointer to timer/counter device, can be LPC_TMR16B0,
 *                   LPC_TMR16B1, LPC_TMR32B0, LPC_TMR32B1 
 * @return 		Value of capture register
 **********************************************************************/
uint32_t TIM_GetCaptureValue(TMR_TypeDef *TIMx)
{
    uint32_t val;
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_COUNTER_INPUT_OPT(CaptureChannel));
    
    val = TIMx->CR0;
	if((TIMx == LPC_TMR16B0) || (TIMx == LPC_TMR16B1)) {
        val &= 0xFFFF;                
    } 

    return val;
}
开发者ID:inf3ct3d，项目名称:fmtr，代码行数:19，代码来源:lpc11xx_tmr.c

示例13: TIM_ConfigMatch

/*********************************************************************//**
 * @brief 		Configuration for Match register
 * @param[in]	TIMx Pointer to timer device
 * @param[in]   TIM_MatchConfigStruct Pointer to TIM_MATCHCFG_Type
 * 					- MatchChannel : choose channel 0 or 1
 * 					- IntOnMatch	 : if SET, interrupt will be generated when MRxx match
 * 									the value in TC
 * 					- StopOnMatch	 : if SET, TC and PC will be stopped whenM Rxx match
 * 									the value in TC
 * 					- ResetOnMatch : if SET, Reset on MR0 when MRxx match
 * 									the value in TC
 * 					-ExtMatchOutputType: Select output for external match
 * 						 +	 0:	Do nothing for external output pin if match
 *						 +   1:	Force external output pin to low if match
 *						 + 	 2: Force external output pin to high if match
 *						 + 	 3: Toggle external output pin if match
 *					MatchValue: Set the value to be compared with TC value
 * @return 		None
 **********************************************************************/
void TIM_ConfigMatch(TIM_TypeDef *TIMx, TIM_MATCHCFG_Type *TIM_MatchConfigStruct)
{
	CHECK_PARAM(PARAM_TIMx(TIMx));
	CHECK_PARAM(PARAM_TIM_EXTMATCH_OPT(TIM_MatchConfigStruct->ExtMatchOutputType));
	uint32_t timer = TIM_ConverPtrToTimeNum(TIMx) ;
	//	TIMx->MR[TIM_MatchConfigStruct->MatchChannel] = TIM_MatchConfigStruct->MatchValue;
	switch(TIM_MatchConfigStruct->MatchChannel)
	{
	case 0:
		TIMx->MR0 = TIM_MatchConfigStruct->MatchValue;
		break;
	case 1:
		TIMx->MR1 = TIM_MatchConfigStruct->MatchValue;
		break;
	}
	//interrupt on MRn
	TIMx->MCR &=~TIM_MCR_CHANNEL_MASKBIT(TIM_MatchConfigStruct->MatchChannel);

	if (TIM_MatchConfigStruct->IntOnMatch)
		TIMx->MCR |= TIM_INT_ON_MATCH(TIM_MatchConfigStruct->MatchChannel);

	//reset on MRn
	if (TIM_MatchConfigStruct->ResetOnMatch)
		TIMx->MCR |= TIM_RESET_ON_MATCH(TIM_MatchConfigStruct->MatchChannel);

	//stop on MRn
	if (TIM_MatchConfigStruct->StopOnMatch)
		TIMx->MCR |= TIM_STOP_ON_MATCH(TIM_MatchConfigStruct->MatchChannel);

	// match output type

	TIMx->EMR 	&= ~TIM_EM_MASK(TIM_MatchConfigStruct->MatchChannel);
	TIMx->EMR    = TIM_EM_SET(TIM_MatchConfigStruct->MatchChannel,TIM_MatchConfigStruct->ExtMatchOutputType);

		//pin output configuration
		if (TIM_MatchConfigStruct->ExtMatchOutputType >0)
		{
			if ((timer <2)&& (TIM_MatchConfigStruct->MatchChannel < 2))
			{
				PINSEL_ConfigPin((PINSEL_CFG_Type *)&timer_match_pin[2*timer +TIM_MatchConfigStruct->MatchChannel]);
			}
			if ((timer ==2))
			{
				PINSEL_ConfigPin( (PINSEL_CFG_Type *)&timer_match_pin[2*timer + TIM_MatchConfigStruct->MatchChannel]);
			}
			if ((timer ==3)&&(TIM_MatchConfigStruct->MatchChannel < 2))
			{
				PINSEL_ConfigPin( (PINSEL_CFG_Type *)&timer_match_pin[4*timer + TIM_MatchConfigStruct->MatchChannel]);
			}
		}
}
开发者ID:devemouse，项目名称:glcd，代码行数:70，代码来源:lpc17xx_timer.c

示例14: TIM_ConfigCapture

/*********************************************************************//**
 * @brief 		Configuration for Capture register
 * @param[in]	TIMx Pointer to timer device, should be:
 *   			- LPC_TIM0: TIMER0 peripheral
 * 				- LPC_TIM1: TIMER1 peripheral
 * 				- LPC_TIM2: TIMER2 peripheral
 * 				- LPC_TIM3: TIMER3 peripheral
 * 					- CaptureChannel: set the channel to capture data
 * 					- RisingEdge    : if SET, Capture at rising edge
 * 					- FallingEdge	: if SET, Capture at falling edge
 * 					- IntOnCaption  : if SET, Capture generate interrupt
 * @param[in]   TIM_CaptureConfigStruct	Pointer to TIM_CAPTURECFG_Type
 * @return 		None
 **********************************************************************/
void TIM_ConfigCapture(LPC_TIM_TypeDef *TIMx, TIM_CAPTURECFG_Type *TIM_CaptureConfigStruct)
{

	CHECK_PARAM(PARAM_TIMx(TIMx));
	TIMx->CCR &= ~TIM_CCR_CHANNEL_MASKBIT(TIM_CaptureConfigStruct->CaptureChannel);

	if (TIM_CaptureConfigStruct->RisingEdge)
		TIMx->CCR |= TIM_CAP_RISING(TIM_CaptureConfigStruct->CaptureChannel);

	if (TIM_CaptureConfigStruct->FallingEdge)
		TIMx->CCR |= TIM_CAP_FALLING(TIM_CaptureConfigStruct->CaptureChannel);

	if (TIM_CaptureConfigStruct->IntOnCaption)
		TIMx->CCR |= TIM_INT_ON_CAP(TIM_CaptureConfigStruct->CaptureChannel);
}
开发者ID:zhuhuijia0001，项目名称:eload，代码行数:29，代码来源:lpc17xx_timer.c

示例15: TIM_CapturePins

/*********************************************************************//**
 * @brief 		Assign Capture Signals
 *                - CT16B0_CAP0 : PIO0_2
 *                - CT16B1_CAP0 : PIO1_8
 *                - CT32B0_CAP0 : PIO1_5
 *                - CT32B1_CAP0 : PIO1_0
 * @param[in]	TIMx Pointer to timer/counter device, can be LPC_TMR16B0,
 *                   LPC_TMR16B1, LPC_TMR32B0, LPC_TMR32B1 
 * @return 		None
 **********************************************************************/
void TIM_CapturePins(TMR_TypeDef *TIMx)
{
    CHECK_PARAM(PARAM_TIMx(TIMx));

    if        (TIMx == LPC_TMR16B0) {  /** CT16B0_CAP0 */
        IOCON_SetPinFunc(IOCON_PIO0_2, PIO0_2_FUN_CT16B0_CAP0);

    } else if (TIMx == LPC_TMR16B1) {  /** CT16B1_CAP0 */
        IOCON_SetPinFunc(IOCON_PIO1_8, PIO1_8_FUN_CT16B1_CAP0);
            
    } else if (TIMx == LPC_TMR32B0) {  /** CT32B0_CAP0 */
        IOCON_SetPinFunc(IOCON_PIO1_5, PIO1_5_FUN_CT32B0_CAP0); 
               
    } else if (TIMx == LPC_TMR32B1) {  /** CT32B1_CAP0 */
        IOCON_SetPinFunc(IOCON_PIO1_0, PIO1_0_FUN_CT32B1_CAP0);        
    }
}
开发者ID:inf3ct3d，项目名称:fmtr，代码行数:27，代码来源:lpc11xx_tmr.c


注：本文中的PARAM_TIMx函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。