当前位置: 首页>>代码示例>>C++>>正文

C++ PARAM_RTCx函数代码示例

本文整理汇总了C++中PARAM_RTCx函数的典型用法代码示例。如果您正苦于以下问题：C++ PARAM_RTCx函数的具体用法？C++ PARAM_RTCx怎么用？C++ PARAM_RTCx使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了PARAM_RTCx函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: RTC_GetTime

/*********************************************************************//**
 * @brief 		Get current time value for each type time type
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	Timetype Time Type, should be:
 * 					- RTC_TIMETYPE_SECOND
 * 					- RTC_TIMETYPE_MINUTE
 * 					- RTC_TIMETYPE_HOUR
 * 					- RTC_TIMETYPE_DAYOFWEEK
 * 					- RTC_TIMETYPE_DAYOFMONTH
 * 					- RTC_TIMETYPE_DAYOFYEAR
 * 					- RTC_TIMETYPE_MONTH
 * 					- RTC_TIMETYPE_YEAR
 * @return 		Value of time according to specified time type
 **********************************************************************/
uint32_t RTC_GetTime(LPC_RTC_Type *RTCx, uint32_t Timetype)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_TIMETYPE(Timetype));

	switch (Timetype)
	{
	case RTC_TIMETYPE_SECOND:
		return (RTCx->SEC & RTC_SEC_MASK);
	case RTC_TIMETYPE_MINUTE:
		return (RTCx->MIN & RTC_MIN_MASK);
	case RTC_TIMETYPE_HOUR:
		return (RTCx->HRS & RTC_HOUR_MASK);
	case RTC_TIMETYPE_DAYOFWEEK:
		return (RTCx->DOW & RTC_DOW_MASK);
	case RTC_TIMETYPE_DAYOFMONTH:
		return (RTCx->DOM & RTC_DOM_MASK);
	case RTC_TIMETYPE_DAYOFYEAR:
		return (RTCx->DOY & RTC_DOY_MASK);
	case RTC_TIMETYPE_MONTH:
		return (RTCx->MONTH & RTC_MONTH_MASK);
	case RTC_TIMETYPE_YEAR:
		return (RTCx->YEAR & RTC_YEAR_MASK);
	default:
		return (0);
	}
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:41，代码来源:lpc18xx_rtc.c

示例2: RTC_Init

/********************************************************************//**
 * @brief		Initializes the RTC peripheral.
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @return 		None
 *********************************************************************/
void RTC_Init (LPC_RTC_Type *RTCx)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));

	// Configure clock to RTC
	LPC_CREG->CREG0 &= ~((1<<3)|(1<<2));					// Reset 32Khz oscillator
	LPC_CREG->CREG0 |= (1<<1)|(1<<0);						// Enable 32 kHz & 1 kHz on osc32k and release reset
	LPC_SCU->SFSCLK_0 = 1 | (0x3<<2);						// function 1; CGU clk out, pull down
	LPC_CGU->BASE_OUT_CLK = (CGU_CLKSRC_32KHZ_OSC<<24) |(1<<11);		// base clock out use 32KHz crystal and auto block
	do
	{
		/* Reset RTC clock*/
		RTCx->CCR = RTC_CCR_CTCRST | RTC_CCR_CCALEN;
	}
	while(RTCx->CCR!=(RTC_CCR_CTCRST | RTC_CCR_CCALEN));
	do
	{
		/* Finish resetting RTC clock*/
		RTCx->CCR = RTC_CCR_CCALEN;
	}
	while(RTCx->CCR != RTC_CCR_CCALEN);
	/* Clear counter increment and alarm interrupt */
	RTCx->ILR = RTC_IRL_RTCCIF | RTC_IRL_RTCALF;
	while(RTCx->ILR!=0);
	// Clear all register to be default
	RTCx->CIIR = 0x00;
	RTCx->AMR = 0xFF;
	RTCx->CALIBRATION = 0x00;
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:34，代码来源:lpc18xx_rtc.c

示例3: RTC_ResetClockTickCounter

/*********************************************************************//**
 * @brief 		Reset clock tick counter in RTC peripheral
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @return 		None
 **********************************************************************/
void RTC_ResetClockTickCounter(LPC_RTC_Type *RTCx)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));

	RTCx->CCR |= RTC_CCR_CTCRST;
	RTCx->CCR &= (~RTC_CCR_CTCRST) & RTC_CCR_BITMASK;
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:12，代码来源:lpc18xx_rtc.c

示例4: RTC_ClearIntPending

/*********************************************************************//**
 * @brief 		Clear specified Location interrupt pending in
 * 				RTC peripheral
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	IntType Interrupt location type, should be:
 * 					- RTC_INT_COUNTER_INCREASE	:Clear Counter Increment Interrupt pending.
 * 					- RTC_INT_ALARM				:Clear alarm interrupt pending
 * @return 		None
 **********************************************************************/
void RTC_ClearIntPending (LPC_RTC_Type *RTCx, uint32_t IntType)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_INT(IntType));

	RTCx->ILR = IntType;
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:16，代码来源:lpc18xx_rtc.c

示例5: RTC_GetIntPending

/*********************************************************************//**
 * @brief 		Check whether if specified Location interrupt in
 * 				RTC peripheral is set or not
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	IntType Interrupt location type, should be:
 * 					- RTC_INT_COUNTER_INCREASE: Counter Increment Interrupt block generated an interrupt.
 * 					- RTC_INT_ALARM: Alarm generated an interrupt.
 * @return 		New state of specified Location interrupt in RTC peripheral
 * 					- SET
 * 					- RESET
 **********************************************************************/
IntStatus RTC_GetIntPending (LPC_RTC_Type *RTCx, uint32_t IntType)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_INT(IntType));

	return ((RTCx->ILR & IntType) ? SET : RESET);
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:18，代码来源:lpc18xx_rtc.c

示例6: RTC_ReadGPREG

/*********************************************************************//**
 * @brief 		Read value from General purpose registers
 * @param[in]	RTCx	RTC peripheral selected, should be RTC
 * @param[in]	Channel General purpose registers Channel number,
 * 				should be in range from 0 to 4.
 * @return 		Read Value
 * Note: These General purpose registers can be used to store important
 * information when the main power supply is off. The value in these
 * registers is not affected by chip reset.
 **********************************************************************/
uint32_t RTC_ReadGPREG (RTC_TypeDef *RTCx, uint8_t Channel)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_GPREG_CH(Channel));

	/* FIXME return RTCx->GPREGn[Channel]; */
}
开发者ID:m3y54m，项目名称:32bitmicro，代码行数:17，代码来源:lpc17xx_rtc.c

示例7: RTC_WriteGPREG

/*********************************************************************//**
 * @brief 		Write value to General purpose registers
 * @param[in]	RTCx	RTC peripheral selected, should be RTC
 * @param[in]	Channel General purpose registers Channel number,
 * 				should be in range from 0 to 4.
 * @param[in]	Value Value to write
 * @return 		None
 * Note: These General purpose registers can be used to store important
 * information when the main power supply is off. The value in these
 * registers is not affected by chip reset.
 **********************************************************************/
void RTC_WriteGPREG (RTC_TypeDef *RTCx, uint8_t Channel, uint32_t Value)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_GPREG_CH(Channel));

	/* FIXME RTCx->GPREGn[Channel] = Value; */
}
开发者ID:m3y54m，项目名称:32bitmicro，代码行数:18，代码来源:lpc17xx_rtc.c

示例8: RTC_SetTime

/*********************************************************************//**
 * @brief 		Set current time value for each time type in RTC peripheral
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	Timetype Time Type, should be:
 * 					- RTC_TIMETYPE_SECOND
 * 					- RTC_TIMETYPE_MINUTE
 * 					- RTC_TIMETYPE_HOUR
 * 					- RTC_TIMETYPE_DAYOFWEEK
 * 					- RTC_TIMETYPE_DAYOFMONTH
 * 					- RTC_TIMETYPE_DAYOFYEAR
 * 					- RTC_TIMETYPE_MONTH
 * 					- RTC_TIMETYPE_YEAR
 * @param[in]	TimeValue Time value to set
 * @return 		None
 **********************************************************************/
void RTC_SetTime (LPC_RTC_Type *RTCx, uint32_t Timetype, uint32_t TimeValue)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_TIMETYPE(Timetype));

	switch ( Timetype)
	{
	case RTC_TIMETYPE_SECOND:
		CHECK_PARAM(TimeValue <= RTC_SECOND_MAX);

		RTCx->SEC = TimeValue & RTC_SEC_MASK;
		break;

	case RTC_TIMETYPE_MINUTE:
		CHECK_PARAM(TimeValue <= RTC_MINUTE_MAX);

		RTCx->MIN = TimeValue & RTC_MIN_MASK;
		break;

	case RTC_TIMETYPE_HOUR:
		CHECK_PARAM(TimeValue <= RTC_HOUR_MAX);

		RTCx->HRS = TimeValue & RTC_HOUR_MASK;
		break;

	case RTC_TIMETYPE_DAYOFWEEK:
		CHECK_PARAM(TimeValue <= RTC_DAYOFWEEK_MAX);

		RTCx->DOW = TimeValue & RTC_DOW_MASK;
		break;

	case RTC_TIMETYPE_DAYOFMONTH:
		CHECK_PARAM((TimeValue <= RTC_DAYOFMONTH_MAX) \
				&& (TimeValue >= RTC_DAYOFMONTH_MIN));

		RTCx->DOM = TimeValue & RTC_DOM_MASK;
		break;

	case RTC_TIMETYPE_DAYOFYEAR:
		CHECK_PARAM((TimeValue >= RTC_DAYOFYEAR_MIN) \
				&& (TimeValue <= RTC_DAYOFYEAR_MAX));

		RTCx->DOY = TimeValue & RTC_DOY_MASK;
		break;

	case RTC_TIMETYPE_MONTH:
		CHECK_PARAM((TimeValue >= RTC_MONTH_MIN) \
				&& (TimeValue <= RTC_MONTH_MAX));

		RTCx->MONTH = TimeValue & RTC_MONTH_MASK;
		break;

	case RTC_TIMETYPE_YEAR:
		CHECK_PARAM(TimeValue <= RTC_YEAR_MAX);

		RTCx->YEAR = TimeValue & RTC_YEAR_MASK;
		break;
	}
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:74，代码来源:lpc18xx_rtc.c

示例9: RTC_DeInit

/*********************************************************************//**
 * @brief		De-initializes the RTC peripheral registers to their
*                  default reset values.
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @return 		None
 **********************************************************************/
void RTC_DeInit(LPC_RTC_TypeDef *RTCx)
{
    CHECK_PARAM(PARAM_RTCx(RTCx));

    RTCx->CCR = 0x00;
    // Disable power and clock for RTC module
    CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCRTC, DISABLE);
}
开发者ID:benemorius，项目名称:openOBC-devboard，代码行数:14，代码来源:lpc17xx_rtc.c

示例10: RTC_SetAlarmTime

/*********************************************************************//**
 * @brief 		Set alarm time value for each time type
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	Timetype Time Type, should be:
 * 					- RTC_TIMETYPE_SECOND
 * 					- RTC_TIMETYPE_MINUTE
 * 					- RTC_TIMETYPE_HOUR
 * 					- RTC_TIMETYPE_DAYOFWEEK
 * 					- RTC_TIMETYPE_DAYOFMONTH
 * 					- RTC_TIMETYPE_DAYOFYEAR
 * 					- RTC_TIMETYPE_MONTH
 * 					- RTC_TIMETYPE_YEAR
 * @param[in]	ALValue Alarm time value to set
 * @return 		None
 **********************************************************************/
void RTC_SetAlarmTime (LPC_RTC_Type *RTCx, uint32_t Timetype, uint32_t ALValue)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));

	switch (Timetype)
	{
	case RTC_TIMETYPE_SECOND:
		CHECK_PARAM(ALValue <= RTC_SECOND_MAX);

		RTCx->ASEC = ALValue & RTC_SEC_MASK;
		break;

	case RTC_TIMETYPE_MINUTE:
		CHECK_PARAM(ALValue <= RTC_MINUTE_MAX);

		RTCx->AMIN = ALValue & RTC_MIN_MASK;
		break;

	case RTC_TIMETYPE_HOUR:
		CHECK_PARAM(ALValue <= RTC_HOUR_MAX);

		RTCx->AHRS = ALValue & RTC_HOUR_MASK;
		break;

	case RTC_TIMETYPE_DAYOFWEEK:
		CHECK_PARAM(ALValue <= RTC_DAYOFWEEK_MAX);

		RTCx->ADOW = ALValue & RTC_DOW_MASK;
		break;

	case RTC_TIMETYPE_DAYOFMONTH:
		CHECK_PARAM((ALValue <= RTC_DAYOFMONTH_MAX) \
				&& (ALValue >= RTC_DAYOFMONTH_MIN));

		RTCx->ADOM = ALValue & RTC_DOM_MASK;
		break;

	case RTC_TIMETYPE_DAYOFYEAR:
		CHECK_PARAM((ALValue >= RTC_DAYOFYEAR_MIN) \
				&& (ALValue <= RTC_DAYOFYEAR_MAX));

		RTCx->ADOY = ALValue & RTC_DOY_MASK;
		break;

	case RTC_TIMETYPE_MONTH:
		CHECK_PARAM((ALValue >= RTC_MONTH_MIN) \
				&& (ALValue <= RTC_MONTH_MAX));

		RTCx->AMON = ALValue & RTC_MONTH_MASK;
		break;

	case RTC_TIMETYPE_YEAR:
		CHECK_PARAM(ALValue <= RTC_YEAR_MAX);

		RTCx->AYRS = ALValue & RTC_YEAR_MASK;
		break;
	}
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:73，代码来源:lpc18xx_rtc.c

示例11: RTC_SetAlarmTime

/*********************************************************************//**
 * @brief 		Set alarm time value for each time type
 * @param[in]	RTCx	RTC peripheral selected, should be RTC
 * @param[in]	Timetype: Time Type, should be:
 * 				- RTC_TIMETYPE_SECOND
 * 				- RTC_TIMETYPE_MINUTE
 * 				- RTC_TIMETYPE_HOUR
 * 				- RTC_TIMETYPE_DAYOFWEEK
 * 				- RTC_TIMETYPE_DAYOFMONTH
 * 				- RTC_TIMETYPE_DAYOFYEAR
 * 				- RTC_TIMETYPE_MONTH
 * 				- RTC_TIMETYPE_YEAR
 * @param[in]	ALValue Alarm time value to set
 * @return 		None
 **********************************************************************/
void RTC_SetAlarmTime (RTC_TypeDef *RTCx, uint32_t Timetype, uint32_t ALValue)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));

	switch (Timetype)
	{
	case RTC_TIMETYPE_SECOND:
		CHECK_PARAM(ALValue < RTC_SECOND_MAX);

		RTCx->ALSEC = ALValue & RTC_SEC_MASK;
		break;

	case RTC_TIMETYPE_MINUTE:
		CHECK_PARAM(ALValue < RTC_MINUTE_MAX);

		RTCx->ALMIN = ALValue & RTC_MIN_MASK;
		break;

	case RTC_TIMETYPE_HOUR:
		CHECK_PARAM(ALValue < RTC_HOUR_MAX);

		RTCx->ALHOUR = ALValue & RTC_HOUR_MASK;
		break;

	case RTC_TIMETYPE_DAYOFWEEK:
		CHECK_PARAM(ALValue < RTC_DAYOFWEEK_MAX);

		RTCx->ALDOW = ALValue & RTC_DOW_MASK;
		break;

	case RTC_TIMETYPE_DAYOFMONTH:
		CHECK_PARAM((ALValue < RTC_DAYOFMONTH_MAX) \
				&& (ALValue > RTC_DAYOFMONTH_MIN));

		RTCx->ALDOM = ALValue & RTC_DOM_MASK;
		break;

	case RTC_TIMETYPE_DAYOFYEAR:
		CHECK_PARAM((ALValue > RTC_DAYOFYEAR_MIN) \
				&& (ALValue < RTC_DAYOFYEAR_MAX));

		RTCx->ALDOY = ALValue & RTC_DOY_MASK;
		break;

	case RTC_TIMETYPE_MONTH:
		CHECK_PARAM((ALValue > RTC_MONTH_MIN) \
				&& (ALValue < RTC_MONTH_MAX));

		RTCx->ALMON = ALValue & RTC_MONTH_MASK;		/* FIXME RTCx->ALMONTH = ALValue & RTC_MONTH_MASK; */
		break;

	case RTC_TIMETYPE_YEAR:
		CHECK_PARAM(ALValue < RTC_YEAR_MAX);

		RTCx->ALYEAR = ALValue & RTC_YEAR_MASK;
		break;
	}
}
开发者ID:m3y54m，项目名称:32bitmicro，代码行数:73，代码来源:lpc17xx_rtc.c

示例12: RTC_CalibConfig

/*********************************************************************//**
 * @brief 		Configures Calibration in RTC peripheral
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	CalibValue Calibration value, should be in range from
 * 					0 to 131,072
 * @param[in]	CalibDir Calibration Direction, should be:
 * 					- RTC_CALIB_DIR_FORWARD		:Forward calibration
 * 					- RTC_CALIB_DIR_BACKWARD	:Backward calibration
 * @return 		None
 **********************************************************************/
void RTC_CalibConfig(LPC_RTC_Type *RTCx, uint32_t CalibValue, uint8_t CalibDir)
{
	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_CALIB_DIR(CalibDir));
	CHECK_PARAM(CalibValue < RTC_CALIBRATION_MAX);

	RTCx->CALIBRATION = ((CalibValue - 1) & RTC_CALIBRATION_CALVAL_MASK) \
			| ((CalibDir == RTC_CALIB_DIR_BACKWARD) ? RTC_CALIBRATION_LIBDIR : 0);
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:19，代码来源:lpc18xx_rtc.c

示例13: RTC_WriteGPREG

/*********************************************************************//**
 * @brief 		Write value to General purpose registers
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	Channel General purpose registers Channel number,
 * 				should be in range from 0 to 4.
 * @param[in]	Value Value to write
 * @return 		None
 * Note: These General purpose registers can be used to store important
 * information when the main power supply is off. The value in these
 * registers is not affected by chip reset.
 **********************************************************************/
void RTC_WriteGPREG (LPC_RTC_TypeDef *RTCx, uint8_t Channel, uint32_t Value)
{
	volatile uint32_t *preg;

	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_GPREG_CH(Channel));

	preg = (volatile uint32_t *)&RTCx->GPREG0;
	preg += Channel;
	*preg = Value;
}
开发者ID:0x23，项目名称:Smoothieware，代码行数:22，代码来源:lpc17xx_rtc.c

示例14: RTC_WriteGPREG

/*********************************************************************//**
 * @brief 		Write value to General purpose registers
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	Channel General purpose registers Channel number,
 * 				should be in range from 0 to 63.
 * @param[in]	Value Value to write
 * @return 		None
 * Note: These General purpose registers can be used to store important
 * information when the main power supply is off. The value in these
 * registers is not affected by chip reset.
 **********************************************************************/
void RTC_WriteGPREG (LPC_RTC_Type *RTCx, uint8_t Channel, uint32_t Value)
{
	uint32_t *preg;

	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_RTC_GPREG_CH(Channel));

	preg = (uint32_t *)RTC_GPREG_BASE;
	preg += Channel;
	*preg = Value;
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:22，代码来源:lpc18xx_rtc.c

示例15: RTC_AlarmIntConfig

/*********************************************************************//**
 * @brief 		Enable/Disable Alarm interrupt for each time type
 * 				in RTC peripheral
 * @param[in]	RTCx	RTC peripheral selected, should be LPC_RTC
 * @param[in]	AlarmTimeType: Alarm Time Interrupt type,
 * 				an matching of this type value below with current time
 * 				in RTC will generates an interrupt, should be:
 * 					- RTC_TIMETYPE_SECOND
 * 					- RTC_TIMETYPE_MINUTE
 * 					- RTC_TIMETYPE_HOUR
 * 					- RTC_TIMETYPE_DAYOFWEEK
 * 					- RTC_TIMETYPE_DAYOFMONTH
 * 					- RTC_TIMETYPE_DAYOFYEAR
 * 					- RTC_TIMETYPE_MONTH
 * 					- RTC_TIMETYPE_YEAR
 * @param[in]	NewState New State of this function, should be:
 * 					- ENABLE: Alarm interrupt for this time type are enabled
 * 					- DISABLE: Alarm interrupt for this time type are disabled
 * @return 		None
 **********************************************************************/
void RTC_AlarmIntConfig (LPC_RTC_Type *RTCx, uint32_t AlarmTimeType, \
								FunctionalState NewState)
{
	uint32_t tem;

	CHECK_PARAM(PARAM_RTCx(RTCx));
	CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
	CHECK_PARAM(PARAM_RTC_TIMETYPE(AlarmTimeType));

	switch (AlarmTimeType)
	{
	case RTC_TIMETYPE_SECOND:
		tem = (RTC_AMR_AMRSEC);
		break;
	case RTC_TIMETYPE_MINUTE:
		tem = (RTC_AMR_AMRMIN);
		break;
	case RTC_TIMETYPE_HOUR:
		tem = (RTC_AMR_AMRHOUR);
		break;
	case RTC_TIMETYPE_DAYOFWEEK:
		tem = (RTC_AMR_AMRDOW);
		break;
	case RTC_TIMETYPE_DAYOFMONTH:
		tem = (RTC_AMR_AMRDOM);
		break;
	case RTC_TIMETYPE_DAYOFYEAR:
		tem = (RTC_AMR_AMRDOY);
		break;
	case RTC_TIMETYPE_MONTH:
		tem = (RTC_AMR_AMRMON);
		break;
	case RTC_TIMETYPE_YEAR:
		tem = (RTC_AMR_AMRYEAR);
		break;
	}
	if (NewState == ENABLE)
	{
		//do
		{
			RTCx->AMR &= (~tem) & RTC_AMR_BITMASK;
		}
		//while(RTCx->AMR & tem);
	}
	else
	{
		//do
		{
			RTCx->AMR |= (tem);
		}
		//while((RTCx->AMR & tem)== 0);
	}
}
开发者ID:AlexShiLucky，项目名称:freertos，代码行数:73，代码来源:lpc18xx_rtc.c


注：本文中的PARAM_RTCx函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。