本文整理汇总了C++中P54P_WRITE函数的典型用法代码示例。如果您正苦于以下问题：C++ P54P_WRITE函数的具体用法？C++ P54P_WRITE怎么用？C++ P54P_WRITE使用的例子？那么, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了P54P_WRITE函数的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: p54p_open
static int p54p_open(struct ieee80211_hw *dev)
{
struct p54p_priv *priv = dev->priv;
int err;
init_completion(&priv->boot_comp);
err = request_irq(priv->pdev->irq, p54p_interrupt,
IRQF_SHARED, "p54pci", dev);
if (err) {
dev_err(&priv->pdev->dev, "failed to register IRQ handler\n");
return err;
}
memset(priv->ring_control, 0, sizeof(*priv->ring_control));
err = p54p_upload_firmware(dev);
if (err) {
free_irq(priv->pdev->irq, dev);
return err;
}
priv->rx_idx_data = priv->tx_idx_data = 0;
priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0;
p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data,
ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data);
p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt,
ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt);
P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma));
P54P_READ(ring_control_base);
wmb();
udelay(10);
P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
P54P_READ(int_enable);
wmb();
udelay(10);
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
P54P_READ(dev_int);
if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
printk(KERN_ERR "%s: Cannot boot firmware!\n",
wiphy_name(dev->wiphy));
p54p_stop(dev);
return -ETIMEDOUT;
}
P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
P54P_READ(int_enable);
wmb();
udelay(10);
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
P54P_READ(dev_int);
wmb();
udelay(10);
return 0;
}示例2: p54p_tx
static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct p54p_priv *priv = dev->priv;
struct p54p_ring_control *ring_control = priv->ring_control;
unsigned long flags;
struct p54p_desc *desc;
dma_addr_t mapping;
u32 device_idx, idx, i;
spin_lock_irqsave(&priv->lock, flags);
device_idx = le32_to_cpu(ring_control->device_idx[1]);
idx = le32_to_cpu(ring_control->host_idx[1]);
i = idx % ARRAY_SIZE(ring_control->tx_data);
priv->tx_buf_data[i] = skb;
mapping = pci_map_single(priv->pdev, skb->data, skb->len,
PCI_DMA_TODEVICE);
desc = &ring_control->tx_data[i];
desc->host_addr = cpu_to_le32(mapping);
desc->device_addr = ((struct p54_hdr *)skb->data)->req_id;
desc->len = cpu_to_le16(skb->len);
desc->flags = 0;
wmb();
ring_control->host_idx[1] = cpu_to_le32(idx + 1);
spin_unlock_irqrestore(&priv->lock, flags);
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
P54P_READ(dev_int);
}示例3: p54p_simple_interrupt
static irqreturn_t p54p_simple_interrupt(int irq, void *dev_id)
{
struct p54p_priv *priv = (struct p54p_priv *) dev_id;
__le32 reg;
reg = P54P_READ(int_ident);
P54P_WRITE(int_ack, reg);
if (reg & P54P_READ(int_enable))
complete(&priv->boot_comp);
return IRQ_HANDLED;
}示例4: p54p_rx_tasklet
static void p54p_rx_tasklet(unsigned long dev_id)
{
struct ieee80211_hw *dev = (struct ieee80211_hw *)dev_id;
struct p54p_priv *priv = dev->priv;
struct p54p_ring_control *ring_control = priv->ring_control;
p54p_check_rx_ring(dev, &priv->rx_idx_mgmt, 2, ring_control->rx_mgmt,
ARRAY_SIZE(ring_control->rx_mgmt), priv->rx_buf_mgmt);
p54p_check_rx_ring(dev, &priv->rx_idx_data, 0, ring_control->rx_data,
ARRAY_SIZE(ring_control->rx_data), priv->rx_buf_data);
wmb();
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
}示例5: p54p_stop
static void p54p_stop(struct ieee80211_hw *dev)
{
struct p54p_priv *priv = dev->priv;
struct p54p_ring_control *ring_control = priv->ring_control;
unsigned int i;
struct p54p_desc *desc;
P54P_WRITE(int_enable, cpu_to_le32(0));
P54P_READ(int_enable);
udelay(10);
free_irq(priv->pdev->irq, dev);
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
for (i = 0; i < ARRAY_SIZE(priv->rx_buf); i++) {
desc = &ring_control->rx_data[i];
if (desc->host_addr)
pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
kfree_skb(priv->rx_buf[i]);
priv->rx_buf[i] = NULL;
}
for (i = 0; i < ARRAY_SIZE(priv->tx_buf); i++) {
desc = &ring_control->tx_data[i];
if (desc->host_addr)
pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
le16_to_cpu(desc->len), PCI_DMA_TODEVICE);
kfree(priv->tx_buf[i]);
priv->tx_buf[i] = NULL;
}
memset(ring_control, 0, sizeof(ring_control));
}示例6: p54p_interrupt
static irqreturn_t p54p_interrupt(int irq, void *dev_id)
{
struct ieee80211_hw *dev = dev_id;
struct p54p_priv *priv = dev->priv;
__le32 reg;
reg = P54P_READ(int_ident);
if (unlikely(reg == cpu_to_le32(0xFFFFFFFF))) {
goto out;
}
P54P_WRITE(int_ack, reg);
reg &= P54P_READ(int_enable);
if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE))
tasklet_schedule(&priv->tasklet);
else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))
complete(&priv->boot_comp);
out:
return reg ? IRQ_HANDLED : IRQ_NONE;
}示例7: p54p_tx
static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data,
size_t len, int free_on_tx)
{
struct p54p_priv *priv = dev->priv;
struct p54p_ring_control *ring_control = priv->ring_control;
unsigned long flags;
struct p54p_desc *desc;
dma_addr_t mapping;
u32 device_idx, idx, i;
spin_lock_irqsave(&priv->lock, flags);
device_idx = le32_to_cpu(ring_control->device_idx[1]);
idx = le32_to_cpu(ring_control->host_idx[1]);
i = idx % ARRAY_SIZE(ring_control->tx_data);
mapping = pci_map_single(priv->pdev, data, len, PCI_DMA_TODEVICE);
desc = &ring_control->tx_data[i];
desc->host_addr = cpu_to_le32(mapping);
desc->device_addr = data->req_id;
desc->len = cpu_to_le16(len);
desc->flags = 0;
wmb();
ring_control->host_idx[1] = cpu_to_le32(idx + 1);
if (free_on_tx)
priv->tx_buf[i] = data;
spin_unlock_irqrestore(&priv->lock, flags);
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
P54P_READ(dev_int);
/* FIXME: unlikely to happen because the device usually runs out of
memory before we fill the ring up, but we can make it impossible */
if (idx - device_idx > ARRAY_SIZE(ring_control->tx_data) - 2)
printk(KERN_INFO "%s: tx overflow.\n", wiphy_name(dev->wiphy));
}示例8: p54p_interrupt
static irqreturn_t p54p_interrupt(int irq, void *dev_id)
{
struct ieee80211_hw *dev = dev_id;
struct p54p_priv *priv = dev->priv;
struct p54p_ring_control *ring_control = priv->ring_control;
__le32 reg;
spin_lock(&priv->lock);
reg = P54P_READ(int_ident);
if (unlikely(reg == cpu_to_le32(0xFFFFFFFF))) {
spin_unlock(&priv->lock);
return IRQ_HANDLED;
}
P54P_WRITE(int_ack, reg);
reg &= P54P_READ(int_enable);
if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) {
p54p_check_tx_ring(dev, &priv->tx_idx_mgmt,
3, ring_control->tx_mgmt,
ARRAY_SIZE(ring_control->tx_mgmt),
priv->tx_buf_mgmt);
p54p_check_tx_ring(dev, &priv->tx_idx_data,
1, ring_control->tx_data,
ARRAY_SIZE(ring_control->tx_data),
priv->tx_buf_data);
tasklet_schedule(&priv->rx_tasklet);
} else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))
complete(&priv->boot_comp);
spin_unlock(&priv->lock);
return reg ? IRQ_HANDLED : IRQ_NONE;
}示例9: p54p_upload_firmware
static int p54p_upload_firmware(struct ieee80211_hw *dev)
{
struct p54p_priv *priv = dev->priv;
__le32 reg;
int err;
__le32 *data;
u32 remains, left, device_addr;
P54P_WRITE(int_enable, cpu_to_le32(0));
P54P_READ(int_enable);
udelay(10);
reg = P54P_READ(ctrl_stat);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT);
P54P_WRITE(ctrl_stat, reg);
P54P_READ(ctrl_stat);
udelay(10);
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET);
P54P_WRITE(ctrl_stat, reg);
wmb();
udelay(10);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
P54P_WRITE(ctrl_stat, reg);
wmb();
/* wait for the firmware to reset properly */
mdelay(10);
err = p54_parse_firmware(dev, priv->firmware);
if (err)
return err;
if (priv->common.fw_interface != FW_LM86) {
dev_err(&priv->pdev->dev, "wrong firmware, "
"please get a LM86(PCI) firmware a try again.\n");
return -EINVAL;
}
data = (__le32 *) priv->firmware->data;
remains = priv->firmware->size;
device_addr = ISL38XX_DEV_FIRMWARE_ADDR;
while (remains) {
u32 i = 0;
left = min((u32)0x1000, remains);
P54P_WRITE(direct_mem_base, cpu_to_le32(device_addr));
P54P_READ(int_enable);
device_addr += 0x1000;
while (i < left) {
P54P_WRITE(direct_mem_win[i], *data++);
i += sizeof(u32);
}
remains -= left;
P54P_READ(int_enable);
}
reg = P54P_READ(ctrl_stat);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT);
P54P_WRITE(ctrl_stat, reg);
P54P_READ(ctrl_stat);
udelay(10);
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET);
P54P_WRITE(ctrl_stat, reg);
wmb();
udelay(10);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
P54P_WRITE(ctrl_stat, reg);
wmb();
udelay(10);
/* wait for the firmware to boot properly */
mdelay(100);
return 0;
}示例10: p54p_upload_firmware
static int p54p_upload_firmware(struct ieee80211_hw *dev)
{
struct p54p_priv *priv = dev->priv;
const struct firmware *fw_entry = NULL;
__le32 reg;
int err;
__le32 *data;
u32 remains, left, device_addr;
P54P_WRITE(int_enable, cpu_to_le32(0));
P54P_READ(int_enable);
udelay(10);
reg = P54P_READ(ctrl_stat);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT);
P54P_WRITE(ctrl_stat, reg);
P54P_READ(ctrl_stat);
udelay(10);
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET);
P54P_WRITE(ctrl_stat, reg);
wmb();
udelay(10);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
P54P_WRITE(ctrl_stat, reg);
wmb();
mdelay(50);
err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev);
if (err) {
printk(KERN_ERR "%s (prism54pci): cannot find firmware "
"(isl3886)\n", pci_name(priv->pdev));
return err;
}
p54_parse_firmware(dev, fw_entry);
data = (__le32 *) fw_entry->data;
remains = fw_entry->size;
device_addr = ISL38XX_DEV_FIRMWARE_ADDR;
while (remains) {
u32 i = 0;
left = min((u32)0x1000, remains);
P54P_WRITE(direct_mem_base, cpu_to_le32(device_addr));
P54P_READ(int_enable);
device_addr += 0x1000;
while (i < left) {
P54P_WRITE(direct_mem_win[i], *data++);
i += sizeof(u32);
}
remains -= left;
P54P_READ(int_enable);
}
release_firmware(fw_entry);
reg = P54P_READ(ctrl_stat);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT);
P54P_WRITE(ctrl_stat, reg);
P54P_READ(ctrl_stat);
udelay(10);
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET);
P54P_WRITE(ctrl_stat, reg);
wmb();
udelay(10);
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
P54P_WRITE(ctrl_stat, reg);
wmb();
udelay(10);
return 0;
}示例11: p54p_interrupt
static irqreturn_t p54p_interrupt(int irq, void *dev_id)
{
struct ieee80211_hw *dev = dev_id;
struct p54p_priv *priv = dev->priv;
struct p54p_ring_control *ring_control = priv->ring_control;
__le32 reg;
spin_lock(&priv->lock);
reg = P54P_READ(int_ident);
if (unlikely(reg == cpu_to_le32(0xFFFFFFFF))) {
spin_unlock(&priv->lock);
return IRQ_HANDLED;
}
P54P_WRITE(int_ack, reg);
reg &= P54P_READ(int_enable);
if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) {
struct p54p_desc *desc;
u32 idx, i;
i = priv->tx_idx;
i %= ARRAY_SIZE(ring_control->tx_data);
priv->tx_idx = idx = le32_to_cpu(ring_control->device_idx[1]);
idx %= ARRAY_SIZE(ring_control->tx_data);
while (i != idx) {
desc = &ring_control->tx_data[i];
if (priv->tx_buf[i]) {
kfree(priv->tx_buf[i]);
priv->tx_buf[i] = NULL;
}
pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
le16_to_cpu(desc->len), PCI_DMA_TODEVICE);
desc->host_addr = 0;
desc->device_addr = 0;
desc->len = 0;
desc->flags = 0;
i++;
i %= ARRAY_SIZE(ring_control->tx_data);
}
i = priv->rx_idx;
i %= ARRAY_SIZE(ring_control->rx_data);
priv->rx_idx = idx = le32_to_cpu(ring_control->device_idx[0]);
idx %= ARRAY_SIZE(ring_control->rx_data);
while (i != idx) {
u16 len;
struct sk_buff *skb;
desc = &ring_control->rx_data[i];
len = le16_to_cpu(desc->len);
skb = priv->rx_buf[i];
skb_put(skb, len);
if (p54_rx(dev, skb)) {
pci_unmap_single(priv->pdev,
le32_to_cpu(desc->host_addr),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
priv->rx_buf[i] = NULL;
desc->host_addr = 0;
} else {
skb_trim(skb, 0);
desc->len = cpu_to_le16(MAX_RX_SIZE);
}
i++;
i %= ARRAY_SIZE(ring_control->rx_data);
}
p54p_refill_rx_ring(dev);
wmb();
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
} else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))
complete(&priv->boot_comp);
spin_unlock(&priv->lock);
return reg ? IRQ_HANDLED : IRQ_NONE;
}示例12: p54p_read_eeprom
static int p54p_read_eeprom(struct ieee80211_hw *dev)
{
struct p54p_priv *priv = dev->priv;
struct p54p_ring_control *ring_control = priv->ring_control;
int err;
struct p54_control_hdr *hdr;
void *eeprom;
dma_addr_t rx_mapping, tx_mapping;
u16 alen;
init_completion(&priv->boot_comp);
err = request_irq(priv->pdev->irq, &p54p_simple_interrupt,
IRQF_SHARED, "prism54pci", priv);
if (err) {
printk(KERN_ERR "%s (prism54pci): failed to register IRQ handler\n",
pci_name(priv->pdev));
return err;
}
eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL);
if (!eeprom) {
printk(KERN_ERR "%s (prism54pci): no memory for eeprom!\n",
pci_name(priv->pdev));
err = -ENOMEM;
goto out;
}
memset(ring_control, 0, sizeof(*ring_control));
P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma));
P54P_READ(ring_control_base);
udelay(10);
P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
P54P_READ(int_enable);
udelay(10);
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
printk(KERN_ERR "%s (prism54pci): Cannot boot firmware!\n",
pci_name(priv->pdev));
err = -EINVAL;
goto out;
}
P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
P54P_READ(int_enable);
hdr = eeprom + 0x2010;
p54_fill_eeprom_readback(hdr);
hdr->req_id = cpu_to_le32(priv->common.rx_start);
rx_mapping = pci_map_single(priv->pdev, eeprom,
0x2010, PCI_DMA_FROMDEVICE);
tx_mapping = pci_map_single(priv->pdev, (void *)hdr,
EEPROM_READBACK_LEN, PCI_DMA_TODEVICE);
ring_control->rx_mgmt[0].host_addr = cpu_to_le32(rx_mapping);
ring_control->rx_mgmt[0].len = cpu_to_le16(0x2010);
ring_control->tx_data[0].host_addr = cpu_to_le32(tx_mapping);
ring_control->tx_data[0].device_addr = hdr->req_id;
ring_control->tx_data[0].len = cpu_to_le16(EEPROM_READBACK_LEN);
ring_control->host_idx[2] = cpu_to_le32(1);
ring_control->host_idx[1] = cpu_to_le32(1);
wmb();
mdelay(100);
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ);
wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ);
pci_unmap_single(priv->pdev, tx_mapping,
EEPROM_READBACK_LEN, PCI_DMA_TODEVICE);
pci_unmap_single(priv->pdev, rx_mapping,
0x2010, PCI_DMA_FROMDEVICE);
alen = le16_to_cpu(ring_control->rx_mgmt[0].len);
if (le32_to_cpu(ring_control->device_idx[2]) != 1 ||
alen < 0x10) {
printk(KERN_ERR "%s (prism54pci): Cannot read eeprom!\n",
pci_name(priv->pdev));
err = -EINVAL;
goto out;
}
p54_parse_eeprom(dev, (u8 *)eeprom + 0x10, alen - 0x10);
out:
kfree(eeprom);
P54P_WRITE(int_enable, cpu_to_le32(0));
P54P_READ(int_enable);
udelay(10);
free_irq(priv->pdev->irq, priv);
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
return err;
}