本文整理汇总了C++中NETCONNTYPE_GROUP函数的典型用法代码示例。如果您正苦于以下问题:C++ NETCONNTYPE_GROUP函数的具体用法?C++ NETCONNTYPE_GROUP怎么用?C++ NETCONNTYPE_GROUP使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NETCONNTYPE_GROUP函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: lwip_netconn_do_close
/**
* Close a TCP pcb contained in a netconn
* Called from netconn_close
*
* @param msg the api_msg_msg pointing to the connection
*/
void
lwip_netconn_do_close(struct api_msg_msg *msg)
{
#if LWIP_TCP
/* @todo: abort running write/connect? */
if ((msg->conn->state != NETCONN_NONE) && (msg->conn->state != NETCONN_LISTEN)) {
/* this only happens for TCP netconns */
LWIP_ASSERT("NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP",
NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP);
msg->err = ERR_INPROGRESS;
} else if ((msg->conn->pcb.tcp != NULL) && (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP)) {
if ((msg->msg.sd.shut != NETCONN_SHUT_RDWR) && (msg->conn->state == NETCONN_LISTEN)) {
/* LISTEN doesn't support half shutdown */
msg->err = ERR_CONN;
} else {
if (msg->msg.sd.shut & NETCONN_SHUT_RD) {
/* Drain and delete mboxes */
netconn_drain(msg->conn);
}
LWIP_ASSERT("already writing or closing", msg->conn->current_msg == NULL &&
msg->conn->write_offset == 0);
msg->conn->state = NETCONN_CLOSE;
msg->conn->current_msg = msg;
lwip_netconn_do_close_internal(msg->conn);
/* for tcp netconns, lwip_netconn_do_close_internal ACKs the message */
return;
}
} else
#endif /* LWIP_TCP */
{
msg->err = ERR_VAL;
}
sys_sem_signal(&msg->conn->op_completed);
}
示例2: socket_bind
nsapi_error_t LWIP::socket_bind(nsapi_socket_t handle, const SocketAddress &address)
{
struct mbed_lwip_socket *s = (struct mbed_lwip_socket *)handle;
ip_addr_t ip_addr;
if (
#if LWIP_TCP
(NETCONNTYPE_GROUP(s->conn->type) == NETCONN_TCP && s->conn->pcb.tcp->local_port != 0) ||
#endif
(NETCONNTYPE_GROUP(s->conn->type) == NETCONN_UDP && s->conn->pcb.udp->local_port != 0)) {
return NSAPI_ERROR_PARAMETER;
}
nsapi_addr_t addr = address.get_addr();
if (!convert_mbed_addr_to_lwip(&ip_addr, &addr)) {
return NSAPI_ERROR_PARAMETER;
}
if (!ip_addr_isany_val(ip_addr) && !is_local_addr(&ip_addr)) {
return NSAPI_ERROR_PARAMETER;
}
err_t err = netconn_bind(s->conn, &ip_addr, address.get_port());
return err_remap(err);
}
示例3: lwip_netconn_do_delconn
/**
* Delete the pcb inside a netconn.
* Called from netconn_delete.
*
* @param msg the api_msg_msg pointing to the connection
*/
void
lwip_netconn_do_delconn(struct api_msg_msg *msg)
{
/* @todo TCP: abort running write/connect? */
if ((msg->conn->state != NETCONN_NONE) &&
(msg->conn->state != NETCONN_LISTEN) &&
(msg->conn->state != NETCONN_CONNECT)) {
/* this only happens for TCP netconns */
LWIP_ASSERT("NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP",
NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP);
msg->err = ERR_INPROGRESS;
} else {
LWIP_ASSERT("blocking connect in progress",
(msg->conn->state != NETCONN_CONNECT) || IN_NONBLOCKING_CONNECT(msg->conn));
/* Drain and delete mboxes */
netconn_drain(msg->conn);
if (msg->conn->pcb.tcp != NULL) {
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
raw_remove(msg->conn->pcb.raw);
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
msg->conn->pcb.udp->recv_arg = NULL;
udp_remove(msg->conn->pcb.udp);
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
LWIP_ASSERT("already writing or closing", msg->conn->current_msg == NULL &&
msg->conn->write_offset == 0);
msg->conn->state = NETCONN_CLOSE;
msg->msg.sd.shut = NETCONN_SHUT_RDWR;
msg->conn->current_msg = msg;
lwip_netconn_do_close_internal(msg->conn);
/* API_EVENT is called inside lwip_netconn_do_close_internal, before releasing
the application thread, so we can return at this point! */
return;
#endif /* LWIP_TCP */
default:
break;
}
msg->conn->pcb.tcp = NULL;
}
/* tcp netconns don't come here! */
/* @todo: this lets select make the socket readable and writable,
which is wrong! errfd instead? */
API_EVENT(msg->conn, NETCONN_EVT_RCVPLUS, 0);
API_EVENT(msg->conn, NETCONN_EVT_SENDPLUS, 0);
}
if (sys_sem_valid(&msg->conn->op_completed)) {
sys_sem_signal(&msg->conn->op_completed);
}
}
示例4: lwip_netconn_do_connect
/**
* Connect a pcb contained inside a netconn
* Called from netconn_connect.
*
* @param msg the api_msg_msg pointing to the connection and containing
* the IP address and port to connect to
*/
void
lwip_netconn_do_connect(struct api_msg_msg *msg)
{
if (msg->conn->pcb.tcp == NULL) {
/* This may happen when calling netconn_connect() a second time */
msg->err = ERR_CLSD;
if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP) {
/* For TCP, netconn_connect() calls tcpip_apimsg(), so signal op_completed here. */
sys_sem_signal(&msg->conn->op_completed);
return;
}
} else {
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
msg->err = raw_connect(msg->conn->pcb.raw, API_EXPR_REF(msg->msg.bc.ipaddr));
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
msg->err = udp_connect(msg->conn->pcb.udp, API_EXPR_REF(msg->msg.bc.ipaddr), msg->msg.bc.port);
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
/* Prevent connect while doing any other action. */
if (msg->conn->state != NETCONN_NONE) {
msg->err = ERR_ISCONN;
} else {
setup_tcp(msg->conn);
msg->err = tcp_connect(msg->conn->pcb.tcp, API_EXPR_REF(msg->msg.bc.ipaddr),
msg->msg.bc.port, lwip_netconn_do_connected);
if (msg->err == ERR_OK) {
u8_t non_blocking = netconn_is_nonblocking(msg->conn);
msg->conn->state = NETCONN_CONNECT;
SET_NONBLOCKING_CONNECT(msg->conn, non_blocking);
if (non_blocking) {
msg->err = ERR_INPROGRESS;
} else {
msg->conn->current_msg = msg;
/* sys_sem_signal() is called from lwip_netconn_do_connected (or err_tcp()),
* when the connection is established! */
return;
}
}
}
/* For TCP, netconn_connect() calls tcpip_apimsg(), so signal op_completed here. */
sys_sem_signal(&msg->conn->op_completed);
return;
#endif /* LWIP_TCP */
default:
LWIP_ERROR("Invalid netconn type", 0, do{ msg->err = ERR_VAL; }while(0));
break;
}
}
/* For all other protocols, netconn_connect() calls TCPIP_APIMSG(),
so use TCPIP_APIMSG_ACK() here. */
TCPIP_APIMSG_ACK(msg);
}
示例5: do_connect
/**
* Connect a pcb contained inside a netconn
* Called from netconn_connect.
*
* @param msg the api_msg_msg pointing to the connection and containing
* the IP address and port to connect to
*/
void
do_connect(struct api_msg_msg *msg)
{
if (msg->conn->pcb.tcp == NULL) {
sys_sem_signal(msg->conn->op_completed);
return;
}
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
msg->conn->err = raw_connect(msg->conn->pcb.raw, msg->msg.bc.ipaddr);
sys_sem_signal(msg->conn->op_completed);
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
msg->conn->err = udp_connect(msg->conn->pcb.udp, msg->msg.bc.ipaddr, msg->msg.bc.port);
sys_sem_signal(msg->conn->op_completed);
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
msg->conn->state = NETCONN_CONNECT;
setup_tcp(msg->conn);
msg->conn->err = tcp_connect(msg->conn->pcb.tcp, msg->msg.bc.ipaddr, msg->msg.bc.port,
do_connected);
/* sys_sem_signal() is called from do_connected (or err_tcp()),
* when the connection is established! */
break;
#endif /* LWIP_TCP */
default:
break;
}
}
示例6: lwip_netconn_do_listen
/**
* Set a TCP pcb contained in a netconn into listen mode
* Called from netconn_listen.
*
* @param msg the api_msg_msg pointing to the connection
*/
void
lwip_netconn_do_listen(struct api_msg_msg *msg)
{
if (ERR_IS_FATAL(msg->conn->last_err)) {
msg->err = msg->conn->last_err;
} else {
msg->err = ERR_CONN;
if (msg->conn->pcb.tcp != NULL) {
if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP) {
if (msg->conn->state == NETCONN_NONE) {
struct tcp_pcb* lpcb;
#if LWIP_IPV6
if ((msg->conn->flags & NETCONN_FLAG_IPV6_V6ONLY) == 0) {
#if TCP_LISTEN_BACKLOG
lpcb = tcp_listen_dual_with_backlog(msg->conn->pcb.tcp, msg->msg.lb.backlog);
#else /* TCP_LISTEN_BACKLOG */
lpcb = tcp_listen_dual(msg->conn->pcb.tcp);
#endif /* TCP_LISTEN_BACKLOG */
} else
#endif /* LWIP_IPV6 */
{
#if TCP_LISTEN_BACKLOG
lpcb = tcp_listen_with_backlog(msg->conn->pcb.tcp, msg->msg.lb.backlog);
#else /* TCP_LISTEN_BACKLOG */
lpcb = tcp_listen(msg->conn->pcb.tcp);
#endif /* TCP_LISTEN_BACKLOG */
}
if (lpcb == NULL) {
/* in this case, the old pcb is still allocated */
msg->err = ERR_MEM;
} else {
/* delete the recvmbox and allocate the acceptmbox */
if (sys_mbox_valid(&msg->conn->recvmbox)) {
/** @todo: should we drain the recvmbox here? */
sys_mbox_free(&msg->conn->recvmbox);
sys_mbox_set_invalid(&msg->conn->recvmbox);
}
msg->err = ERR_OK;
if (!sys_mbox_valid(&msg->conn->acceptmbox)) {
msg->err = sys_mbox_new(&msg->conn->acceptmbox, DEFAULT_ACCEPTMBOX_SIZE);
}
if (msg->err == ERR_OK) {
msg->conn->state = NETCONN_LISTEN;
msg->conn->pcb.tcp = lpcb;
tcp_arg(msg->conn->pcb.tcp, msg->conn);
tcp_accept(msg->conn->pcb.tcp, accept_function);
} else {
/* since the old pcb is already deallocated, free lpcb now */
tcp_close(lpcb);
msg->conn->pcb.tcp = NULL;
}
}
}
} else {
msg->err = ERR_ARG;
}
}
}
TCPIP_APIMSG_ACK(msg);
}
示例7: do_bind
/**
* Bind a pcb contained in a netconn
* Called from netconn_bind.
*
* @param msg the api_msg_msg pointing to the connection and containing
* the IP address and port to bind to
*/
void
do_bind(struct api_msg_msg *msg)
{
if (ERR_IS_FATAL(msg->conn->last_err)) {
msg->err = msg->conn->last_err;
} else {
msg->err = ERR_VAL;
if (msg->conn->pcb.tcp != NULL) {
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
msg->err = raw_bind(msg->conn->pcb.raw, msg->msg.bc.ipaddr);
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
msg->err = udp_bind(msg->conn->pcb.udp, msg->msg.bc.ipaddr, msg->msg.bc.port);
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
msg->err = tcp_bind(msg->conn->pcb.tcp, msg->msg.bc.ipaddr, msg->msg.bc.port);
break;
#endif /* LWIP_TCP */
default:
break;
}
}
}
TCPIP_APIMSG_ACK(msg);
}
示例8: do_join_leave_group
/**
* Join multicast groups for UDP netconns.
* Called from netconn_join_leave_group
*
* @param msg the api_msg_msg pointing to the connection
*/
void
do_join_leave_group(struct api_msg_msg *msg)
{
if (ERR_IS_FATAL(msg->conn->last_err)) {
msg->err = msg->conn->last_err;
} else {
if (msg->conn->pcb.tcp != NULL) {
if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_UDP) {
#if LWIP_UDP
if (msg->msg.jl.join_or_leave == NETCONN_JOIN) {
msg->err = igmp_joingroup(msg->msg.jl.netif_addr, msg->msg.jl.multiaddr);
} else {
msg->err = igmp_leavegroup(msg->msg.jl.netif_addr, msg->msg.jl.multiaddr);
}
#endif /* LWIP_UDP */
#if (LWIP_TCP || LWIP_RAW)
} else {
msg->err = ERR_VAL;
#endif /* (LWIP_TCP || LWIP_RAW) */
}
} else {
msg->err = ERR_CONN;
}
}
TCPIP_APIMSG_ACK(msg);
}
示例9: lwip_netconn_do_getaddr
/**
* Return a connection's local or remote address
* Called from netconn_getaddr
*
* @param msg the api_msg_msg pointing to the connection
*/
void
lwip_netconn_do_getaddr(struct api_msg_msg *msg)
{
if (msg->conn->pcb.ip != NULL) {
if (msg->msg.ad.local) {
ipX_addr_copy(PCB_ISIPV6(msg->conn->pcb.ip), API_EXPR_DEREF(msg->msg.ad.ipaddr),
msg->conn->pcb.ip->local_ip);
} else {
ipX_addr_copy(PCB_ISIPV6(msg->conn->pcb.ip), API_EXPR_DEREF(msg->msg.ad.ipaddr),
msg->conn->pcb.ip->remote_ip);
}
msg->err = ERR_OK;
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
if (msg->msg.ad.local) {
API_EXPR_DEREF(msg->msg.ad.port) = msg->conn->pcb.raw->protocol;
} else {
/* return an error as connecting is only a helper for upper layers */
msg->err = ERR_CONN;
}
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
if (msg->msg.ad.local) {
API_EXPR_DEREF(msg->msg.ad.port) = msg->conn->pcb.udp->local_port;
} else {
if ((msg->conn->pcb.udp->flags & UDP_FLAGS_CONNECTED) == 0) {
msg->err = ERR_CONN;
} else {
API_EXPR_DEREF(msg->msg.ad.port) = msg->conn->pcb.udp->remote_port;
}
}
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
if ((msg->msg.ad.local == 0) &&
((msg->conn->pcb.tcp->state == CLOSED) || (msg->conn->pcb.tcp->state == LISTEN))) {
/* pcb is not connected and remote name is requested */
msg->err = ERR_CONN;
} else {
API_EXPR_DEREF(msg->msg.ad.port) = (msg->msg.ad.local ? msg->conn->pcb.tcp->local_port : msg->conn->pcb.tcp->remote_port);
}
break;
#endif /* LWIP_TCP */
default:
LWIP_ASSERT("invalid netconn_type", 0);
break;
}
} else {
msg->err = ERR_CONN;
}
TCPIP_APIMSG_ACK(msg);
}
示例10: netconn_drain
/**
* Delete rcvmbox and acceptmbox of a netconn and free the left-over data in
* these mboxes
*
* @param conn the netconn to free
* @bytes_drained bytes drained from recvmbox
* @accepts_drained pending connections drained from acceptmbox
*/
static void
netconn_drain(struct netconn *conn)
{
void *mem;
#if LWIP_TCP
struct pbuf *p;
#endif /* LWIP_TCP */
/* This runs in tcpip_thread, so we don't need to lock against rx packets */
/* Delete and drain the recvmbox. */
if (sys_mbox_valid(&conn->recvmbox)) {
while (sys_mbox_tryfetch(&conn->recvmbox, &mem) != SYS_MBOX_EMPTY) {
#if LWIP_TCP
if (NETCONNTYPE_GROUP(conn->type) == NETCONN_TCP) {
if(mem != NULL) {
p = (struct pbuf*)mem;
/* pcb might be set to NULL already by err_tcp() */
if (conn->pcb.tcp != NULL) {
tcp_recved(conn->pcb.tcp, p->tot_len);
}
pbuf_free(p);
}
} else
#endif /* LWIP_TCP */
{
netbuf_delete((struct netbuf *)mem);
}
}
sys_mbox_free(&conn->recvmbox);
sys_mbox_set_invalid(&conn->recvmbox);
}
/* Delete and drain the acceptmbox. */
#if LWIP_TCP
if (sys_mbox_valid(&conn->acceptmbox)) {
while (sys_mbox_tryfetch(&conn->acceptmbox, &mem) != SYS_MBOX_EMPTY) {
struct netconn *newconn = (struct netconn *)mem;
/* Only tcp pcbs have an acceptmbox, so no need to check conn->type */
/* pcb might be set to NULL already by err_tcp() */
if (conn->pcb.tcp != NULL) {
tcp_accepted(conn->pcb.tcp);
}
/* drain recvmbox */
netconn_drain(newconn);
if (newconn->pcb.tcp != NULL) {
tcp_abort(newconn->pcb.tcp);
newconn->pcb.tcp = NULL;
}
netconn_free(newconn);
}
sys_mbox_free(&conn->acceptmbox);
sys_mbox_set_invalid(&conn->acceptmbox);
}
#endif /* LWIP_TCP */
}
示例11: do_connect
/**
* Connect a pcb contained inside a netconn
* Called from netconn_connect.
*
* @param msg the api_msg_msg pointing to the connection and containing
* the IP address and port to connect to
*/
void
do_connect(struct api_msg_msg *msg)
{
if (msg->conn->pcb.tcp == NULL) {
/* This may happen when calling netconn_connect() a second time */
msg->err = ERR_CLSD;
} else {
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
msg->err = raw_connect(msg->conn->pcb.raw, msg->msg.bc.ipaddr);
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
msg->err = udp_connect(msg->conn->pcb.udp, msg->msg.bc.ipaddr, msg->msg.bc.port);
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
/* Prevent connect while doing any other action. */
if (msg->conn->state != NETCONN_NONE) {
msg->err = ERR_ISCONN;
} else {
setup_tcp(msg->conn);
msg->err = tcp_connect(msg->conn->pcb.tcp, msg->msg.bc.ipaddr,
msg->msg.bc.port, do_connected);
if (msg->err == ERR_OK) {
u8_t non_blocking = netconn_is_nonblocking(msg->conn);
msg->conn->state = NETCONN_CONNECT;
SET_NONBLOCKING_CONNECT(msg->conn, non_blocking);
if (non_blocking) {
msg->err = ERR_WOULDBLOCK/*ERR_INPROGRESS*/;
} else {
msg->conn->current_msg = msg;
/* sys_sem_signal() is called from do_connected (or err_tcp()),
* when the connection is established! */
return;
}
}
}
break;
#endif /* LWIP_TCP */
default:
LWIP_ERROR("Invalid netconn type", 0, do{ msg->err = ERR_VAL; }while(0));
break;
}
}
sys_sem_signal(&msg->conn->op_completed);
}
示例12: do_disconnect
/**
* Connect a pcb contained inside a netconn
* Only used for UDP netconns.
* Called from netconn_disconnect.
*
* @param msg the api_msg_msg pointing to the connection to disconnect
*/
void
do_disconnect(struct api_msg_msg *msg)
{
#if LWIP_UDP
if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_UDP) {
udp_disconnect(msg->conn->pcb.udp);
msg->err = ERR_OK;
} else
#endif /* LWIP_UDP */
{
msg->err = ERR_VAL;
}
TCPIP_APIMSG_ACK(msg);
}
示例13: lwip_netconn_do_write
/**
* Send some data on a TCP pcb contained in a netconn
* Called from netconn_write
*
* @param msg the api_msg_msg pointing to the connection
*/
void
lwip_netconn_do_write(struct api_msg_msg *msg)
{
if (ERR_IS_FATAL(msg->conn->last_err)) {
msg->err = msg->conn->last_err;
} else {
if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP) {
#if LWIP_TCP
if (msg->conn->state != NETCONN_NONE) {
/* netconn is connecting, closing or in blocking write */
msg->err = ERR_INPROGRESS;
} else if (msg->conn->pcb.tcp != NULL) {
msg->conn->state = NETCONN_WRITE;
/* set all the variables used by lwip_netconn_do_writemore */
LWIP_ASSERT("already writing or closing", msg->conn->current_msg == NULL &&
msg->conn->write_offset == 0);
LWIP_ASSERT("msg->msg.w.len != 0", msg->msg.w.len != 0);
msg->conn->current_msg = msg;
msg->conn->write_offset = 0;
#if LWIP_TCPIP_CORE_LOCKING
msg->conn->flags &= ~NETCONN_FLAG_WRITE_DELAYED;
if (lwip_netconn_do_writemore(msg->conn) != ERR_OK) {
LWIP_ASSERT("state!", msg->conn->state == NETCONN_WRITE);
UNLOCK_TCPIP_CORE();
sys_arch_sem_wait(&msg->conn->op_completed, 0);
LOCK_TCPIP_CORE();
LWIP_ASSERT("state!", msg->conn->state == NETCONN_NONE);
}
#else /* LWIP_TCPIP_CORE_LOCKING */
lwip_netconn_do_writemore(msg->conn);
#endif /* LWIP_TCPIP_CORE_LOCKING */
/* for both cases: if lwip_netconn_do_writemore was called, don't ACK the APIMSG
since lwip_netconn_do_writemore ACKs it! */
return;
} else {
msg->err = ERR_CONN;
}
#else /* LWIP_TCP */
msg->err = ERR_VAL;
#endif /* LWIP_TCP */
#if (LWIP_UDP || LWIP_RAW)
} else {
msg->err = ERR_VAL;
#endif /* (LWIP_UDP || LWIP_RAW) */
}
}
TCPIP_APIMSG_ACK(msg);
}
示例14: do_getaddr
/**
* Return a connection's local or remote address
* Called from netconn_getaddr
*
* @param msg the api_msg_msg pointing to the connection
*/
void
do_getaddr(struct api_msg_msg *msg)
{
if (msg->conn->pcb.ip != NULL) {
*(msg->msg.ad.ipaddr) = (msg->msg.ad.local ? msg->conn->pcb.ip->local_ip :
msg->conn->pcb.ip->remote_ip);
msg->err = ERR_OK;
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
if (msg->msg.ad.local) {
*(msg->msg.ad.port) = msg->conn->pcb.raw->protocol;
} else {
/* return an error as connecting is only a helper for upper layers */
msg->err = ERR_CONN;
}
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
if (msg->msg.ad.local) {
*(msg->msg.ad.port) = msg->conn->pcb.udp->local_port;
} else {
if ((msg->conn->pcb.udp->flags & UDP_FLAGS_CONNECTED) == 0) {
msg->err = ERR_CONN;
} else {
*(msg->msg.ad.port) = msg->conn->pcb.udp->remote_port;
}
}
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
*(msg->msg.ad.port) = (msg->msg.ad.local?msg->conn->pcb.tcp->local_port:msg->conn->pcb.tcp->remote_port);
break;
#endif /* LWIP_TCP */
default:
LWIP_ASSERT("invalid netconn_type", 0);
break;
}
} else {
msg->err = ERR_CONN;
}
TCPIP_APIMSG_ACK(msg);
}
示例15: do_send
/**
* Send some data on a RAW or UDP pcb contained in a netconn
* Called from netconn_send
*
* @param msg the api_msg_msg pointing to the connection
*/
void
do_send(struct api_msg_msg *msg)
{
if (ERR_IS_FATAL(msg->conn->last_err)) {
msg->err = msg->conn->last_err;
} else {
msg->err = ERR_CONN;
if (msg->conn->pcb.tcp != NULL) {
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
if (ip_addr_isany(&msg->msg.b->addr)) {
msg->err = raw_send(msg->conn->pcb.raw, msg->msg.b->p);
} else {
msg->err = raw_sendto(msg->conn->pcb.raw, msg->msg.b->p, &msg->msg.b->addr);
}
break;
#endif
#if LWIP_UDP
case NETCONN_UDP:
#if LWIP_CHECKSUM_ON_COPY
if (ip_addr_isany(&msg->msg.b->addr)) {
msg->err = udp_send_chksum(msg->conn->pcb.udp, msg->msg.b->p,
msg->msg.b->flags & NETBUF_FLAG_CHKSUM, msg->msg.b->toport_chksum);
} else {
msg->err = udp_sendto_chksum(msg->conn->pcb.udp, msg->msg.b->p,
&msg->msg.b->addr, msg->msg.b->port,
msg->msg.b->flags & NETBUF_FLAG_CHKSUM, msg->msg.b->toport_chksum);
}
#else /* LWIP_CHECKSUM_ON_COPY */
if (ip_addr_isany(&msg->msg.b->addr)) {
msg->err = udp_send(msg->conn->pcb.udp, msg->msg.b->p);
} else {
msg->err = udp_sendto(msg->conn->pcb.udp, msg->msg.b->p, &msg->msg.b->addr, msg->msg.b->port);
}
#endif /* LWIP_CHECKSUM_ON_COPY */
break;
#endif /* LWIP_UDP */
default:
break;
}
}
}
TCPIP_APIMSG_ACK(msg);
}