当前位置: 首页>>代码示例>>C++>>正文

C++ MicoGpioOutputLow函数代码示例

本文整理汇总了C++中MicoGpioOutputLow函数的典型用法代码示例。如果您正苦于以下问题：C++ MicoGpioOutputLow函数的具体用法？C++ MicoGpioOutputLow怎么用？C++ MicoGpioOutputLow使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了MicoGpioOutputLow函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: mico_system_delegate_config_success

void mico_system_delegate_config_success( mico_config_source_t source )
{
  config_delegate_log_trace();
#ifdef USE_MiCOKit_EXT
  char oled_show_line[OLED_DISPLAY_MAX_CHAR_PER_ROW+1] = {'\0'};
#endif
  
  config_delegate_log( "Wi-Fi configed by: %d", source );

  MicoGpioOutputLow((mico_gpio_t)MICO_SYS_LED);  
  
#ifdef USE_MiCOKit_EXT
  memset(oled_show_line, '\0', OLED_DISPLAY_MAX_CHAR_PER_ROW+1);
  if(CONFIG_BY_AIRKISS == source){
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"Airkiss success ");
  }else if(CONFIG_BY_SOFT_AP == source){
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"SoftAP success  ");
  }else if(CONFIG_BY_WAC == source){
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"WAC success     ");
  }else if( (CONFIG_BY_EASYLINK_V2 == source) || (CONFIG_BY_EASYLINK_PLUS == source) || 
           (CONFIG_BY_EASYLINK_MINUS == source) ){
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"Easylink success");
  }else{
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"Unknown         ");
  }
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_2, (uint8_t*)oled_show_line);
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_3, (uint8_t*)"                ");
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_4, (uint8_t*)"                ");
#endif
  
  return;
}
开发者ID:brucehelen，项目名称:MICO3288，代码行数:32，代码来源:MICOConfigDelegate.c

示例2: init_platform

void init_platform( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
 // MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  //MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
  
  //  Initialise EasyLink buttons
  MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_PULL_UP );
  mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
  MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );

  //MicoFlashInitialize( MICO_SPI_FLASH );
  
#ifdef USE_MiCOKit_EXT
  dc_motor_init( );
  dc_motor_set( 0 );
  
  rgb_led_init();
  rgb_led_open(0, 0, 0);
#endif
}
开发者ID:hujg，项目名称:smartCup_micokit_V2.3.0.2，代码行数:25，代码来源:platform.c

示例3: platform_reset_wlan_powersave_clock

static OSStatus platform_reset_wlan_powersave_clock( void )
{
    /* Tie the pin to ground */
    MicoGpioInitialize( (mico_gpio_t) MICO_GPIO_WLAN_POWERSAVE_CLOCK, OUTPUT_PUSH_PULL );
    MicoGpioOutputLow( (mico_gpio_t) MICO_GPIO_WLAN_POWERSAVE_CLOCK );
    return kNoErr;
}
开发者ID:diegoaugustus，项目名称:MICO，代码行数:7，代码来源:wlan_platform.c

示例4: init_platform

void init_platform( void )
{
  button_init_t init;

  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);

  init.gpio = EasyLink_BUTTON;
  init.pressed_func = PlatformEasyLinkButtonClickedCallback;
  init.long_pressed_func = PlatformEasyLinkButtonLongPressedCallback;
  init.long_pressed_timeout = 5000;

  button_init( IOBUTTON_EASYLINK, init );
  
#ifdef USE_MiCOKit_EXT
  dc_motor_init( );
  dc_motor_set( 0 );
  
  rgb_led_init();
  rgb_led_open(0, 0, 0);
#endif
}
开发者ID:OfficeKit，项目名称:OfficeKit_Embed_MiCO，代码行数:27，代码来源:platform.c

示例5: setLightState_command

void setLightState_command(char *property, mico_Context_t * const inContext)
{
  if(0==strcmp(property, "light 0")){
    MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  }else if(0==strcmp(property, "light 1")){
    MicoGpioOutputHigh( (mico_gpio_t)MICO_SYS_LED );
  }
}
开发者ID:HargicStudio，项目名称:SmartCup_MiCOKit_v2.4.0.0，代码行数:8，代码来源:acaapp.c

示例6: MicoRfLed

void MicoRfLed(bool onoff)
{
    if (onoff) {
        MicoGpioOutputLow( (mico_gpio_t)MICO_RF_LED );
    } else {
        MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
    }
}
开发者ID:ChinaAmada，项目名称:MICO，代码行数:8，代码来源:platform.c

示例7: ResetF411

void ResetF411(void)
{
    MicoGpioOutputLow(F411_RESET_PIN);
    mico_thread_msleep(100);
    MicoGpioOutputHigh(F411_RESET_PIN);
    mico_thread_msleep(100);

    AaSysLogPrint(LOGLEVEL_INF, "f411 rest done");
}
开发者ID:HargicStudio，项目名称:SmartCup_MiCOKit_v2.4.0.0，代码行数:9，代码来源:controllerBus.c

示例8: init_platform_bootloader

void init_platform_bootloader( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_HIGH_IMPEDANCE);
}
开发者ID:JACK847070222，项目名称:MICO，代码行数:10，代码来源:platform.c

示例9: ConfigWillStop

void ConfigWillStop( mico_Context_t * const inContext )
{
  (void)(inContext); 
  config_delegate_log_trace();

  mico_stop_timer(&_Led_EL_timer);
  mico_deinit_timer( &_Led_EL_timer );
  MicoGpioOutputLow((mico_gpio_t)MICO_SYS_LED);
  return;
}
开发者ID:hujg，项目名称:mico_v2.2.0，代码行数:10，代码来源:MICOConfigDelegate.c

示例10: host_platform_reset_wifi

void host_platform_reset_wifi( bool reset_asserted )
{
  if ( reset_asserted == true )
  {
    MicoGpioOutputLow( (mico_gpio_t)WL_RESET );  
  }
  else
  {
    MicoGpioOutputHigh( (mico_gpio_t)WL_RESET ); 
  }
}
开发者ID:ChinaAmada，项目名称:MICO，代码行数:11，代码来源:platform.c

示例11: host_platform_power_wifi

void host_platform_power_wifi( bool power_enabled )
{
  if ( power_enabled == true )
  {
    MicoGpioOutputLow( (mico_gpio_t)WL_REG );
  }
  else
  {
    MicoGpioOutputHigh( (mico_gpio_t)WL_REG ); 
  }
}
开发者ID:ChinaAmada，项目名称:MICO，代码行数:11，代码来源:platform.c

示例12: init_platform_bootloader

void init_platform_bootloader( void )
{
  OSStatus err = kNoErr;
  
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
}
开发者ID:hujg，项目名称:mico_v2.2.0，代码行数:12，代码来源:platform.c

示例13: init_platform

void init_platform( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
  
  //  Initialise EasyLink buttons
  MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_PULL_UP );
  mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
  MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );
}
开发者ID:HargicStudio，项目名称:SmartCup_MiCOKit_v2.4.0.0，代码行数:15，代码来源:platform.c

示例14: init_platform_bootloader

void init_platform_bootloader( void )
{
  MicoGpioInitialize( MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputHigh( MICO_SYS_LED );
  MicoGpioInitialize( MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( MICO_RF_LED );
  
  MicoGpioInitialize(BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize(MFG_SEL, INPUT_PULL_UP);

#ifdef USE_MiCOKit_EXT
  MicoGpioInitialize( Arduino_D9, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( Arduino_D9 );
#endif
  
}
开发者ID:robbie-cao，项目名称:MiCO，代码行数:16，代码来源:platform.c

示例15: init_platform

void init_platform( void )
{
    MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
    MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
    MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
    MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );

    //  Initialise EasyLink buttons
    MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_HIGH_IMPEDANCE );
    mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
    MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );

#ifdef USE_MiCOKit_EXT
    dc_motor_init( );
    dc_motor_set( 0 );
#endif
}
开发者ID:EmuxEvans，项目名称:SDK_MiCOKit_v2.3.0.2，代码行数:17，代码来源:platform.c


注：本文中的MicoGpioOutputLow函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。