当前位置: 首页>>代码示例>>C++>>正文

C++ MII_PHY_DESC函数代码示例

本文整理汇总了C++中MII_PHY_DESC函数的典型用法代码示例。如果您正苦于以下问题：C++ MII_PHY_DESC函数的具体用法？C++ MII_PHY_DESC怎么用？C++ MII_PHY_DESC使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了MII_PHY_DESC函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: DRIVER_MODULE

DRIVER_MODULE(rlphy, miibus, rlphy_driver, rlphy_devclass, 0, 0);

static int	rlphy_service(struct mii_softc *, struct mii_data *, int);
static void	rlphy_status(struct mii_softc *);

/*
 * RealTek internal PHYs don't have vendor/device ID registers;
 * re(4) and rl(4) fake up a return value of all zeros.
 */
static const struct mii_phydesc rlintphys[] = {
	{ 0, 0, "RealTek internal media interface" },
	MII_PHY_END
};

static const struct mii_phydesc rlphys[] = {
	MII_PHY_DESC(REALTEK, RTL8201L),
	MII_PHY_DESC(ICPLUS, IP101),
	MII_PHY_END
};

static int
rlphy_probe(device_t dev)
{
	const char *nic;
	int rv;

	rv = mii_phy_dev_probe(dev, rlphys, BUS_PROBE_DEFAULT);
	if (rv <= 0)
		return (rv);

	nic = device_get_name(device_get_parent(device_get_parent(dev)));
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:31，代码来源:rlphy.c

示例2: brgphy_reset

static void	brgphy_reset(struct mii_softc *);
static void	brgphy_enable_loopback(struct mii_softc *);
static void	bcm5401_load_dspcode(struct mii_softc *);
static void	bcm5411_load_dspcode(struct mii_softc *);
static void	bcm54k2_load_dspcode(struct mii_softc *);
static void	brgphy_fixup_5704_a0_bug(struct mii_softc *);
static void	brgphy_fixup_adc_bug(struct mii_softc *);
static void	brgphy_fixup_adjust_trim(struct mii_softc *);
static void	brgphy_fixup_ber_bug(struct mii_softc *);
static void	brgphy_fixup_crc_bug(struct mii_softc *);
static void	brgphy_fixup_jitter_bug(struct mii_softc *);
static void	brgphy_ethernet_wirespeed(struct mii_softc *);
static void	brgphy_jumbo_settings(struct mii_softc *, u_long);

static const struct mii_phydesc brgphys[] = {
	MII_PHY_DESC(BROADCOM, BCM5400),
	MII_PHY_DESC(BROADCOM, BCM5401),
	MII_PHY_DESC(BROADCOM, BCM5411),
	MII_PHY_DESC(BROADCOM, BCM54K2),
	MII_PHY_DESC(BROADCOM, BCM5701),
	MII_PHY_DESC(BROADCOM, BCM5703),
	MII_PHY_DESC(BROADCOM, BCM5704),
	MII_PHY_DESC(BROADCOM, BCM5705),
	MII_PHY_DESC(BROADCOM, BCM5706),
	MII_PHY_DESC(BROADCOM, BCM5714),
	MII_PHY_DESC(BROADCOM, BCM5421),
	MII_PHY_DESC(BROADCOM, BCM5750),
	MII_PHY_DESC(BROADCOM, BCM5752),
	MII_PHY_DESC(BROADCOM, BCM5780),
	MII_PHY_DESC(BROADCOM, BCM5708C),
	MII_PHY_DESC(BROADCOM2, BCM5482),
开发者ID:AmirAbrams，项目名称:haiku，代码行数:31，代码来源:brgphy.c

示例3: sizeof

static devclass_t ip1000phy_devclass;
static driver_t ip1000phy_driver = {
	"ip1000phy",
	ip1000phy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(ip1000phy, miibus, ip1000phy_driver, ip1000phy_devclass, 0, 0);

static int	ip1000phy_service(struct mii_softc *, struct mii_data *, int);
static void	ip1000phy_status(struct mii_softc *);
static void	ip1000phy_reset(struct mii_softc *);
static int	ip1000phy_mii_phy_auto(struct mii_softc *, int);

static const struct mii_phydesc ip1000phys[] = {
	MII_PHY_DESC(xxICPLUS, IP1000A),
	MII_PHY_DESC(xxICPLUS, IP1001),
	MII_PHY_END
};

static const struct mii_phy_funcs ip1000phy_funcs = {
	ip1000phy_service,
	ip1000phy_status,
	ip1000phy_reset
};

static int
ip1000phy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, ip1000phys, BUS_PROBE_DEFAULT));
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:31，代码来源:ip1000phy.c

示例4: truephy_attach

static int	truephy_attach(device_t);
static int	truephy_probe(device_t);
static void	truephy_reset(struct mii_softc *);
static void	truephy_status(struct mii_softc *);

static device_method_t truephy_methods[] = {
	/* device interface */
	DEVMETHOD(device_probe,		truephy_probe),
	DEVMETHOD(device_attach,	truephy_attach),
	DEVMETHOD(device_detach,	mii_phy_detach),
	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
	{ 0, 0 }
};

static const struct mii_phydesc truephys[] = {
	MII_PHY_DESC(AGERE,	ET1011C),
	MII_PHY_END
};

static devclass_t truephy_devclass;

static driver_t truephy_driver = {
	"truephy",
	truephy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(truephy, miibus, truephy_driver, truephy_devclass, 0, 0);

static const struct truephy_dsp {
	uint16_t	index;
开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:31，代码来源:truephy.c

示例5: sizeof

static devclass_t nsphyter_devclass;

static driver_t nsphyter_driver = {
	"nsphyter",
	nsphyter_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(nsphyter, miibus, nsphyter_driver, nsphyter_devclass, 0, 0);

static int	nsphyter_service(struct mii_softc *, struct mii_data *, int);
static void	nsphyter_status(struct mii_softc *);
static void	nsphyter_reset(struct mii_softc *);

static const struct mii_phydesc nsphyters[] = {
	MII_PHY_DESC(xxNATSEMI, DP83815),
	MII_PHY_DESC(xxNATSEMI, DP83843),
	MII_PHY_DESC(xxNATSEMI, DP83847),
	MII_PHY_DESC(xxNATSEMI, DP83849),
	MII_PHY_END
};

static const struct mii_phy_funcs nsphyter_funcs = {
	nsphyter_service,
	nsphyter_status,
	nsphyter_reset
};

static int
nsphyter_probe(device_t dev)
{
开发者ID:looncraz，项目名称:haiku，代码行数:31，代码来源:nsphyter.c

示例6: sizeof

};

static devclass_t pnaphy_devclass;

static driver_t pnaphy_driver = {
	"pnaphy",
	pnaphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(pnaphy, miibus, pnaphy_driver, pnaphy_devclass, 0, 0);

static int	pnaphy_service(struct mii_softc *, struct mii_data *,int);

static const struct mii_phydesc pnaphys[] = {
	MII_PHY_DESC(yyAMD, 79c901home),
	MII_PHY_END
};

static const struct mii_phy_funcs pnaphy_funcs = {
	pnaphy_service,
	ukphy_status,
	mii_phy_reset
};

static int
pnaphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, pnaphys, BUS_PROBE_DEFAULT));
}
开发者ID:ele7enxxh，项目名称:dtrace-pf，代码行数:31，代码来源:pnaphy.c

示例7: sizeof

static driver_t atphy_driver = {
	"atphy",
	atphy_methods,
	sizeof(struct atphy_softc)
};

DRIVER_MODULE(atphy, miibus, atphy_driver, atphy_devclass, 0, 0);

static int	atphy_service(struct mii_softc *, struct mii_data *, int);
static void	atphy_status(struct mii_softc *);
static void	atphy_reset(struct mii_softc *);
static uint16_t	atphy_anar(struct ifmedia_entry *);
static int	atphy_auto(struct mii_softc *);

static const struct mii_phydesc atphys[] = {
	MII_PHY_DESC(ATHEROS, F1),
	MII_PHY_END
};

static int
atphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, atphys, BUS_PROBE_DEFAULT));
}

static int
atphy_attach(device_t dev)
{
	struct atphy_softc *asc;
	struct mii_softc *sc;
开发者ID:luciang，项目名称:haiku，代码行数:31，代码来源:atphy.c

示例8: sizeof

static devclass_t xmphy_devclass;

static driver_t xmphy_driver = {
	"xmphy",
	xmphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(xmphy, miibus, xmphy_driver, xmphy_devclass, 0, 0);

static int	xmphy_service(struct mii_softc *, struct mii_data *, int);
static void	xmphy_status(struct mii_softc *);
static int	xmphy_mii_phy_auto(struct mii_softc *);

static const struct mii_phydesc xmphys[] = {
	MII_PHY_DESC(xxJATO, BASEX),
	MII_PHY_DESC(xxXAQTI, XMACII),
	MII_PHY_END
};

static const struct mii_phy_funcs xmphy_funcs = {
	xmphy_service,
	xmphy_status,
	mii_phy_reset
};

static int
xmphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, xmphys, BUS_PROBE_DEFAULT));
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:31，代码来源:xmphy.c

示例9: sizeof

static devclass_t qsphy_devclass;

static driver_t qsphy_driver = {
	"qsphy",
	qsphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(qsphy, miibus, qsphy_driver, qsphy_devclass, 0, 0);

static int	qsphy_service(struct mii_softc *, struct mii_data *, int);
static void	qsphy_reset(struct mii_softc *);
static void	qsphy_status(struct mii_softc *);

static const struct mii_phydesc qsphys[] = {
	MII_PHY_DESC(xxQUALSEMI, QS6612),
	MII_PHY_END
};

static const struct mii_phy_funcs qsphy_funcs = {
	qsphy_service,
	qsphy_status,
	qsphy_reset
};

static int
qsphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, qsphys, BUS_PROBE_DEFAULT));
}
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:31，代码来源:qsphy.c

示例10: sizeof

};

static devclass_t pnaphy_devclass;

static driver_t pnaphy_driver = {
	"pnaphy",
	pnaphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(pnaphy, miibus, pnaphy_driver, pnaphy_devclass, 0, 0);

static int	pnaphy_service(struct mii_softc *, struct mii_data *,int);

static const struct mii_phydesc pnaphys[] = {
	MII_PHY_DESC(AMD, 79c978),
	MII_PHY_END
};

static int
pnaphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, pnaphys, BUS_PROBE_DEFAULT));
}

static int
pnaphy_attach(device_t dev)
{
	struct mii_softc *sc;
	struct mii_attach_args *ma;
开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:31，代码来源:pnaphy.c

示例11: sizeof

static devclass_t	bmtphy_devclass;

static driver_t	bmtphy_driver = {
	"bmtphy",
	bmtphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(bmtphy, miibus, bmtphy_driver, bmtphy_devclass, 0, 0);

static int	bmtphy_service(struct mii_softc *, struct mii_data *, int);
static void	bmtphy_status(struct mii_softc *);

static const struct mii_phydesc bmtphys_dp[] = {
	MII_PHY_DESC(BROADCOM, BCM4401),
	MII_PHY_DESC(BROADCOM, BCM5201),
	MII_PHY_DESC(BROADCOM, BCM5221),
	MII_PHY_END
};

static const struct mii_phydesc bmtphys_lp[] = {
	MII_PHY_DESC(BROADCOM, 3C905B),
	MII_PHY_DESC(BROADCOM, 3C905C),
	MII_PHY_END
};

static int
bmtphy_probe(device_t dev)
{
	int	rval;
开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:30，代码来源:bmtphy.c

示例12: DRIVER_MODULE

DRIVER_MODULE(xlphy, miibus, xlphy_driver, xlphy_devclass, 0, 0);

static int	xlphy_service(struct mii_softc *, struct mii_data *, int);
static void	xlphy_reset(struct mii_softc *);

/*
 * Some 3Com internal PHYs report zero for OUI and model, others use
 * actual values.
 * Note that the 3Com internal PHYs having OUI 0x105a and model 0 are
 * handled fine by ukphy(4); they can be isolated and don't require
 * special treatment after reset.
 */
static const struct mii_phydesc xlphys[] = {
	{ 0, 0, "3Com internal media interface" },
	MII_PHY_DESC(xxBROADCOM, 3C905C),
	MII_PHY_END
};

static const struct mii_phy_funcs xlphy_funcs = {
	xlphy_service,
	ukphy_status,
	xlphy_reset
};

static int
xlphy_probe(device_t dev)
{

	if (strcmp(device_get_name(device_get_parent(device_get_parent(dev))),
	    "xl") == 0)
开发者ID:edgar-pek，项目名称:PerspicuOS，代码行数:30，代码来源:xlphy.c

示例13: sizeof

	"rgephy",
	rgephy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(rgephy, miibus, rgephy_driver, rgephy_devclass, 0, 0);

static int	rgephy_service(struct mii_softc *, struct mii_data *, int);
static void	rgephy_status(struct mii_softc *);
static int	rgephy_mii_phy_auto(struct mii_softc *, int);
static void	rgephy_reset(struct mii_softc *);
static void	rgephy_loop(struct mii_softc *);
static void	rgephy_load_dspcode(struct mii_softc *);

static const struct mii_phydesc rgephys[] = {
	MII_PHY_DESC(REALTEK, RTL8169S),
	MII_PHY_DESC(REALTEK, RTL8251),
	MII_PHY_END
};

static const struct mii_phy_funcs rgephy_funcs = {
	rgephy_service,
	rgephy_status,
	rgephy_reset
};

static int
rgephy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, rgephys, BUS_PROBE_DEFAULT));
开发者ID:AmirAbrams，项目名称:haiku，代码行数:31，代码来源:rgephy.c

示例14: DRIVER_MODULE

DRIVER_MODULE(rlphy, miibus, rlphy_driver, rlphy_devclass, 0, 0);

static int	rlphy_service(struct mii_softc *, struct mii_data *, int);
static void	rlphy_status(struct mii_softc *);

/*
 * RealTek internal PHYs don't have vendor/device ID registers;
 * re(4) and rl(4) fake up a return value of all zeros.
 */
static const struct mii_phydesc rlintphys[] = {
	{ 0, 0, "RealTek internal media interface" },
	MII_PHY_END
};

static const struct mii_phydesc rlphys[] = {
	MII_PHY_DESC(yyREALTEK, RTL8201L),
	MII_PHY_DESC(REALTEK, RTL8201E),
	MII_PHY_DESC(xxICPLUS, IP101),
	MII_PHY_END
};

static const struct mii_phy_funcs rlphy_funcs = {
	rlphy_service,
	rlphy_status,
	mii_phy_reset
};

static int
rlphy_probe(device_t dev)
{
	const char *nic;
开发者ID:ele7enxxh，项目名称:dtrace-pf，代码行数:31，代码来源:rlphy.c

示例15: sizeof

static devclass_t amphy_devclass;

static driver_t amphy_driver = {
	"amphy",
	amphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(amphy, miibus, amphy_driver, amphy_devclass, 0, 0);

static int	amphy_service(struct mii_softc *, struct mii_data *, int);
static void	amphy_status(struct mii_softc *);

static const struct mii_phydesc amphys[] = {
	MII_PHY_DESC(xxDAVICOM, DM9102),
	MII_PHY_DESC(xxDAVICOM, DM9101),
	MII_PHY_DESC(yyDAVICOM, DM9101),
	MII_PHY_END
};

static const struct mii_phy_funcs amphy_funcs = {
	amphy_service,
	amphy_status,
	mii_phy_reset
};

static int
amphy_probe(device_t dev)
{
开发者ID:AhmadTux，项目名称:freebsd，代码行数:29，代码来源:amphy.c


注：本文中的MII_PHY_DESC函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。