当前位置: 首页>>代码示例>>C++>>正文

C++ MAP_IntVTableBaseSet函数代码示例

本文整理汇总了C++中MAP_IntVTableBaseSet函数的典型用法代码示例。如果您正苦于以下问题：C++ MAP_IntVTableBaseSet函数的具体用法？C++ MAP_IntVTableBaseSet怎么用？C++ MAP_IntVTableBaseSet使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了MAP_IntVTableBaseSet函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: BoardInit

//*****************************************************************************
//
//! Board Initialization & Configuration
//!
//! \param  None
//!
//! \return None
//
//*****************************************************************************
static void
BoardInit(void)
{
/* In case of TI-RTOS vector table is initialize by OS itself */
#ifndef USE_TIRTOS
    //
    // Set vector table base
    //
#if defined(ccs)
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);
#endif  //ccs
#if defined(ewarm)
    MAP_IntVTableBaseSet((unsigned long)&__vector_table);
#endif  //ewarm
    
#endif  //USE_TIRTOS
    
    //
    // Enable Processor
    //
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    PRCMCC3200MCUInit();
}
开发者ID:JamesHyunKim，项目名称:quickstart-samples，代码行数:34，代码来源:main.c

示例2: BoardInit

//*****************************************************************************
//
//! Board Initialization & Configuration
//!
//! \param  None
//!
//! \return None
//
//*****************************************************************************
static void
BoardInit(void)
{
    //
    // Set vector table base
    //
#ifndef USE_TIRTOS
  //
  // Set vector table base
  //
#if defined(ccs) || defined(gcc)
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);
#endif
#if defined(ewarm)
    MAP_IntVTableBaseSet((unsigned long)&__vector_table);
#endif
#endif

    //
    // Enable Processor
    //
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    PRCMCC3200MCUInit();
}
开发者ID:oter，项目名称:BSPTools，代码行数:35，代码来源:main.c

示例3: initBoard

void initBoard() {
#ifndef USE_TIRTOS
#if defined(ccs) || defined(gcc)
    MAP_IntVTableBaseSet((unsigned long) &g_pfnVectors[0]);
#endif
#if defined(ewarm)
    MAP_IntVTableBaseSet((unsigned long)&__vector_table);
#endif
#endif

    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    PRCMCC3200MCUInit();

    PinMuxConfig();
    GPIO_IF_LedConfigure(LED1);
    GPIO_IF_LedOff(MCU_RED_LED_GPIO);

    InitTerm();
    ClearTerm();

    UART_PRINT("Blink - Parse for IoT sample application\r\n");
    UART_PRINT("----------------------------------------\r\n");
    UART_PRINT("\r\n");
    UART_PRINT("[Blink] Board init\r\n");

    // start the spawn task
    short status = VStartSimpleLinkSpawnTask(SPAWN_TASK_PRIORITY);
    if (status < 0) {
        UART_PRINT("[Blink] Spawn task failed\r\n");
        ERR_PRINT(status);
        LOOP_FOREVER();
    }

    // initialize the I2C bus
    status = I2C_IF_Open(I2C_MASTER_MODE_FST);
    if (status < 0) {
        UART_PRINT("[Blink] I2C opening error\r\n");
        ERR_PRINT(status);
        LOOP_FOREVER();
    }

    UART_PRINT("[Blink] Device                    : TI SimpleLink CC3200\r\n");
#ifdef USE_TIRTOS
    UART_PRINT("[Blink] Operating system          : TI-RTOS\r\n");
#endif
#ifdef USE_FREERTOS
    UART_PRINT("[Blink] Operating system          : FreeRTOS\r\n");
#endif
#ifndef SL_PLATFORM_MULTI_THREADED
    UART_PRINT("[Blink] Operating system          : None\r\n");
#endif
}
开发者ID:AnjaneyuluAdepu，项目名称:parse-embedded-sdks，代码行数:54，代码来源:board.c

示例4: SysPlatformConfig

void SysPlatformConfig(void)
/********************************************************************************/
{
#if defined(COMPLIER_CCS)
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);
#elif defined(COMPLIER_EARM)
    MAP_IntVTableBaseSet((unsigned long)&__vector_table);
#endif
    
    /* Enable Processor */
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    PRCMCC3200MCUInit();
}
开发者ID:yuanzhen-liu，项目名称:Bootloader，代码行数:15，代码来源:PlatformStartup.c

示例5: bootmgr_board_init

//*****************************************************************************
//! Board Initialization & Configuration
//*****************************************************************************
static void bootmgr_board_init(void) {
    // set the vector table base
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    // enable processor interrupts
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    // mandatory MCU initialization
    PRCMCC3200MCUInit();

    // clear all the special bits, since we can't trust their content after reset
    // except for the WDT reset one!!
    PRCMClearSpecialBit(PRCM_SAFE_BOOT_BIT);
    PRCMClearSpecialBit(PRCM_FIRST_BOOT_BIT);

    // check the reset after clearing the special bits
    mperror_bootloader_check_reset_cause();

#if MICROPY_HW_ANTENNA_DIVERSITY
    // configure the antenna selection pins
    antenna_init0();
#endif

    // enable the data hashing engine
    CRYPTOHASH_Init();

    // init the system led and the system switch
    mperror_init0();
}
开发者ID:19emtuck，项目名称:micropython，代码行数:33，代码来源:main.c

示例6: main

int main() {
  MAP_IntVTableBaseSet((unsigned long) &g_pfnVectors[0]);
  MAP_IntEnable(FAULT_SYSTICK);
  MAP_IntMasterEnable();
  PRCMCC3200MCUInit();

  cc3200_leds_init();

  /* Console UART init. */
  MAP_PRCMPeripheralClkEnable(CONSOLE_UART_PERIPH, PRCM_RUN_MODE_CLK);
  MAP_PinTypeUART(PIN_55, PIN_MODE_3); /* PIN_55 -> UART0_TX */
  MAP_PinTypeUART(PIN_57, PIN_MODE_3); /* PIN_57 -> UART0_RX */
  MAP_UARTConfigSetExpClk(
      CONSOLE_UART, MAP_PRCMPeripheralClockGet(CONSOLE_UART_PERIPH),
      CONSOLE_BAUD_RATE,
      (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE | UART_CONFIG_PAR_NONE));
  MAP_UARTFIFODisable(CONSOLE_UART);

  setvbuf(stdout, NULL, _IONBF, 0);
  setvbuf(stderr, NULL, _IONBF, 0);

  VStartSimpleLinkSpawnTask(8);
  osi_TaskCreate(v7_task, (const signed char *) "v7", V7_STACK_SIZE + 256, NULL,
                 3, NULL);
  osi_TaskCreate(blinkenlights_task, (const signed char *) "blink", 256, NULL,
                 9, NULL);
  osi_start();

  return 0;
}
开发者ID:GDI123，项目名称:smart.js，代码行数:30，代码来源:main.c

示例7: bootmgr_board_init

//*****************************************************************************
//! Board Initialization & Configuration
//*****************************************************************************
static void bootmgr_board_init(void) {
    // set the vector table base
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    // enable processor interrupts
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    // mandatory MCU initialization
    PRCMCC3200MCUInit();

    mperror_bootloader_check_reset_cause();

#if MICROPY_HW_ANTENNA_DIVERSITY
    // configure the antenna selection pins
    antenna_init0();
#endif

    // enable the data hashing engine
    CRYPTOHASH_Init();

    // init the system led and the system switch
    mperror_init0();

    // clear the safe boot flag, since we can't trust its content after reset
    PRCMClearSafeBootRequest();
}
开发者ID:Ga-vin，项目名称:micropython，代码行数:30，代码来源:main.c

示例8: BoardInit

static void BoardInit(void)
{

  MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

  MAP_IntMasterEnable();
  MAP_IntEnable(FAULT_SYSTICK);

  PRCMCC3200MCUInit();
}
开发者ID:Eterneco，项目名称:iot_control，代码行数:10，代码来源:main.c

示例9: BoardInit

//*****************************************************************************
//
//! Board Initialization & Configuration
//!
//! \param  None
//!
//! \return None
//
//*****************************************************************************
static void BoardInit(void)
{
    // Set vector table base
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    // Enable Processor
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    PRCMCC3200MCUInit();
}
开发者ID:tzhenghao，项目名称:TimerInterruptsOnCC3200，代码行数:20，代码来源:main.c

示例10: main

int main() {
#ifndef USE_TIRTOS
  MAP_IntVTableBaseSet((unsigned long) &g_pfnVectors[0]);
#endif
  MAP_IntEnable(FAULT_SYSTICK);
  MAP_IntMasterEnable();
  PRCMCC3200MCUInit();

  /* Console UART init. */
  MAP_PRCMPeripheralClkEnable(CONSOLE_UART_PERIPH, PRCM_RUN_MODE_CLK);
  MAP_PinTypeUART(PIN_55, PIN_MODE_3); /* PIN_55 -> UART0_TX */
  MAP_PinTypeUART(PIN_57, PIN_MODE_3); /* PIN_57 -> UART0_RX */
  MAP_UARTConfigSetExpClk(
      CONSOLE_UART, MAP_PRCMPeripheralClockGet(CONSOLE_UART_PERIPH),
      CONSOLE_BAUD_RATE,
      (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE | UART_CONFIG_PAR_NONE));
  MAP_UARTFIFOLevelSet(CONSOLE_UART, UART_FIFO_TX1_8, UART_FIFO_RX4_8);
  MAP_UARTFIFOEnable(CONSOLE_UART);

  setvbuf(stdout, NULL, _IOLBF, 0);
  setvbuf(stderr, NULL, _IOLBF, 0);
  cs_log_set_level(LL_INFO);
  cs_log_set_file(stdout);

  LOG(LL_INFO, ("Hello, world!"));

  MAP_PinTypeI2C(PIN_01, PIN_MODE_1); /* SDA */
  MAP_PinTypeI2C(PIN_02, PIN_MODE_1); /* SCL */
  I2C_IF_Open(I2C_MASTER_MODE_FST);

  /* Set up the red LED. Note that amber and green cannot be used as they share
   * pins with I2C. */
  MAP_PRCMPeripheralClkEnable(PRCM_GPIOA1, PRCM_RUN_MODE_CLK);
  MAP_PinTypeGPIO(PIN_64, PIN_MODE_0, false);
  MAP_GPIODirModeSet(GPIOA1_BASE, 0x2, GPIO_DIR_MODE_OUT);
  GPIO_IF_LedConfigure(LED1);
  GPIO_IF_LedOn(MCU_RED_LED_GPIO);

  if (VStartSimpleLinkSpawnTask(8) != 0) {
    LOG(LL_ERROR, ("Failed to create SL task"));
  }

  if (!mg_start_task(MG_TASK_PRIORITY, MG_TASK_STACK_SIZE, mg_init)) {
    LOG(LL_ERROR, ("Failed to create MG task"));
  }

  osi_start();

  return 0;
}
开发者ID:cobookman，项目名称:mongoose，代码行数:50，代码来源:main.c

示例11: BoardInit

static void BoardInit()
{
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    PRCMCC3200MCUInit();

    UDMAInit();

    MAP_PRCMPeripheralClkEnable(PRCM_UARTA0, PRCM_RUN_MODE_CLK);
    MAP_PinTypeUART(PIN_55, PIN_MODE_3);
    MAP_PinTypeUART(PIN_57, PIN_MODE_3);

    InitTerm();
}
开发者ID:BillTheBest，项目名称:sample-apps，代码行数:17，代码来源:cc32xx_support.c

示例12: BoardInit

//*****************************************************************************
//
//! Board Initialization & Configuration
//!
//! \param  None
//!
//! \return None
//
//*****************************************************************************
static void
BoardInit(void)
{
/* In case of TI-RTOS vector table is initialize by OS itself */
    //
    // Set vector table base
    //
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    //
    // Enable Processor
    //
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    PRCMCC3200MCUInit();
}
开发者ID:CaptFrank，项目名称:CC3200-Linux-SDK，代码行数:26，代码来源:main.c

示例13: bootmgr_board_init

//*****************************************************************************
//! Board Initialization & Configuration
//*****************************************************************************
static void bootmgr_board_init(void) {
    // Set vector table base
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    // Enable Processor Interrupts
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    // Mandatory MCU Initialization
    PRCMCC3200MCUInit();

    mperror_bootloader_check_reset_cause();

    // Enable the Data Hashing Engine
    HASH_Init();

    // Init the system led and the system switch
    mperror_init0();

    // clear the safe boot flag, since we can't trust its content after reset
    PRCMClearSafeBootRequest();
}
开发者ID:Dreamapple，项目名称:micropython，代码行数:25，代码来源:main.c

示例14: main

int main()
{
  MAP_IntVTableBaseSet((unsigned long)vectors);
  MAP_IntMasterEnable();
  MAP_IntEnable(FAULT_SYSTICK);
  PRCMCC3200MCUInit();
#ifdef UART_LOG
  MAP_PRCMPeripheralClkEnable(PRCM_UART_TERM, PRCM_RUN_MODE_CLK);
  MAP_PinTypeUART(PIN_TERM_TX, PIN_TERM_TX_MODE);
  MAP_PinTypeUART(PIN_TERM_RX, PIN_TERM_RX_MODE);
  MAP_UARTConfigSetExpClk(UART_TERM,
                          MAP_PRCMPeripheralClockGet(PRCM_UART_TERM),
                          115200,
                          (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE |UART_CONFIG_PAR_NONE));
#endif

  MonitorLoop();

  asm(" BKPT");
  while ( 1 );

  return 0;
}
开发者ID:M3gaFr3ak，项目名称:found-bits，代码行数:23，代码来源:main.c

示例15: bootmgr_board_init

//*****************************************************************************
//! Board Initialization & Configuration
//*****************************************************************************
static void bootmgr_board_init(void) {
    // Set vector table base
    MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);

    // Enable Processor Interrupts
    MAP_IntMasterEnable();
    MAP_IntEnable(FAULT_SYSTICK);

    // Mandatory MCU Initialization
    PRCMCC3200MCUInit();

    pybwdt_check_reset_cause();

    // Enable the Data Hashing Engine
    HASH_Init();

    // Init the system led and the system switch
    mperror_init0();

    // clear the safe boot request, since we should not trust
    // the register's state after reset
    mperror_clear_safe_boot();
}
开发者ID:jasongwq，项目名称:micropython，代码行数:26，代码来源:main.c


注：本文中的MAP_IntVTableBaseSet函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。