当前位置: 首页>>代码示例>>C++>>正文

C++ LCD_UsrLog函数代码示例

本文整理汇总了C++中LCD_UsrLog函数的典型用法代码示例。如果您正苦于以下问题：C++ LCD_UsrLog函数的具体用法？C++ LCD_UsrLog怎么用？C++ LCD_UsrLog使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了LCD_UsrLog函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: USBH_USR_Init

/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;  
  
  if(startup == 0 )
  {
    startup = 1;
    /* Configure the LEDs */
    STM_EVAL_LEDInit(LED3); 
    STM_EVAL_LEDInit(LED4); 
    
    STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_GPIO);
       
    /* Initialize the LCD */
    LCD_Init();
    LCD_LayerInit();
    
    /* Set LCD background layer */
    LCD_SetLayer(LCD_BACKGROUND_LAYER);
    
    /* Set LCD transparency */
    LCD_SetTransparency(0);
    
    /* Set LCD foreground layer */
    LCD_SetLayer(LCD_FOREGROUND_LAYER);
    
    /* LTDC reload configuration */  
    LTDC_ReloadConfig(LTDC_IMReload);
    
    /* Enable the LTDC */
    LTDC_Cmd(ENABLE);
    
    /* LCD Log initialization */
    LCD_LOG_Init(); 
    
    
#ifdef USE_USB_OTG_HS 
    LCD_LOG_SetHeader("PDF Create");
#else
    LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
    LCD_UsrLog("> USB Host library started.\n"); 
    LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
  }
}
开发者ID:HuanDeng，项目名称:Qproject，代码行数:51，代码来源:usbh_usr.c

示例2: Audio_InitApplication

/**
  * @brief  Audio application Init.
  * @param  None
  * @retval None
  */
static void Audio_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);               
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1 and LED3 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED3);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS Audio Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS Audio Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio Interface */
  USBH_UsrLog("Starting Audio Demo");
  AUDIO_MenuInit();
  
  /* Initialize the microSD */
  if(SD_StorageInit() == 0)
  {
    SD_StorageParse();
  }
}
开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:50，代码来源:main.c

示例3: MTP_ExploreWavFile

/**
  * @brief  Explores Wav Files. 
  * @param  None
  * @retval Returns 0 if OK, otherwise 1.
  */
uint8_t MTP_ExploreWavFile(void)
{
  uint8_t ret = 1;
  uint32_t index;
  MTP_ObjectInfoTypedef objectinfo;
  
  MTP_Init();
  
  if(USBH_MTP_IsReady(&hUSBHost) > 0)
  {
    LCD_UsrLog("\nAvailable wav files:\n");
 
    /* Get Available WAV files number */
    if((NumObs = MTP_GetWavObjectNumber()) > 0)
    {
      /* Get objects handlers */
      if(MTP_GetWavObjectHandles() == 0)
      {
        ret = 0; 
        
        for (index = 0; index < NumObs; index ++)
        {
          if( USBH_MTP_GetObjectInfo (&hUSBHost, 
                                      WavHandles.Handler[index], 
                                      &objectinfo) == USBH_OK)
            
          {
            LCD_DbgLog(" %lu- %s\n", index, objectinfo.Filename);
          }
          else
          {
            ret = 1; 
          }
        }
      }
    }
  }
  else
  {
    LCD_ErrLog("MTP Device Not yet ready...\n");
  }
  
  return ret;
}
开发者ID:z80，项目名称:stm32f429，代码行数:49，代码来源:mtp.c

示例4: main

int main(void)
{
  extern uint32_t SystemCoreClock;

  //HAL init, etc
  common_init();

  //System clock config (200 MHz)
  SystemClock_Config();

  //LCD, SDRAM, DMA2D init.
  lcd_init();

  LCD_LOG_Init();
  LCD_LOG_SetHeader( ( uint8_t* )"LCD LOG" );
  LCD_UsrLog( "LOG is ready\n" );
  LCD_UsrLog( "MCU runs at %lu MHz\n", SystemCoreClock / 1000000 );

  LCD_UsrLog( "Define threads\n" );

  //Init on BTN pressed
  if( BSP_PB_GetState( BUTTON_KEY ) )
  {
    //KEY pressed
    LCD_UsrLog( "AF\n" );

    LCD_UsrLog( "Done!\n" );
    while(1)
    {
      //Do nothing
    }
  }
  else
  {
    //Normal mode
  }

  LCD_UsrLog( "Create threads\n" );
  tasks_init();
  

  LCD_UsrLog( "Starting OS kernel...\n" );
  osKernelStart();

  return 0;
}
开发者ID:VGeo，项目名称:stm32f746_fw_loader，代码行数:46，代码来源:main.c

示例5: LCD_Config

/**
  * @brief  LCD configuration.
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
  /* LCD Initialization */ 
  BSP_LCD_Init();

  /* LCD Layers Initialization */ 
  BSP_LCD_LayerDefaultInit(LCD_FOREGROUND_LAYER, (LCD_FRAME_BUFFER + BUFFER_OFFSET));
  
  /* Configure the transparency for foreground : Increase the transparency */
  BSP_LCD_SetTransparency(LCD_BACKGROUND_LAYER, 0);
  BSP_LCD_SelectLayer(LCD_FOREGROUND_LAYER);

  /* LCD Log initialization */
  LCD_LOG_Init(); 

  LCD_LOG_SetHeader((uint8_t *)"LTDC Application");
  LCD_UsrLog("> USB Host library started.\n"); 
  LCD_LOG_SetFooter ((uint8_t *)"     USB Host Library V3.2.0" );
}
开发者ID:eemei，项目名称:library-stm32f4，代码行数:24，代码来源:main.c

示例6: AUDIO_InitApplication

/**
  * @brief  Audio Application Init.
  * @param  None
  * @retval None
  */
static void AUDIO_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)"Audio Playback and Record Application");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio interface */
  USBH_UsrLog("Starting Audio Demo");
  
  /* Init Audio interface */
  AUDIO_PLAYER_Init();
  
  /* Start Audio interface */
  AUDIO_MenuInit();
}
开发者ID:eemei，项目名称:library-stm32f4，代码行数:47，代码来源:main.c

示例7: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MSC Interface */
  USBH_UsrLog("Starting MSC Demo");
  
  Menu_Init();
}
开发者ID:eemei，项目名称:library-stm32f4，代码行数:47，代码来源:main.c

示例8: BSP_Config

/**
  * @brief  Configurates the BSP.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Set Systick Interrupt to the highest priority */
  HAL_NVIC_SetPriority(SysTick_IRQn, 0x0, 0x0);
  
  /* Init IO Expander */
  BSP_IO_Init();
  
  /* Enable IO Expander interrupt for ETH MII pin */
  BSP_IO_ConfigPin(MII_INT_PIN, IO_MODE_IT_FALLING_EDGE);

#ifdef USE_LCD

  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Layers */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS);
  
  /* Set LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);
  
  BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Ethernet IAP Application");
  LCD_LOG_SetFooter((uint8_t *)"STM324x9I-EVAL board");
  
  LCD_UsrLog ("  State: Ethernet Initialization ...\n");

#endif
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:46，代码来源:main.c

示例9: USBH_USR_Init

/**
* @brief  USBH_USR_Init
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;

  if(startup == 0 )
  {
    startup = 1;


    /*
    STM_EVAL_LEDInit(LED1);
    STM_EVAL_LEDInit(LED2);
    STM_EVAL_LEDInit(LED3);
    STM_EVAL_LEDInit(LED4);

    STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_GPIO);

#if defined (USE_STM322xG_EVAL)
  STM322xG_LCD_Init();
#elif defined(USE_STM324xG_EVAL)
  STM324xG_LCD_Init();
#elif defined (USE_STM3210C_EVAL)
  STM3210C_LCD_Init();
#else
 #error "Missing define: Evaluation board (ie. USE_STM322xG_EVAL)"
#endif

    LCD_LOG_Init();

#ifdef USE_USB_OTG_HS
    LCD_LOG_SetHeader(" USB OTG HS MSC Host");
#else
    LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
    LCD_UsrLog("> USB Host library started.\n");
    LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
    */
  LCD_UsrLog("> USB Host library started.\n");
  }
}
开发者ID:greentechhobby，项目名称:GES_SolarMPPT，代码行数:46，代码来源:usbh_usr.c

示例10: BSP_Config

/**
  * @brief  Initializes the STM324xG-EVAL's LCD and LEDs resources.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{  
  GPIO_InitTypeDef GPIO_InitStructure;
  
  /* Enable PB14 to IT mode: Ethernet Link interrupt */ 
  __HAL_RCC_GPIOB_CLK_ENABLE();
  GPIO_InitStructure.Pin = GPIO_PIN_14;
  GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING;
  GPIO_InitStructure.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
 
  /* Enable EXTI Line interrupt */
  HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0x5, 0x0);
  HAL_NVIC_EnableIRQ(EXTI15_10_IRQn); 
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Set Systick Interrupt to the highest priority */
  HAL_NVIC_SetPriority(SysTick_IRQn, 0x0, 0x0);
 
#ifdef USE_LCD  
  
  /* Initialize the STM324xG-EVAL's LCD */
  BSP_LCD_Init();

  /* Initialize LCD Log module */
  LCD_LOG_Init();  

  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Ethernet IAP Application");
  LCD_LOG_SetFooter((uint8_t *)"STM324xG-EVAL board");
  
  LCD_UsrLog("  State: Ethernet Initialization ...\n");
  
#endif
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:45，代码来源:main.c

示例11: USBD_USR_Init

/**
* @brief  USBD_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBD_USR_Init(void)
{  
  /* Initialize LEDs */
  STM_EVAL_LEDInit(LED1);
  STM_EVAL_LEDInit(LED2);
  STM_EVAL_LEDInit(LED3);
  STM_EVAL_LEDInit(LED4);   
  
  /* Initialize the LCD */
#if defined (USE_STM322xG_EVAL)
  STM322xG_LCD_Init();
#elif defined(USE_STM324xG_EVAL)
  STM324xG_LCD_Init();
#elif defined (USE_STM3210C_EVAL)
  STM3210C_LCD_Init();
#else
 #error "Missing define: Evaluation board (ie. USE_STM322xG_EVAL)"
#endif

  LCD_LOG_Init();
  
#ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS AUDIO Device");
#else
  LCD_LOG_SetHeader(" USB OTG FS AUDIO Device");
#endif
  LCD_UsrLog("> USB device library started.\n"); 
  LCD_LOG_SetFooter ("     USB Device Library v1.1.0" ); 
  
  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 48, USER_INFORMATION1);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR); 

  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 32, USER_INFORMATION2);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR);   
}
开发者ID:Ghanyy，项目名称:PTM-STM32F4，代码行数:45，代码来源:usbd_usr.c

示例12: BSP_Config

/**
  * @brief  Initializes the LCD and LEDs resources.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
   
  /* Enable PB14 to IT mode: Ethernet Link interrupt */ 
  __GPIOB_CLK_ENABLE(); 
  GPIO_InitStructure.Pin = GPIO_PIN_14;
  GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING;
  GPIO_InitStructure.Pull = GPIO_NOPULL ;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
  
  /* Enable EXTI Line interrupt */
  HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0xF, 0);
  HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
  
  /* Initialize LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
#ifdef USE_LCD
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Webserver Application");
  LCD_LOG_SetFooter((uint8_t *)"STM324xG-EVAL board");
  
  LCD_UsrLog ("  State: Ethernet Initialization ...\n");
#endif
}
开发者ID:chsigi，项目名称:blindschleiche，代码行数:43，代码来源:main.c

示例13: BSP_Config

/**
  * @brief  Initializes the STM32756G-EVAL's LCD and LEDs resources.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{
    /* Configure LED1, LED2, LED3 and LED4 */
    BSP_LED_Init(LED1);
    BSP_LED_Init(LED2);
    BSP_LED_Init(LED3);
    BSP_LED_Init(LED4);

    /* Init MFX */
    BSP_IO_Init();

    /* Enable MFX interrupt for ETH MII pin */
    BSP_IO_ConfigPin(MII_INT_PIN, IO_MODE_IT_FALLING_EDGE);

#ifdef USE_LCD

    /* Initialize the LCD */
    BSP_LCD_Init();

    /* Initialize the LCD Layers */
    BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS);

    /* Set LCD Foreground Layer  */
    BSP_LCD_SelectLayer(1);

    BSP_LCD_SetFont(&LCD_DEFAULT_FONT);

    /* Initialize LCD Log module */
    LCD_LOG_Init();

    /* Show Header and Footer texts */
    LCD_LOG_SetHeader((uint8_t *)"Webserver Application Socket API");
    LCD_LOG_SetFooter((uint8_t *)"STM32756G-EVAL board");

    LCD_UsrLog ("  State: Ethernet Initialization ...\n");

#endif
}
开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:43，代码来源:main.c

示例14: Audio_InitApplication

/**
  * @brief  Audio application Init.
  * @param  None
  * @retval None
  */
static void Audio_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);               
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS Audio Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS Audio Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio Interface */
  USBH_UsrLog("Starting Audio Demo");
  AUDIO_MenuInit();
  
  /* Initialize the microSD */
  if(SD_StorageInit() == 0)
  {
    SD_StorageParse();
  }
}
开发者ID:451506709，项目名称:automated_machine，代码行数:43，代码来源:main.c

示例15: MTP_InitApplication

/**
  * @brief  MTP application Init.
  * @param  None
  * @retval None
  */
static void MTP_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MTP Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MTP Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MTP Interface */
  USBH_UsrLog("Starting MTP Demo");
  
  /* Init Audio interface */
  AUDIO_Init();
  
  /* Start MTP Interface */
  MTP_MenuInit();
}
开发者ID:451506709，项目名称:automated_machine，代码行数:42，代码来源:main.c


注：本文中的LCD_UsrLog函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。