当前位置: 首页>>代码示例>>C++>>正文

C++ LCD_LOG_SetHeader函数代码示例

本文整理汇总了C++中LCD_LOG_SetHeader函数的典型用法代码示例。如果您正苦于以下问题：C++ LCD_LOG_SetHeader函数的具体用法？C++ LCD_LOG_SetHeader怎么用？C++ LCD_LOG_SetHeader使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了LCD_LOG_SetHeader函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: Image_Browser

static uint8_t Image_Browser (char* path)
{
  FRESULT res;
  uint8_t ret = 1;
  FILINFO fno;
  DIR dir;
  char *fn;
  uint8_t key = 0;
  
  res = f_opendir(&dir, path);
  if (res == FR_OK) {
    
    for (;;) {
      res = f_readdir(&dir, &fno);
      if (res != FR_OK || fno.fname[0] == 0) break;
      if (fno.fname[0] == '.') continue;

      fn = fno.fname;
 
      if (fno.fattrib & AM_DIR) 
      {
        continue;
      } 
      else 
      {
        if((strstr(fn, "bmp")) || (strstr(fn, "BMP")))
        {
          res = f_open(&file, fn, FA_OPEN_EXISTING | FA_READ);
          Show_Image();
          USB_OTG_BSP_mDelay(100);
          ret = 0;
//          while((HCD_IsDeviceConnected(&USB_OTG_Core)))// && \
////            (STM_EVAL_PBGetState (BUTTON_KEY) == SET))
//          {
//            Toggle_Leds();
//          }
		  while(key != '1')
		  {
		  	SerialKeyPressed((uint8_t*)&key);
			Toggle_Leds();
		  }
		  key = 0;
          f_close(&file);
          
        }
      }
    }  
  }
  
  #ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
  LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
  LCD_UsrLog("> Disk capacity : %d Bytes\n", USBH_MSC_Param.MSCapacity * \
      USBH_MSC_Param.MSPageLength); 
  USBH_USR_ApplicationState = USH_USR_FS_READLIST;
  return ret;
}
开发者ID:wds315，项目名称:stm32f4_extboard_usb_examples，代码行数:60，代码来源:usbh_usr.c

示例2: HID_InitApplication

/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
  
  /* Configure LED1*/
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}
开发者ID:MrZANE42，项目名称:verisure1512，代码行数:40，代码来源:main.c

示例3: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
    
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  USBH_UsrLog("Starting MSC Demo");
  Menu_Init();
}
开发者ID:451506709，项目名称:automated_machine，代码行数:31，代码来源:main.c

示例4: USBD_USR_Init

/**
* @brief  USBD_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBD_USR_Init(void)
{  
  /* Initialize LEDs */
  STM_EVAL_LEDInit(LED1);
  STM_EVAL_LEDInit(LED2);
  STM_EVAL_LEDInit(LED3);
  STM_EVAL_LEDInit(LED4);   
  
  /* Initialize the LCD */
#if defined (USE_STM322xG_EVAL)
  STM322xG_LCD_Init();
#elif defined(USE_STM324xG_EVAL)
  STM324xG_LCD_Init();
#elif defined (USE_STM3210C_EVAL)
  STM3210C_LCD_Init();
#else
 #error "Missing define: Evaluation board (ie. USE_STM322xG_EVAL)"
#endif
  
  LCD_LOG_Init();
  
#ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS DFU Device");
#else
  LCD_LOG_SetHeader(" USB OTG FS DFU Device");
#endif
  
  LCD_UsrLog("> USB device library started.\n"); 
  LCD_LOG_SetFooter ("     USB Device Library v1.1.0" ); 
  
  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 30, USER_INFORMATION1);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR);
}
开发者ID:Ghanyy，项目名称:PTM-STM32F4，代码行数:41，代码来源:usbd_usr.c

示例5: USBD_USR_Init

/**
* @brief  Displays the message on LCD on device lib initialization
* @param  None
* @retval None
*/
void USBD_USR_Init(void)
{
  /* Initialize LEDs */
  STM_EVAL_LEDInit(LED4);   

  /* Init LCD */
  STM32f4_Discovery_LCD_Init();
  
  LCD_LOG_Init();
  
#ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS MSC Device");
#else
  LCD_LOG_SetHeader(" USB OTG FS MSC Device");
#endif
  LCD_UsrLog("> USB device library started.\n"); 
  LCD_LOG_SetFooter ("     USB Device Library v1.1.0" );
  
  
  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 42, USER_INFORMATION1);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 30, USER_INFORMATION2);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR);  
}
开发者ID:nhaberla，项目名称:stm32f4，代码行数:30，代码来源:usbd_usr.c

示例6: HID_InitApplication

/**
  * @brief  HID application Init
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  HID_MenuInit();
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:30，代码来源:main.c

示例7: DynamicSwitch_InitApplication

/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
    /* Configure Key Button */
    BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);

    /* Configure Joystick in EXTI mode */
    BSP_JOY_Init(JOY_MODE_EXTI);

    /* Configure LED1, LED2, LED3 and LED4 */
    BSP_LED_Init(LED1);
    BSP_LED_Init(LED2);
    BSP_LED_Init(LED3);
    BSP_LED_Init(LED4);

    /* Initialize the LCD */
    BSP_LCD_Init();

    /* Initialize the LCD Log module */
    LCD_LOG_Init();

#ifdef USE_USB_HS
    LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
    LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif

    LCD_UsrLog("USB Host library started.\n");

    /* Start Dynamic Switch Interface */
    LCD_UsrLog("Starting DynamicSwitch Demo\n");
    LCD_UsrLog("Plug your device To Continue...\n");
}
开发者ID:PaxInstruments，项目名称:STM32CubeF4，代码行数:37，代码来源:main.c

示例8: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);

  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);

  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);

  /* Init the LCD Log module */
  LCD_LOG_Init();

#ifdef USE_USB_HS
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif

  LCD_UsrLog("USB Host library started.\n");

  /* Initialize menu and MSC process */
  USBH_UsrLog("Starting MSC Demo");
  Menu_Init();
}
开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:39，代码来源:main.c

示例9: USBH_USR_Init

/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;  
  
  if(startup == 0 )
  {
    startup = 1;
    /* Configure the LEDs */
    STM_EVAL_LEDInit(LED1);
    STM_EVAL_LEDInit(LED2);
    STM_EVAL_LEDInit(LED3); 
    STM_EVAL_LEDInit(LED4); 
    
    STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_GPIO);
    
#ifdef USE_STM3210C_EVAL
    STM3210C_LCD_Init();  
#else
    STM322xG_LCD_Init();
#endif
    LCD_LOG_Init();
#ifdef USE_USB_OTG_HS 
    LCD_LOG_SetHeader(" USB OTG HS HID Host");
#else
    LCD_LOG_SetHeader(" USB OTG FS HID Host");
#endif
    LCD_UsrLog("> USB Host library started.\n"); 
    LCD_LOG_SetFooter ("     USB Host Library v2.0.0" );
  }
}
开发者ID:Seok-Jung，项目名称:STM32F207，代码行数:36，代码来源:usbh_usr.c

示例10: DynamicSwitch_InitApplication

/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                 
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Dynamic Switch Interface */
  LCD_UsrLog("Starting DynamicSwitch Demo\n");
  LCD_UsrLog("Plug your device To Continue...\n");
}
开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:40，代码来源:main.c

示例11: HID_InitApplication

/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}
开发者ID:PaxInstruments，项目名称:STM32CubeF2，代码行数:37，代码来源:main.c

示例12: DUAL_InitApplication

/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}
开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:36，代码来源:main.c

示例13: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MSC Interface */
  USBH_UsrLog("Starting MSC Demo");
  
  Menu_Init();
}
开发者ID:Lembed，项目名称:STM32CubeF1-mirrors，代码行数:34，代码来源:main.c

示例14: CDC_InitApplication

/**
  * @brief  CDC application Init
  * @param  None
  * @retval None
  */
static void CDC_InitApplication(void)
{
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_GPIO);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS CDC Host");
  LCD_UsrLog("USB Host library started.\n"); 
    
  /* Start CDC Interface */
  USBH_UsrLog("Starting CDC Demo");
  
  Menu_Init();
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:32，代码来源:main.c

示例15: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_EXTI);
      
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  Menu_Init();
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:34，代码来源:main.c


注：本文中的LCD_LOG_SetHeader函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。