本文整理汇总了C++中HscxVersion函数的典型用法代码示例。如果您正苦于以下问题：C++ HscxVersion函数的具体用法？C++ HscxVersion怎么用？C++ HscxVersion使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了HscxVersion函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: setup_saphir
int __init
setup_saphir(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, saphir_rev);
printk(KERN_INFO "HiSax: HST Saphir driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_HSTSAPHIR)
return (0);
/* IO-Ports */
cs->hw.saphir.cfg_reg = card->para[1];
cs->hw.saphir.isac = card->para[1] + ISAC_DATA;
cs->hw.saphir.hscx = card->para[1] + HSCX_DATA;
cs->hw.saphir.ale = card->para[1] + ADDRESS_REG;
cs->irq = card->para[0];
if (check_region((cs->hw.saphir.cfg_reg), 6)) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.saphir.cfg_reg,
cs->hw.saphir.cfg_reg + 5);
return (0);
} else
request_region(cs->hw.saphir.cfg_reg,6, "saphir");
printk(KERN_INFO
"HiSax: %s config irq:%d io:0x%X\n",
CardType[cs->typ], cs->irq,
cs->hw.saphir.cfg_reg);
cs->hw.saphir.timer.function = (void *) SaphirWatchDog;
cs->hw.saphir.timer.data = (long) cs;
init_timer(&cs->hw.saphir.timer);
cs->hw.saphir.timer.expires = jiffies + 4*HZ;
add_timer(&cs->hw.saphir.timer);
if (saphir_reset(cs)) {
release_io_saphir(cs);
return (0);
}
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &saphir_card_msg;
cs->irq_func = &saphir_interrupt;
ISACVersion(cs, "saphir:");
if (HscxVersion(cs, "saphir:")) {
printk(KERN_WARNING
"saphir: wrong HSCX versions check IO address\n");
release_io_saphir(cs);
return (0);
}
return (1);
}示例2: setup_sportster
int __init
setup_sportster(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, sportster_revision);
printk(KERN_INFO "HiSax: USR Sportster driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_SPORTSTER)
return (0);
cs->hw.spt.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (!get_io_range(cs))
return (0);
cs->hw.spt.isac = cs->hw.spt.cfg_reg + SPORTSTER_ISAC;
cs->hw.spt.hscx[0] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXA;
cs->hw.spt.hscx[1] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXB;
switch(cs->irq) {
case 5: cs->hw.spt.res_irq = 1;
break;
case 7: cs->hw.spt.res_irq = 2;
break;
case 10:cs->hw.spt.res_irq = 3;
break;
case 11:cs->hw.spt.res_irq = 4;
break;
case 12:cs->hw.spt.res_irq = 5;
break;
case 14:cs->hw.spt.res_irq = 6;
break;
case 15:cs->hw.spt.res_irq = 7;
break;
default:release_io_sportster(cs);
printk(KERN_WARNING "Sportster: wrong IRQ\n");
return(0);
}
printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Sportster_card_msg;
cs->irq_func = &sportster_interrupt;
ISACVersion(cs, "Sportster:");
if (HscxVersion(cs, "Sportster:")) {
printk(KERN_WARNING
"Sportster: wrong HSCX versions check IO address\n");
release_io_sportster(cs);
return (0);
}
return (1);
}示例3: setup_avm_a1_pcmcia
int __devinit
setup_avm_a1_pcmcia(struct IsdnCard *card)
{
u_char model, vers;
struct IsdnCardState *cs = card->cs;
long flags;
char tmp[64];
strcpy(tmp, avm_revision);
printk(KERN_INFO "HiSax: AVM A1 PCMCIA driver Rev. %s\n",
HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_A1_PCMCIA)
return (0);
cs->hw.avm.cfg_reg = card->para[1];
cs->irq = card->para[0];
save_flags(flags);
outb(cs->hw.avm.cfg_reg+ASL1_OFFSET, ASL1_W_ENABLE_S0);
sti();
byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);
HZDELAY(HZ / 5 + 1);
byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,ASL0_W_RESET);
HZDELAY(HZ / 5 + 1);
byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);
byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET, ASL0_W_TDISABLE|ASL0_W_TRESET);
restore_flags(flags);
model = bytein(cs->hw.avm.cfg_reg+MODREG_OFFSET);
vers = bytein(cs->hw.avm.cfg_reg+VERREG_OFFSET);
printk(KERN_INFO "AVM A1 PCMCIA: io 0x%x irq %d model %d version %d\n",
cs->hw.avm.cfg_reg, cs->irq, model, vers);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &AVM_card_msg;
cs->irq_func = &avm_a1p_interrupt;
ISACVersion(cs, "AVM A1 PCMCIA:");
if (HscxVersion(cs, "AVM A1 PCMCIA:")) {
printk(KERN_WARNING
"AVM A1 PCMCIA: wrong HSCX versions check IO address\n");
return (0);
}
return (1);
}示例4: hscxisac_setup
int
hscxisac_setup(struct IsdnCardState *cs, struct dc_hw_ops *isac_ops,
struct bc_hw_ops *hscx_ops)
{
isac_setup(cs, isac_ops);
cs->bc_hw_ops = hscx_ops;
if (HscxVersion(cs, "HiSax:")) {
printk(KERN_WARNING "HiSax: invalid HSCX version\n");
return -ENODEV;
}
return 0;
}示例5: setup_mic
int __init
setup_mic(struct IsdnCard *card)
{
int bytecnt;
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, mic_revision);
printk(KERN_INFO "HiSax: mic driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_MIC)
return (0);
bytecnt = 8;
cs->hw.mic.cfg_reg = card->para[1];
cs->irq = card->para[0];
cs->hw.mic.adr = cs->hw.mic.cfg_reg + MIC_ADR;
cs->hw.mic.isac = cs->hw.mic.cfg_reg + MIC_ISAC;
cs->hw.mic.hscx = cs->hw.mic.cfg_reg + MIC_HSCX;
if (check_region((cs->hw.mic.cfg_reg), bytecnt)) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.mic.cfg_reg,
cs->hw.mic.cfg_reg + bytecnt);
return (0);
} else {
request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn");
}
printk(KERN_INFO
"mic: defined at 0x%x IRQ %d\n",
cs->hw.mic.cfg_reg,
cs->irq);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &mic_card_msg;
cs->irq_func = &mic_interrupt;
ISACVersion(cs, "mic:");
if (HscxVersion(cs, "mic:")) {
printk(KERN_WARNING
"mic: wrong HSCX versions check IO address\n");
release_io_mic(cs);
return (0);
}
return (1);
}示例6: __initfunc
__initfunc(int
setup_ix1micro(struct IsdnCard *card))
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, ix1_revision);
printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_IX1MICROR2)
return (0);
/* IO-Ports */
cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
cs->hw.ix1.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (cs->hw.ix1.cfg_reg) {
if (check_region((cs->hw.ix1.cfg_reg), 4)) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.ix1.cfg_reg,
cs->hw.ix1.cfg_reg + 4);
return (0);
} else
request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg");
}
printk(KERN_INFO
"HiSax: %s config irq:%d io:0x%X\n",
CardType[cs->typ], cs->irq,
cs->hw.ix1.cfg_reg);
ix1_reset(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &ix1_card_msg;
cs->irq_func = &ix1micro_interrupt;
ISACVersion(cs, "ix1-Micro:");
if (HscxVersion(cs, "ix1-Micro:")) {
printk(KERN_WARNING
"ix1-Micro: wrong HSCX versions check IO address\n");
release_io_ix1micro(cs);
return (0);
}
return (1);
}示例7: setup_sedlbauer
//.........这里部分代码省略.........
}
}
/*
* hw.sedl.chip is now properly set
*/
printk(KERN_INFO "Sedlbauer: %s detected\n",
Sedlbauer_Types[cs->subtyp]);
if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
}
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
cs->readisac = &ReadISAC_IPAC;
cs->writeisac = &WriteISAC_IPAC;
cs->readisacfifo = &ReadISACfifo_IPAC;
cs->writeisacfifo = &WriteISACfifo_IPAC;
cs->irq_func = &sedlbauer_interrupt_ipac;
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
reset_sedlbauer(cs);
} else {
/* ISAC_HSCX oder ISAC_ISAR */
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ISAR;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR_RESET_ON;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR_RESET_OFF;
}
cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
test_and_set_bit(HW_ISAR, &cs->HW_Flags);
cs->irq_func = &sedlbauer_interrupt_isar;
cs->auxcmd = &isar_auxcmd;
ISACVersion(cs, "Sedlbauer:");
cs->BC_Read_Reg = &ReadISAR;
cs->BC_Write_Reg = &WriteISAR;
cs->BC_Send_Data = &isar_fill_fifo;
ver = ISARVersion(cs, "Sedlbauer:");
if (ver < 0) {
printk(KERN_WARNING
"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
release_io_sedlbauer(cs);
return (0);
}
} else {
if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
}
cs->irq_func = &sedlbauer_interrupt;
ISACVersion(cs, "Sedlbauer:");
if (HscxVersion(cs, "Sedlbauer:")) {
printk(KERN_WARNING
"Sedlbauer: wrong HSCX versions check IO address\n");
release_io_sedlbauer(cs);
return (0);
}
reset_sedlbauer(cs);
}
}
return (1);
}示例8: setup_telespci
int __devinit
setup_telespci(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
strcpy(tmp, telespci_revision);
;
if (cs->typ != ISDN_CTYPE_TELESPCI)
return (0);
if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
if (pci_enable_device(dev_tel))
return(0);
cs->irq = dev_tel->irq;
if (!cs->irq) {
;
return(0);
}
cs->hw.teles0.membase = ioremap(pci_resource_start(dev_tel, 0),
PAGE_SIZE);
// printk(KERN_INFO "Found: Zoran, base-address: 0x%llx, irq: 0x%x\n",
// (unsigned long long)pci_resource_start(dev_tel, 0),
;
} else {
;
return(0);
}
/* Initialize Zoran PCI controller */
writel(0x00000000, cs->hw.teles0.membase + 0x28);
writel(0x01000000, cs->hw.teles0.membase + 0x28);
writel(0x01000000, cs->hw.teles0.membase + 0x28);
writel(0x7BFFFFFF, cs->hw.teles0.membase + 0x2C);
writel(0x70000000, cs->hw.teles0.membase + 0x3C);
writel(0x61000000, cs->hw.teles0.membase + 0x40);
/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */
// printk(KERN_INFO
// "HiSax: Teles PCI config irq:%d mem:%p\n",
// cs->irq,
;
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &TelesPCI_card_msg;
cs->irq_func = &telespci_interrupt;
cs->irq_flags |= IRQF_SHARED;
ISACVersion(cs, "TelesPCI:");
if (HscxVersion(cs, "TelesPCI:")) {
// printk(KERN_WARNING
;
release_io_telespci(cs);
return (0);
}
return (1);
}示例9: setup_teles3
//.........这里部分代码省略.........
} else {
release_region(cs->hw.teles3.cfg_reg, 8);
}
}
return (0);
} else
request_region(cs->hw.teles3.isac + 32, 32, "HiSax isac");
if (check_region((cs->hw.teles3.hscx[0] + 32), 32)) {
printk(KERN_WARNING
"HiSax: %s hscx A ports %x-%x already in use\n",
CardType[cs->typ],
cs->hw.teles3.hscx[0] + 32,
cs->hw.teles3.hscx[0] + 64);
if (cs->hw.teles3.cfg_reg) {
if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
release_region(cs->hw.teles3.cfg_reg, 1);
} else {
release_region(cs->hw.teles3.cfg_reg, 8);
}
}
release_ioregs(cs, 1);
return (0);
} else
request_region(cs->hw.teles3.hscx[0] + 32, 32, "HiSax hscx A");
if (check_region((cs->hw.teles3.hscx[1] + 32), 32)) {
printk(KERN_WARNING
"HiSax: %s hscx B ports %x-%x already in use\n",
CardType[cs->typ],
cs->hw.teles3.hscx[1] + 32,
cs->hw.teles3.hscx[1] + 64);
if (cs->hw.teles3.cfg_reg) {
if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
release_region(cs->hw.teles3.cfg_reg, 1);
} else {
release_region(cs->hw.teles3.cfg_reg, 8);
}
}
release_ioregs(cs, 3);
return (0);
} else
request_region(cs->hw.teles3.hscx[1] + 32, 32, "HiSax hscx B");
}
if ((cs->hw.teles3.cfg_reg) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA)) {
if ((val = bytein(cs->hw.teles3.cfg_reg + 0)) != 0x51) {
printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
cs->hw.teles3.cfg_reg + 0, val);
release_io_teles3(cs);
return (0);
}
if ((val = bytein(cs->hw.teles3.cfg_reg + 1)) != 0x93) {
printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
cs->hw.teles3.cfg_reg + 1, val);
release_io_teles3(cs);
return (0);
}
val = bytein(cs->hw.teles3.cfg_reg + 2);/* 0x1e=without AB
* 0x1f=with AB
* 0x1c 16.3 ???
* 0x39 16.3 1.1
* 0x38 16.3 1.3
* 0x46 16.3 with AB + Video (Teles-Vision)
*/
if (val != 0x46 && val != 0x39 && val != 0x38 && val != 0x1c && val != 0x1e && val != 0x1f) {
printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
cs->hw.teles3.cfg_reg + 2, val);
release_io_teles3(cs);
return (0);
}
}
printk(KERN_INFO
"HiSax: %s config irq:%d isac:0x%X cfg:0x%X\n",
CardType[cs->typ], cs->irq,
cs->hw.teles3.isac + 32, cs->hw.teles3.cfg_reg);
printk(KERN_INFO
"HiSax: hscx A:0x%X hscx B:0x%X\n",
cs->hw.teles3.hscx[0] + 32, cs->hw.teles3.hscx[1] + 32);
if (reset_teles3(cs)) {
printk(KERN_WARNING "Teles3: wrong IRQ\n");
release_io_teles3(cs);
return (0);
}
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Teles_card_msg;
cs->irq_func = &teles3_interrupt;
ISACVersion(cs, "Teles3:");
if (HscxVersion(cs, "Teles3:")) {
printk(KERN_WARNING
"Teles3: wrong HSCX versions check IO address\n");
release_io_teles3(cs);
return (0);
}
return (1);
}示例10: setup_diva
//.........这里部分代码省略.........
}
if (!cs->irq) {
printk(KERN_WARNING "Diva: No IRQ for PCI card found\n");
return(0);
}
if (!cs->hw.diva.cfg_reg) {
printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
return(0);
}
cs->irq_flags |= SA_SHIRQ;
#else
printk(KERN_WARNING "Diva: cfgreg 0 and NO_PCI_BIOS\n");
printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
return (0);
#endif /* CONFIG_PCI */
if (cs->subtyp == DIVA_IPAC_PCI) {
cs->hw.diva.ctrl = 0;
cs->hw.diva.isac = 0;
cs->hw.diva.hscx = 0;
cs->hw.diva.isac_adr = 0;
cs->hw.diva.hscx_adr = 0;
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
bytecnt = 0;
} else {
cs->hw.diva.ctrl = cs->hw.diva.cfg_reg + DIVA_PCI_CTRL;
cs->hw.diva.isac = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_DATA;
cs->hw.diva.hscx = cs->hw.diva.cfg_reg + DIVA_HSCX_DATA;
cs->hw.diva.isac_adr = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_ADR;
cs->hw.diva.hscx_adr = cs->hw.diva.cfg_reg + DIVA_HSCX_ADR;
bytecnt = 32;
}
}
printk(KERN_INFO
"Diva: %s card configured at %#lx IRQ %d\n",
(cs->subtyp == DIVA_PCI) ? "PCI" :
(cs->subtyp == DIVA_ISA) ? "ISA" :
(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" : "IPAC PCI",
cs->hw.diva.cfg_reg, cs->irq);
if ((cs->subtyp == DIVA_IPAC_PCI) || (cs->subtyp == DIVA_PCI))
printk(KERN_INFO "Diva: %s PCI space at %#lx\n",
(cs->subtyp == DIVA_PCI) ? "PCI" : "IPAC PCI",
cs->hw.diva.pci_cfg);
if (cs->subtyp != DIVA_IPAC_PCI) {
if (check_region(cs->hw.diva.cfg_reg, bytecnt)) {
printk(KERN_WARNING
"HiSax: %s config port %lx-%lx already in use\n",
CardType[card->typ],
cs->hw.diva.cfg_reg,
cs->hw.diva.cfg_reg + bytecnt);
return (0);
} else {
request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn");
}
}
reset_diva(cs);
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Diva_card_msg;
if (cs->subtyp == DIVA_IPAC_ISA) {
cs->readisac = &ReadISAC_IPAC;
cs->writeisac = &WriteISAC_IPAC;
cs->readisacfifo = &ReadISACfifo_IPAC;
cs->writeisacfifo = &WriteISACfifo_IPAC;
cs->irq_func = &diva_irq_ipac_isa;
val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
printk(KERN_INFO "Diva: IPAC version %x\n", val);
} else if (cs->subtyp == DIVA_IPAC_PCI) {
cs->readisac = &MemReadISAC_IPAC;
cs->writeisac = &MemWriteISAC_IPAC;
cs->readisacfifo = &MemReadISACfifo_IPAC;
cs->writeisacfifo = &MemWriteISACfifo_IPAC;
cs->BC_Read_Reg = &MemReadHSCX;
cs->BC_Write_Reg = &MemWriteHSCX;
cs->BC_Send_Data = &Memhscx_fill_fifo;
cs->irq_func = &diva_irq_ipac_pci;
val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
printk(KERN_INFO "Diva: IPAC version %x\n", val);
} else { /* DIVA 2.0 */
cs->hw.diva.tl.function = (void *) diva_led_handler;
cs->hw.diva.tl.data = (long) cs;
init_timer(&cs->hw.diva.tl);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->irq_func = &diva_interrupt;
ISACVersion(cs, "Diva:");
if (HscxVersion(cs, "Diva:")) {
printk(KERN_WARNING
"Diva: wrong HSCX versions check IO address\n");
release_io_diva(cs);
return (0);
}
}
return (1);
}示例11: setup_gazel
int __devinit
setup_gazel(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
u_char val;
strcpy(tmp, gazel_revision);
printk(KERN_INFO "Gazel: Driver Revision %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_GAZEL)
return (0);
if (card->para[0]) {
if (setup_gazelisa(card, cs))
return (0);
} else {
#ifdef CONFIG_PCI_LEGACY
if (setup_gazelpci(cs))
return (0);
#else
printk(KERN_WARNING "Gazel: Card PCI requested and NO_PCI_BIOS, unable to config\n");
return (0);
#endif /* CONFIG_PCI */
}
if (reserve_regions(card, cs)) {
return (0);
}
if (reset_gazel(cs)) {
printk(KERN_WARNING "Gazel: wrong IRQ\n");
release_io_gazel(cs);
return (0);
}
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Gazel_card_msg;
switch (cs->subtyp) {
case R647:
case R685:
cs->irq_func = &gazel_interrupt;
ISACVersion(cs, "Gazel:");
if (HscxVersion(cs, "Gazel:")) {
printk(KERN_WARNING
"Gazel: wrong HSCX versions check IO address\n");
release_io_gazel(cs);
return (0);
}
break;
case R742:
case R753:
cs->irq_func = &gazel_interrupt_ipac;
val = ReadISAC(cs, IPAC_ID - 0x80);
printk(KERN_INFO "Gazel: IPAC version %x\n", val);
break;
}
return (1);
}示例12: setup_ix1micro
int __devinit
setup_ix1micro(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, ix1_revision);
printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_IX1MICROR2)
return (0);
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__FUNCTION__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return(0);
}
break;
} else {
printk(KERN_ERR "ITK PnP: PnP error card found, no device\n");
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
printk(KERN_INFO "ITK PnP: no ISAPnP card found\n");
return(0);
}
}
#endif
/* IO-Ports */
cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
cs->hw.ix1.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (cs->hw.ix1.cfg_reg) {
if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.ix1.cfg_reg,
cs->hw.ix1.cfg_reg + 4);
return (0);
}
}
printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &ix1_card_msg;
cs->irq_func = &ix1micro_interrupt;
ISACVersion(cs, "ix1-Micro:");
if (HscxVersion(cs, "ix1-Micro:")) {
printk(KERN_WARNING
"ix1-Micro: wrong HSCX versions check IO address\n");
release_io_ix1micro(cs);
return (0);
}
return (1);
}示例13: setup_diva_common
static int setup_diva_common(struct IsdnCardState *cs)
{
int bytecnt;
u_char val;
if ((cs->subtyp == DIVA_ISA) || (cs->subtyp == DIVA_IPAC_ISA))
bytecnt = 8;
else
bytecnt = 32;
printk(KERN_INFO
"Diva: %s card configured at %#lx IRQ %d\n",
(cs->subtyp == DIVA_PCI) ? "PCI" :
(cs->subtyp == DIVA_ISA) ? "ISA" :
(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" :
(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
cs->hw.diva.cfg_reg, cs->irq);
if ((cs->subtyp == DIVA_IPAC_PCI) ||
(cs->subtyp == DIVA_IPACX_PCI) ||
(cs->subtyp == DIVA_PCI))
printk(KERN_INFO "Diva: %s space at %#lx\n",
(cs->subtyp == DIVA_PCI) ? "PCI" :
(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
cs->hw.diva.pci_cfg);
if ((cs->subtyp != DIVA_IPAC_PCI) &&
(cs->subtyp != DIVA_IPACX_PCI)) {
if (!request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %lx-%lx already in use\n",
"diva",
cs->hw.diva.cfg_reg,
cs->hw.diva.cfg_reg + bytecnt);
iounmap_diva(cs);
return (0);
}
}
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Diva_card_msg;
setup_isac(cs);
if (cs->subtyp == DIVA_IPAC_ISA) {
cs->readisac = &ReadISAC_IPAC;
cs->writeisac = &WriteISAC_IPAC;
cs->readisacfifo = &ReadISACfifo_IPAC;
cs->writeisacfifo = &WriteISACfifo_IPAC;
cs->irq_func = &diva_irq_ipac_isa;
val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
printk(KERN_INFO "Diva: IPAC version %x\n", val);
} else if (cs->subtyp == DIVA_IPAC_PCI) {
cs->readisac = &MemReadISAC_IPAC;
cs->writeisac = &MemWriteISAC_IPAC;
cs->readisacfifo = &MemReadISACfifo_IPAC;
cs->writeisacfifo = &MemWriteISACfifo_IPAC;
cs->BC_Read_Reg = &MemReadHSCX;
cs->BC_Write_Reg = &MemWriteHSCX;
cs->BC_Send_Data = &Memhscx_fill_fifo;
cs->irq_func = &diva_irq_ipac_pci;
val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
printk(KERN_INFO "Diva: IPAC version %x\n", val);
} else if (cs->subtyp == DIVA_IPACX_PCI) {
cs->readisac = &MemReadISAC_IPACX;
cs->writeisac = &MemWriteISAC_IPACX;
cs->readisacfifo = &MemReadISACfifo_IPACX;
cs->writeisacfifo = &MemWriteISACfifo_IPACX;
cs->BC_Read_Reg = &MemReadHSCX_IPACX;
cs->BC_Write_Reg = &MemWriteHSCX_IPACX;
cs->BC_Send_Data = NULL; // function located in ipacx module
cs->irq_func = &diva_irq_ipacx_pci;
printk(KERN_INFO "Diva: IPACX Design Id: %x\n",
MemReadISAC_IPACX(cs, IPACX_ID) & 0x3F);
} else { /* DIVA 2.0 */
setup_timer(&cs->hw.diva.tl, (void *)diva_led_handler,
(long)cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->irq_func = &diva_interrupt;
ISACVersion(cs, "Diva:");
if (HscxVersion(cs, "Diva:")) {
printk(KERN_WARNING
"Diva: wrong HSCX versions check IO address\n");
release_io_diva(cs);
return (0);
}
}
return (1);
}示例14: setup_asuscom
int __init
setup_asuscom(struct IsdnCard *card)
{
int bytecnt;
struct IsdnCardState *cs = card->cs;
u_char val;
char tmp[64];
strcpy(tmp, Asuscom_revision);
printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_ASUSCOM)
return (0);
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__FUNCTION__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return(0);
}
break;
} else {
printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
return(0);
}
}
#endif
bytecnt = 8;
cs->hw.asus.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.asus.cfg_reg,
cs->hw.asus.cfg_reg + bytecnt);
return (0);
}
printk(KERN_INFO "ISDNLink: defined at 0x%x IRQ %d\n",
cs->hw.asus.cfg_reg, cs->irq);
setup_isac(cs);
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Asus_card_msg;
val = readreg(cs->hw.asus.cfg_reg + ASUS_IPAC_ALE,
cs->hw.asus.cfg_reg + ASUS_IPAC_DATA, IPAC_ID);
if ((val == 1) || (val == 2)) {
cs->subtyp = ASUS_IPAC;
cs->hw.asus.adr = cs->hw.asus.cfg_reg + ASUS_IPAC_ALE;
cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
cs->readisac = &ReadISAC_IPAC;
cs->writeisac = &WriteISAC_IPAC;
cs->readisacfifo = &ReadISACfifo_IPAC;
cs->writeisacfifo = &WriteISACfifo_IPAC;
cs->irq_func = &asuscom_interrupt_ipac;
printk(KERN_INFO "Asus: IPAC version %x\n", val);
} else {
cs->subtyp = ASUS_ISACHSCX;
cs->hw.asus.adr = cs->hw.asus.cfg_reg + ASUS_ADR;
cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_ISAC;
cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_HSCX;
cs->hw.asus.u7 = cs->hw.asus.cfg_reg + ASUS_CTRL_U7;
cs->hw.asus.pots = cs->hw.asus.cfg_reg + ASUS_CTRL_POTS;
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->irq_func = &asuscom_interrupt;
ISACVersion(cs, "ISDNLink:");
if (HscxVersion(cs, "ISDNLink:")) {
//.........这里部分代码省略.........
示例15: setup_diva
//.........这里部分代码省略.........
return (0);
#endif /* CONFIG_PCI */
if ((cs->subtyp == DIVA_IPAC_PCI) ||
(cs->subtyp == DIVA_IPACX_PCI) ) {
cs->hw.diva.ctrl = 0;
cs->hw.diva.isac = 0;
cs->hw.diva.hscx = 0;
cs->hw.diva.isac_adr = 0;
cs->hw.diva.hscx_adr = 0;
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
bytecnt = 0;
} else {
cs->hw.diva.ctrl = cs->hw.diva.cfg_reg + DIVA_PCI_CTRL;
cs->hw.diva.isac = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_DATA;
cs->hw.diva.hscx = cs->hw.diva.cfg_reg + DIVA_HSCX_DATA;
cs->hw.diva.isac_adr = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_ADR;
cs->hw.diva.hscx_adr = cs->hw.diva.cfg_reg + DIVA_HSCX_ADR;
bytecnt = 32;
}
}
ready:
printk(KERN_INFO
"Diva: %s card configured at %#lx IRQ %d\n",
(cs->subtyp == DIVA_PCI) ? "PCI" :
(cs->subtyp == DIVA_ISA) ? "ISA" :
(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" :
(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
cs->hw.diva.cfg_reg, cs->irq);
if ((cs->subtyp == DIVA_IPAC_PCI) ||
(cs->subtyp == DIVA_IPACX_PCI) ||
(cs->subtyp == DIVA_PCI) )
printk(KERN_INFO "Diva: %s space at %#lx\n",
(cs->subtyp == DIVA_PCI) ? "PCI" :
(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
cs->hw.diva.pci_cfg);
if ((cs->subtyp != DIVA_IPAC_PCI) &&
(cs->subtyp != DIVA_IPACX_PCI) ) {
if (!request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %lx-%lx already in use\n",
CardType[card->typ],
cs->hw.diva.cfg_reg,
cs->hw.diva.cfg_reg + bytecnt);
return (0);
}
}
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Diva_card_msg;
setup_isac(cs);
if (cs->subtyp == DIVA_IPAC_ISA) {
cs->readisac = &ReadISAC_IPAC;
cs->writeisac = &WriteISAC_IPAC;
cs->readisacfifo = &ReadISACfifo_IPAC;
cs->writeisacfifo = &WriteISACfifo_IPAC;
cs->irq_func = &diva_irq_ipac_isa;
val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
printk(KERN_INFO "Diva: IPAC version %x\n", val);
} else if (cs->subtyp == DIVA_IPAC_PCI) {
cs->readisac = &MemReadISAC_IPAC;
cs->writeisac = &MemWriteISAC_IPAC;
cs->readisacfifo = &MemReadISACfifo_IPAC;
cs->writeisacfifo = &MemWriteISACfifo_IPAC;
cs->BC_Read_Reg = &MemReadHSCX;
cs->BC_Write_Reg = &MemWriteHSCX;
cs->BC_Send_Data = &Memhscx_fill_fifo;
cs->irq_func = &diva_irq_ipac_pci;
val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
printk(KERN_INFO "Diva: IPAC version %x\n", val);
} else if (cs->subtyp == DIVA_IPACX_PCI) {
cs->readisac = &MemReadISAC_IPACX;
cs->writeisac = &MemWriteISAC_IPACX;
cs->readisacfifo = &MemReadISACfifo_IPACX;
cs->writeisacfifo = &MemWriteISACfifo_IPACX;
cs->BC_Read_Reg = &MemReadHSCX_IPACX;
cs->BC_Write_Reg = &MemWriteHSCX_IPACX;
cs->BC_Send_Data = NULL; // function located in ipacx module
cs->irq_func = &diva_irq_ipacx_pci;
printk(KERN_INFO "Diva: IPACX Design Id: %x\n",
MemReadISAC_IPACX(cs, IPACX_ID) &0x3F);
} else { /* DIVA 2.0 */
cs->hw.diva.tl.function = (void *) diva_led_handler;
cs->hw.diva.tl.data = (long) cs;
init_timer(&cs->hw.diva.tl);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->irq_func = &diva_interrupt;
ISACVersion(cs, "Diva:");
if (HscxVersion(cs, "Diva:")) {
printk(KERN_WARNING
"Diva: wrong HSCX versions check IO address\n");
release_io_diva(cs);
return (0);
}
}
return (1);
}