当前位置: 首页>>代码示例>>C++>>正文

C++ HAL_TIM_Base_Init函数代码示例

本文整理汇总了C++中HAL_TIM_Base_Init函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_TIM_Base_Init函数的具体用法？C++ HAL_TIM_Base_Init怎么用？C++ HAL_TIM_Base_Init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了HAL_TIM_Base_Init函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: TIM_Config

/**
  * @brief  TIM configuration
  * @param  None
  * @retval None
  */
static void TIM_Config(void)
{
  TIM_MasterConfigTypeDef sMasterConfig;

  /* Time Base configuration */
  htim.Instance = TIMx;

  htim.Init.Period = 3600;
  htim.Init.Prescaler = 0;
  htim.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim.Init.RepetitionCounter = 0x0;

  if (HAL_TIM_Base_Init(&htim) != HAL_OK)
  {
    /* Timer Initiliazation Error */
    Error_Handler();
  }

  /* Timer TRGO selection */
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;

  if (HAL_TIMEx_MasterConfigSynchronization(&htim, &sMasterConfig) != HAL_OK)
  {
    /* Timer TRGO selection Error */
    Error_Handler();
  }
}
开发者ID:afconsult-south，项目名称:dragonfly-fcb，代码行数:34，代码来源:main.c

示例2: SC_TIM3_Init

/* TIM3 init function */
void SC_TIM3_Init(SERVO_CONTROLLER_Frequency frequency)
{

  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim3.Instance = TIM3;
  htim3.Init.Prescaler = CORE_FCLK / TIM_FCLK - 1;
  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim3.Init.Period = (uint16_t)(TIM_FCLK / frequency);   //should not exceed 0xFFFF
  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim3);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig);

  HAL_TIM_PWM_Init(&htim3);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2);

  HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3);

}
开发者ID:itsergeyla，项目名称:Quadruped，代码行数:35，代码来源:ServoController.c

示例3: MX_TIM2_Init

/* TIM2 init function */
void MX_TIM2_Init(void)
{

  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;

  htim2.Instance = TIM2;
  htim2.Init.Prescaler = 1;
  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim2.Init.Period = 875;
  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim2.Init.RepetitionCounter = 0;
  HAL_TIM_Base_Init(&htim2);
  // Initialize interrupt triggering
//  HAL_NVIC_EnableIRQ(TIM2_IRQn);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig);
  if (HAL_TIM_Base_Start_IT(&htim2) != HAL_OK) {
      while(1);
  }

}
开发者ID:mondaugen，项目名称:stm32-analogue-io-timer，代码行数:28，代码来源:main.c

示例4: time2_init

void time2_init(void)
{

	  TIM_ClockConfigTypeDef sClockSourceConfig;
//	  GPIO_InitTypeDef GPIO_InitStruct;
	
	
	  htim2.Instance = TIM2;
	  htim2.Init.Prescaler = 84 - 1;	  //1us
	  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
	  htim2.Init.Period = 1000-1;			  //10us
	  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
	  htim2.Init.RepetitionCounter = 0;
	  HAL_TIM_Base_Init(&htim2);
	
	  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
	  HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig);


#if 0
  /* GPIO Ports Clock Enable */
  __GPIOC_CLK_ENABLE();

    GPIO_InitStruct.Pin = GPIO_PIN_0;
    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
	 GPIO_InitStruct.Pull = GPIO_NOPULL;
    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
#endif
}
开发者ID:glocklueng，项目名称:stm32f407_aoa，代码行数:30，代码来源:time.c

示例5: startPerEvent

/* --- Load and start periodic event counter --- */
void startPerEvent(uint32_t rateFactor)
{
	htim2.Init.Period = rateFactor;
	HAL_TIM_Base_Init(&htim2);

	HAL_TIM_Base_Start_IT(&htim2);		
}
开发者ID:OUWECAD，项目名称:MOWE，代码行数:8，代码来源:aos.c

示例6: MX_TIM2_Init

/* TIM2 init function */
static void MX_TIM2_Init(void)
{

  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;

  htim2.Instance = TIM2;
  htim2.Init.Prescaler = 84;
  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim2.Init.Period = 1000000;
  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
  {
    Error_Handler();
  }

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
  {
    Error_Handler();
  }

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }

}
开发者ID:FunkyFlier，项目名称:HAL_UART_IT，代码行数:31，代码来源:main.c

示例7: Timer_For_Main_Loop_Init

void Timer_For_Main_Loop_Init()
{
	__TIM6_CLK_ENABLE();
  /* Compute the prescaler value to have TIMx counter clock equal to 1 KHz */
  uwPrescalerValue = (uint32_t) ((SystemCoreClock / 1000) - 1);
  
  /*##-1- Configure the TIM peripheral #######################################*/ 
  /* Set TIMx instance */
  TimHandle.Instance = TIM6;
    
  /* Initialize TIMx peripheral as follow:
       + Period = 10000 - 1
       + Prescaler = SystemCoreClock/10000 Note that APB clock = TIMx clock if
                     APB prescaler = 1.
       + ClockDivision = 0
       + Counter direction = Up
  */
  TimHandle.Init.Period = 10000 - 1;
  TimHandle.Init.Prescaler = uwPrescalerValue;
  TimHandle.Init.ClockDivision = 0;
  TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
  HAL_TIM_Base_Init(&TimHandle);

  /*##-2- Start the TIM Base generation in interrupt mode ####################*/
  /* Start Channel1 */
  HAL_TIM_Base_Start_IT(&TimHandle);
	HAL_NVIC_EnableIRQ(TIM6_IRQn);
}
开发者ID:spoyler，项目名称:gps，代码行数:28，代码来源:watchdog.c

示例8: MX_TIM4_Init

/* TIM4 init function */
void MX_TIM4_Init(void)
{
  TIM_SlaveConfigTypeDef sSlaveConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim4.Instance = TIM4;
  htim4.Init.Prescaler = 0;
  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim4.Init.Period = 0;
  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim4);

  HAL_TIM_PWM_Init(&htim4);

  HAL_TIM_OnePulse_Init(&htim4, TIM_OPMODE_SINGLE);

  sSlaveConfig.SlaveMode = TIM_SLAVEMODE_EXTERNAL1;
  sSlaveConfig.InputTrigger = TIM_TS_ITR0;
  HAL_TIM_SlaveConfigSynchronization(&htim4, &sSlaveConfig);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_MspPostInit(&htim4);

}
开发者ID:prime5711，项目名称:STM32F4_Example，代码行数:35，代码来源:tim.c

示例9: TIMx_BUZZER_Init

/**
 * @brief Initialization
 */
void TIMx_BUZZER_Init() {
	globalBuzzerTick = 0;
	/* Configure timer */
	BuzzerTimHandle.Instance = TIMx_BUZZER;

	BuzzerTimHandle.Init.Prescaler = 0; // (84 Mhz)
	BuzzerTimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
	BuzzerTimHandle.Init.Period = TIMx_BUZZER_PERIOD - 1;
	BuzzerTimHandle.Init.ClockDivision = 0;

	if (HAL_TIM_Base_Init(&BuzzerTimHandle) != HAL_OK) {
		//Error
	}

	GPIO_InitTypeDef GPIO_Init;

	// Enable peripheral clock
	BUZZER_CLK_ENABLE();

	GPIO_Init.Pin = BUZZER_PIN;
	GPIO_Init.Mode = GPIO_MODE_OUTPUT_PP;
	GPIO_Init.Pull = GPIO_PULLUP;
	GPIO_Init.Speed = GPIO_SPEED_FAST;
	HAL_GPIO_Init(BUZZER_PORT, &GPIO_Init);

	HAL_GPIO_WritePin(BUZZER_PORT, BUZZER_PIN, GPIO_PIN_RESET);
}
开发者ID:giovadifiore，项目名称:iot-home-automation，代码行数:30，代码来源:stm32f4xx_helper_buzzer.c

示例10: MX_TIM3_Init

/* TIM3 init function */
void MX_TIM3_Init(void)
{
  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_IC_InitTypeDef sConfigIC;

  htim3.Instance = TIM3;
  htim3.Init.Prescaler = 71;
  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim3.Init.Period = 0xffff;
  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim3);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig);

  HAL_TIM_IC_Init(&htim3);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig);

  sConfigIC.ICPolarity = TIM_INPUTCHANNELPOLARITY_FALLING;
  sConfigIC.ICSelection = TIM_ICSELECTION_DIRECTTI;
  sConfigIC.ICPrescaler = TIM_ICPSC_DIV1;
  sConfigIC.ICFilter = 0;
  HAL_TIM_IC_ConfigChannel(&htim3, &sConfigIC, TIM_CHANNEL_4);

}
开发者ID:yusp75，项目名称:pellet-stove-control，代码行数:30，代码来源:tim.c

示例11: TIM_Config

/**
  * @brief  TIM configuration
  * @param  None
  * @retval None
  */
static void TIM_Config(void)
{
  TIM_MasterConfigTypeDef master_timer_config;
  RCC_ClkInitTypeDef clk_init_struct = {0};       /* Temporary variable to retrieve RCC clock configuration */
  uint32_t latency;                               /* Temporary variable to retrieve Flash Latency */
  
  uint32_t timer_clock_frequency = 0;             /* Timer clock frequency */
 // uint32_t timer_prescaler = 0;                   /* Time base prescaler to have timebase aligned on minimum frequency possible */
  uint32_t timer_prescaler = 10;
  /* Configuration of timer as time base:                                     */ 
  /* Caution: Computation of frequency is done for a timer instance on APB1   */
  /*          (clocked by PCLK1)                                              */
  /* Timer period can be adjusted by modifying the following constants:       */
  /* - TIMER_FREQUENCY: timer frequency (unit: Hz).                           */
  /* - TIMER_FREQUENCY_RANGE_MIN: timer minimum frequency (unit: Hz).         */
  
  /* Retrieve timer clock source frequency */
  HAL_RCC_GetClockConfig(&clk_init_struct, &latency);
  /* If APB1 prescaler is different of 1, timers have a factor x2 on their    */
  /* clock source.                                                            */
  if (clk_init_struct.APB1CLKDivider == RCC_HCLK_DIV1)
  {
    timer_clock_frequency = HAL_RCC_GetPCLK1Freq();
  }
  else
  {
    timer_clock_frequency = HAL_RCC_GetPCLK1Freq() *2;
  }
  
  /* Timer prescaler calculation */
  /* (computation for timer 16 bits, additional + 1 to round the prescaler up) */
  timer_prescaler = (timer_clock_frequency / (TIMER_PRESCALER_MAX_VALUE * TIMER_FREQUENCY_RANGE_MIN)) +1;
  
  /* Set timer instance */
  TimHandle.Instance = TIMx;
  
  /* Configure timer parameters */
  TimHandle.Init.Period            = ((timer_clock_frequency / (timer_prescaler * TIMER_FREQUENCY)) - 1);
  TimHandle.Init.Prescaler         = (timer_prescaler - 1);
  TimHandle.Init.ClockDivision     = TIM_CLOCKDIVISION_DIV1;
  TimHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
  TimHandle.Init.RepetitionCounter = 0x0;
  
  if (HAL_TIM_Base_Init(&TimHandle) != HAL_OK)
  {
    /* Timer initialization Error */
    Error_Handler();
  }

  /* Timer TRGO selection */
  master_timer_config.MasterOutputTrigger = TIM_TRGO_UPDATE;
  master_timer_config.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;

  if (HAL_TIMEx_MasterConfigSynchronization(&TimHandle, &master_timer_config) != HAL_OK)
  {
    /* Timer TRGO selection Error */
    Error_Handler();
  }
  
}
开发者ID:salinraj，项目名称:NIBP，代码行数:65，代码来源:AdcRead.c

示例12: us_ticker_init

void us_ticker_init(void)
{

    if (us_ticker_inited) return;
    us_ticker_inited = 1;

    // Enable timer clock
    TIM_MST_RCC;

    // Configure time base
    TimMasterHandle.Instance = TIM_MST;
    TimMasterHandle.Init.Period        = 0xFFFF;
    TimMasterHandle.Init.Prescaler         = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 �s tick
    TimMasterHandle.Init.ClockDivision     = 0;
    TimMasterHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
    HAL_TIM_Base_Init(&TimMasterHandle);

    // Configure interrupts
    __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_UPDATE);

    // Update interrupt used for 32-bit counter
    NVIC_SetVector(TIM_MST_UP_IRQ, (uint32_t)tim_update_irq_handler);
    NVIC_EnableIRQ(TIM_MST_UP_IRQ);

    // Output compare interrupt used for timeout feature
    NVIC_SetVector(TIM_MST_OC_IRQ, (uint32_t)tim_oc_irq_handler);
    NVIC_EnableIRQ(TIM_MST_OC_IRQ);

    // Enable timer
    HAL_TIM_Base_Start(&TimMasterHandle);
}
开发者ID:ban4jp，项目名称:mbed，代码行数:31，代码来源:us_ticker.c

示例13: MX_TIM9_Init

/* TIM9 init function */
void MX_TIM9_Init(void)
{
  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim9.Instance = TIM9;
  htim9.Init.Prescaler = 167;
  htim9.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim9.Init.Period = 19999;
  htim9.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim9);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim9, &sClockSourceConfig);

  HAL_TIM_PWM_Init(&htim9);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 1500;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim9, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_PWM_ConfigChannel(&htim9, &sConfigOC, TIM_CHANNEL_2);

}
开发者ID:dokor，项目名称:RobotCarto，代码行数:27，代码来源:tim.c

示例14: TIM_Config

/**
  * @brief  TIM_Config: Configure TIMusb timer
  * @param  None.
  * @retval None
  */
static void TIM_Config(void)
{  
  /* Set TIMusb instance */
  TimHandle.Instance = TIMusb;
  
  /* Initialize TIMx peripheral as follow:
       + Period = 10000 - 1
       + Prescaler = ((SystemCoreClock/2)/10000) - 1
       + ClockDivision = 0
       + Counter direction = Up
  */
  TimHandle.Init.Period = (CDC_POLLING_INTERVAL*1000) - 1;
  TimHandle.Init.Prescaler = 84-1;
  TimHandle.Init.ClockDivision = 0;
  TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
  if(HAL_TIM_Base_Init(&TimHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }
  
  /*##-6- Enable TIM peripherals Clock #######################################*/
  TIMx_CLK_ENABLE();
  
  /*##-7- Configure the NVIC for TIMx ########################################*/
  /* Set Interrupt Group Priority */ 
  HAL_NVIC_SetPriority(TIMx_IRQn, 6, 0);
  
  /* Enable the TIMx global Interrupt */
  HAL_NVIC_EnableIRQ(TIMx_IRQn);
}
开发者ID:mmiers，项目名称:betaflight，代码行数:36，代码来源:usbd_cdc_interface.c

示例15: MX_TIM2_Init

/* TIM2 init function */
void MX_TIM2_Init(void)
{

  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim2.Instance = TIM2;
  htim2.Init.Prescaler = 0;
  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim2.Init.Period = 47;
  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim2);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig);

  HAL_TIM_PWM_Init(&htim2);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4);

  HAL_TIM_MspPostInit(&htim2);

}
开发者ID:yingwang88，项目名称:StmSmoke，代码行数:35，代码来源:main.c


注：本文中的HAL_TIM_Base_Init函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。