当前位置: 首页>>代码示例>>C++>>正文

C++ HAL_TIMEx_MasterConfigSynchronization函数代码示例

本文整理汇总了C++中HAL_TIMEx_MasterConfigSynchronization函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_TIMEx_MasterConfigSynchronization函数的具体用法？C++ HAL_TIMEx_MasterConfigSynchronization怎么用？C++ HAL_TIMEx_MasterConfigSynchronization使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了HAL_TIMEx_MasterConfigSynchronization函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: MX_TIM3_Init

/* TIM3 init function */
void MX_TIM3_Init(void)
{

  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim3.Instance = TIM3;
  htim3.Init.Prescaler = 0;
  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim3.Init.Period = 0;
  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim3);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig);

  HAL_TIM_PWM_Init(&htim3);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3);

}
开发者ID:janhieber，项目名称:HTWAA_car_32b，代码行数:31，代码来源:main.c

示例2: MX_TIM1_Init

void MX_TIM1_Init(void) {
  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_SlaveConfigTypeDef sSlaveConfig;

  htim1.Instance = TIM1;
  htim1.Init.Prescaler = 47999;
  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim1.Init.Period = 249;
  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim1.Init.RepetitionCounter = 0;
  HAL_TIM_Base_Init(&htim1);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig);

  sSlaveConfig.SlaveMode = TIM_SLAVEMODE_TRIGGER;
  sSlaveConfig.InputTrigger = TIM_TS_TI1FP1;
  sSlaveConfig.TriggerPolarity = TIM_TRIGGERPOLARITY_RISING;
  sSlaveConfig.TriggerFilter = 15;
  HAL_TIM_SlaveConfigSynchronization(&htim1, &sSlaveConfig);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_ENABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig);
}
开发者ID:moleculesynth，项目名称:mastering-stm32，代码行数:26，代码来源:main-ex5.c

示例3: MX_TIM21_Init

/* TIM21 init function */
void MX_TIM21_Init(void)
{

  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim21.Instance = TIM21;
  htim21.Init.Prescaler = 0;
  htim21.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim21.Init.Period = TIM_PERIOD;
  htim21.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_PWM_Init(&htim21);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim21, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 500;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;

  HAL_TIM_PWM_ConfigChannel(&htim21, &sConfigOC, TIM_CHANNEL_1);
  HAL_TIM_PWM_ConfigChannel(&htim21, &sConfigOC, TIM_CHANNEL_2);

}
开发者ID:awdensmore，项目名称:bat-ager，代码行数:27，代码来源:main.c

示例4: MX_TIM3_Init

/* TIM3 init function */
void MX_TIM3_Init(void)
{
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;
	
	uint32_t uhPrescalerValue = (uint32_t) ((SystemCoreClock /2) / 1300) - 1;


  htim3.Instance = TIM3;
  htim3.Init.Prescaler = uhPrescalerValue;
  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim3.Init.Period = PERIOD_VALUE;
  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_PWM_Init(&htim3);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = PULSE1_VALUE;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_MspPostInit(&htim3);

}
开发者ID:hlmpost，项目名称:st-nordic-3-11，代码行数:29，代码来源:tim.c

示例5: MX_TIM5_Init

/* TIM5 init function */
void MX_TIM5_Init(void)
{
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_IC_InitTypeDef sConfigIC;
  TIM_OC_InitTypeDef sConfigOC;

  htim5.Instance = TIM5;
  htim5.Init.Prescaler = 0;
  htim5.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim5.Init.Period = 8400000 * 5; // 500 ms
  htim5.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_IC_Init(&htim5);

  HAL_TIM_PWM_Init(&htim5);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim5, &sMasterConfig);

  sConfigIC.ICPolarity = TIM_INPUTCHANNELPOLARITY_BOTHEDGE;
  sConfigIC.ICSelection = TIM_ICSELECTION_DIRECTTI;
  sConfigIC.ICPrescaler = TIM_ICPSC_DIV1;
  sConfigIC.ICFilter = 0;
  HAL_TIM_IC_ConfigChannel(&htim5, &sConfigIC, TIM_CHANNEL_1);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 840;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim5, &sConfigOC, TIM_CHANNEL_2);

  HAL_TIM_MspPostInit(&htim5);

}
开发者ID:Vadim-Stupakov，项目名称:ProjectX，代码行数:35，代码来源:tim.c

示例6: MX_TIM4_Init

/* TIM4 init function */
void MX_TIM4_Init(void)
{
  TIM_SlaveConfigTypeDef sSlaveConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim4.Instance = TIM4;
  htim4.Init.Prescaler = 0;
  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim4.Init.Period = 0;
  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim4);

  HAL_TIM_PWM_Init(&htim4);

  HAL_TIM_OnePulse_Init(&htim4, TIM_OPMODE_SINGLE);

  sSlaveConfig.SlaveMode = TIM_SLAVEMODE_EXTERNAL1;
  sSlaveConfig.InputTrigger = TIM_TS_ITR0;
  HAL_TIM_SlaveConfigSynchronization(&htim4, &sSlaveConfig);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_MspPostInit(&htim4);

}
开发者ID:prime5711，项目名称:STM32F4_Example，代码行数:35，代码来源:tim.c

示例7: BSP_AUDIO_IN_Record

/**
  * @brief  Start audio recording
  * @param  pbuf Main buffer pointer for the recorded data storing  
  * @param  size Current size of the recorded buffer
  * @retval AUDIO_OK if correct communication, else wrong communication
  */
uint8_t BSP_AUDIO_IN_Record(uint16_t* pbuf, uint32_t size)
{
  uint32_t                ret = AUDIO_OK;
  TIM_MasterConfigTypeDef master_config = {0};

  if (HAL_ADC_Start_DMA(&hAudioInAdc, (uint32_t*)pbuf, size) == HAL_OK)
  {
    master_config.MasterOutputTrigger = TIM_TRGO_UPDATE;
    master_config.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
    
    HAL_TIMEx_MasterConfigSynchronization(&hAudioInTim3, &master_config);
    
    /* Start the time base triggering the ADC */
    if (HAL_TIM_Base_Start(&hAudioInTim3) != HAL_OK)
    {
      ret = AUDIO_ERROR;
    }
  }
  else
  {
    ret = AUDIO_ERROR;
  }
  
  return ret;
}
开发者ID:ryankurte，项目名称:stm32f4-base，代码行数:31，代码来源:stm32l152d_eval_audio.c

示例8: MX_TIM4_Init

/* TIM4 init function */
void MX_TIM4_Init(void)
{
  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;

  htim4.Instance = TIM4;
  htim4.Init.Prescaler = 32000;
  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim4.Init.Period = 1000;
  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  if (HAL_TIM_Base_Init(&htim4) != HAL_OK)
  {
    Error_Handler();
  }

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  if (HAL_TIM_ConfigClockSource(&htim4, &sClockSourceConfig) != HAL_OK)
  {
    Error_Handler();
  }

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }

}
开发者ID:outsidersdelaelectronica，项目名称:tiic-2015，代码行数:30，代码来源:tim.c

示例9: TIM6_Config

/**
  * @brief  TIM6 Configuration
  * @note   TIM6 configuration is based on APB1 frequency
  * @note   TIM6 Update event occurs each TIM6CLK/256
  * @param  None
  * @retval None
  */
void TIM6_Config(void)
{
  static TIM_HandleTypeDef  htim;
  TIM_MasterConfigTypeDef sMasterConfig;

  /*##-1- Configure the TIM peripheral #######################################*/
  /* Time base configuration */
  htim.Instance = TIM6;

  htim.Init.Period            = 0x7FF;
  htim.Init.Prescaler         = 0;
  htim.Init.ClockDivision     = 0;
  htim.Init.CounterMode       = TIM_COUNTERMODE_UP;
  htim.Init.RepetitionCounter = 0;
  HAL_TIM_Base_Init(&htim);

  /* TIM6 TRGO selection */
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;

  HAL_TIMEx_MasterConfigSynchronization(&htim, &sMasterConfig);

  /*##-2- Enable TIM peripheral counter ######################################*/
  HAL_TIM_Base_Start(&htim);
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:32，代码来源:main.c

示例10: TIM_Config

/**
  * @brief  TIM configuration
  * @param  None
  * @retval None
  */
static void TIM_Config(void)
{
  TIM_MasterConfigTypeDef sMasterConfig;
    
  /* Time Base configuration */
  htim.Instance = TIMx;
  
  htim.Init.Period = 0x3C;          
  htim.Init.Prescaler = 0;       
  htim.Init.ClockDivision = 0;    
  htim.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim.Init.RepetitionCounter = 0x0;
  
  if(HAL_TIM_Base_Init(&htim) != HAL_OK)
  {
    /* TIM8 Initialization Error */
    Error_Handler();
  }
   
  /* TIM8 TRGO selection */
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
    
  if(HAL_TIMEx_MasterConfigSynchronization(&htim, &sMasterConfig) != HAL_OK)
  {
    /* TIM8 TRGO selection Error */
    Error_Handler();
  }
}
开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:34，代码来源:main.c

示例11: SC_TIM3_Init

/* TIM3 init function */
void SC_TIM3_Init(SERVO_CONTROLLER_Frequency frequency)
{

  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim3.Instance = TIM3;
  htim3.Init.Prescaler = CORE_FCLK / TIM_FCLK - 1;
  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim3.Init.Period = (uint16_t)(TIM_FCLK / frequency);   //should not exceed 0xFFFF
  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim3);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig);

  HAL_TIM_PWM_Init(&htim3);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2);

  HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3);

}
开发者ID:itsergeyla，项目名称:Quadruped，代码行数:35，代码来源:ServoController.c

示例12: MX_TIM1_Init

/* TIM1 init function */
void MX_TIM1_Init(void)
{

  TIM_Encoder_InitTypeDef sConfig;
  TIM_MasterConfigTypeDef sMasterConfig;

  htim1.Instance = TIM1;
  htim1.Init.Prescaler = 0;
  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim1.Init.Period = 0;
  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  htim1.Init.RepetitionCounter = 0;
  sConfig.EncoderMode = TIM_ENCODERMODE_TI1;
  sConfig.IC1Polarity = TIM_ICPOLARITY_RISING;
  sConfig.IC1Selection = TIM_ICSELECTION_DIRECTTI;
  sConfig.IC1Prescaler = TIM_ICPSC_DIV1;
  sConfig.IC1Filter = 0;
  sConfig.IC2Polarity = TIM_ICPOLARITY_RISING;
  sConfig.IC2Selection = TIM_ICSELECTION_DIRECTTI;
  sConfig.IC2Prescaler = TIM_ICPSC_DIV1;
  sConfig.IC2Filter = 0;
  HAL_TIM_Encoder_Init(&htim1, &sConfig);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig);

}
开发者ID:ilyaseeyousoon，项目名称:stm32f030k6_encoder，代码行数:29，代码来源:main.c

示例13: TIMx_Config

STATIC uint32_t TIMx_Config(mp_obj_t timer) {
    // TRGO selection to trigger DAC
    TIM_HandleTypeDef *tim = pyb_timer_get_handle(timer);
    TIM_MasterConfigTypeDef config;
    config.MasterOutputTrigger = TIM_TRGO_UPDATE;
    config.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
    HAL_TIMEx_MasterConfigSynchronization(tim, &config);

    // work out the trigger channel (only certain ones are supported)
    if (tim->Instance == TIM2) {
        return DAC_TRIGGER_T2_TRGO;
    } else if (tim->Instance == TIM4) {
        return DAC_TRIGGER_T4_TRGO;
    } else if (tim->Instance == TIM5) {
        return DAC_TRIGGER_T5_TRGO;
    #if defined(TIM6)
    } else if (tim->Instance == TIM6) {
        return DAC_TRIGGER_T6_TRGO;
    #endif
    #if defined(TIM7)
    } else if (tim->Instance == TIM7) {
        return DAC_TRIGGER_T7_TRGO;
    #endif
    #if defined(TIM8)
    } else if (tim->Instance == TIM8) {
        return DAC_TRIGGER_T8_TRGO;
    #endif
    } else {
        nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, "Timer does not support DAC triggering"));
    }
}
开发者ID:KnightSch，项目名称:micropython，代码行数:31，代码来源:dac.c

示例14: TIM_Config

/**
  * @brief  TIM configuration
  * @param  None
  * @retval None
  */
static void TIM_Config(void)
{
  TIM_MasterConfigTypeDef master_timer_config;
  RCC_ClkInitTypeDef clk_init_struct = {0};       /* Temporary variable to retrieve RCC clock configuration */
  uint32_t latency;                               /* Temporary variable to retrieve Flash Latency */
  
  uint32_t timer_clock_frequency = 0;             /* Timer clock frequency */
  uint32_t timer_prescaler = 0;                   /* Time base prescaler to have timebase aligned on minimum frequency possible */
  
  /* Configuration of timer as time base:                                     */ 
  /* Caution: Computation of frequency is done for a timer instance on APB1   */
  /*          (clocked by PCLK1)                                              */
  /* Timer period can be adjusted by modifying the following constants:       */
  /* - TIMER_FREQUENCY: timer frequency (unit: Hz).                           */
  /* - TIMER_FREQUENCY_RANGE_MIN: timer minimum frequency (unit: Hz).         */
  
  /* Retrieve timer clock source frequency */
  HAL_RCC_GetClockConfig(&clk_init_struct, &latency);
  /* If APB1 prescaler is different of 1, timers have a factor x2 on their    */
  /* clock source.                                                            */
  if (clk_init_struct.APB1CLKDivider == RCC_HCLK_DIV1)
  {
    timer_clock_frequency = HAL_RCC_GetPCLK1Freq();
  }
  else
  {
    timer_clock_frequency = HAL_RCC_GetPCLK1Freq() *2;
  }
  
  /* Timer prescaler calculation */
  /* (computation for timer 16 bits, additional + 1 to round the prescaler up) */
  timer_prescaler = (timer_clock_frequency / (TIMER_PRESCALER_MAX_VALUE * TIMER_FREQUENCY_RANGE_MIN)) +1;
  
  /* Set timer instance */
  TimHandle.Instance = TIMx;
  
  /* Configure timer parameters */
  TimHandle.Init.Period            = ((timer_clock_frequency / (timer_prescaler * TIMER_FREQUENCY)) - 1);
  TimHandle.Init.Prescaler         = (timer_prescaler - 1);
  TimHandle.Init.ClockDivision     = TIM_CLOCKDIVISION_DIV1;
  TimHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
  TimHandle.Init.RepetitionCounter = 0x0;
  
  if (HAL_TIM_Base_Init(&TimHandle) != HAL_OK)
  {
    /* Timer initialization Error */
    Error_Handler();
  }

  /* Timer TRGO selection */
  master_timer_config.MasterOutputTrigger = TIM_TRGO_UPDATE;
  master_timer_config.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;

  if (HAL_TIMEx_MasterConfigSynchronization(&TimHandle, &master_timer_config) != HAL_OK)
  {
    /* Timer TRGO selection Error */
    Error_Handler();
  }
  
}
开发者ID:NjordCZ，项目名称:STM32Cube_FW_F1，代码行数:65，代码来源:main.c

示例15: MX_TIM3_Init

/* TIM3 init function */
void MX_TIM3_Init(void)
{
  TIM_Encoder_InitTypeDef sConfig;
  TIM_MasterConfigTypeDef sMasterConfig;

  htim3.Instance = TIM3;
  htim3.Init.Prescaler = 0;
  htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim3.Init.Period = 4*ENCODER_GAP-1;
  htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  sConfig.EncoderMode = TIM_ENCODERMODE_TI12;
  sConfig.IC1Polarity = TIM_ICPOLARITY_RISING;
  sConfig.IC1Selection = TIM_ICSELECTION_DIRECTTI;
  sConfig.IC1Prescaler = TIM_ICPSC_DIV1;
  sConfig.IC1Filter = 8;
  sConfig.IC2Polarity = TIM_ICPOLARITY_RISING;
  sConfig.IC2Selection = TIM_ICSELECTION_DIRECTTI;
  sConfig.IC2Prescaler = TIM_ICPSC_DIV1;
  sConfig.IC2Filter = 8;
  if (HAL_TIM_Encoder_Init(&htim3, &sConfig) != HAL_OK)
  {
    Error_Handler();
  }

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
  {
    Error_Handler();
  }

}
开发者ID:navipack，项目名称:navi-panel，代码行数:33，代码来源:tim.c


注：本文中的HAL_TIMEx_MasterConfigSynchronization函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。