本文整理汇总了C++中HAL_PCD_EP_Close函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_PCD_EP_Close函数的具体用法？C++ HAL_PCD_EP_Close怎么用？C++ HAL_PCD_EP_Close使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了HAL_PCD_EP_Close函数的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: USBD_LL_CloseEP
/**
* @brief Closes an endpoint of the Low Level Driver.
* @param pdev: Device handle
* @param ep_addr: Endpoint Number
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
switch (hal_status) {
case HAL_OK :
usb_status = USBD_OK;
break;
case HAL_ERROR :
usb_status = USBD_FAIL;
break;
case HAL_BUSY :
usb_status = USBD_BUSY;
break;
case HAL_TIMEOUT :
usb_status = USBD_FAIL;
break;
default :
usb_status = USBD_FAIL;
break;
}
return usb_status;
}示例2: HAL_PCD_ResetCallback
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
{
USBHAL_Private_t *priv=((USBHAL_Private_t *)(hpcd->pData));
USBHAL *obj= priv->inst;
unsigned int i;
for(i=0;i<hpcd->Init.dev_endpoints;i++) {
priv->epComplete[2*i]=0;
HAL_PCD_EP_Close(hpcd,EP_ADDR(2*i));
HAL_PCD_EP_Flush(hpcd,EP_ADDR(2*i));
priv->epComplete[2*i+1]=0;
HAL_PCD_EP_Close(hpcd,EP_ADDR(2*i+1));
HAL_PCD_EP_Flush(hpcd,EP_ADDR(2*i+1));
}
void (USBHAL::*func)(void)=priv->bus_reset;
bool (USBHAL::*ep_realise)(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) = priv->ep_realise;
(obj->*func)();
(obj->*ep_realise)(EP0IN, MAX_PACKET_SIZE_EP0,0);
(obj->*ep_realise)(EP0OUT, MAX_PACKET_SIZE_EP0,0);
}示例3: usb_dc_ep_disable
int usb_dc_ep_disable(const u8_t ep)
{
struct usb_dc_stm32_ep_state *ep_state = usb_dc_stm32_get_ep_state(ep);
HAL_StatusTypeDef status;
LOG_DBG("ep 0x%02x", ep);
if (!ep_state) {
return -EINVAL;
}
status = HAL_PCD_EP_Close(&usb_dc_stm32_state.pcd, ep);
if (status != HAL_OK) {
LOG_ERR("HAL_PCD_EP_Close failed(0x%02x), %d", ep,
(int)status);
return -EIO;
}
return 0;
}示例4: USBD_LL_CloseEP
/**
* @brief Closes an endpoint of the Low Level Driver.
* @param pdev: Device handle
* @param ep_addr: Endpoint Number
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
{
HAL_PCD_EP_Close(pdev->pData, ep_addr);
return USBD_OK;
}