C++ GetDesignSettings函数代码示例

void FOOTPRINT_EDIT_FRAME::Edit_Edge_Width( EDGE_MODULE* aEdge )
{
    MODULE* module = GetBoard()->m_Modules;

    SaveCopyInUndoList( module, UR_CHANGED );

    if( aEdge == NULL )
    {
        for( BOARD_ITEM *item = module->GraphicalItemsList(); item; item = item->Next() )
        {
            aEdge = dyn_cast<EDGE_MODULE*>( item );

            if( aEdge )
                aEdge->SetWidth( GetDesignSettings().GetLineThickness( aEdge->GetLayer() ) );
        }
    }
    else
    {
        aEdge->SetWidth( GetDesignSettings().GetLineThickness( aEdge->GetLayer() ) );
    }

    OnModify();
    module->CalculateBoundingBox();
    module->SetLastEditTime();
}

MODULE* PCB_BASE_FRAME::Create_1_Module( const wxString& aModuleName )
{
    MODULE*  module;
    wxString moduleName;
    wxPoint  newpos;

    moduleName = aModuleName;

    // Ask for the new module reference
    if( moduleName.IsEmpty() )
    {
        wxTextEntryDialog dlg( this, FMT_MOD_REF, FMT_MOD_CREATE, moduleName );

        if( dlg.ShowModal() != wxID_OK )
            return NULL;    //Aborted by user

        moduleName = dlg.GetValue();
    }

    moduleName.Trim( true );
    moduleName.Trim( false );

    if( moduleName.IsEmpty( ) )
    {
        DisplayInfoMessage( this, FMT_NO_REF_ABORTED );
        return NULL;
    }

    // Creates the new module and add it to the head of the linked list of modules
    module = new MODULE( GetBoard() );

    GetBoard()->Add( module );

    // Update parameters: position, timestamp ...
    newpos = GetScreen()->GetCrossHairPosition();
    module->SetPosition( newpos );
    module->SetLastEditTime();

    // Update its name in lib
    module->m_LibRef = moduleName;

    // Update reference:
    module->m_Reference->m_Text = moduleName;
    module->m_Reference->SetThickness( GetDesignSettings().m_ModuleTextWidth );
    module->m_Reference->SetSize( GetDesignSettings().m_ModuleTextSize );

    // Set the value field to a default value
    module->m_Value->m_Text = wxT( "VAL**" );
    module->m_Value->SetThickness( GetDesignSettings().m_ModuleTextWidth );
    module->m_Value->SetSize( GetDesignSettings().m_ModuleTextSize );
    module->SetPosition( wxPoint( 0, 0 ) );

    SetMsgPanel( module );
    return module;
}

wxSize D_PAD::GetSolderPasteMargin() const
{
    // The pad inherits the margin only to calculate a default shape,
    // therefore only if it is also a copper layer.
    // Pads defined only on mask layers (and perhaps on other tech layers) use the shape
    // defined by the pad settings only
    bool isOnCopperLayer = ( m_layerMask & LSET::AllCuMask() ).any();

    if( !isOnCopperLayer )
        return wxSize( 0, 0 );

    int     margin = m_LocalSolderPasteMargin;
    double  mratio = m_LocalSolderPasteMarginRatio;

    MODULE* module = GetParent();

    if( module )
    {
        if( margin == 0 )
            margin = module->GetLocalSolderPasteMargin();

        auto brd = GetBoard();

        if( margin == 0 && brd )
        {
                margin = brd->GetDesignSettings().m_SolderPasteMargin;
        }

        if( mratio == 0.0 )
            mratio = module->GetLocalSolderPasteMarginRatio();

        if( mratio == 0.0 && brd )
        {
            mratio = brd->GetDesignSettings().m_SolderPasteMarginRatio;
        }
    }

    wxSize pad_margin;
    pad_margin.x = margin + KiROUND( m_Size.x * mratio );
    pad_margin.y = margin + KiROUND( m_Size.y * mratio );

    // ensure mask have a size always >= 0
    if( pad_margin.x < -m_Size.x / 2 )
        pad_margin.x = -m_Size.x / 2;

    if( pad_margin.y < -m_Size.y / 2 )
        pad_margin.y = -m_Size.y / 2;

    return pad_margin;
}

void ZONE_CONTAINER::TransformSolidAreasShapesToPolygonSet(
        SHAPE_POLY_SET& aCornerBuffer, int aError ) const
{
    if( GetFilledPolysList().IsEmpty() )
        return;

    // add filled areas polygons
    aCornerBuffer.Append( m_FilledPolysList );
    auto board = GetBoard();
    int maxError = ARC_HIGH_DEF;

    if( board )
        maxError = board->GetDesignSettings().m_MaxError;

    // add filled areas outlines, which are drawn with thick lines
    for( int i = 0; i < m_FilledPolysList.OutlineCount(); i++ )
    {
        const SHAPE_LINE_CHAIN& path = m_FilledPolysList.COutline( i );

        for( int j = 0; j < path.PointCount(); j++ )
        {
            const VECTOR2I& a = path.CPoint( j );
            const VECTOR2I& b = path.CPoint( j + 1 );

            TransformRoundedEndsSegmentToPolygon( aCornerBuffer, wxPoint( a.x, a.y ),
                    wxPoint( b.x, b.y ), maxError, GetMinThickness() );
        }
    }
}

/* Initialize the drawing of a segment of type other than trace.
 */
DRAWSEGMENT* PCB_EDIT_FRAME::Begin_DrawSegment( DRAWSEGMENT* Segment, STROKE_T shape, wxDC* DC )
{
    int          lineWidth;
    DRAWSEGMENT* DrawItem;

    lineWidth = GetDesignSettings().GetLineThickness( GetActiveLayer() );

    if( Segment == NULL )        // Create new segment.
    {
        SetCurItem( Segment = new DRAWSEGMENT( GetBoard() ) );
        Segment->SetFlags( IS_NEW );
        Segment->SetLayer( GetActiveLayer() );
        Segment->SetWidth( lineWidth );
        Segment->SetShape( shape );
        Segment->SetAngle( 900 );
        Segment->SetStart( GetCrossHairPosition() );
        Segment->SetEnd( GetCrossHairPosition() );
        m_canvas->SetMouseCapture( DrawSegment, Abort_EditEdge );
    }
    else
    {
        // The ending point coordinate Segment->m_End was updated by the function
        // DrawSegment() called on a move mouse event during the segment creation
        if( Segment->GetStart() != Segment->GetEnd() )
        {
            if( Segment->GetShape() == S_SEGMENT )
            {
                SaveCopyInUndoList( Segment, UR_NEW );
                GetBoard()->Add( Segment );

                OnModify();
                Segment->ClearFlags();

                Segment->Draw( m_canvas, DC, GR_OR );

                DrawItem = Segment;

                SetCurItem( Segment = new DRAWSEGMENT( GetBoard() ) );

                Segment->SetFlags( IS_NEW );
                Segment->SetLayer( DrawItem->GetLayer() );
                Segment->SetWidth( lineWidth );
                Segment->SetShape( DrawItem->GetShape() );
                Segment->SetType( DrawItem->GetType() );
                Segment->SetAngle( DrawItem->GetAngle() );
                Segment->SetStart( DrawItem->GetEnd() );
                Segment->SetEnd( DrawItem->GetEnd() );
                DrawSegment( m_canvas, DC, wxDefaultPosition, false );
            }
            else
            {
                End_Edge( Segment, DC );
                Segment = NULL;
            }
        }
    }

    return Segment;
}

void PCB_EDIT_FRAME::OnUpdateSelectTrackWidth( wxUpdateUIEvent& aEvent )
{
    if( aEvent.GetId() == ID_AUX_TOOLBAR_PCB_TRACK_WIDTH )
    {
        if( m_SelTrackWidthBox->GetSelection() != (int) GetDesignSettings().GetTrackWidthIndex() )
            m_SelTrackWidthBox->SetSelection( GetDesignSettings().GetTrackWidthIndex() );
    }
    else
    {
        bool check = ( ( ( ID_POPUP_PCB_SELECT_WIDTH1 +
                           (int) GetDesignSettings().GetTrackWidthIndex() ) == aEvent.GetId() ) &&
                               !GetDesignSettings().m_UseConnectedTrackWidth &&
                               !GetDesignSettings().UseCustomTrackViaSize() );

        aEvent.Check( check );
    }
}

/* Add a new pad to aModule.
 */
void PCB_BASE_FRAME::AddPad( MODULE* aModule, bool draw )
{
    m_Pcb->m_Status_Pcb     = 0;
    aModule->SetLastEditTime();

    D_PAD* pad = new D_PAD( aModule );

    // Add the new pad to end of the module pad list.
    aModule->Pads().PushBack( pad );

    // Update the pad properties,
    // and keep NETINFO_LIST::ORPHANED as net info
    // which is the default when nets cannot be handled.
    Import_Pad_Settings( pad, false );

    pad->SetPosition( GetCrossHairPosition() );

    // Set the relative pad position
    // ( pad position for module orient, 0, and relative to the module position)

    wxPoint pos0 = pad->GetPosition() - aModule->GetPosition();
    RotatePoint( &pos0, -aModule->GetOrientation() );
    pad->SetPos0( pos0 );

    /* NPTH pads take empty pad number (since they can't be connected),
     * other pads get incremented from the last one edited */
    wxString padName;

    if( pad->GetAttribute() != PAD_ATTRIB_HOLE_NOT_PLATED )
    {
        padName = GetNextPadName( GetDesignSettings()
                .m_Pad_Master.GetPadName() );
    }

    pad->SetPadName( padName );
    GetDesignSettings().m_Pad_Master.SetPadName( padName );

    aModule->CalculateBoundingBox();
    SetMsgPanel( pad );

    if( draw )
        m_canvas->RefreshDrawingRect( aModule->GetBoundingBox() );
}

void PCB_BASE_FRAME::ResetTextSize( BOARD_ITEM* aItem, wxDC* aDC )
{
    wxSize newSize;
    int newThickness;

    if( aItem->Type() == PCB_TEXT_T )
    {
        newSize = GetDesignSettings().m_PcbTextSize;
        newThickness = GetDesignSettings().m_PcbTextWidth;
        TEXTE_PCB* text = static_cast<TEXTE_PCB*>( aItem );

        // Exit if there's nothing to do
        if( text->GetTextSize() == newSize && text->GetThickness() == newThickness )
            return;

        SaveCopyInUndoList( text, UR_CHANGED );
        text->SetTextSize( newSize );
        text->SetThickness( newThickness );
    }

    else if( aItem->Type() ==  PCB_MODULE_TEXT_T )
    {
        newSize = GetDesignSettings().m_ModuleTextSize;
        newThickness = GetDesignSettings().m_ModuleTextWidth;
        TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( aItem );

        // Exit if there's nothing to do
        if( text->GetTextSize() == newSize && text->GetThickness() == newThickness )
            return;

        SaveCopyInUndoList( text->GetParent(), UR_CHANGED );
        text->SetTextSize( newSize );
        text->SetThickness( newThickness );
    }
    else
        return;

    if( aDC )
        m_canvas->Refresh();

    OnModify();
}

bool PCB_EDIT_FRAME::SetCurrentNetClass( const wxString& aNetClassName )
{
    bool change = GetDesignSettings().SetCurrentNetClass( aNetClassName );

    if( change )
    {
        ReCreateAuxiliaryToolbar();
    }

    return change;
}

/*
 * Exports the current pad settings to board design settings.
 */
void PCB_BASE_FRAME::Export_Pad_Settings( D_PAD* aPad )
{
    if( aPad == NULL )
        return;

    SetMsgPanel( aPad );

    D_PAD& masterPad = GetDesignSettings().m_Pad_Master;

    masterPad.ImportSettingsFromMaster( *aPad );
}

/* Imports the board design settings to aPad
 * - The position, names, and keys are not modifed.
 */
void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
{
    if( aDraw )
    {
        aPad->SetFlags( DO_NOT_DRAW );
        m_canvas->RefreshDrawingRect( aPad->GetBoundingBox() );
        aPad->ClearFlags( DO_NOT_DRAW );
    }

    D_PAD& mp = GetDesignSettings().m_Pad_Master;

    aPad->SetShape( mp.GetShape() );
    aPad->SetLayerSet( mp.GetLayerSet() );
    aPad->SetAttribute( mp.GetAttribute() );
    aPad->SetOrientation( mp.GetOrientation() + aPad->GetParent()->GetOrientation() );
    aPad->SetSize( mp.GetSize() );
    aPad->SetDelta( wxSize( 0, 0 ) );
    aPad->SetOffset( mp.GetOffset() );
    aPad->SetDrillSize( mp.GetDrillSize() );
    aPad->SetDrillShape( mp.GetDrillShape() );

    switch( mp.GetShape() )
    {
    case PAD_TRAPEZOID:
        aPad->SetDelta( mp.GetDelta() );
        break;

    case PAD_CIRCLE:
        // ensure size.y == size.x
        aPad->SetSize( wxSize( aPad->GetSize().x, aPad->GetSize().x ) );
        break;

    default:
        ;
    }

    switch( mp.GetAttribute() )
    {
    case PAD_SMD:
    case PAD_CONN:
        aPad->SetDrillSize( wxSize( 0, 0 ) );
        aPad->SetOffset( wxPoint( 0, 0 ) );
        break;
    default:
        ;
    }

    if( aDraw )
        m_canvas->RefreshDrawingRect( aPad->GetBoundingBox() );

    aPad->GetParent()->SetLastEditTime();

    OnModify();
}

void FOOTPRINT_EDIT_FRAME::Enter_Edge_Width( EDGE_MODULE* aEdge )
{
    wxString buffer;

    buffer = StringFromValue( g_UserUnit, GetDesignSettings().m_ModuleSegmentWidth );
    wxTextEntryDialog dlg( this, _( "New Width:" ), _( "Edge Width" ), buffer );

    if( dlg.ShowModal() != wxID_OK )
        return; // canceled by user

    buffer = dlg.GetValue( );
    GetDesignSettings().m_ModuleSegmentWidth = ValueFromString( g_UserUnit, buffer );

    if( aEdge )
    {
        MODULE* module = GetBoard()->m_Modules;
        aEdge->SetWidth( GetDesignSettings().m_ModuleSegmentWidth );
        module->CalculateBoundingBox();
        OnModify();
    }
}

void PCB_EDIT_FRAME::updateViaSizeSelectBox()
{
    if( m_SelViaSizeBox == NULL )
        return;

    wxString msg;

    m_SelViaSizeBox->Clear();
    bool mmFirst = g_UserUnit != INCHES;

    for( unsigned ii = 0; ii < GetDesignSettings().m_ViasDimensionsList.size(); ii++ )
    {
        int diam = GetDesignSettings().m_ViasDimensionsList[ii].m_Diameter;

        double valueMils = To_User_Unit( INCHES, diam ) * 1000;
        double value_mm = To_User_Unit( MILLIMETRES, diam );

        if( mmFirst )
            msg.Printf( _( "Via: %.2f mm (%.1f mils)" ),
                        value_mm, valueMils );
        else
            msg.Printf( _( "Via: %.1f mils (%.2f mm)" ),
                        valueMils, value_mm );

        int hole = GetDesignSettings().m_ViasDimensionsList[ii].m_Drill;

        if( hole )
        {
            msg  << wxT("/ ");
            wxString hole_str;
            valueMils = To_User_Unit( INCHES, hole ) * 1000;
            value_mm = To_User_Unit( MILLIMETRES, hole );

            if( mmFirst )
                hole_str.Printf( _( "%.2f mm (%.1f mils)" ),
                                 value_mm, valueMils );
            else
                hole_str.Printf( _( "%.1f mils (%.2f mm)" ),
                                 valueMils, value_mm );

            msg += hole_str;
        }

        // Mark the netclass via size value (the first in list)
        if( ii == 0 )
            msg << wxT( " *" );

        m_SelViaSizeBox->Append( msg );
    }

    if( GetDesignSettings().GetViaSizeIndex() >= GetDesignSettings().m_ViasDimensionsList.size() )
        GetDesignSettings().SetViaSizeIndex( 0 );

    m_SelViaSizeBox->SetSelection( GetDesignSettings().GetViaSizeIndex() );
}

void FOOTPRINT_EDIT_FRAME::LoadSettings( wxConfigBase* aCfg )
{
    PCB_BASE_FRAME::LoadSettings( aCfg );
    wxConfigLoadSetups( aCfg, GetConfigurationSettings() );

    // Ensure some params are valid
    BOARD_DESIGN_SETTINGS& settings = GetDesignSettings();

    // Usually, graphic items are drawn on F_SilkS or F_Fab layer
    // Force these layers if not default
    if( ( settings.m_RefDefaultlayer != F_SilkS ) && ( settings.m_RefDefaultlayer != F_Fab ) )
        settings.m_RefDefaultlayer = F_SilkS;

    if( ( settings.m_ValueDefaultlayer != F_SilkS ) && ( settings.m_ValueDefaultlayer != F_Fab ) )
        settings.m_ValueDefaultlayer = F_Fab;
}

PCB_TARGET* PCB_EDIT_FRAME::CreateTarget( wxDC* DC )
{
    PCB_TARGET* target = new PCB_TARGET( GetBoard() );

    target->SetFlags( IS_NEW );

    GetBoard()->Add( target );

    target->SetLayer( Edge_Cuts );
    target->SetWidth( GetDesignSettings().m_EdgeSegmentWidth );
    target->SetSize( MireDefaultSize );
    target->SetPosition( GetCrossHairPosition() );

    PlaceTarget( target, DC );

    return target;
}