当前位置: 首页>>代码示例>>C++>>正文

C++ GPIO_VREG函数代码示例

本文整理汇总了C++中GPIO_VREG函数的典型用法代码示例。如果您正苦于以下问题：C++ GPIO_VREG函数的具体用法？C++ GPIO_VREG怎么用？C++ GPIO_VREG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了GPIO_VREG函数的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: ARRAY_SIZE

				.always_on	= _always_on, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data msm_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_L2, "ext_l2", "ext_l2_en", 91, NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		PM8921_GPIO_PM_TO_SYS(17), NULL),
	GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en",
		PM8921_GPIO_PM_TO_SYS(42), "8921_usb_otg"),
};

/* SAW regulator constraints */
struct regulator_init_data msm_saw_regulator_pdata_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm_saw_regulator_pdata_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

/* PM8921 regulator constraints */
开发者ID:DrewC4，项目名称:Optimus-F7-fx1s，代码行数:31，代码来源:board-vu2-regulator.c

示例2: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		  APQ8064_EXT_3P3V_REG_EN_GPIO, NULL),
	GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
		  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
};

struct gpio_regulator_platform_data
mpq8064_gpio_regulator_pdata[] __devinitdata = {
	GPIO_VREG(AVC_1P2V, "avc_1p2v", "avc_1p2v_en", SX150X_GPIO(4, 2), NULL),
	GPIO_VREG(AVC_1P8V, "avc_1p8v", "avc_1p8v_en", SX150X_GPIO(4, 4), NULL),
	GPIO_VREG(AVC_2P2V, "avc_2p2v", "avc_2p2v_en",
						 SX150X_GPIO(4, 14), NULL),
	GPIO_VREG(AVC_5V, "avc_5v", "avc_5v_en", SX150X_GPIO(4, 3), NULL),
开发者ID:18712886438，项目名称:NewWorld-F160-JB-Kernel，代码行数:31，代码来源:board-8064-regulator.c

示例3: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
impression_j_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	//GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
	//	  impression_j_EXT_3P3V_REG_EN_GPIO, NULL),
	//GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
	//	  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
};

/* SAW regulator constraints */
struct regulator_init_data impression_j_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data impression_j_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);
开发者ID:BackupWildfireDEV，项目名称:ElementalX-Sense-5.0.2，代码行数:30，代码来源:board-impression_j-regulator.c

示例4: ARRAY_SIZE

				.valid_ops_mask	= REGULATOR_CHANGE_STATUS, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id), \
			.consumer_supplies	= vreg_consumers_##_id, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.regulator_name = _reg_name, \
		.gpio_label	= _gpio_label, \
		.gpio		= _gpio, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data msm7x27a_evb_gpio_regulator_pdata[] = {
	/*        ID			vreg_name		gpio_label		gpio	supply */
	GPIO_VREG(EXT_2V8,		"ext_2v8",		"ext_2v8_en",	35,		NULL),
	GPIO_VREG(EXT_1V8,		"ext_1v8",		"ext_1v8_en",	40,		NULL),
};

struct gpio_regulator_platform_data msm7x27a_sku3_gpio_regulator_pdata[] = {
	/*        ID			vreg_name		gpio_label		gpio	supply */
	GPIO_VREG(EXT_2V8,		"ext_2v8",		"ext_2v8_en",	35,		NULL),
	GPIO_VREG(EXT_1V8,		"ext_1v8",		"ext_1v8_en",	34,		NULL),
};

struct gpio_regulator_platform_data msm7x27a_sku7_gpio_regulator_pdata[] = {
	/*        ID			vreg_name		gpio_label		gpio	supply */
	GPIO_VREG(EXT_2V8,		"ext_2v8",		"ext_2v8_en",	35,		NULL),
	GPIO_VREG(EXT_1V8,		"ext_1v8",		"ext_1v8_en",	58,		NULL),
};
开发者ID:deafnote，项目名称:kernel_cross_a28，代码行数:30，代码来源:board-msm7x27a-regulator.c

示例5: GPIO_VREG

	//ASUS_BSP+++ BennyCheng "remove unused mpp/gpio pins"
	/*
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		  APQ8064_EXT_3P3V_REG_EN_GPIO, NULL),
	GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
		  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
	*/
	//ASUS_BSP--- BennyCheng "remove unused mpp/gpio pins"
};

struct gpio_regulator_platform_data
mpq8064_gpio_regulator_pdata[] __devinitdata = {
	GPIO_VREG(AVC_1P2V, "avc_1p2v", "avc_1p2v_en", SX150X_GPIO(4, 2), NULL),
	GPIO_VREG(AVC_1P8V, "avc_1p8v", "avc_1p8v_en", SX150X_GPIO(4, 4), NULL),
	GPIO_VREG(AVC_2P2V, "avc_2p2v", "avc_2p2v_en",
						 SX150X_GPIO(4, 14), NULL),
	GPIO_VREG(AVC_5V, "avc_5v", "avc_5v_en", SX150X_GPIO(4, 3), NULL),
	GPIO_VREG(AVC_3P3V, "avc_3p3v", "avc_3p3v_en",
					SX150X_GPIO(4, 15), "avc_5v"),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);
开发者ID:gcloudspider，项目名称:android_kernel_asus_A68，代码行数:30，代码来源:board-8064-regulator.c

示例6: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		  APQ8064_EXT_3P3V_REG_EN_GPIO, NULL),
	GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
		  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
	GPIO_VREG(BT_WIFI, "bt_wifi_en", "gpio_8_vreg", ATH_CHIP_PWD_L,
			NULL),
};

struct gpio_regulator_platform_data
mpq8064_gpio_regulator_pdata[] __devinitdata = {
	GPIO_VREG(AVC_1P2V, "avc_1p2v", "avc_1p2v_en", SX150X_GPIO(4, 2), NULL),
	GPIO_VREG(AVC_1P8V, "avc_1p8v", "avc_1p8v_en", SX150X_GPIO(4, 4), NULL),
	GPIO_VREG(AVC_2P2V, "avc_2p2v", "avc_2p2v_en",
开发者ID:androidrbox，项目名称:android_kernel_amazon_bueller，代码行数:31，代码来源:board-8064-regulator.c

示例7: ARRAY_SIZE

	{ \
		.constraints = { \
			.name		= _name, \
			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE, \
			.min_uV		= _min_uV, \
			.max_uV		= _max_uV, \
		}, \
		.num_consumer_supplies	= ARRAY_SIZE(vreg_consumers_##_id), \
		.consumer_supplies	= vreg_consumers_##_id, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
msm8930_gpio_regulator_pdata[] __devinitdata = {
	/*        ID          vreg_name     gpio_label     gpio  supply */
	GPIO_VREG(EXT_5V,     "ext_5v",     "ext_5v_en",     63, NULL),
	GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en", 97, "ext_5v"),
};

/* SAW regulator constraints */
struct regulator_init_data msm8930_saw_regulator_core0_pdata =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8038_s5",	       400000, 1400000);
struct regulator_init_data msm8930_saw_regulator_core1_pdata =
	SAW_VREG_INIT(S6, "8038_s6",	       400000, 1400000);

/* PM8038 regulator constraints */
struct pm8xxx_regulator_platform_data
msm8930_pm8038_regulator_pdata[] __devinitdata = {
	/*
	 *	    ID  name always_on pd min_uV   max_uV   en_t supply
开发者ID:JmzTaylor，项目名称:android_kernel_htc_totemc2，代码行数:31，代码来源:board-tc2-regulator.c

示例8: GPIO_VREG

			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
/*	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		  APQ8064_EXT_3P3V_REG_EN_GPIO, NULL),
	GPIO_VREG(EXT_TS_SW, "ext_ts_sw", "ext_ts_sw_en",
		  PM8921_GPIO_PM_TO_SYS(23), "ext_3p3v"),*/
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
};

struct gpio_regulator_platform_data
mpq8064_gpio_regulator_pdata[] __devinitdata = {
	GPIO_VREG(AVC_1P2V, "avc_1p2v", "avc_1p2v_en", SX150X_GPIO(4, 2), NULL),
	GPIO_VREG(AVC_1P8V, "avc_1p8v", "avc_1p8v_en", SX150X_GPIO(4, 4), NULL),
	GPIO_VREG(AVC_2P2V, "avc_2p2v", "avc_2p2v_en",
						 SX150X_GPIO(4, 14), NULL),
	GPIO_VREG(AVC_5V, "avc_5v", "avc_5v_en", SX150X_GPIO(4, 3), NULL),
	GPIO_VREG(AVC_3P3V, "avc_3p3v", "avc_3p3v_en",
					SX150X_GPIO(4, 15), "avc_5v"),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
开发者ID:LeetCodes，项目名称:flo-ElementalX，代码行数:32，代码来源:board-flo-regulator.c

示例9: ARRAY_SIZE

			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*	ID	vreg_name gpio_label	gpio		supply */
	GPIO_VREG(EXT_DSV_LOAD, "ext_dsv_load", "ext_dsv_load_en", APQ8064_EXT_DSV_LOAD_EN_GPIO, NULL),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       600000, 1450000);
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       600000, 1450000);

struct regulator_init_data msm8064_saw_regulator_pdata_8821_s0 =
	/*	      ID       vreg_name	min_uV  max_uV */
	SAW_VREG_INIT(8821_S0, "8821_s0",       600000, 1450000);
struct regulator_init_data msm8064_saw_regulator_pdata_8821_s1 =
	SAW_VREG_INIT(8821_S1, "8821_s1",       600000, 1450000);
开发者ID:Loller79，项目名称:Solid_Kernel-GEEHRC-Bricked，代码行数:30，代码来源:board-mako-regulator.c

示例10: GPIO_VREG

			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints.
 * Must be in sync with corresponding platform_device structures in
 * board_sony_fusion3.c
 */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio  supply active_low*/
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7),
		NULL, 0),
	GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en",
		PM8921_GPIO_PM_TO_SYS(42), NULL, 1),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

struct regulator_init_data msm8064_saw_regulator_pdata_8821_s0 =
	/*	      ID       vreg_name	min_uV  max_uV */
	SAW_VREG_INIT(8821_S0, "8821_s0",       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8821_s1 =
开发者ID:AOKP，项目名称:kernel_sony_apq8064，代码行数:32，代码来源:board-sony_dogo-regulator.c

示例11: ARRAY_SIZE

				.always_on	= _always_on, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data msm_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
};

/* SAW regulator constraints */
struct regulator_init_data msm_saw_regulator_pdata_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm_saw_regulator_pdata_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

/* PM8921 regulator constraints */
struct pm8xxx_regulator_platform_data
msm_pm8921_regulator_pdata[] __devinitdata = {
	/*
	 *		ID   name always_on pd min_uV   max_uV   en_t supply
	 *	system_uA reg_ID
开发者ID:NoelMacwan，项目名称:SXDHuashan，代码行数:31，代码来源:board-viskan_huashan-regulator.c

示例12: GPIO_VREG

			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints.
 * Must be in sync with corresponding platform_device structures in
 * board_sony_fusion3.c
 */
struct gpio_regulator_platform_data
apq8064_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio  supply active_low*/
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7),
		NULL, 0),
	GPIO_VREG(EXT_SD_PWR, "ext_sd_pwr", "ext_sd_pwr_en",
		PM8921_MPP_PM_TO_SYS(4), "8921_l6", 0),
	GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en",
		PM8921_GPIO_PM_TO_SYS(42), NULL, 1),
};

/* SAW regulator constraints */
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data msm8064_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

struct regulator_init_data msm8064_saw_regulator_pdata_8821_s0 =
	/*	      ID       vreg_name	min_uV  max_uV */
开发者ID:EnJens，项目名称:android_kernel_sony_pollux_windy_stock，代码行数:32，代码来源:board-sony_odin-regulator.c

示例13: ARRAY_SIZE

				.always_on	= _always_on, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

struct gpio_regulator_platform_data
monarudo_gpio_regulator_pdata[] __devinitdata = {
	
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en",
			PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
			monarudo_EXT_3P3V_REG_EN_GPIO, NULL),
	
	
	GPIO_VREG(EXT_MPP8, "ext_mpp8", "ext_mpp8_en",
			PM8921_MPP_PM_TO_SYS(8), NULL),
};

struct regulator_init_data monarudo_saw_regulator_pdata_8921_s5 =
	
	SAW_VREG_INIT(S5, "8921_s5",	       850000, 1300000);
struct regulator_init_data monarudo_saw_regulator_pdata_8921_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       850000, 1300000);

struct regulator_init_data monarudo_saw_regulator_pdata_8821_s0 =
开发者ID:Red680812，项目名称:DNA_kitkat，代码行数:32，代码来源:board-monarudo-regulator.c

示例14: ARRAY_SIZE

				.always_on	= _always_on, \
			}, \
			.num_consumer_supplies	= \
					ARRAY_SIZE(vreg_consumers_##_id##_PC), \
			.consumer_supplies	= vreg_consumers_##_id##_PC, \
			.supply_regulator	= _supply_regulator, \
		}, \
		.id	  = RPM_VREG_ID_PM8921_##_id##_PC, \
		.pin_fn	  = RPM_VREG_PIN_FN_8960_##_pin_fn, \
		.pin_ctrl = _pin_ctrl, \
	}

/* GPIO regulator constraints */
struct gpio_regulator_platform_data msm_gpio_regulator_pdata[] __devinitdata = {
	/*        ID      vreg_name gpio_label   gpio                  supply */
	GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", PM8921_MPP_PM_TO_SYS(7), NULL),
	GPIO_VREG(EXT_L2, "ext_l2", "ext_l2_en", 91, NULL),
	GPIO_VREG(EXT_3P3V, "ext_3p3v", "ext_3p3v_en",
		PM8921_GPIO_PM_TO_SYS(17), NULL),
};

/* SAW regulator constraints */
struct regulator_init_data msm_saw_regulator_pdata_s5 =
	/*	      ID  vreg_name	       min_uV   max_uV */
	SAW_VREG_INIT(S5, "8921_s5",	       700000, 1300000);
struct regulator_init_data msm_saw_regulator_pdata_s6 =
	SAW_VREG_INIT(S6, "8921_s6",	       700000, 1300000);

/* PM8921 regulator constraints */
struct pm8xxx_regulator_platform_data
msm_pm8921_regulator_pdata[] __devinitdata = {
开发者ID:Shr3ps，项目名称:kernel_s500_cm10，代码行数:31，代码来源:board-acer-8960-regulator.c


注：本文中的GPIO_VREG函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。