C++ GL_State函数代码示例

static inline void RB_BlurGlowTexture()
{
	qglDisable (GL_CLIP_PLANE0);
	GL_Cull( CT_TWO_SIDED );

	// Go into orthographic 2d mode.
	qglMatrixMode(GL_PROJECTION);
	qglPushMatrix();
	qglLoadIdentity();
	qglOrtho(0, backEnd.viewParms.viewportWidth, backEnd.viewParms.viewportHeight, 0, -1, 1);
	qglMatrixMode(GL_MODELVIEW);
	qglPushMatrix();
	qglLoadIdentity();

	GL_State(GLS_DEPTHTEST_DISABLE);

	/////////////////////////////////////////////////////////
	// Setup vertex and pixel programs.
	/////////////////////////////////////////////////////////

	// NOTE: The 0.25 is because we're blending 4 textures (so = 1.0) and we want a relatively normalized pixel
	// intensity distribution, but this won't happen anyways if intensity is higher than 1.0.
	float fBlurDistribution = r_DynamicGlowIntensity->value * 0.25f;
	float fBlurWeight[4] = { fBlurDistribution, fBlurDistribution, fBlurDistribution, 1.0f };

	// Enable and set the Vertex Program.
	qglEnable( GL_VERTEX_PROGRAM_ARB );
	qglBindProgramARB( GL_VERTEX_PROGRAM_ARB, tr.glowVShader );

	// Apply Pixel Shaders.
	if ( qglCombinerParameterfvNV )
	{
		BeginPixelShader( GL_REGISTER_COMBINERS_NV, tr.glowPShader );

		// Pass the blur weight to the regcom.
		qglCombinerParameterfvNV( GL_CONSTANT_COLOR0_NV, (float*)&fBlurWeight );
	}
	else if ( qglProgramEnvParameter4fARB )
	{
		BeginPixelShader( GL_FRAGMENT_PROGRAM_ARB, tr.glowPShader );

		// Pass the blur weight to the Fragment Program.
		qglProgramEnvParameter4fARB( GL_FRAGMENT_PROGRAM_ARB, 0, fBlurWeight[0], fBlurWeight[1], fBlurWeight[2], fBlurWeight[3] );
	}

	/////////////////////////////////////////////////////////
	// Set the blur texture to the 4 texture stages.
	/////////////////////////////////////////////////////////

	// How much to offset each texel by.
	float fTexelWidthOffset = 0.1f, fTexelHeightOffset = 0.1f;

	GLuint uiTex = tr.screenGlow;  

	qglActiveTextureARB( GL_TEXTURE3_ARB );  
	qglEnable( GL_TEXTURE_RECTANGLE_EXT ); 
	qglBindTexture( GL_TEXTURE_RECTANGLE_EXT, uiTex );
	
	qglActiveTextureARB( GL_TEXTURE2_ARB ); 
	qglEnable( GL_TEXTURE_RECTANGLE_EXT );
	qglBindTexture( GL_TEXTURE_RECTANGLE_EXT, uiTex );

	qglActiveTextureARB( GL_TEXTURE1_ARB );
	qglEnable( GL_TEXTURE_RECTANGLE_EXT );
	qglBindTexture( GL_TEXTURE_RECTANGLE_EXT, uiTex );

	qglActiveTextureARB(GL_TEXTURE0_ARB );
	qglDisable( GL_TEXTURE_2D );  
	qglEnable( GL_TEXTURE_RECTANGLE_EXT );
	qglBindTexture( GL_TEXTURE_RECTANGLE_EXT, uiTex ); 
	
	/////////////////////////////////////////////////////////
	// Draw the blur passes (each pass blurs it more, increasing the blur radius ).
	/////////////////////////////////////////////////////////
	
	//int iTexWidth = backEnd.viewParms.viewportWidth, iTexHeight = backEnd.viewParms.viewportHeight;
	int iTexWidth = glConfig.vidWidth, iTexHeight = glConfig.vidHeight; 
	
	for ( int iNumBlurPasses = 0; iNumBlurPasses < r_DynamicGlowPasses->integer; iNumBlurPasses++ )       
	{
		// Load the Texel Offsets into the Vertex Program.
		qglProgramEnvParameter4fARB( GL_VERTEX_PROGRAM_ARB, 0, -fTexelWidthOffset, -fTexelWidthOffset, 0.0f, 0.0f );
		qglProgramEnvParameter4fARB( GL_VERTEX_PROGRAM_ARB, 1, -fTexelWidthOffset, fTexelWidthOffset, 0.0f, 0.0f );
		qglProgramEnvParameter4fARB( GL_VERTEX_PROGRAM_ARB, 2, fTexelWidthOffset, -fTexelWidthOffset, 0.0f, 0.0f );
		qglProgramEnvParameter4fARB( GL_VERTEX_PROGRAM_ARB, 3, fTexelWidthOffset, fTexelWidthOffset, 0.0f, 0.0f );

		// After first pass put the tex coords to the viewport size.
		if ( iNumBlurPasses == 1 )
		{
			if ( !g_bTextureRectangleHack ) 
			{
				iTexWidth = backEnd.viewParms.viewportWidth;
				iTexHeight = backEnd.viewParms.viewportHeight;
			}

			uiTex = tr.blurImage;
			qglActiveTextureARB( GL_TEXTURE3_ARB );  
			qglDisable( GL_TEXTURE_2D );
			qglEnable( GL_TEXTURE_RECTANGLE_EXT ); 
			qglBindTexture( GL_TEXTURE_RECTANGLE_EXT, uiTex );
//.........这里部分代码省略.........

void RB_StageIteratorLightmappedMultitexture( void ) {
    shaderCommands_t *input;

    input = &tess;

    //
    // log this call
    //
    if ( r_logFile->integer ) {
        // don't just call LogComment, or we will get
        // a call to va() every frame!
        GLimp_LogComment( va("--- RB_StageIteratorLightmappedMultitexture( %s ) ---\n", tess.shader->name) );
    }

    //
    // set face culling appropriately
    //
    GL_Cull( input->shader->cullType );

    //
    // set color, pointers, and lock
    //
    GL_State( GLS_DEFAULT );
    qglVertexPointer( 3, GL_FLOAT, 16, input->xyz );
    qglNormalPointer (GL_FLOAT, 16, input->normal);

#ifdef REPLACE_MODE
    qglDisableClientState( GL_COLOR_ARRAY );
    qglColor3f( 1, 1, 1 );
    qglShadeModel( GL_FLAT );
#else
    qglEnableClientState( GL_COLOR_ARRAY );
    qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, tess.constantColor255 );
#endif

    //
    // select base stage
    //
    GL_SelectTexture( 0 );

    qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
    R_BindAnimatedImage( &tess.xstages[0]->bundle[0] );
    qglTexCoordPointer( 2, GL_FLOAT, 16, tess.texCoords[0][0] );

    //
    // configure second stage
    //
    GL_SelectTexture( 1 );
    qglEnable( GL_TEXTURE_2D );
    if ( r_lightmap->integer ) {
        GL_TexEnv( GL_REPLACE );
    } else {
        GL_TexEnv( GL_MODULATE );
    }
    R_BindAnimatedImage( &tess.xstages[0]->bundle[1] );
    qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
    qglTexCoordPointer( 2, GL_FLOAT, 16, tess.texCoords[0][1] );

    //
    // lock arrays
    //
    if ( qglLockArraysEXT ) {
        qglLockArraysEXT(0, input->numVertexes);
        GLimp_LogComment( "glLockArraysEXT\n" );
    }

    R_DrawElements( input->numIndexes, input->indexes );

    //
    // disable texturing on TEXTURE1, then select TEXTURE0
    //
    qglDisable( GL_TEXTURE_2D );
    qglDisableClientState( GL_TEXTURE_COORD_ARRAY );

    GL_SelectTexture( 0 );
#ifdef REPLACE_MODE
    GL_TexEnv( GL_MODULATE );
    qglShadeModel( GL_SMOOTH );
#endif

    //
    // now do any dynamic lighting needed
    //
    if ( tess.dlightBits && tess.shader->sort <= SS_OPAQUE ) {
        ProjectDlightTexture();
    }

    //
    // now do fog
    //
    if ( tess.fogNum && tess.shader->fogPass ) {
        RB_FogPass();
    }

    //
    // unlock arrays
    //
    if ( qglUnlockArraysEXT ) {
        qglUnlockArraysEXT();
        GLimp_LogComment( "glUnlockArraysEXT\n" );
//.........这里部分代码省略.........

/*
** RB_IterateStagesGeneric
*/
static void RB_IterateStagesGeneric( shaderCommands_t *input )
{
    int stage;
    int loc;
    GLenum prog;
    char texname[MAX_QPATH];
    shaderStage_t *pStage;

    /*if ( input->shader->GLSL ) {
    	prog = getShaderProgram(input->shader->GLSLName);
    	if(prog == -1) return;

    	for ( stage = 0; stage < MAX_SHADER_STAGES; stage++ )
    	{
    		pStage = tess.xstages[stage];
    		if(pStage) {

    			ComputeColors( pStage );
    			ComputeTexCoords( pStage );

    			if ( !setArraysOnce )
    			{
    				qglTexCoordPointer( 2, GL_FLOAT, 0, input->svars.texcoords[0] );
    				qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, input->svars.colors );
    			}

    			if(pStage->bundle[0].image) {
    				qglActiveTextureARB(GL_TEXTURE0_ARB + stage);
    				qglBindTexture (GL_TEXTURE_2D, pStage->bundle[0].image[0]->texnum);

    				Com_sprintf(texname,sizeof(texname),"texture_%i\n", stage);

    				loc = qglGetUniformLocationARB(prog, texname);
    				qglUniform1iARB(loc, stage);
    			}
    		}
    	}

    	pStage = tess.xstages[0];
    	GL_State( pStage->stateBits );

    	R_DrawElements( input->numIndexes, input->indexes );
    	return;
    }*/

    for ( stage = 0; stage < MAX_SHADER_STAGES; stage++ )
    {
        shaderStage_t *pStage = tess.xstages[stage];

        if ( !pStage )
        {
            break;
        }

        ComputeColors( pStage );
        ComputeTexCoords( pStage );

        if ( !setArraysOnce )
        {
            qglEnableClientState( GL_COLOR_ARRAY );
            qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, input->svars.colors );
        }

        //
        // do multitexture
        //
        if ( pStage->bundle[1].image[0] != 0 )
        {
            //Lightmaps and such
            DrawMultitextured( input, stage );
        }
        else
        {
            if ( !setArraysOnce )
            {
                qglTexCoordPointer( 2, GL_FLOAT, 0, input->svars.texcoords[0] );
            }

            //LOL WTF, I don't need to do this!
            /*if(pStage->clamp) {
            	qglTexParameterf( GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP );
            	qglTexParameterf( GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP );
            }*/

            //
            // set state
            //
            if ( pStage->bundle[0].vertexLightmap && ( (r_vertexLight->integer && !r_uiFullScreen->integer) || glConfig.hardwareType == GLHW_PERMEDIA2 ) && r_lightmap->integer )
            {
                GL_Bind( tr.whiteImage );
            }
            else
                R_BindAnimatedImage( &pStage->bundle[0] );

            GL_State( pStage->stateBits );

            //
//.........这里部分代码省略.........

//.........这里部分代码省略.........

		{
			vec4_t baseColor;
			vec4_t vertColor;

			ComputeShaderColors(pStage, baseColor, vertColor, GLS_SRCBLEND_ONE | GLS_DSTBLEND_ONE);

			GLSL_SetUniformVec4(sp, UNIFORM_BASECOLOR, baseColor);
			GLSL_SetUniformVec4(sp, UNIFORM_VERTCOLOR, vertColor);
		}

		if (pStage->alphaGen == AGEN_PORTAL)
		{
			GLSL_SetUniformFloat(sp, UNIFORM_PORTALRANGE, tess.shader->portalRange);
		}

		GLSL_SetUniformInt(sp, UNIFORM_COLORGEN, pStage->rgbGen);
		GLSL_SetUniformInt(sp, UNIFORM_ALPHAGEN, pStage->alphaGen);

		GLSL_SetUniformVec3(sp, UNIFORM_DIRECTEDLIGHT, dl->color);

		VectorSet(vector, 0, 0, 0);
		GLSL_SetUniformVec3(sp, UNIFORM_AMBIENTLIGHT, vector);

		VectorCopy(dl->origin, vector);
		vector[3] = 1.0f;
		GLSL_SetUniformVec4(sp, UNIFORM_LIGHTORIGIN, vector);

		GLSL_SetUniformFloat(sp, UNIFORM_LIGHTRADIUS, radius);

		GLSL_SetUniformVec4(sp, UNIFORM_NORMALSCALE, pStage->normalScale);
		GLSL_SetUniformVec4(sp, UNIFORM_SPECULARSCALE, pStage->specularScale);
		
		// include GLS_DEPTHFUNC_EQUAL so alpha tested surfaces don't add light
		// where they aren't rendered
		GL_State( GLS_SRCBLEND_ONE | GLS_DSTBLEND_ONE | GLS_DEPTHFUNC_EQUAL );

		GLSL_SetUniformMat4(sp, UNIFORM_MODELMATRIX, backEnd.or.transformMatrix);

		if (pStage->bundle[TB_DIFFUSEMAP].image[0])
			R_BindAnimatedImageToTMU( &pStage->bundle[TB_DIFFUSEMAP], TB_DIFFUSEMAP);

		// bind textures that are sampled and used in the glsl shader, and
		// bind whiteImage to textures that are sampled but zeroed in the glsl shader
		//
		// alternatives:
		//  - use the last bound texture
		//     -> costs more to sample a higher res texture then throw out the result
		//  - disable texture sampling in glsl shader with #ifdefs, as before
		//     -> increases the number of shaders that must be compiled
		//

		if (pStage->bundle[TB_NORMALMAP].image[0])
		{
			R_BindAnimatedImageToTMU( &pStage->bundle[TB_NORMALMAP], TB_NORMALMAP);
		}
		else if (r_normalMapping->integer)
			GL_BindToTMU( tr.whiteImage, TB_NORMALMAP );

		if (pStage->bundle[TB_SPECULARMAP].image[0])
		{
			R_BindAnimatedImageToTMU( &pStage->bundle[TB_SPECULARMAP], TB_SPECULARMAP);
		}
		else if (r_specularMapping->integer)
			GL_BindToTMU( tr.whiteImage, TB_SPECULARMAP );

		{
			vec4_t enableTextures;

			VectorSet4(enableTextures, 0.0f, 0.0f, 0.0f, 0.0f);
			GLSL_SetUniformVec4(sp, UNIFORM_ENABLETEXTURES, enableTextures);
		}

		if (r_dlightMode->integer >= 2)
			GL_BindToTMU(tr.shadowCubemaps[l], TB_SHADOWMAP);

		ComputeTexMods( pStage, TB_DIFFUSEMAP, texMatrix, texOffTurb );
		GLSL_SetUniformVec4(sp, UNIFORM_DIFFUSETEXMATRIX, texMatrix);
		GLSL_SetUniformVec4(sp, UNIFORM_DIFFUSETEXOFFTURB, texOffTurb);

		GLSL_SetUniformInt(sp, UNIFORM_TCGEN0, pStage->bundle[0].tcGen);

		//
		// draw
		//

		if (input->multiDrawPrimitives)
		{
			R_DrawMultiElementsVao(input->multiDrawPrimitives, input->multiDrawMinIndex, input->multiDrawMaxIndex, input->multiDrawNumIndexes, input->multiDrawFirstIndex);
		}
		else
		{
			R_DrawElementsVao(input->numIndexes, input->firstIndex, input->minIndex, input->maxIndex);
		}

		backEnd.pc.c_totalIndexes += tess.numIndexes;
		backEnd.pc.c_dlightIndexes += tess.numIndexes;
		backEnd.pc.c_dlightVertexes += tess.numVertexes;
	}
}

/*
===================
RB_FogPass

Blends a fog texture on top of everything else
===================
*/
static void RB_FogPass( void ) {
	fog_t		*fog;
	vec4_t  color;
	vec4_t	fogDistanceVector, fogDepthVector = {0, 0, 0, 0};
	float	eyeT = 0;
	shaderProgram_t *sp;

	int deformGen;
	vec5_t deformParams;

	ComputeDeformValues(&deformGen, deformParams);

	{
		int index = 0;

		if (deformGen != DGEN_NONE)
			index |= FOGDEF_USE_DEFORM_VERTEXES;

		if (glState.vertexAnimation)
			index |= FOGDEF_USE_VERTEX_ANIMATION;
		
		sp = &tr.fogShader[index];
	}

	backEnd.pc.c_fogDraws++;

	GLSL_BindProgram(sp);

	fog = tr.world->fogs + tess.fogNum;

	GLSL_SetUniformMat4(sp, UNIFORM_MODELVIEWPROJECTIONMATRIX, glState.modelviewProjection);

	GLSL_SetUniformFloat(sp, UNIFORM_VERTEXLERP, glState.vertexAttribsInterpolation);
	
	GLSL_SetUniformInt(sp, UNIFORM_DEFORMGEN, deformGen);
	if (deformGen != DGEN_NONE)
	{
		GLSL_SetUniformFloat5(sp, UNIFORM_DEFORMPARAMS, deformParams);
		GLSL_SetUniformFloat(sp, UNIFORM_TIME, tess.shaderTime);
	}

	color[0] = ((unsigned char *)(&fog->colorInt))[0] / 255.0f;
	color[1] = ((unsigned char *)(&fog->colorInt))[1] / 255.0f;
	color[2] = ((unsigned char *)(&fog->colorInt))[2] / 255.0f;
	color[3] = ((unsigned char *)(&fog->colorInt))[3] / 255.0f;
	GLSL_SetUniformVec4(sp, UNIFORM_COLOR, color);

	ComputeFogValues(fogDistanceVector, fogDepthVector, &eyeT);

	GLSL_SetUniformVec4(sp, UNIFORM_FOGDISTANCE, fogDistanceVector);
	GLSL_SetUniformVec4(sp, UNIFORM_FOGDEPTH, fogDepthVector);
	GLSL_SetUniformFloat(sp, UNIFORM_FOGEYET, eyeT);

	if ( tess.shader->fogPass == FP_EQUAL ) {
		GL_State( GLS_SRCBLEND_SRC_ALPHA | GLS_DSTBLEND_ONE_MINUS_SRC_ALPHA | GLS_DEPTHFUNC_EQUAL );
	} else {
		GL_State( GLS_SRCBLEND_SRC_ALPHA | GLS_DSTBLEND_ONE_MINUS_SRC_ALPHA );
	}

	if (tess.multiDrawPrimitives)
	{
		shaderCommands_t *input = &tess;
		R_DrawMultiElementsVao(input->multiDrawPrimitives, input->multiDrawMinIndex, input->multiDrawMaxIndex, input->multiDrawNumIndexes, input->multiDrawFirstIndex);
	}
	else
	{
		R_DrawElementsVao(tess.numIndexes, tess.firstIndex, tess.minIndex, tess.maxIndex);
	}
}

/*
=================
RB_ShadowTessEnd

triangleFromEdge[ v1 ][ v2 ]


  set triangle from edge( v1, v2, tri )
  if ( facing[ triangleFromEdge[ v1 ][ v2 ] ] && !facing[ triangleFromEdge[ v2 ][ v1 ] ) {
  }
=================
*/
void RB_ShadowTessEnd( void ) {
	int		i;
	int		numTris;
	vec3_t	lightDir;
	GLboolean rgba[4];

	// we can only do this if we have enough space in the vertex buffers
	if ( tess.numVertexes >= SHADER_MAX_VERTEXES / 2 ) {
		return;
	}

	if ( glConfig.stencilBits < 4 ) {
		return;
	}

	VectorCopy( backEnd.currentEntity->lightDir, lightDir );

	// project vertexes away from light direction
	for ( i = 0 ; i < tess.numVertexes ; i++ ) {
		VectorMA( tess.xyz[i], -512, lightDir, tess.xyz[i+tess.numVertexes] );
	}

	// decide which triangles face the light
	Com_Memset( numEdgeDefs, 0, 4 * tess.numVertexes );

	numTris = tess.numIndexes / 3;
	for ( i = 0 ; i < numTris ; i++ ) {
		int		i1, i2, i3;
		vec3_t	d1, d2, normal;
		float	*v1, *v2, *v3;
		float	d;

		i1 = tess.indexes[ i*3 + 0 ];
		i2 = tess.indexes[ i*3 + 1 ];
		i3 = tess.indexes[ i*3 + 2 ];

		v1 = tess.xyz[ i1 ];
		v2 = tess.xyz[ i2 ];
		v3 = tess.xyz[ i3 ];

		VectorSubtract( v2, v1, d1 );
		VectorSubtract( v3, v1, d2 );
		CrossProduct( d1, d2, normal );

		d = DotProduct( normal, lightDir );
		if ( d > 0 ) {
			facing[ i ] = 1;
		} else {
			facing[ i ] = 0;
		}

		// create the edges
		R_AddEdgeDef( i1, i2, facing[ i ] );
		R_AddEdgeDef( i2, i3, facing[ i ] );
		R_AddEdgeDef( i3, i1, facing[ i ] );
	}

	// draw the silhouette edges

	GL_Bind( tr.whiteImage );
	qglEnable( GL_CULL_FACE );
	GL_State( GLS_SRCBLEND_ONE | GLS_DSTBLEND_ZERO );
	qglColor3f( 0.2f, 0.2f, 0.2f );

	// don't write to the color buffer
	qglGetBooleanv(GL_COLOR_WRITEMASK, rgba);
	qglColorMask( GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE );

	qglEnable( GL_STENCIL_TEST );
	qglStencilFunc( GL_ALWAYS, 1, 255 );

	// mirrors have the culling order reversed
	if ( backEnd.viewParms.isMirror ) {
		qglCullFace( GL_FRONT );
		qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );

		R_RenderShadowEdges();

		qglCullFace( GL_BACK );
		qglStencilOp( GL_KEEP, GL_KEEP, GL_DECR );

		R_RenderShadowEdges();
	} else {
		qglCullFace( GL_BACK );
		qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );

		R_RenderShadowEdges();

//.........这里部分代码省略.........

//.........这里部分代码省略.........

			sp = &pStage->glslShaderGroup[index];

			backEnd.pc.c_lightallDraws++;
		}
		else
		{
			sp = GLSL_GetGenericShaderProgram(stage);

			backEnd.pc.c_genericDraws++;
		}

		GLSL_BindProgram(sp);

		GLSL_SetUniformMat4(sp, UNIFORM_MODELVIEWPROJECTIONMATRIX, glState.modelviewProjection);
		GLSL_SetUniformVec3(sp, UNIFORM_VIEWORIGIN, backEnd.viewParms.or.origin);
		GLSL_SetUniformVec3(sp, UNIFORM_LOCALVIEWORIGIN, backEnd.or.viewOrigin);

		GLSL_SetUniformFloat(sp, UNIFORM_VERTEXLERP, glState.vertexAttribsInterpolation);
		
		GLSL_SetUniformInt(sp, UNIFORM_DEFORMGEN, deformGen);
		if (deformGen != DGEN_NONE)
		{
			GLSL_SetUniformFloat5(sp, UNIFORM_DEFORMPARAMS, deformParams);
			GLSL_SetUniformFloat(sp, UNIFORM_TIME, tess.shaderTime);
		}

		if ( input->fogNum ) {
			GLSL_SetUniformVec4(sp, UNIFORM_FOGDISTANCE, fogDistanceVector);
			GLSL_SetUniformVec4(sp, UNIFORM_FOGDEPTH, fogDepthVector);
			GLSL_SetUniformFloat(sp, UNIFORM_FOGEYET, eyeT);
		}

		GL_State( pStage->stateBits );

		{
			vec4_t baseColor;
			vec4_t vertColor;

			ComputeShaderColors(pStage, baseColor, vertColor, pStage->stateBits);

			if ((backEnd.refdef.colorScale != 1.0f) && !(backEnd.refdef.rdflags & RDF_NOWORLDMODEL))
			{
				// use VectorScale to only scale first three values, not alpha
				VectorScale(baseColor, backEnd.refdef.colorScale, baseColor);
				VectorScale(vertColor, backEnd.refdef.colorScale, vertColor);
			}

			GLSL_SetUniformVec4(sp, UNIFORM_BASECOLOR, baseColor);
			GLSL_SetUniformVec4(sp, UNIFORM_VERTCOLOR, vertColor);
		}

		if (pStage->rgbGen == CGEN_LIGHTING_DIFFUSE)
		{
			vec4_t vec;

			VectorScale(backEnd.currentEntity->ambientLight, 1.0f / 255.0f, vec);
			GLSL_SetUniformVec3(sp, UNIFORM_AMBIENTLIGHT, vec);

			VectorScale(backEnd.currentEntity->directedLight, 1.0f / 255.0f, vec);
			GLSL_SetUniformVec3(sp, UNIFORM_DIRECTEDLIGHT, vec);
			
			VectorCopy(backEnd.currentEntity->lightDir, vec);
			vec[3] = 0.0f;
			GLSL_SetUniformVec4(sp, UNIFORM_LIGHTORIGIN, vec);
			GLSL_SetUniformVec3(sp, UNIFORM_MODELLIGHTDIR, backEnd.currentEntity->modelLightDir);

/*
=================
RB_BeginDrawingView

Any mirrored or portaled views have already been drawn, so prepare
to actually render the visible surfaces for this view
=================
*/
void RB_BeginDrawingView( void )
{
	int clearBits = 0;

	// sync with gl if needed
	if ( r_finish->integer == 1 && !glState.finishCalled )
	{
		glFinish();
		glState.finishCalled = qtrue;
	}

	if ( r_finish->integer == 0 )
	{
		glState.finishCalled = qtrue;
	}

	// we will need to change the projection matrix before drawing
	// 2D images again
	backEnd.projection2D = qfalse;

	//
	// set the modelview matrix for the viewer
	//
	SetViewportAndScissor();

	// ensures that depth writes are enabled for the depth clear
	GL_State( GLS_DEFAULT );

////////// (SA) modified to ensure one glclear() per frame at most

	// clear relevant buffers
	clearBits = 0;

	clearBits |= GL_STENCIL_BUFFER_BIT;

//  if(r_uiFullScreen->integer) {
//      clearBits = GL_DEPTH_BUFFER_BIT;    // (SA) always just clear depth for menus
//  } else
	// ydnar: global q3 fog volume
	if ( tr.world && tr.world->globalFog >= 0 )
	{
		clearBits |= GL_DEPTH_BUFFER_BIT;
		clearBits |= GL_COLOR_BUFFER_BIT;
		//
		glClearColor( tr.world->fogs[ tr.world->globalFog ].shader->fogParms.color[ 0 ] * tr.identityLight,
		              tr.world->fogs[ tr.world->globalFog ].shader->fogParms.color[ 1 ] * tr.identityLight,
		              tr.world->fogs[ tr.world->globalFog ].shader->fogParms.color[ 2 ] * tr.identityLight, 1.0 );
	}
	else if ( skyboxportal )
	{
		if ( backEnd.refdef.rdflags & RDF_SKYBOXPORTAL )
		{
			// portal scene, clear whatever is necessary
			clearBits |= GL_DEPTH_BUFFER_BIT;

			if ( r_fastsky->integer || backEnd.refdef.rdflags & RDF_NOWORLDMODEL )
			{
				// fastsky: clear color
				// try clearing first with the portal sky fog color, then the world fog color, then finally a default
				clearBits |= GL_COLOR_BUFFER_BIT;

				if ( glfogsettings[ FOG_PORTALVIEW ].registered )
				{
					glClearColor( glfogsettings[ FOG_PORTALVIEW ].color[ 0 ], glfogsettings[ FOG_PORTALVIEW ].color[ 1 ],
					              glfogsettings[ FOG_PORTALVIEW ].color[ 2 ], glfogsettings[ FOG_PORTALVIEW ].color[ 3 ] );
				}
				else if ( glfogNum > FOG_NONE && glfogsettings[ FOG_CURRENT ].registered )
				{
					glClearColor( glfogsettings[ FOG_CURRENT ].color[ 0 ], glfogsettings[ FOG_CURRENT ].color[ 1 ],
					              glfogsettings[ FOG_CURRENT ].color[ 2 ], glfogsettings[ FOG_CURRENT ].color[ 3 ] );
				}
				else
				{
//                  glClearColor ( 1.0, 0.0, 0.0, 1.0 );   // red clear for testing portal sky clear
					glClearColor( 0.5, 0.5, 0.5, 1.0 );
				}
			}
			else
			{
				// rendered sky (either clear color or draw quake sky)
				if ( glfogsettings[ FOG_PORTALVIEW ].registered )
				{
					glClearColor( glfogsettings[ FOG_PORTALVIEW ].color[ 0 ], glfogsettings[ FOG_PORTALVIEW ].color[ 1 ],
					              glfogsettings[ FOG_PORTALVIEW ].color[ 2 ], glfogsettings[ FOG_PORTALVIEW ].color[ 3 ] );

					if ( glfogsettings[ FOG_PORTALVIEW ].clearscreen )
					{
						// portal fog requests a screen clear (distance fog rather than quake sky)
						clearBits |= GL_COLOR_BUFFER_BIT;
					}
				}
			}
//.........这里部分代码省略.........

//.........这里部分代码省略.........
		if ( surfaceStage->lighting == SL_AMBIENT ) {
			continue;
		}

		// ignore stages that fail the condition
		if ( !surfaceRegs[ surfaceStage->conditionRegister ] ) {
			continue;
		}

		//-----------------------------------------------------
		//
		// bump / falloff
		//
		//-----------------------------------------------------
		if ( surfaceStage->lighting == SL_BUMP ) {
			// render light falloff * bumpmap lighting

			if ( surfaceStage->vertexColor != SVC_IGNORE ) {
				common->Printf( "shader %s: vertexColor on a bump stage\n",
					surfaceShader->GetName() );
			}

			// check for RGBA modulations in the stage, which are also illegal?

			// save the bump map stage for the specular calculation and diffuse
			// error checking
			lastBumpStage = surfaceStage;

			//
			// ambient lights combine non-directional bump and falloff
			// and write to the alpha channel
			//
			if ( lightShader->IsAmbientLight() ) {
				GL_State( GLS_COLORMASK | GLS_DEPTHMASK | backEnd.depthFunc );

				// texture 0 will be the per-surface bump map
				GL_SelectTexture( 0 );
				qglEnableClientState( GL_TEXTURE_COORD_ARRAY );

				RB_BindStageTexture( surfaceRegs, &surfaceStage->texture, surf );
				// development aid
				if ( r_skipBump.GetBool() ) {
					globalImages->flatNormalMap->Bind();
				}

				// texture 1 will be the light falloff
				GL_SelectTexture( 1 );

				qglEnable( GL_TEXTURE_GEN_S );
				qglTexGenfv( GL_S, GL_OBJECT_PLANE, lightProject[3].ToFloatPtr() );
				qglTexCoord2f( 0, 0.5 );
				vLight->falloffImage->Bind();

				qglCombinerParameteriNV( GL_NUM_GENERAL_COMBINERS_NV, 2 );

				// set the constant color to a bit of an angle
				qglCombinerParameterfvNV( GL_CONSTANT_COLOR0_NV, tr.ambientLightVector.ToFloatPtr() );

				// stage 0 sets primary_color = bump dot constant color
				qglCombinerInputNV( GL_COMBINER0_NV, GL_RGB, GL_VARIABLE_A_NV, 
					GL_CONSTANT_COLOR0_NV, GL_EXPAND_NORMAL_NV, GL_RGB );
				qglCombinerInputNV( GL_COMBINER0_NV, GL_RGB, GL_VARIABLE_B_NV, 
					GL_TEXTURE0_ARB, GL_EXPAND_NORMAL_NV, GL_RGB );
				qglCombinerOutputNV( GL_COMBINER0_NV, GL_RGB, 
					GL_PRIMARY_COLOR_NV, GL_DISCARD_NV, GL_DISCARD_NV,
					GL_NONE, GL_NONE, GL_TRUE, GL_FALSE, GL_FALSE );

/*
=================
RB_BeginDrawingView

Any mirrored or portaled views have already been drawn, so prepare
to actually render the visible surfaces for this view
=================
*/
void RB_BeginDrawingView (void) {
	int clearBits = 0;

	// sync with gl if needed
	if ( r_finish->integer == 1 && !glState.finishCalled ) {
		qglFinish ();
		glState.finishCalled = qtrue;
	}
	if ( r_finish->integer == 0 ) {
		glState.finishCalled = qtrue;
	}

	// we will need to change the projection matrix before drawing
	// 2D images again
	backEnd.projection2D = qfalse;

	//
	// set the modelview matrix for the viewer
	//
	SetViewportAndScissor();

	// ensures that depth writes are enabled for the depth clear
	GL_State( GLS_DEFAULT );
	// clear relevant buffers
	clearBits = GL_DEPTH_BUFFER_BIT;

	if ( r_measureOverdraw->integer || r_shadows->integer == 2 )
	{
		clearBits |= GL_STENCIL_BUFFER_BIT;
	}
	if ( r_fastsky->integer && !( backEnd.refdef.rdflags & RDF_NOWORLDMODEL ) )
	{
		clearBits |= GL_COLOR_BUFFER_BIT;	// FIXME: only if sky shaders have been used
#ifdef _DEBUG
		qglClearColor( 0.8f, 0.7f, 0.4f, 1.0f );	// FIXME: get color of sky
#else
		qglClearColor( 0.0f, 0.0f, 0.0f, 1.0f );	// FIXME: get color of sky
#endif
	}
#ifdef VCMODS_DEPTH
	qglClear( clearBits | GL_COLOR_BUFFER_BIT);
#else
	qglClear( clearBits );
#endif

	if ( ( backEnd.refdef.rdflags & RDF_HYPERSPACE ) )
	{
		RB_Hyperspace();
		return;
	}
	else
	{
		backEnd.isHyperspace = qfalse;
	}

	glState.faceCulling = -1;		// force face culling to set next time

	// we will only draw a sun if there was sky rendered in this view
	backEnd.skyRenderedThisView = qfalse;

	// clip to the plane of the portal
	if ( backEnd.viewParms.isPortal ) {
		float	plane[4];
#ifdef VCMODS_OPENGLES
		float	plane2[4];
#else
		double	plane2[4];
#endif

		plane[0] = backEnd.viewParms.portalPlane.normal[0];
		plane[1] = backEnd.viewParms.portalPlane.normal[1];
		plane[2] = backEnd.viewParms.portalPlane.normal[2];
		plane[3] = backEnd.viewParms.portalPlane.dist;

		plane2[0] = DotProduct (backEnd.viewParms.or.axis[0], plane);
		plane2[1] = DotProduct (backEnd.viewParms.or.axis[1], plane);
		plane2[2] = DotProduct (backEnd.viewParms.or.axis[2], plane);
		plane2[3] = DotProduct (plane, backEnd.viewParms.or.origin) - plane[3];

		qglLoadMatrixf( s_flipMatrix );
		qglClipPlane (GL_CLIP_PLANE0, plane2);
		qglEnable (GL_CLIP_PLANE0);
	} else {
		qglDisable (GL_CLIP_PLANE0);
	}
}

void FBO_BlitFromTexture(struct image_s *src, vec4_t inSrcTexCorners, vec2_t inSrcTexScale, FBO_t *dst, ivec4_t inDstBox, struct shaderProgram_s *shaderProgram, vec4_t inColor, int blend)
{
	ivec4_t dstBox;
	vec4_t color;
	vec4_t quadVerts[4];
	vec2_t texCoords[4];
	vec2_t invTexRes;
	FBO_t *oldFbo = glState.currentFBO;
	mat4_t projection;
	int width, height;

	if (!src)
	{
		ri.Printf(PRINT_WARNING, "Tried to blit from a NULL texture!\n");
		return;
	}

	width  = dst ? dst->width  : glConfig.vidWidth;
	height = dst ? dst->height : glConfig.vidHeight;

	if (inSrcTexCorners)
	{
		VectorSet2(texCoords[0], inSrcTexCorners[0], inSrcTexCorners[1]);
		VectorSet2(texCoords[1], inSrcTexCorners[2], inSrcTexCorners[1]);
		VectorSet2(texCoords[2], inSrcTexCorners[2], inSrcTexCorners[3]);
		VectorSet2(texCoords[3], inSrcTexCorners[0], inSrcTexCorners[3]);
	}
	else
	{
		VectorSet2(texCoords[0], 0.0f, 1.0f);
		VectorSet2(texCoords[1], 1.0f, 1.0f);
		VectorSet2(texCoords[2], 1.0f, 0.0f);
		VectorSet2(texCoords[3], 0.0f, 0.0f);
	}

	// framebuffers are 0 bottom, Y up.
	if (inDstBox)
	{
		dstBox[0] = inDstBox[0];
		dstBox[1] = height - inDstBox[1] - inDstBox[3];
		dstBox[2] = inDstBox[0] + inDstBox[2];
		dstBox[3] = height - inDstBox[1];
	}
	else
	{
		VectorSet4(dstBox, 0, height, width, 0);
	}

	if (inSrcTexScale)
	{
		VectorCopy2(inSrcTexScale, invTexRes);
	}
	else
	{
		VectorSet2(invTexRes, 1.0f, 1.0f);
	}

	if (inColor)
	{
		VectorCopy4(inColor, color);
	}
	else
	{
		VectorCopy4(colorWhite, color);
	}

	if (!shaderProgram)
	{
		shaderProgram = &tr.textureColorShader;
	}

	FBO_Bind(dst);

	qglViewport( 0, 0, width, height );
	qglScissor( 0, 0, width, height );

	Mat4Ortho(0, width, height, 0, 0, 1, projection);

	GL_Cull( CT_TWO_SIDED );

	GL_BindToTMU(src, TB_COLORMAP);

	VectorSet4(quadVerts[0], dstBox[0], dstBox[1], 0.0f, 1.0f);
	VectorSet4(quadVerts[1], dstBox[2], dstBox[1], 0.0f, 1.0f);
	VectorSet4(quadVerts[2], dstBox[2], dstBox[3], 0.0f, 1.0f);
	VectorSet4(quadVerts[3], dstBox[0], dstBox[3], 0.0f, 1.0f);

	invTexRes[0] /= src->width;
	invTexRes[1] /= src->height;

	GL_State( blend );

	GLSL_BindProgram(shaderProgram);
	
	GLSL_SetUniformMat4(shaderProgram, UNIFORM_MODELVIEWPROJECTIONMATRIX, projection);
	GLSL_SetUniformVec4(shaderProgram, UNIFORM_COLOR, color);
	GLSL_SetUniformVec2(shaderProgram, UNIFORM_INVTEXRES, invTexRes);
	GLSL_SetUniformVec2(shaderProgram, UNIFORM_AUTOEXPOSUREMINMAX, tr.refdef.autoExposureMinMax);
	GLSL_SetUniformVec3(shaderProgram, UNIFORM_TONEMINAVGMAXLINEAR, tr.refdef.toneMinAvgMaxLinear);

//.........这里部分代码省略.........

void CQuickSpriteSystem::Flush(void)
{
	if (mNextVert==0)
	{
		return;
	}

	//
	// render the main pass
	//
	R_BindAnimatedImage( mTexBundle );
	GL_State(mGLStateBits);

	//
	// set arrays and lock
	//
	qglEnableClientState( GL_TEXTURE_COORD_ARRAY);
	qglTexCoordPointer( 2, GL_FLOAT, 0, mTextureCoords );

	qglEnableClientState( GL_COLOR_ARRAY);
	qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, mColors );

	qglVertexPointer (3, GL_FLOAT, 16, mVerts);

	if ( qglLockArraysEXT )
	{
		qglLockArraysEXT(0, mNextVert);
		GLimp_LogComment( "glLockArraysEXT\n" );
	}

	qglDrawArrays(GL_QUADS, 0, mNextVert);

	backEnd.pc.c_vertexes += mNextVert;
	backEnd.pc.c_indexes += mNextVert;
	backEnd.pc.c_totalIndexes += mNextVert;

	if (mUseFog)
	{
		//
		// render the fog pass
		//
		GL_Bind( tr.fogImage );
		GL_State( GLS_SRCBLEND_SRC_ALPHA | GLS_DSTBLEND_ONE_MINUS_SRC_ALPHA | GLS_DEPTHFUNC_EQUAL );

		//
		// set arrays and lock
		//
		qglTexCoordPointer( 2, GL_FLOAT, 0, mFogTextureCoords);
//		qglEnableClientState( GL_TEXTURE_COORD_ARRAY);	// Done above

		qglDisableClientState( GL_COLOR_ARRAY );
		qglColor4ubv((GLubyte *)&mFogColor);

//		qglVertexPointer (3, GL_FLOAT, 16, mVerts);	// Done above

		qglDrawArrays(GL_QUADS, 0, mNextVert);

		// Second pass from fog
		backEnd.pc.c_totalIndexes += mNextVert;
	}

	// 
	// unlock arrays
	//
	if (qglUnlockArraysEXT) 
	{
		qglUnlockArraysEXT();
		GLimp_LogComment( "glUnlockArraysEXT\n" );
	}

	mNextVert=0;
}

/*
=================
RB_BeginDrawingView

Any mirrored or portaled views have already been drawn, so prepare
to actually render the visible surfaces for this view
=================
*/
static void RB_BeginDrawingView (void) {
	int clearBits = GL_DEPTH_BUFFER_BIT;

	// sync with gl if needed
	if ( r_finish->integer == 1 && !glState.finishCalled ) {
		qglFinish ();
		glState.finishCalled = qtrue;
	}
	if ( r_finish->integer == 0 ) {
		glState.finishCalled = qtrue;
	}

	// we will need to change the projection matrix before drawing
	// 2D images again
	backEnd.projection2D = qfalse;

	//
	// set the modelview matrix for the viewer
	//
	SetViewportAndScissor();

	// ensures that depth writes are enabled for the depth clear
	GL_State( GLS_DEFAULT );

	// clear relevant buffers
	if ( r_measureOverdraw->integer || r_shadows->integer == 2 || tr_stencilled )
	{
		clearBits |= GL_STENCIL_BUFFER_BIT;
		tr_stencilled = false;
	}

	if (skyboxportal)
	{
		if ( backEnd.refdef.rdflags & RDF_SKYBOXPORTAL )
		{	// portal scene, clear whatever is necessary
			if (r_fastsky->integer || (backEnd.refdef.rdflags & RDF_NOWORLDMODEL) )
			{	// fastsky: clear color
				// try clearing first with the portal sky fog color, then the world fog color, then finally a default
				clearBits |= GL_COLOR_BUFFER_BIT;
				if (tr.world && tr.world->globalFog != -1)
				{
					const fog_t		*fog = &tr.world->fogs[tr.world->globalFog];
					qglClearColor(fog->parms.color[0],  fog->parms.color[1], fog->parms.color[2], 1.0f );
				}
				else
				{
					qglClearColor ( 0.3f, 0.3f, 0.3f, 1.0 );
				}
			}			
		}
	}
	else
	{
		if ( r_fastsky->integer && !( backEnd.refdef.rdflags & RDF_NOWORLDMODEL ) && !g_bRenderGlowingObjects )
		{
			if (tr.world && tr.world->globalFog != -1)
			{
				const fog_t		*fog = &tr.world->fogs[tr.world->globalFog];
				qglClearColor(fog->parms.color[0],  fog->parms.color[1], fog->parms.color[2], 1.0f );
			}
			else
			{
				qglClearColor( 0.3f, 0.3f, 0.3f, 1 );	// FIXME: get color of sky
			}
			clearBits |= GL_COLOR_BUFFER_BIT;	// FIXME: only if sky shaders have been used
		}
	}

	if ( !( backEnd.refdef.rdflags & RDF_NOWORLDMODEL ) && ( r_DynamicGlow->integer && !g_bRenderGlowingObjects ) )
	{
		if (tr.world && tr.world->globalFog != -1)
		{ //this is because of a bug in multiple scenes I think, it needs to clear for the second scene but it doesn't normally.
			const fog_t		*fog = &tr.world->fogs[tr.world->globalFog];

			qglClearColor(fog->parms.color[0],  fog->parms.color[1], fog->parms.color[2], 1.0f );
			clearBits |= GL_COLOR_BUFFER_BIT;
		}
	}
	// If this pass is to just render the glowing objects, don't clear the depth buffer since
	// we're sharing it with the main scene (since the main scene has already been rendered). -AReis
	if ( g_bRenderGlowingObjects )
	{
		clearBits &= ~GL_DEPTH_BUFFER_BIT;
	}

	if (clearBits)
	{
		qglClear( clearBits );
	}

	if ( ( backEnd.refdef.rdflags & RDF_HYPERSPACE ) )
	{
//.........这里部分代码省略.........

// Draw the glow blur over the screen additively.
static inline void RB_DrawGlowOverlay()
{
	qglDisable (GL_CLIP_PLANE0);
	GL_Cull( CT_TWO_SIDED );

	// Go into orthographic 2d mode.
	qglMatrixMode(GL_PROJECTION);
	qglPushMatrix();
	qglLoadIdentity();
	qglOrtho(0, glConfig.vidWidth, glConfig.vidHeight, 0, -1, 1);
	qglMatrixMode(GL_MODELVIEW);
	qglPushMatrix();
	qglLoadIdentity();

	GL_State(GLS_DEPTHTEST_DISABLE);

	qglDisable( GL_TEXTURE_2D );
	qglEnable( GL_TEXTURE_RECTANGLE_EXT );

	// For debug purposes.
	if ( r_DynamicGlow->integer != 2 )
	{
		// Render the normal scene texture.
		qglBindTexture( GL_TEXTURE_RECTANGLE_EXT, tr.sceneImage ); 
		qglBegin(GL_QUADS);    
			qglColor4f( 1.0f, 1.0f, 1.0f, 1.0f );
			qglTexCoord2f( 0, glConfig.vidHeight ); 
			qglVertex2f( 0, 0 );

			qglTexCoord2f( 0, 0 );
			qglVertex2f( 0, glConfig.vidHeight );

			qglTexCoord2f( glConfig.vidWidth, 0 );
			qglVertex2f( glConfig.vidWidth, glConfig.vidHeight );

			qglTexCoord2f( glConfig.vidWidth, glConfig.vidHeight );
			qglVertex2f( glConfig.vidWidth, 0 );
		qglEnd();
	}

	// One and Inverse Src Color give a very soft addition, while one one is a bit stronger. With one one we can
	// use additive blending through multitexture though.
	if ( r_DynamicGlowSoft->integer )
	{
		qglBlendFunc( GL_ONE, GL_ONE_MINUS_SRC_COLOR );
	}
	else
	{
		qglBlendFunc( GL_ONE, GL_ONE );
	}
	qglEnable( GL_BLEND );  

	// Now additively render the glow texture.
	qglBindTexture( GL_TEXTURE_RECTANGLE_EXT, tr.blurImage );     
	qglBegin(GL_QUADS);    
		qglColor4f( 1.0f, 1.0f, 1.0f, 1.0f );  
		qglTexCoord2f( 0, r_DynamicGlowHeight->integer ); 
		qglVertex2f( 0, 0 );

		qglTexCoord2f( 0, 0 );
		qglVertex2f( 0, glConfig.vidHeight );

		qglTexCoord2f( r_DynamicGlowWidth->integer, 0 );
		qglVertex2f( glConfig.vidWidth, glConfig.vidHeight );

		qglTexCoord2f( r_DynamicGlowWidth->integer, r_DynamicGlowHeight->integer );
		qglVertex2f( glConfig.vidWidth, 0 );
	qglEnd();

	qglDisable( GL_TEXTURE_RECTANGLE_EXT );
	qglEnable( GL_TEXTURE_2D );
	qglBlendFunc( GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR );
	qglDisable( GL_BLEND );

	qglMatrixMode(GL_PROJECTION);
	qglPopMatrix();
	qglMatrixMode(GL_MODELVIEW);
	qglPopMatrix();
}

//.........这里部分代码省略.........
			continue;
		}

		//don't have fog enabled when we redraw with alpha test, or it will double over
		//and screw the tri up -rww
		if (r_drawfog->value == 2 &&
			tr.world &&
			(tess.fogNum == tr.world->globalFog || tess.fogNum == tr.world->numfogs))
		{
			fogging = qglIsEnabled(GL_FOG);

			if (fogging)
			{
				qglDisable(GL_FOG);
			}
		}
		else
		{
			fogging = 0;
		}


		dStage = NULL;
		if (tess.shader && qglActiveTextureARB)
		{
			int i = 0;
			while (i < tess.shader->numUnfoggedPasses)
			{
				const int blendBits = (GLS_SRCBLEND_BITS+GLS_DSTBLEND_BITS);
				if (((tess.shader->stages[i].bundle[0].image && !tess.shader->stages[i].bundle[0].isLightmap && !tess.shader->stages[i].bundle[0].numTexMods) ||
					 (tess.shader->stages[i].bundle[1].image && !tess.shader->stages[i].bundle[1].isLightmap && !tess.shader->stages[i].bundle[1].numTexMods)) &&
					(tess.shader->stages[i].stateBits & blendBits) == 0 )
				{ //only use non-lightmap opaque stages
                    dStage = &tess.shader->stages[i];
					break;
				}
				i++;
			}
		}

		if (dStage)
		{
			GL_SelectTexture( 0 );
			GL_State(0);
			qglTexCoordPointer( 2, GL_FLOAT, 0, tess.svars.texcoords[0] );
			if (dStage->bundle[0].image && !dStage->bundle[0].isLightmap && !dStage->bundle[0].numTexMods)
			{
				R_BindAnimatedImage( &dStage->bundle[0] );
			}
			else
			{
				R_BindAnimatedImage( &dStage->bundle[1] );
			}

			GL_SelectTexture( 1 );
			qglEnable( GL_TEXTURE_2D );
			qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
			qglTexCoordPointer( 2, GL_FLOAT, 0, texCoordsArray[0] );
			qglEnableClientState( GL_COLOR_ARRAY );
			qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, colorArray );
			GL_Bind( tr.dlightImage );
			GL_TexEnv( GL_MODULATE );

			GL_State(GLS_SRCBLEND_ONE | GLS_DSTBLEND_ONE | GLS_DEPTHFUNC_EQUAL);// | GLS_ATEST_GT_0);

			R_DrawElements( numIndexes, hitIndexes );

			qglDisable( GL_TEXTURE_2D );
			GL_SelectTexture(0);
		}
		else
		{
			qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
			qglTexCoordPointer( 2, GL_FLOAT, 0, texCoordsArray[0] );

			qglEnableClientState( GL_COLOR_ARRAY );
			qglColorPointer( 4, GL_UNSIGNED_BYTE, 0, colorArray );

			GL_Bind( tr.dlightImage );
			// include GLS_DEPTHFUNC_EQUAL so alpha tested surfaces don't add light
			// where they aren't rendered
			if ( dl->additive ) {
				GL_State( GLS_SRCBLEND_ONE | GLS_DSTBLEND_ONE | GLS_DEPTHFUNC_EQUAL );
			}
			else {
				GL_State( GLS_SRCBLEND_DST_COLOR | GLS_DSTBLEND_ONE | GLS_DEPTHFUNC_EQUAL );
			}

			R_DrawElements( numIndexes, hitIndexes );
		}

		if (fogging)
		{
			qglEnable(GL_FOG);
		}

		backEnd.pc.c_totalIndexes += numIndexes;
		backEnd.pc.c_dlightIndexes += numIndexes;
	}
}