C++ F_SET函数代码示例

//.........这里部分代码省略.........
		entry->flags = flags;
		entry->count = count;
		entry->bloom_bit_count = bloom_bit_count;
		entry->bloom_hash_count = bloom_hash_count;
		++cjoin->entries_next;
	} else {
		/* Merge the join into an existing entry for this index */
		if (count != 0 && entry->count != 0 && entry->count != count)
			WT_ERR_MSG(session, EINVAL,
			    "count=%" PRIu64 " does not match "
			    "previous count=%" PRIu64 " for this index",
			    count, entry->count);
		if (LF_MASK(WT_CURJOIN_ENTRY_BLOOM) !=
		    F_MASK(entry, WT_CURJOIN_ENTRY_BLOOM))
			WT_ERR_MSG(session, EINVAL,
			    "join has incompatible strategy "
			    "values for the same index");

		/*
		 * Check against other comparisons (we call them endpoints)
		 * already set up for this index.
		 * We allow either:
		 *   - one or more "eq" (with disjunction)
		 *   - exactly one "eq" (with conjunction)
		 *   - exactly one of "gt" or "ge" (conjunction or disjunction)
		 *   - exactly one of "lt" or "le" (conjunction or disjunction)
		 *   - one of "gt"/"ge" along with one of "lt"/"le"
		 *         (currently restricted to conjunction).
		 *
		 * Some other combinations, although expressible either do
		 * not make sense (X == 3 AND X == 5) or are reducible (X <
		 * 7 AND X < 9).  Other specific cases of (X < 7 OR X > 15)
		 * or (X == 4 OR X > 15) make sense but we don't handle yet.
		 */
		for (i = 0; i < entry->ends_next; i++) {
			end = &entry->ends[i];
			range_eq = (range == WT_CURJOIN_END_EQ);
			if ((F_ISSET(end, WT_CURJOIN_END_GT) &&
			    ((range & WT_CURJOIN_END_GT) != 0 || range_eq)) ||
			    (F_ISSET(end, WT_CURJOIN_END_LT) &&
			    ((range & WT_CURJOIN_END_LT) != 0 || range_eq)) ||
			    (end->flags == WT_CURJOIN_END_EQ &&
			    (range & (WT_CURJOIN_END_LT | WT_CURJOIN_END_GT))
			    != 0))
				WT_ERR_MSG(session, EINVAL,
				    "join has overlapping ranges");
			if (range == WT_CURJOIN_END_EQ &&
			    end->flags == WT_CURJOIN_END_EQ &&
			    !F_ISSET(entry, WT_CURJOIN_ENTRY_DISJUNCTION))
				WT_ERR_MSG(session, EINVAL,
				    "compare=eq can only be combined "
				    "using operation=or");

			/*
			 * Sort "gt"/"ge" to the front, followed by any number
			 * of "eq", and finally "lt"/"le".
			 */
			if (!hasins &&
			    ((range & WT_CURJOIN_END_GT) != 0 ||
			    (range == WT_CURJOIN_END_EQ &&
			    !F_ISSET(end, WT_CURJOIN_END_GT)))) {
				ins = i;
				hasins = true;
			}
		}
		/* All checks completed, merge any new configuration now */
		entry->count = count;
		entry->bloom_bit_count =
		    WT_MAX(entry->bloom_bit_count, bloom_bit_count);
		entry->bloom_hash_count =
		    WT_MAX(entry->bloom_hash_count, bloom_hash_count);
	}
	WT_ERR(__wt_realloc_def(session, &entry->ends_allocated,
	    entry->ends_next + 1, &entry->ends));
	if (!hasins)
		ins = entry->ends_next;
	newend = &entry->ends[ins];
	memmove(newend + 1, newend,
	    (entry->ends_next - ins) * sizeof(WT_CURSOR_JOIN_ENDPOINT));
	memset(newend, 0, sizeof(WT_CURSOR_JOIN_ENDPOINT));
	entry->ends_next++;
	newend->cursor = ref_cursor;
	F_SET(newend, range);

	/* Open the main file with a projection of the indexed columns. */
	if (entry->main == NULL && entry->index != NULL) {
		namesize = strlen(cjoin->table->name);
		newsize = namesize + entry->index->colconf.len + 1;
		WT_ERR(__wt_calloc(session, 1, newsize, &main_uri));
		snprintf(main_uri, newsize, "%s%.*s",
		    cjoin->table->name, (int)entry->index->colconf.len,
		    entry->index->colconf.str);
		WT_ERR(__wt_open_cursor(session, main_uri,
		    (WT_CURSOR *)cjoin, raw_cfg, &entry->main));
	}

err:	if (main_uri != NULL)
		__wt_free(session, main_uri);
	return (ret);
}

/*
 * __wt_connection_close --
 *	Close a connection handle.
 */
int
__wt_connection_close(WT_CONNECTION_IMPL *conn)
{
	WT_CONNECTION *wt_conn;
	WT_DECL_RET;
	WT_DLH *dlh;
	WT_SESSION_IMPL *s, *session;
	u_int i;

	wt_conn = &conn->iface;
	session = conn->default_session;

	/* Shut down the subsystems, ensuring workers see the state change. */
	F_SET(conn, WT_CONN_CLOSING);
	WT_FULL_BARRIER();

	/*
	 * Clear any pending async operations and shut down the async worker
	 * threads and system before closing LSM.
	 */
	WT_TRET(__wt_async_flush(session));
	WT_TRET(__wt_async_destroy(session));

	/*
	 * Shut down server threads other than the eviction server, which is
	 * needed later to close btree handles.  Some of these threads access
	 * btree handles, so take care in ordering shutdown to make sure they
	 * exit before files are closed.
	 */
	WT_TRET(__wt_lsm_manager_destroy(session));

	/*
	 * Once the async and LSM threads exit, we shouldn't be opening any
	 * more files.
	 */
	F_SET(conn, WT_CONN_CLOSING_NO_MORE_OPENS);
	WT_FULL_BARRIER();

	WT_TRET(__wt_checkpoint_server_destroy(session));
	WT_TRET(__wt_statlog_destroy(session, true));
	WT_TRET(__wt_sweep_destroy(session));

	/* The eviction server is shut down last. */
	WT_TRET(__wt_evict_destroy(session));

	/* Close open data handles. */
	WT_TRET(__wt_conn_dhandle_discard(session));

	/* Shut down metadata tracking. */
	WT_TRET(__wt_meta_track_destroy(session));

	/*
	 * Now that all data handles are closed, tell logging that a checkpoint
	 * has completed then shut down the log manager (only after closing
	 * data handles).  The call to destroy the log manager is outside the
	 * conditional because we allocate the log path so that printlog can
	 * run without running logging or recovery.
	 */
	if (ret == 0 && FLD_ISSET(conn->log_flags, WT_CONN_LOG_ENABLED) &&
	    FLD_ISSET(conn->log_flags, WT_CONN_LOG_RECOVER_DONE))
		WT_TRET(__wt_txn_checkpoint_log(
		    session, true, WT_TXN_LOG_CKPT_STOP, NULL));
	WT_TRET(__wt_logmgr_destroy(session));

	/* Free memory for collators, compressors, data sources. */
	WT_TRET(__wt_conn_remove_collator(session));
	WT_TRET(__wt_conn_remove_compressor(session));
	WT_TRET(__wt_conn_remove_data_source(session));
	WT_TRET(__wt_conn_remove_encryptor(session));
	WT_TRET(__wt_conn_remove_extractor(session));

	/* Disconnect from shared cache - must be before cache destroy. */
	WT_TRET(__wt_conn_cache_pool_destroy(session));

	/* Discard the cache. */
	WT_TRET(__wt_cache_destroy(session));

	/* Discard transaction state. */
	__wt_txn_global_destroy(session);

	/* Close the lock file, opening up the database to other connections. */
	if (conn->lock_fh != NULL)
		WT_TRET(__wt_close(session, &conn->lock_fh));

	/* Close any optrack files */
	if (session->optrack_fh != NULL)
		WT_TRET(__wt_close(session, &session->optrack_fh));

	/* Close operation tracking */
	WT_TRET(__wt_conn_optrack_teardown(session, false));

	/* Close any file handles left open. */
	WT_TRET(__wt_close_connection_close(session));

	/*
	 * Close the internal (default) session, and switch back to the dummy
//.........这里部分代码省略.........

/*
 * __lsm_bloom_create --
 *	Create a bloom filter for a chunk of the LSM tree that has been
 *	checkpointed but not yet been merged.
 */
static int
__lsm_bloom_create(WT_SESSION_IMPL *session,
    WT_LSM_TREE *lsm_tree, WT_LSM_CHUNK *chunk, u_int chunk_off)
{
	WT_BLOOM *bloom;
	WT_CURSOR *src;
	WT_DECL_RET;
	WT_ITEM key;
	uint64_t insert_count;

	WT_RET(__wt_lsm_tree_setup_bloom(session, lsm_tree, chunk));

	bloom = NULL;
	/*
	 * This is merge-like activity, and we don't want compacts to give up
	 * because we are creating a bunch of bloom filters before merging.
	 */
	++lsm_tree->merge_progressing;
	WT_RET(__wt_bloom_create(session, chunk->bloom_uri,
	    lsm_tree->bloom_config, chunk->count,
	    lsm_tree->bloom_bit_count, lsm_tree->bloom_hash_count, &bloom));

	/* Open a special merge cursor just on this chunk. */
	WT_ERR(__wt_open_cursor(session, lsm_tree->name, NULL, NULL, &src));
	F_SET(src, WT_CURSTD_RAW);
	WT_ERR(__wt_clsm_init_merge(src, chunk_off, chunk->id, 1));

	/*
	 * Setup so that we don't hold pages we read into cache, and so
	 * that we don't get stuck if the cache is full. If we allow
	 * ourselves to get stuck creating bloom filters, the entire tree
	 * can stall since there may be no worker threads available to flush.
	 */
	F_SET(session, WT_SESSION_NO_CACHE | WT_SESSION_NO_EVICTION);
	for (insert_count = 0; (ret = src->next(src)) == 0; insert_count++) {
		WT_ERR(src->get_key(src, &key));
		__wt_bloom_insert(bloom, &key);
	}
	WT_ERR_NOTFOUND_OK(ret);
	WT_TRET(src->close(src));

	WT_TRET(__wt_bloom_finalize(bloom));
	WT_ERR(ret);

	F_CLR(session, WT_SESSION_NO_CACHE);

	/* Load the new Bloom filter into cache. */
	WT_CLEAR(key);
	WT_ERR_NOTFOUND_OK(__wt_bloom_get(bloom, &key));

	__wt_verbose(session, WT_VERB_LSM,
	    "LSM worker created bloom filter %s. "
	    "Expected %" PRIu64 " items, got %" PRIu64,
	    chunk->bloom_uri, chunk->count, insert_count);

	/* Ensure the bloom filter is in the metadata. */
	__wt_lsm_tree_writelock(session, lsm_tree);
	F_SET(chunk, WT_LSM_CHUNK_BLOOM);
	ret = __wt_lsm_meta_write(session, lsm_tree);
	++lsm_tree->dsk_gen;
	__wt_lsm_tree_writeunlock(session, lsm_tree);

	if (ret != 0)
		WT_ERR_MSG(session, ret, "LSM bloom worker metadata write");

err:	if (bloom != NULL)
		WT_TRET(__wt_bloom_close(bloom));
	F_CLR(session, WT_SESSION_NO_CACHE | WT_SESSION_NO_EVICTION);
	return (ret);
}

/*
 * __wt_block_read_off --
 *	Read an addr/size pair referenced block into a buffer.
 */
int
__wt_block_read_off(WT_SESSION_IMPL *session,
    WT_BLOCK *block, WT_ITEM *buf, off_t offset, uint32_t size, uint32_t cksum)
{
	WT_BLOCK_HEADER *blk;
	uint32_t alloc_size, page_cksum;

	WT_VERBOSE_RET(session, read,
	    "off %" PRIuMAX ", size %" PRIu32 ", cksum %" PRIu32,
	    (uintmax_t)offset, size, cksum);

#ifdef HAVE_DIAGNOSTIC
	/*
	 * In diagnostic mode, verify the block we're about to read isn't on
	 * either the available or discard lists.
	 *
	 * Don't check during salvage, it's possible we're reading an already
	 * freed overflow page.
	 */
	if (!F_ISSET(session, WT_SESSION_SALVAGE_QUIET_ERR))
		WT_RET(
		    __wt_block_misplaced(session, block, "read", offset, size));
#endif

	/*
	 * Grow the buffer as necessary and read the block.  Buffers should be
	 * aligned for reading, but there are lots of buffers (for example, file
	 * cursors have two buffers each, key and value), and it's difficult to
	 * be sure we've found all of them.  If the buffer isn't aligned, it's
	 * an easy fix: set the flag and guarantee we reallocate it.  (Most of
	 * the time on reads, the buffer memory has not yet been allocated, so
	 * we're not adding any additional processing time.)
	 */
	if (F_ISSET(buf, WT_ITEM_ALIGNED))
		alloc_size = size;
	else {
		F_SET(buf, WT_ITEM_ALIGNED);
		alloc_size = (uint32_t)WT_MAX(size, buf->memsize + 10);
	}
	WT_RET(__wt_buf_init(session, buf, alloc_size));
	WT_RET(__wt_read(session, block->fh, offset, size, buf->mem));
	buf->size = size;

	blk = WT_BLOCK_HEADER_REF(buf->mem);
	blk->cksum = 0;
	page_cksum = __wt_cksum(buf->mem,
	    F_ISSET(blk, WT_BLOCK_DATA_CKSUM) ? size : WT_BLOCK_COMPRESS_SKIP);
	if (cksum != page_cksum) {
		if (!F_ISSET(session, WT_SESSION_SALVAGE_QUIET_ERR))
			__wt_errx(session,
			    "read checksum error [%"
			    PRIu32 "B @ %" PRIuMAX ", %"
			    PRIu32 " != %" PRIu32 "]",
			    size, (uintmax_t)offset, cksum, page_cksum);
		return (WT_ERROR);
	}

	WT_CSTAT_INCR(session, block_read);
	WT_CSTAT_INCRV(session, block_byte_read, size);
	return (0);
}

/*
 * __wt_txn_recover --
 *	Run recovery.
 */
int
__wt_txn_recover(WT_SESSION_IMPL *session)
{
	WT_CONNECTION_IMPL *conn;
	WT_CURSOR *metac;
	WT_DECL_RET;
	WT_RECOVERY r;
	struct WT_RECOVERY_FILE *metafile;
	char *config;
	int needs_rec, was_backup;

	conn = S2C(session);
	WT_CLEAR(r);
	WT_INIT_LSN(&r.ckpt_lsn);
	was_backup = F_ISSET(conn, WT_CONN_WAS_BACKUP) ? 1 : 0;

	/* We need a real session for recovery. */
	WT_RET(__wt_open_session(conn, NULL, NULL, &session));
	F_SET(session, WT_SESSION_NO_LOGGING);
	r.session = session;

	WT_ERR(__wt_metadata_search(session, WT_METAFILE_URI, &config));
	WT_ERR(__recovery_setup_file(&r, WT_METAFILE_URI, config));
	WT_ERR(__wt_metadata_cursor(session, NULL, &metac));
	metafile = &r.files[WT_METAFILE_ID];
	metafile->c = metac;

	/*
	 * If no log was found (including if logging is disabled), or if the
	 * last checkpoint was done with logging disabled, recovery should not
	 * run.  Scan the metadata to figure out the largest file ID.
	 */
	if (!FLD_ISSET(S2C(session)->log_flags, WT_CONN_LOG_EXISTED) ||
	    WT_IS_MAX_LSN(&metafile->ckpt_lsn)) {
		WT_ERR(__recovery_file_scan(&r));
		conn->next_file_id = r.max_fileid;
		goto done;
	}

	/*
	 * First, do a pass through the log to recover the metadata, and
	 * establish the last checkpoint LSN.  Skip this when opening a hot
	 * backup: we already have the correct metadata in that case.
	 */
	if (!was_backup) {
		r.metadata_only = 1;
		if (WT_IS_INIT_LSN(&metafile->ckpt_lsn))
			WT_ERR(__wt_log_scan(session,
			    NULL, WT_LOGSCAN_FIRST, __txn_log_recover, &r));
		else {
			/*
			 * Start at the last checkpoint LSN referenced in the
			 * metadata.  If we see the end of a checkpoint while
			 * scanning, we will change the full scan to start from
			 * there.
			 */
			r.ckpt_lsn = metafile->ckpt_lsn;
			WT_ERR(__wt_log_scan(session,
			    &metafile->ckpt_lsn, 0, __txn_log_recover, &r));
		}
	}

	/* Scan the metadata to find the live files and their IDs. */
	WT_ERR(__recovery_file_scan(&r));

	/*
	 * We no longer need the metadata cursor: close it to avoid pinning any
	 * resources that could block eviction during recovery.
	 */
	r.files[0].c = NULL;
	WT_ERR(metac->close(metac));

	/*
	 * Now, recover all the files apart from the metadata.
	 * Pass WT_LOGSCAN_RECOVER so that old logs get truncated.
	 */
	r.metadata_only = 0;
	WT_ERR(__wt_verbose(session, WT_VERB_RECOVERY,
	    "Main recovery loop: starting at %u/%" PRIuMAX,
	    r.ckpt_lsn.file, (uintmax_t)r.ckpt_lsn.offset));
	WT_ERR(__wt_log_needs_recovery(session, &r.ckpt_lsn, &needs_rec));
	/*
	 * Check if the database was shut down cleanly.  If not
	 * return an error if the user does not want automatic
	 * recovery.
	 */
	if (needs_rec && FLD_ISSET(conn->log_flags, WT_CONN_LOG_RECOVER_ERR))
		WT_ERR(WT_RUN_RECOVERY);
	/*
	 * Always run recovery even if it was a clean shutdown.
	 * We can consider skipping it in the future.
	 */
	if (WT_IS_INIT_LSN(&r.ckpt_lsn))
		WT_ERR(__wt_log_scan(session, NULL,
		    WT_LOGSCAN_FIRST | WT_LOGSCAN_RECOVER,
		    __txn_log_recover, &r));
//.........这里部分代码省略.........

/*
 * __lsm_bloom_create --
 *	Create a bloom filter for a chunk of the LSM tree that has been
 *	checkpointed but not yet been merged.
 */
static int
__lsm_bloom_create(WT_SESSION_IMPL *session,
    WT_LSM_TREE *lsm_tree, WT_LSM_CHUNK *chunk, u_int chunk_off)
{
	WT_BLOOM *bloom;
	WT_CURSOR *src;
	WT_DECL_RET;
	WT_ITEM buf, key;
	WT_SESSION *wt_session;
	uint64_t insert_count;
	int exist;

	/*
	 * Normally, the Bloom URI is populated when the chunk struct is
	 * allocated.  After an open, however, it may not have been.
	 * Deal with that here.
	 */
	if (chunk->bloom_uri == NULL) {
		WT_CLEAR(buf);
		WT_RET(__wt_lsm_tree_bloom_name(
		    session, lsm_tree, chunk->id, &buf));
		chunk->bloom_uri = __wt_buf_steal(session, &buf, NULL);
	}

	/*
	 * Drop the bloom filter first - there may be some content hanging over
	 * from an aborted merge or checkpoint.
	 */
	wt_session = &session->iface;
	WT_RET(__wt_exist(session, chunk->bloom_uri + strlen("file:"), &exist));
	if (exist)
		WT_RET(wt_session->drop(wt_session, chunk->bloom_uri, "force"));

	bloom = NULL;
	/*
	 * This is merge-like activity, and we don't want compacts to give up
	 * because we are creating a bunch of bloom filters before merging.
	 */
	++lsm_tree->merge_progressing;
	WT_RET(__wt_bloom_create(session, chunk->bloom_uri,
	    lsm_tree->bloom_config, chunk->count,
	    lsm_tree->bloom_bit_count, lsm_tree->bloom_hash_count, &bloom));

	/* Open a special merge cursor just on this chunk. */
	WT_ERR(__wt_open_cursor(session, lsm_tree->name, NULL, NULL, &src));
	F_SET(src, WT_CURSTD_RAW);
	WT_ERR(__wt_clsm_init_merge(src, chunk_off, chunk->id, 1));

	F_SET(session, WT_SESSION_NO_CACHE);
	for (insert_count = 0; (ret = src->next(src)) == 0; insert_count++) {
		WT_ERR(src->get_key(src, &key));
		WT_ERR(__wt_bloom_insert(bloom, &key));
	}
	WT_ERR_NOTFOUND_OK(ret);
	WT_TRET(src->close(src));

	WT_TRET(__wt_bloom_finalize(bloom));
	WT_ERR(ret);

	F_CLR(session, WT_SESSION_NO_CACHE);

	/* Load the new Bloom filter into cache. */
	WT_CLEAR(key);
	WT_ERR_NOTFOUND_OK(__wt_bloom_get(bloom, &key));

	WT_VERBOSE_ERR(session, lsm,
	    "LSM worker created bloom filter %s. "
	    "Expected %" PRIu64 " items, got %" PRIu64,
	    chunk->bloom_uri, chunk->count, insert_count);

	/* Ensure the bloom filter is in the metadata. */
	WT_ERR(__wt_lsm_tree_lock(session, lsm_tree, 1));
	F_SET_ATOMIC(chunk, WT_LSM_CHUNK_BLOOM);
	ret = __wt_lsm_meta_write(session, lsm_tree);
	++lsm_tree->dsk_gen;
	WT_TRET(__wt_lsm_tree_unlock(session, lsm_tree));

	if (ret != 0)
		WT_ERR_MSG(session, ret, "LSM bloom worker metadata write");

err:	if (bloom != NULL)
		WT_TRET(__wt_bloom_close(bloom));
	F_CLR(session, WT_SESSION_NO_CACHE);
	return (ret);
}

/*
 * __wt_curds_open --
 *	Initialize a data-source cursor.
 */
int
__wt_curds_open(
    WT_SESSION_IMPL *session, const char *uri, WT_CURSOR *owner,
    const char *cfg[], WT_DATA_SOURCE *dsrc, WT_CURSOR **cursorp)
{
	WT_CURSOR_STATIC_INIT(iface,
	    NULL,			/* get-key */
	    NULL,			/* get-value */
	    NULL,			/* set-key */
	    NULL,			/* set-value */
	    __curds_compare,		/* compare */
	    __curds_next,		/* next */
	    __curds_prev,		/* prev */
	    __curds_reset,		/* reset */
	    __curds_search,		/* search */
	    __curds_search_near,	/* search-near */
	    __curds_insert,		/* insert */
	    __curds_update,		/* update */
	    __curds_remove,		/* remove */
	    __curds_close);		/* close */
	WT_CONFIG_ITEM cval;
	WT_CURSOR *cursor, *source;
	WT_CURSOR_DATA_SOURCE *data_source;
	WT_DECL_RET;
	const char *metaconf;

	STATIC_ASSERT(offsetof(WT_CURSOR_DATA_SOURCE, iface) == 0);

	data_source = NULL;
	metaconf = NULL;

	WT_RET(__wt_calloc_def(session, 1, &data_source));
	cursor = &data_source->iface;
	*cursor = iface;
	cursor->session = &session->iface;
	F_SET(cursor, WT_CURSTD_DATA_SOURCE);

	/*
	 * XXX
	 * The underlying data-source may require the object's key and value
	 * formats.  This isn't a particularly elegant way of getting that
	 * information to the data-source, this feels like a layering problem
	 * to me.
	 */
	WT_ERR(__wt_metadata_search(session, uri, &metaconf));
	WT_ERR(__wt_config_getones(session, metaconf, "key_format", &cval));
	WT_ERR(__wt_strndup(session, cval.str, cval.len, &cursor->key_format));
	WT_ERR(__wt_config_getones(session, metaconf, "value_format", &cval));
	WT_ERR(
	    __wt_strndup(session, cval.str, cval.len, &cursor->value_format));

	WT_ERR(__wt_cursor_init(cursor, uri, owner, cfg, cursorp));

	/* Data-source cursors have a collator reference. */
	WT_ERR(__wt_collator_config(session, cfg, &data_source->collator));

	WT_ERR(dsrc->open_cursor(dsrc,
	    &session->iface, uri, (WT_CONFIG_ARG *)cfg, &data_source->source));
	source = data_source->source;
	source->session = (WT_SESSION *)session;
	memset(&source->q, 0, sizeof(source->q));
	source->recno = 0;
	memset(source->raw_recno_buf, 0, sizeof(source->raw_recno_buf));
	memset(&source->key, 0, sizeof(source->key));
	memset(&source->value, 0, sizeof(source->value));
	source->saved_err = 0;
	source->flags = 0;

	if (0) {
err:		if (F_ISSET(cursor, WT_CURSTD_OPEN))
			WT_TRET(cursor->close(cursor));
		else
			__wt_free(session, data_source);
		*cursorp = NULL;
	}

	__wt_free(session, metaconf);
	return (ret);
}

//.........这里部分代码省略.........
	uint64_t *switch_txnp;
	uint64_t snap_min;

	lsm_tree = clsm->lsm_tree;
	session = (WT_SESSION_IMPL *)clsm->iface.session;
	txn = &session->txn;

	/* Merge cursors never update. */
	if (F_ISSET(clsm, WT_CLSM_MERGE))
		return (0);

	if (reset) {
		WT_ASSERT(session, !F_ISSET(&clsm->iface,
		   WT_CURSTD_KEY_INT | WT_CURSTD_VALUE_INT));
		WT_RET(__clsm_reset_cursors(clsm, NULL));
	}

	for (;;) {
		/*
		 * If the cursor looks up-to-date, check if the cache is full.
		 * In case this call blocks, the check will be repeated before
		 * proceeding.
		 */
		if (clsm->dsk_gen != lsm_tree->dsk_gen &&
		    lsm_tree->nchunks != 0)
			goto open;

		if (clsm->dsk_gen != lsm_tree->dsk_gen &&
		    lsm_tree->nchunks != 0)
			goto open;

		/* Update the maximum transaction ID in the primary chunk. */
		if (update) {
			/*
			 * Ensure that there is a transaction snapshot active.
			 */
			WT_RET(__wt_txn_autocommit_check(session));
			WT_RET(__wt_txn_id_check(session));

			WT_RET(__clsm_enter_update(clsm));
			if (clsm->dsk_gen != clsm->lsm_tree->dsk_gen)
				goto open;

			if (txn->isolation == WT_ISO_SNAPSHOT)
				__wt_txn_cursor_op(session);

			/*
			 * Figure out how many updates are required for
			 * snapshot isolation.
			 *
			 * This is not a normal visibility check on the maximum
			 * transaction ID in each chunk: any transaction ID
			 * that overlaps with our snapshot is a potential
			 * conflict.
			 */
			clsm->nupdates = 1;
			if (txn->isolation == WT_ISO_SNAPSHOT &&
			    F_ISSET(clsm, WT_CLSM_OPEN_SNAPSHOT)) {
				WT_ASSERT(session,
				    F_ISSET(txn, WT_TXN_HAS_SNAPSHOT));
				snap_min = txn->snap_min;
				for (switch_txnp =
				    &clsm->switch_txn[clsm->nchunks - 2];
				    clsm->nupdates < clsm->nchunks;
				    clsm->nupdates++, switch_txnp--) {
					if (WT_TXNID_LT(*switch_txnp, snap_min))
						break;
					WT_ASSERT(session,
					    !__wt_txn_visible_all(
					    session, *switch_txnp));
				}
			}
		}

		/*
		 * Stop when we are up-to-date, as long as this is:
		 *   - a snapshot isolation update and the cursor is set up for
		 *     that;
		 *   - an update operation with a primary chunk, or
		 *   - a read operation and the cursor is open for reading.
		 */
		if ((!update ||
		    txn->isolation != WT_ISO_SNAPSHOT ||
		    F_ISSET(clsm, WT_CLSM_OPEN_SNAPSHOT)) &&
		    ((update && clsm->primary_chunk != NULL) ||
		    (!update && F_ISSET(clsm, WT_CLSM_OPEN_READ))))
			break;

open:		WT_WITH_SCHEMA_LOCK(session,
		    ret = __clsm_open_cursors(clsm, update, 0, 0));
		WT_RET(ret);
	}

	if (!F_ISSET(clsm, WT_CLSM_ACTIVE)) {
		WT_RET(__cursor_enter(session));
		F_SET(clsm, WT_CLSM_ACTIVE);
	}

	return (0);
}

DB *
__rec_open(const char *fname, int flags, mode_t mode, const RECNOINFO *openinfo,
    int dflags)
{
	BTREE *t;
	BTREEINFO btopeninfo;
	DB *dbp;
	PAGE *h;
	struct stat sb;
	int rfd = -1;	/* pacify gcc */
	int sverrno;

	dbp = NULL;
	/* Open the user's file -- if this fails, we're done. */
	if (fname != NULL) {
		if ((rfd = open(fname, flags | O_CLOEXEC, mode)) == -1)
			return NULL;
	}

	/* Create a btree in memory (backed by disk). */
	if (openinfo) {
		if (openinfo->flags & ~(R_FIXEDLEN | R_NOKEY | R_SNAPSHOT))
			goto einval;
		btopeninfo.flags = 0;
		btopeninfo.cachesize = openinfo->cachesize;
		btopeninfo.maxkeypage = 0;
		btopeninfo.minkeypage = 0;
		btopeninfo.psize = openinfo->psize;
		btopeninfo.compare = NULL;
		btopeninfo.prefix = NULL;
		btopeninfo.lorder = openinfo->lorder;
		dbp = __bt_open(openinfo->bfname,
		    O_RDWR, S_IRUSR | S_IWUSR, &btopeninfo, dflags);
	} else
		dbp = __bt_open(NULL, O_RDWR, S_IRUSR | S_IWUSR, NULL, dflags);
	if (dbp == NULL)
		goto err;

	/*
	 * Some fields in the tree structure are recno specific.  Fill them
	 * in and make the btree structure look like a recno structure.  We
	 * don't change the bt_ovflsize value, it's close enough and slightly
	 * bigger.
	 */
	t = dbp->internal;
	if (openinfo) {
		if (openinfo->flags & R_FIXEDLEN) {
			F_SET(t, R_FIXLEN);
			t->bt_reclen = openinfo->reclen;
			if (t->bt_reclen == 0)
				goto einval;
		}
		t->bt_bval = openinfo->bval;
	} else
		t->bt_bval = '\n';

	F_SET(t, R_RECNO);
	if (fname == NULL)
		F_SET(t, R_EOF | R_INMEM);
	else
		t->bt_rfd = rfd;

	if (fname != NULL) {
		/*
		 * In 4.4BSD, stat(2) returns true for ISSOCK on pipes.
		 * Unfortunately, that's not portable, so we use lseek
		 * and check the errno values.
		 */
		errno = 0;
		if (lseek(rfd, (off_t)0, SEEK_CUR) == -1 && errno == ESPIPE) {
			switch (flags & O_ACCMODE) {
			case O_RDONLY:
				F_SET(t, R_RDONLY);
				break;
			default:
				goto einval;
			}
slow:			if ((t->bt_rfp = fdopen(rfd, "r")) == NULL)
				goto err;
			F_SET(t, R_CLOSEFP);
			t->bt_irec =
			    F_ISSET(t, R_FIXLEN) ? __rec_fpipe : __rec_vpipe;
		} else {
			switch (flags & O_ACCMODE) {
			case O_RDONLY:
				F_SET(t, R_RDONLY);
				break;
			case O_RDWR:
				break;
			default:
				goto einval;
			}

			if (fstat(rfd, &sb))
				goto err;
			/*
			 * Kluge -- we'd like to test to see if the file is too
			 * big to mmap.  Since, we don't know what size or type
			 * off_t's or size_t's are, what the largest unsigned
			 * integral type is, or what random insanity the local
//.........这里部分代码省略.........

//.........这里部分代码省略.........
		if (F_ISSET(clp, CL_STDIN_TTY)) {
			(void)tcgetattr(STDIN_FILENO, &t);
			(void)tcsetattr(STDIN_FILENO,
			    TCSASOFT | TCSADRAIN, &clp->orig);
		}

		/* Stop the process group. */
		(void)kill(0, SIGTSTP);

		/* Time passes ... */

		/* Restore terminal settings. */
		if (F_ISSET(clp, CL_STDIN_TTY))
			(void)tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &t);
		return (0);
	}

	/*
	 * Move to the lower left-hand corner of the screen.
	 *
	 * XXX
	 * Not sure this is necessary in System V implementations, but it
	 * shouldn't hurt.
	 */
	getyx(win, y, x);
	(void)wmove(win, LINES - 1, 0);
	(void)wrefresh(win);

	/*
	 * Temporarily end the screen.  System V introduced a semantic where
	 * endwin() could be restarted.  We use it because restarting curses
	 * from scratch often fails in System V.  4BSD curses didn't support
	 * restarting after endwin(), so we have to do what clean up we can
	 * without calling it.
	 */
	/* Save the terminal settings. */
	(void)tcgetattr(STDIN_FILENO, &t);

	/* Restore the cursor keys to normal mode. */
	(void)keypad(stdscr, FALSE);

	/* Restore the window name. */
	(void)cl_rename(sp, NULL, 0);

#ifdef HAVE_BSD_CURSES
	(void)cl_attr(sp, SA_ALTERNATE, 0);
#else
	(void)endwin();
#endif
	/*
	 * XXX
	 * Restore the original terminal settings.  This is bad -- the
	 * reset can cause character loss from the tty queue.  However,
	 * we can't call endwin() in BSD curses implementations, and too
	 * many System V curses implementations don't get it right.
	 */
	(void)tcsetattr(STDIN_FILENO, TCSADRAIN | TCSASOFT, &clp->orig);

	/* Stop the process group. */
	(void)kill(0, SIGTSTP);

	/* Time passes ... */

	/*
	 * If we received a killer signal, we're done.  Leave everything
	 * unchanged.  In addition, the terminal has already been reset
	 * correctly, so leave it alone.
	 */
	if (clp->killersig) {
		F_CLR(clp, CL_SCR_EX_INIT | CL_SCR_VI_INIT);
		return (0);
	}

	/* Restore terminal settings. */
	wrefresh(win);			    /* Needed on SunOs/Solaris ? */
	if (F_ISSET(clp, CL_STDIN_TTY))
		(void)tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &t);

#ifdef HAVE_BSD_CURSES
	(void)cl_attr(sp, SA_ALTERNATE, 1);
#endif

	/* Set the window name. */
	(void)cl_rename(sp, sp->frp->name, 1);

	/* Put the cursor keys into application mode. */
	(void)keypad(stdscr, TRUE);

	/* Refresh and repaint the screen. */
	(void)wmove(win, y, x);
	(void)cl_refresh(sp, 1);

	/* If the screen changed size, set the SIGWINCH bit. */
	if (cl_ssize(sp, 1, NULL, NULL, &changed))
		return (1);
	if (changed)
		F_SET(CLP(sp), CL_SIGWINCH);

	return (0);
}

/*
 * __clsm_open_cursors --
 *	Open cursors for the current set of files.
 */
static int
__clsm_open_cursors(
    WT_CURSOR_LSM *clsm, bool update, u_int start_chunk, uint32_t start_id)
{
	WT_BTREE *btree;
	WT_CURSOR *c, **cp, *primary;
	WT_DECL_RET;
	WT_LSM_CHUNK *chunk;
	WT_LSM_TREE *lsm_tree;
	WT_SESSION_IMPL *session;
	WT_TXN *txn;
	const char *checkpoint, *ckpt_cfg[3];
	uint64_t saved_gen;
	u_int i, nchunks, ngood, nupdates;
	u_int close_range_end, close_range_start;
	bool locked;

	c = &clsm->iface;
	session = (WT_SESSION_IMPL *)c->session;
	txn = &session->txn;
	chunk = NULL;
	locked = false;
	lsm_tree = clsm->lsm_tree;

	/*
	 * Ensure that any snapshot update has cursors on the right set of
	 * chunks to guarantee visibility is correct.
	 */
	if (update && txn->isolation == WT_ISO_SNAPSHOT)
		F_SET(clsm, WT_CLSM_OPEN_SNAPSHOT);

	/*
	 * Query operations need a full set of cursors. Overwrite cursors
	 * do queries in service of updates.
	 */
	if (!update || !F_ISSET(c, WT_CURSTD_OVERWRITE))
		F_SET(clsm, WT_CLSM_OPEN_READ);

	if (lsm_tree->nchunks == 0)
		return (0);

	ckpt_cfg[0] = WT_CONFIG_BASE(session, WT_SESSION_open_cursor);
	ckpt_cfg[1] = "checkpoint=" WT_CHECKPOINT ",raw";
	ckpt_cfg[2] = NULL;

	/*
	 * If the key is pointing to memory that is pinned by a chunk
	 * cursor, take a copy before closing cursors.
	 */
	if (F_ISSET(c, WT_CURSTD_KEY_INT))
		WT_CURSOR_NEEDKEY(c);

	F_CLR(clsm, WT_CLSM_ITERATE_NEXT | WT_CLSM_ITERATE_PREV);

	WT_RET(__wt_lsm_tree_readlock(session, lsm_tree));
	locked = true;

	/* Merge cursors have already figured out how many chunks they need. */
retry:	if (F_ISSET(clsm, WT_CLSM_MERGE)) {
		nchunks = clsm->nchunks;
		ngood = 0;

		/*
		 * We may have raced with another merge completing.  Check that
		 * we're starting at the right offset in the chunk array.
		 */
		if (start_chunk >= lsm_tree->nchunks ||
		    lsm_tree->chunk[start_chunk]->id != start_id) {
			for (start_chunk = 0;
			    start_chunk < lsm_tree->nchunks;
			    start_chunk++) {
				chunk = lsm_tree->chunk[start_chunk];
				if (chunk->id == start_id)
					break;
			}
			/* We have to find the start chunk: merge locked it. */
			WT_ASSERT(session, start_chunk < lsm_tree->nchunks);
		}

		WT_ASSERT(session, start_chunk + nchunks <= lsm_tree->nchunks);
	} else {
		nchunks = lsm_tree->nchunks;

		/*
		 * If we are only opening the cursor for updates, only open the
		 * primary chunk, plus any other chunks that might be required
		 * to detect snapshot isolation conflicts.
		 */
		if (F_ISSET(clsm, WT_CLSM_OPEN_SNAPSHOT))
			WT_ERR(__wt_realloc_def(session,
			    &clsm->txnid_alloc, nchunks,
			    &clsm->switch_txn));
		if (F_ISSET(clsm, WT_CLSM_OPEN_READ))
			ngood = nupdates = 0;
		else if (F_ISSET(clsm, WT_CLSM_OPEN_SNAPSHOT)) {
			/*
//.........这里部分代码省略.........

/*
 * __wt_evict_file --
 *	Discard pages for a specific file.
 */
int
__wt_evict_file(WT_SESSION_IMPL *session, int syncop)
{
	WT_DECL_RET;
	WT_PAGE *page;
	WT_REF *next_ref, *ref;
	int evict_reset;

	/*
	 * We need exclusive access to the file -- disable ordinary eviction
	 * and drain any blocks already queued.
	 */
	WT_RET(__wt_evict_file_exclusive_on(session, &evict_reset));

	/* Make sure the oldest transaction ID is up-to-date. */
	__wt_txn_update_oldest(session, 1);

	/* Walk the tree, discarding pages. */
	next_ref = NULL;
	WT_ERR(__wt_tree_walk(session, &next_ref, NULL,
	    WT_READ_CACHE | WT_READ_NO_EVICT));
	while ((ref = next_ref) != NULL) {
		page = ref->page;

		/*
		 * Eviction can fail when a page in the evicted page's subtree
		 * switches state.  For example, if we don't evict a page marked
		 * empty, because we expect it to be merged into its parent, it
		 * might no longer be empty after it's reconciled, in which case
		 * eviction of its parent would fail.  We can either walk the
		 * tree multiple times (until it's finally empty), or reconcile
		 * each page to get it to its final state before considering if
		 * it's an eviction target or will be merged into its parent.
		 *
		 * Don't limit this test to any particular page type, that tends
		 * to introduce bugs when the reconciliation of other page types
		 * changes, and there's no advantage to doing so.
		 *
		 * Eviction can also fail because an update cannot be written.
		 * If sessions have disjoint sets of files open, updates in a
		 * no-longer-referenced file may not yet be globally visible,
		 * and the write will fail with EBUSY.  Our caller handles that
		 * error, retrying later.
		 */
		if (syncop == WT_SYNC_CLOSE && __wt_page_is_modified(page))
			WT_ERR(__wt_reconcile(session, ref, NULL, WT_EVICTING));

		/*
		 * We can't evict the page just returned to us (it marks our
		 * place in the tree), so move the walk to one page ahead of
		 * the page being evicted.  Note, we reconciled the returned
		 * page first: if reconciliation of that page were to change
		 * the shape of the tree, and we did the next walk call before
		 * the reconciliation, the next walk call could miss a page in
		 * the tree.
		 */
		WT_ERR(__wt_tree_walk(session, &next_ref, NULL,
		    WT_READ_CACHE | WT_READ_NO_EVICT));

		switch (syncop) {
		case WT_SYNC_CLOSE:
			/*
			 * Evict the page.
			 */
			WT_ERR(__wt_evict(session, ref, WT_EVICT_EXCLUSIVE));
			break;
		case WT_SYNC_DISCARD:
			WT_ASSERT(session,
			    __wt_page_can_evict(session, page, 0, NULL));
			__wt_evict_page_clean_update(session, ref);
			break;
		case WT_SYNC_DISCARD_FORCE:
			/*
			 * Forced discard of the page, whether clean or dirty.
			 * If we see a dirty page in a forced discard, clean
			 * the page, both to keep statistics correct, and to
			 * let the page-discard function assert no dirty page
			 * is ever discarded.
			 */
			if (__wt_page_is_modified(page)) {
				page->modify->write_gen = 0;
				__wt_cache_dirty_decr(session, page);
			}

			F_SET(session, WT_SESSION_DISCARD_FORCE);
			__wt_evict_page_clean_update(session, ref);
			F_CLR(session, WT_SESSION_DISCARD_FORCE);
			break;
		WT_ILLEGAL_VALUE_ERR(session);
		}
	}

	if (0) {
err:		/* On error, clear any left-over tree walk. */
		if (next_ref != NULL)
			WT_TRET(__wt_page_release(
//.........这里部分代码省略.........

/*
 * __wt_btcur_prev --
 *	Move to the previous record in the tree.
 */
int
__wt_btcur_prev(WT_CURSOR_BTREE *cbt, int truncating)
{
	WT_DECL_RET;
	WT_PAGE *page;
	WT_SESSION_IMPL *session;
	uint32_t flags;
	int skipped, newpage;

	session = (WT_SESSION_IMPL *)cbt->iface.session;

	WT_STAT_FAST_CONN_INCR(session, cursor_prev);
	WT_STAT_FAST_DATA_INCR(session, cursor_prev);

	flags = WT_READ_PREV | WT_READ_SKIP_INTL;	/* Tree walk flags. */
	if (truncating)
		LF_SET(WT_READ_TRUNCATE);

	WT_RET(__cursor_func_init(cbt, 0));

	/*
	 * If we aren't already iterating in the right direction, there's
	 * some setup to do.
	 */
	if (!F_ISSET(cbt, WT_CBT_ITERATE_PREV))
		__wt_btcur_iterate_setup(cbt, 0);

	/*
	 * Walk any page we're holding until the underlying call returns not-
	 * found.  Then, move to the previous page, until we reach the start
	 * of the file.
	 */
	for (skipped = newpage = 0;; skipped = 0, newpage = 1) {
		page = cbt->ref == NULL ? NULL : cbt->ref->page;
		WT_ASSERT(session, page == NULL || !WT_PAGE_IS_INTERNAL(page));

		/*
		 * The last page in a column-store has appended entries.
		 * We handle it separately from the usual cursor code:
		 * it's only that one page and it's in a simple format.
		 */
		if (newpage && page != NULL && page->type != WT_PAGE_ROW_LEAF &&
		    (cbt->ins_head = WT_COL_APPEND(page)) != NULL)
			F_SET(cbt, WT_CBT_ITERATE_APPEND);

		if (F_ISSET(cbt, WT_CBT_ITERATE_APPEND)) {
			switch (page->type) {
			case WT_PAGE_COL_FIX:
				ret = __cursor_fix_append_prev(cbt, newpage);
				break;
			case WT_PAGE_COL_VAR:
				ret = __cursor_var_append_prev(
				    cbt, newpage, &skipped);
				break;
			WT_ILLEGAL_VALUE_ERR(session);
			}
			if (ret == 0)
				break;
			F_CLR(cbt, WT_CBT_ITERATE_APPEND);
			if (ret != WT_NOTFOUND)
				break;
			newpage = 1;
		}
		if (page != NULL) {
			switch (page->type) {
			case WT_PAGE_COL_FIX:
				ret = __cursor_fix_prev(cbt, newpage);
				break;
			case WT_PAGE_COL_VAR:
				ret = __cursor_var_prev(cbt, newpage, &skipped);
				break;
			case WT_PAGE_ROW_LEAF:
				ret = __cursor_row_prev(cbt, newpage, &skipped);
				break;
			WT_ILLEGAL_VALUE_ERR(session);
			}
			if (ret != WT_NOTFOUND)
				break;
		}

		if (newpage && skipped)
			page->read_gen = WT_READGEN_OLDEST;

		WT_ERR(__wt_tree_walk(session, &cbt->ref, flags));
		WT_ERR_TEST(cbt->ref == NULL, WT_NOTFOUND);
	}

err:	if (ret != 0)
		WT_TRET(__cursor_reset(cbt));
	return (ret);
}

//.........这里部分代码省略.........
				    db_append(sp, 1, lno++, NULL, 0))
					return (1);
			}
		}
		/*
		 * If there's any remaining text, we're in a global, and
		 * there's more command to parse.
		 *
		 * !!!
		 * We depend on the fact that non-global commands will eat the
		 * rest of the command line as text input, and before getting
		 * any text input from the user.  Otherwise, we'd have to save
		 * off the command text before or during the call to the text
		 * input function below.
		 */
		if (len != 0)
			cmdp->save_cmd = t;
		cmdp->save_cmdlen = len;
	}

	if (F_ISSET(sp, SC_EX_GLOBAL)) {
		if ((sp->lno = lno) == 0 && db_exist(sp, 1))
			sp->lno = 1;
		return (0);
	}

	/*
	 * If not in a global command, read from the terminal.
	 *
	 * If this code is called by vi, we want to reset the terminal and use
	 * ex's line get routine.  It actually works fine if we use vi's get
	 * routine, but it doesn't look as nice.  Maybe if we had a separate
	 * window or something, but getting a line at a time looks awkward.
	 * However, depending on the screen that we're using, that may not
	 * be possible.
	 */
	if (F_ISSET(sp, SC_VI)) {
		if (gp->scr_screen(sp, SC_EX)) {
			ex_wemsg(sp, cmdp->cmd->name, EXM_NOCANON);
			return (1);
		}

		/* If we're still in the vi screen, move out explicitly. */
		need_newline = !F_ISSET(sp, SC_SCR_EXWROTE);
		F_SET(sp, SC_SCR_EX | SC_SCR_EXWROTE);
		if (need_newline)
			(void)ex_puts(sp, "\n");

		/*
		 * !!!
		 * Users of historical versions of vi sometimes get confused
		 * when they enter append mode, and can't seem to get out of
		 * it.  Give them an informational message.
		 */
		(void)ex_puts(sp,
		    msg_cat(sp, "273|Entering ex input mode.", NULL));
		(void)ex_puts(sp, "\n");
		(void)ex_fflush(sp);
	}

	/*
	 * Set input flags; the ! flag turns off autoindent for append,
	 * change and insert.
	 */
	LF_INIT(TXT_DOTTERM | TXT_NUMBER);
	if (!FL_ISSET(cmdp->iflags, E_C_FORCE) && O_ISSET(sp, O_AUTOINDENT))
		LF_SET(TXT_AUTOINDENT);
	if (O_ISSET(sp, O_BEAUTIFY))
		LF_SET(TXT_BEAUTIFY);

	/*
	 * This code can't use the common screen TEXTH structure (sp->tiq),
	 * as it may already be in use, e.g. ":append|s/abc/ABC/" would fail
	 * as we are only halfway through the text when the append code fires.
	 * Use a local structure instead.  (The ex code would have to use a
	 * local structure except that we're guaranteed to finish remaining
	 * characters in the common TEXTH structure when they were inserted
	 * into the file, above.)
	 */
	TAILQ_INIT(tiq);

	if (ex_txt(sp, tiq, 0, flags))
		return (1);

	TAILQ_FOREACH(tp, tiq, q) {
		if (db_append(sp, 1, lno++, tp->lb, tp->len))
			return (1);
		++cnt;
	}

	/*
	 * Set sp->lno to the final line number value (correcting for a
	 * possible 0 value) as that's historically correct for the final
	 * line value, whether or not the user entered any text.
	 */
	if ((sp->lno = lno) == 0 && db_exist(sp, 1))
		sp->lno = 1;

	return (0);
}

/*
 * __wt_bm_read --
 *	Map or read address cookie referenced block into a buffer.
 */
int
__wt_bm_read(WT_BM *bm, WT_SESSION_IMPL *session,
    WT_ITEM *buf, const uint8_t *addr, uint32_t addr_size)
{
	WT_BLOCK *block;
	off_t offset;
	uint32_t size, cksum;
	int mapped;

	WT_UNUSED(addr_size);
	block = bm->block;

	/* Crack the cookie. */
	WT_RET(__wt_block_buffer_to_addr(block, addr, &offset, &size, &cksum));

	/*
	 * Clear buffers previously used for mapped memory, we may be forced
	 * to read into this buffer.
	 */
	if (F_ISSET(buf, WT_ITEM_MAPPED))
		__wt_buf_free(session, buf);

	/*
	 * If we're going to be able to return mapped memory and the buffer
	 * has allocated memory, discard it.
	 */
	mapped = bm->map != NULL && offset + size <= (off_t)bm->maplen;
	if (buf->mem != NULL && mapped)
		__wt_buf_free(session, buf);

	/* Map the block if it's possible. */
	if (mapped) {
		buf->mem = (uint8_t *)bm->map + offset;
		buf->memsize = size;
		buf->data = buf->mem;
		buf->size = size;
		F_SET(buf, WT_ITEM_MAPPED);

		WT_RET(__wt_mmap_preload(session, buf->mem, buf->size));

		WT_CSTAT_INCR(session, block_map_read);
		WT_CSTAT_INCRV(session, block_byte_map_read, size);
		return (0);
	}

	/* Read the block. */
	WT_RET(__wt_block_read_off(session, block, buf, offset, size, cksum));

#ifdef HAVE_POSIX_FADVISE
	/* Optionally discard blocks from the system's buffer cache. */
	if (block->os_cache_max != 0 &&
	    (block->os_cache += size) > block->os_cache_max) {
		WT_DECL_RET;

		block->os_cache = 0;
		if ((ret = posix_fadvise(block->fh->fd,
		    (off_t)0, (off_t)0, POSIX_FADV_DONTNEED)) != 0)
			WT_RET_MSG(
			    session, ret, "%s: posix_fadvise", block->name);
	}
#endif
	return (0);
}