本文整理汇总了C++中ExecuteCmd函数的典型用法代码示例。如果您正苦于以下问题：C++ ExecuteCmd函数的具体用法？C++ ExecuteCmd怎么用？C++ ExecuteCmd使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ExecuteCmd函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: sdfuse_uboot
/***********************************************************************
*@函数名称: sdfuse_uboot
*@功能描述: sdfuse烧写u-boot映像文件
*@参数: 无
*@返回: 无
*@备注： 本u-boot未使用，real210.h中有CONFIG_FASTBOOT_SDFUSE这个定义
**********************************************************************/
void sdfuse_uboot()
{
char *buf;
ulong checksum = 0;
int i = 0;
if(!ExecuteCmd("fatload mmc 1:1 30f00000 /sdfuse/u-boot.bin"))
{
buf = 0x30f00000 + 16;/*把u-boot首地址偏移16字节的内存地址赋值给buf，此时u-boot的首地址是30f00000*/
for(i = 16; i < 8192; i++) /*循环进行u-boot的前8K代码校验和计算,i赋值为16是因为u-boot的前16字节可不必要校验和校验*/
{
checksum += *buf;
buf++;
}
*((volatile u32 *)(0x30f00000 + 0x8)) = checksum;/*把计算出的校验和写入3ff00008地址处等待写入EMMC*/
printf("\nBL1 checksum is:%08x\n\n", checksum);
/*printf("erase start block 1 (count 1073 blocks)...");
ExecuteCmd("mmc erase 1 431");*/
printf("writing BL1 start block 1 (count 16 blocks)...");
ExecuteCmd("mmc write 30f00000 1 10");/*烧写BL1到eMMC的第一个block，长度为16 block（注意此时是10，但是为16进制）*/
printf("\n");
printf("writing u-boot.bin start block 49 (count 1024 blocks)...");
ExecuteCmd("mmc write 30f00000 31 400");/*烧写u-boot到eMMC的第49个block，长度为1024 block（注意此时是400，但是为16进制）*/
}
}示例2: CMD_Keypress
//EQLIB_API VOID DoMappable(PSPAWNINFO pChar, PCHAR szLine)
int CMD_Keypress(int argc, char *argv[])
{
if (argc<2)
{
WriteChatf("Syntax: %s <eqcommand|keycombo> [hold|chat]",argv[0]);
return 0;
}
bool bHold=false;
bool bChat=false;
if (argc==3)
{
if (!stricmp(argv[2],"hold"))
{
bHold=true;
}
else if (!stricmp(argv[2],"chat"))
{
bChat=true;
}
}
if (!PressMQ2KeyBind(argv[1],bHold))
{
int N=FindMappableCommand(argv[1]);
if (N>=0)
{
ExecuteCmd(N,1,0);
if (!bHold)
ExecuteCmd(N,0,0);
return 0;
}
KeyCombo Temp;
if (ParseKeyCombo(argv[1],Temp))
{
if (bChat)
{
pWndMgr->HandleKeyboardMsg(Temp.Data[3],1);
pWndMgr->HandleKeyboardMsg(Temp.Data[3],0);
}
else
{
MQ2HandleKeyDown(Temp);
if (!bHold)
MQ2HandleKeyUp(Temp);
}
return 0;
}
WriteChatf("Invalid mappable command or key combo '%s'",argv[1]);
return -1;
}
return 0;
}示例3: ExecuteCmd
bool DbgGdb::DoInitializeGdb(const std::vector<BreakpointInfo> &bpList, const wxArrayString &cmds)
{
//place breakpoint at first line
#ifdef __WXMSW__
ExecuteCmd(wxT("set new-console on"));
#endif
ExecuteCmd(wxT("set unwindonsignal on"));
if (m_info.enablePendingBreakpoints) {
ExecuteCmd(wxT("set breakpoint pending on"));
}
if (m_info.catchThrow) {
ExecuteCmd(wxT("catch throw"));
}
#ifdef __WXMSW__
if (m_info.debugAsserts) {
ExecuteCmd(wxT("break assert"));
}
#endif
ExecuteCmd(wxT("set width 0"));
ExecuteCmd(wxT("set height 0"));
ExecuteCmd(wxT("set print pretty on")); // pretty printing
// Number of elements to show for arrays (including strings)
wxString sizeCommand;
sizeCommand << wxT("set print elements ") << m_info.maxDisplayStringSize;
ExecuteCmd( sizeCommand );
// set the project startup commands
for (size_t i=0; i<cmds.GetCount(); i++) {
ExecuteCmd(cmds.Item(i));
}
// keep the list of breakpoints
m_bpList = bpList;
if(GetIsRemoteDebugging() == false)
// When remote debugging, apply the breakpoints after we connect the
// gdbserver
SetBreakpoints();
if (m_info.breakAtWinMain) {
//try also to set breakpoint at WinMain
WriteCommand(wxT("-break-insert main"), NULL);
}
return true;
}示例4: emmc_format
/***********************************************************************
*@函数名称: emmc_format
*@功能描述: 格式化emmc
*@参数: 无
*@返回: 无
*@备注： 本u-boot未使用该函数
**********************************************************************/
void emmc_format(void)
{
unsigned char select;
printf("\n\nEnter 'y' to ensure erase emmc\n\n\n");
select = getc();
if((select == 'y') || (select == 'Y')) {
ExecuteCmd("ext2format mmc 0:1");
ExecuteCmd("ext2format mmc 0:2");
ExecuteCmd("ext2format mmc 0:3");
printf("\n\nformat complete !!!\n\n");
}
else {
printf("\nformat abort !!!\n\n");
}
}示例5: OnSetConsoleKeyShortcuts
// Undocumented function
BOOL WINAPI OnSetConsoleKeyShortcuts(BOOL bSet, BYTE bReserveKeys, LPVOID p1, DWORD n1)
{
//typedef BOOL (WINAPI* OnSetConsoleKeyShortcuts_t)(BOOL,BYTE,LPVOID,DWORD);
ORIGINALFASTEX(SetConsoleKeyShortcuts,NULL);
BOOL lbRc = FALSE;
if (F(SetConsoleKeyShortcuts))
lbRc = F(SetConsoleKeyShortcuts)(bSet, bReserveKeys, p1, n1);
if (ghConEmuWnd && IsWindow(ghConEmuWnd))
{
DWORD nLastErr = GetLastError();
DWORD nSize = sizeof(CESERVER_REQ_HDR)+sizeof(BYTE)*2;
CESERVER_REQ *pIn = ExecuteNewCmd(CECMD_KEYSHORTCUTS, nSize);
if (pIn)
{
pIn->Data[0] = bSet;
pIn->Data[1] = bReserveKeys;
wchar_t szGuiPipeName[128];
msprintf(szGuiPipeName, countof(szGuiPipeName), CEGUIPIPENAME, L".", LODWORD(ghConWnd));
CESERVER_REQ* pOut = ExecuteCmd(szGuiPipeName, pIn, 1000, NULL);
if (pOut)
ExecuteFreeResult(pOut);
ExecuteFreeResult(pIn);
}
SetLastError(nLastErr);
}
return lbRc;
}示例6: CorrectGuiChildRect
void CorrectGuiChildRect(DWORD anStyle, DWORD anStyleEx, RECT& rcGui)
{
RECT rcShift = {};
if ((anStyle != gGuiClientStyles.nStyle) || (anStyleEx != gGuiClientStyles.nStyleEx))
{
DWORD nSize = sizeof(CESERVER_REQ_HDR)+sizeof(GuiStylesAndShifts);
CESERVER_REQ *pIn = ExecuteNewCmd(CECMD_GUICLIENTSHIFT, nSize);
if (pIn)
{
pIn->GuiAppShifts.nStyle = anStyle;
pIn->GuiAppShifts.nStyleEx = anStyleEx;
wchar_t szOurExe[MAX_PATH*2] = L"";
GetModuleFileName(NULL, szOurExe, countof(szOurExe));
lstrcpyn(pIn->GuiAppShifts.szExeName, PointToName(szOurExe), countof(pIn->GuiAppShifts.szExeName));
wchar_t szGuiPipeName[128];
msprintf(szGuiPipeName, countof(szGuiPipeName), CEGUIPIPENAME, L".", (DWORD)ghConEmuWnd);
CESERVER_REQ* pOut = ExecuteCmd(szGuiPipeName, pIn, 10000, NULL);
if (pOut)
{
gGuiClientStyles = pOut->GuiAppShifts;
ExecuteFreeResult(pOut);
}
ExecuteFreeResult(pIn);
}
}
rcShift = gGuiClientStyles.Shifts;
rcGui.left += rcShift.left; rcGui.top += rcShift.top;
rcGui.right += rcShift.right; rcGui.bottom += rcShift.bottom;
}示例7: HandleRecData
/******************************************************************
** 函数名: HandleRecData
** 输 入: 无
** 描 述: 处理串口接收到的数据
**
** 全局变量:
** 调用模块:
** 作 者: zcs
** 日 期: 2015-04-21
** 修 改:
** 日 期:
** 版 本: 1.0
*******************************************************************/
void HandleRecData(void)
{
if (WorkQueueData(&Queue,&get_whole_data)) //判定接收到的指令是否匹配正确，若正确则继续运行，否则退出
{
ExecuteCmd(PretreatBuffer);
}
}示例8: MakeId
bool DbgGdb::WriteCommand( const wxString &command, DbgCmdHandler *handler )
{
wxString cmd;
wxString id = MakeId( );
cmd << id << command;
if ( !ExecuteCmd( cmd ) ) {
return false;
}
RegisterHandler( id, handler );
return true;
}示例9: RegDeleteKey
//安装驱动
BOOL VirtualDrive::InstallDriver()
{
if (!IsISOCmdExist())
{
return FALSE;
}
//清理旧驱动信息
CString subPath= L"SYSTEM\\CurrentControlSet\\Services\\ISODrive";
RegDeleteKey(HKEY_LOCAL_MACHINE,subPath);
//安装新驱动
ExecuteCmd(L"CMD /C ISOCmd -Install",m_CurrentISOCmdDirectory);
//设定盘符数量
ExecuteCmd(L"CMD /C ISOCmd -Number 1",m_CurrentISOCmdDirectory);
//获取当前盘符
m_DrivrName=GetDriveName();
if (!IsDriveLoadSuccess())
{
return FALSE;
}
return TRUE;
}示例10: ExecuteCmd
//加载镜像
BOOL VirtualDrive::Mount(CString csImagePath)
{
//m_DriveNameArray.Add(csImagePath);
//CHAR chDriveLabel[10];
//_itoa_s(m_DriveNameArray.GetCount()-1,chDriveLabel,10);
//ExecuteCmd(L"CMD /C ISOCmd -Mount "+CString(chDriveLabel)+L": \""+csImagePath+L"\"",m_CurrentISOCmdDirectory);
ExecuteCmd(L"CMD /C ISOCmd -Mount 0: \""+csImagePath+L"\"",m_CurrentISOCmdDirectory);
//ExecuteCmdAsyn(L"ISOCmd -Mount 0: \""+csImagePath+L"\"",m_CurrentISOCmdDirectory);
SHChangeNotify (SHCNE_DRIVEADD, SHCNF_PATH, m_DrivrName, NULL);
m_DriveState=TRUE;
return TRUE;
}示例11: _itoa_s
//卸载镜像
BOOL VirtualDrive::UnMount()
{
CHAR chDriveLabel[10];
_itoa_s(m_DriveNameArray.GetCount()-1,chDriveLabel,10);
//ExecuteCmdAsyn(L"ISOCmd -Eject "+CString(chDriveLabel)+L":",m_CurrentISOCmdDirectory);
ExecuteCmd(L"CMD /C ISOCmd -Eject 0:",m_CurrentISOCmdDirectory);
SHChangeNotify (SHCNE_DRIVEREMOVED, SHCNF_PATH, m_DrivrName, NULL);
m_DriveState=FALSE;
//此处必须有否则驱动卸载不完全
Sleep(500);
return TRUE;
}示例12: GuiMessageBox
int GuiMessageBox(HWND hConEmuWndRoot, LPCWSTR asText, LPCWSTR asTitle, int anBtns)
{
int nResult = 0;
if (hConEmuWndRoot)
{
HWND hConWnd = myGetConsoleWindow();
CESERVER_REQ *pIn = (CESERVER_REQ*)malloc(sizeof(*pIn));
ExecutePrepareCmd(pIn, CECMD_ASSERT, sizeof(CESERVER_REQ_HDR)+sizeof(MyAssertInfo));
pIn->AssertInfo.nBtns = anBtns;
_wcscpyn_c(pIn->AssertInfo.szTitle, countof(pIn->AssertInfo.szTitle), asTitle, countof(pIn->AssertInfo.szTitle)); //-V501
_wcscpyn_c(pIn->AssertInfo.szDebugInfo, countof(pIn->AssertInfo.szDebugInfo), asText, countof(pIn->AssertInfo.szDebugInfo)); //-V501
wchar_t szGuiPipeName[128];
msprintf(szGuiPipeName, countof(szGuiPipeName), CEGUIPIPENAME, L".", (DWORD)hConEmuWndRoot); //-V205
CESERVER_REQ* pOut = ExecuteCmd(szGuiPipeName, pIn, 1000, hConWnd);
free(pIn);
if (pOut)
{
if (pOut->hdr.cbSize > sizeof(CESERVER_REQ_HDR))
{
nResult = pOut->dwData[0];
}
ExecuteFreeResult(pOut);
}
}
else
{
//_ASSERTE(hConEmuWndRoot!=NULL);
// Избежать статической линковки к user32
HMODULE hUser32 = GetModuleHandle(L"User32.dll");
if (hUser32 == NULL)
hUser32 = LoadLibrary(L"User32.dll");
typedef int (WINAPI* MessageBoxW_T)(HWND, LPCWSTR, LPCWSTR, UINT);
MessageBoxW_T _MessageBoxW = hUser32 ? (MessageBoxW_T)GetProcAddress(hUser32, "MessageBoxW") : NULL;
if (_MessageBoxW)
{
nResult = _MessageBoxW(NULL, asText, asTitle, MB_SYSTEMMODAL|anBtns);
}
else
{
#ifdef _DEBUG
_CrtDbgBreak();
#endif
}
}
return nResult;
}示例13: realarm_sdfuse
/***********************************************************************
*@函数名称: realarm_sdfuse
*@功能描述: sdfuse菜单显示和功能选择
*@参数: 无
*@返回: 无
*@备注： 无
**********************************************************************/
void realarm_sdfuse(void)
{
unsigned char select;
while(1)
{
printf("\n#**** Select the fuction ****#\n");
printf("[1] Flash all image\n");
printf("[2] Flash u-boot\n");
printf("[3] Flash boot\n");
printf("[4] Flash system\n");
printf("[5] Flash cache\n");
printf("[6] Flash userdata\n");
printf("[7] Exit\n");
printf("Enter your Selection:");
select = getc();
printf("%c\n", select >= ' ' && select <= 127 ? select : ' ');
switch(select)
{
case '1':
ExecuteCmd("sdfuse flash all");
break;
case '2':
ExecuteCmd("sdfuse flash 2ndboot");
ExecuteCmd("sdfuse flash u-boot");
break;
case '3':
ExecuteCmd("sdfuse flash boot");
break;
case '4':
ExecuteCmd("sdfuse flash system");
break;
case '5':
ExecuteCmd("sdfuse flash cache");
break;
case '6':
ExecuteCmd("sdfuse flash userdata");
break;
case '7':
return;
default:
break;
}
}
}示例14: ExecuteHkCmd
// Выполнить в ConEmuHk
CESERVER_REQ* ExecuteHkCmd(DWORD dwHkPID, CESERVER_REQ* pIn, HWND hOwner)
{
wchar_t szPipeName[128];
if (!dwHkPID)
return NULL;
DWORD nLastErr = GetLastError();
//_wsprintf(szPipeName, SKIPLEN(countof(szPipeName)) CESERVERPIPENAME, L".", (DWORD)dwSrvPID);
msprintf(szPipeName, countof(szPipeName), CEHOOKSPIPENAME, L".", (DWORD)dwHkPID);
CESERVER_REQ* lpRet = ExecuteCmd(szPipeName, pIn, 1000, hOwner);
SetLastError(nLastErr); // Чтобы не мешать процессу своими возможными ошибками общения с пайпом
return lpRet;
}示例15: ExecuteSrvCmd
// Выполнить в ConEmuC
CESERVER_REQ* ExecuteSrvCmd(DWORD dwSrvPID, CESERVER_REQ* pIn, HWND hOwner, BOOL bAsyncNoResult, DWORD nTimeout /*= 0*/)
{
wchar_t szPipeName[128];
if (!dwSrvPID)
return NULL;
DWORD nLastErr = GetLastError();
//_wsprintf(szPipeName, SKIPLEN(countof(szPipeName)) CESERVERPIPENAME, L".", (DWORD)dwSrvPID);
msprintf(szPipeName, countof(szPipeName), CESERVERPIPENAME, L".", (DWORD)dwSrvPID);
CESERVER_REQ* lpRet = ExecuteCmd(szPipeName, pIn, nTimeout, hOwner, bAsyncNoResult, dwSrvPID);
_ASSERTE(pIn->hdr.bAsync == bAsyncNoResult);
SetLastError(nLastErr); // Чтобы не мешать процессу своими возможными ошибками общения с пайпом
return lpRet;
}