C++ E1000_READ_REG函数代码示例

static ssize_t igb_txbpacks(struct kobject *kobj,
			    struct kobj_attribute *attr, char *buf)
{
	struct e1000_hw *hw;
	struct igb_adapter *adapter = igb_get_adapter(kobj);	
	if (adapter == NULL)
		return snprintf(buf, PAGE_SIZE, "error: no adapter\n");

	hw = &adapter->hw;
	if (hw == NULL)
		return snprintf(buf, PAGE_SIZE, "error: no hw data\n");

	return snprintf(buf, PAGE_SIZE, "%d\n", E1000_READ_REG(hw, E1000_BPTC));

}

/**
 * e1000_close - Disables a network interface
 *
 * @v netdev	network interface device structure
 *
 **/
static void e1000e_close ( struct net_device *netdev )
{
	struct e1000_adapter *adapter = netdev_priv ( netdev );
	struct e1000_hw *hw = &adapter->hw;
	uint32_t rctl;
	uint32_t icr;

	DBGP ( "e1000_close\n" );

	/* Acknowledge interrupts */
	icr = E1000_READ_REG ( hw, E1000_ICR );

	e1000e_irq_disable ( adapter );

	/* disable receives */
	rctl = E1000_READ_REG ( hw, E1000_RCTL );
	E1000_WRITE_REG ( hw, E1000_RCTL, rctl & ~E1000_RCTL_EN );
	e1e_flush();

	e1000e_reset ( adapter );

	e1000e_free_tx_resources ( adapter );
	e1000e_free_rx_resources ( adapter );
}

/**
 *  e1000_release_swfw_sync_i210 - Release SW/FW semaphore
 *  @hw: pointer to the HW structure
 *  @mask: specifies which semaphore to acquire
 *
 *  Release the SW/FW semaphore used to access the PHY or NVM.  The mask
 *  will also specify which port we're releasing the lock for.
 **/
void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
{
	u32 swfw_sync;

	DEBUGFUNC("e1000_release_swfw_sync_i210");

	while (e1000_get_hw_semaphore_i210(hw) != E1000_SUCCESS)
		; /* Empty */

	swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
	swfw_sync &= ~mask;
	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);

	e1000_put_hw_semaphore_i210(hw);
}

/**
 *  e1000_check_for_rst_pf - checks to see if the VF has reset
 *  @hw: pointer to the HW structure
 *  @vf_number: the VF index
 *
 *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
 **/
static s32 e1000_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number)
{
	u32 vflre = E1000_READ_REG(hw, E1000_VFLRE);
	s32 ret_val = -E1000_ERR_MBX;

	DEBUGFUNC("e1000_check_for_rst_pf");

	if (vflre & (1 << vf_number)) {
		ret_val = E1000_SUCCESS;
		E1000_WRITE_REG(hw, E1000_VFLRE, (1 << vf_number));
		hw->mbx.stats.rsts++;
	}

	return ret_val;
}

static int igb_txmpacks(char *page, char **start, off_t off, int count, 
			 int *eof, void *data)
{
	struct e1000_hw *hw;
	struct igb_adapter *adapter = (struct igb_adapter *)data;
	if (adapter == NULL)
		return snprintf(page, count, "error: no adapter\n");

	hw = &adapter->hw;
	if (hw == NULL)
		return snprintf(page, count, "error: no hw data\n");

	return snprintf(page, count, "%d\n", 
			E1000_READ_REG(hw, E1000_MPTC));
}

STATIC VOID StandBy(PADAPTER_STRUCT Adapter)
 {
    UINT32 EecdRegValue;

    EecdRegValue = E1000_READ_REG(Eecd);

    EecdRegValue &= ~(E1000_EECS | E1000_EESK);

    E1000_WRITE_REG(Eecd, EecdRegValue);

    DelayInMicroseconds(5);

    EecdRegValue |= E1000_EECS;

    E1000_WRITE_REG(Eecd, EecdRegValue);
}

VOID IdLedOff(PADAPTER_STRUCT Adapter)
{
    UINT32 CtrlRegValue;

    if (Adapter->AdapterStopped) {
        return;
    }

    CtrlRegValue = E1000_READ_REG(Ctrl);

    CtrlRegValue |= E1000_CTRL_SWDPIO0;

    CtrlRegValue &= ~E1000_CTRL_SWDPIN0;

    E1000_WRITE_REG(Ctrl, CtrlRegValue);
}

/**
 * igb_ptp_tx_work
 * @work: pointer to work struct
 *
 * This work function polls the TSYNCTXCTL valid bit to determine when a
 * timestamp has been taken for the current stored skb.
 */
void igb_ptp_tx_work(struct work_struct *work)
{
	struct igb_adapter *adapter = container_of(work, struct igb_adapter,
						   ptp_tx_work);
	struct e1000_hw *hw = &adapter->hw;
	u32 tsynctxctl;

	if (!adapter->ptp_tx_skb)
		return;

	tsynctxctl = E1000_READ_REG(hw, E1000_TSYNCTXCTL);
	if (tsynctxctl & E1000_TSYNCTXCTL_VALID)
		igb_ptp_tx_hwtstamp(adapter);
	else
		/* reschedule to check later */
		schedule_work(&adapter->ptp_tx_work);
}

/**
 *  e1000_obtain_mbx_lock_pf - obtain mailbox lock
 *  @hw: pointer to the HW structure
 *  @vf_number: the VF index
 *
 *  return SUCCESS if we obtained the mailbox lock
 **/
static s32 e1000_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
{
	s32 ret_val = -E1000_ERR_MBX;
	u32 p2v_mailbox;

	DEBUGFUNC("e1000_obtain_mbx_lock_pf");

	/* Take ownership of the buffer */
	E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);

	/* reserve mailbox for vf use */
	p2v_mailbox = E1000_READ_REG(hw, E1000_P2VMAILBOX(vf_number));
	if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
		ret_val = E1000_SUCCESS;

	return ret_val;
}

/**
 *  e1000_write_nvm_srwr - Write to Shadow Ram using EEWR
 *  @hw: pointer to the HW structure
 *  @offset: offset within the Shadow Ram to be written to
 *  @words: number of words to write
 *  @data: 16 bit word(s) to be written to the Shadow Ram
 *
 *  Writes data to Shadow Ram at offset using EEWR register.
 *
 *  If e1000_update_nvm_checksum is not called after this function , the
 *  Shadow Ram will most likely contain an invalid checksum.
 **/
static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
				u16 *data)
{
	struct e1000_nvm_info *nvm = &hw->nvm;
	u32 i, k, eewr = 0;
	u32 attempts = 100000;
	s32 ret_val = E1000_SUCCESS;

	DEBUGFUNC("e1000_write_nvm_srwr");

	/*
	 * A check for invalid values:  offset too large, too many words,
	 * too many words for the offset, and not enough words.
	 */
	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
	    (words == 0)) {
		DEBUGOUT("nvm parameter(s) out of bounds\n");
		ret_val = -E1000_ERR_NVM;
		goto out;
	}

	for (i = 0; i < words; i++) {
		eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
			(data[i] << E1000_NVM_RW_REG_DATA) |
			E1000_NVM_RW_REG_START;

		E1000_WRITE_REG(hw, E1000_SRWR, eewr);

		for (k = 0; k < attempts; k++) {
			if (E1000_NVM_RW_REG_DONE &
			    E1000_READ_REG(hw, E1000_SRWR)) {
				ret_val = E1000_SUCCESS;
				break;
			}
			usec_delay(5);
		}

		if (ret_val != E1000_SUCCESS) {
			DEBUGOUT("Shadow RAM write EEWR timed out\n");
			break;
		}
	}

out:
	return ret_val;
}

int wait_packet_function_ptr(void *data, int mode) {
  struct e1000_adapter *adapter = (struct e1000_adapter*)data;

  if(unlikely(enable_debug)) printk("[wait_packet_function_ptr] called [mode=%d]\n", mode);

  if(mode == 1) {
    struct e1000_ring *rx_ring = adapter->rx_ring;
    union e1000_rx_desc_extended *rx_desc;

    u16 i = E1000_READ_REG(&adapter->hw, E1000_RDT(0));
    
    /* Very important: update the value from the register set from userland.
     * Here i is the last I've read (zero-copy implementation) */
    if(++i == rx_ring->count) i = 0;
    /* Here i is the next I have to read */
    
    rx_ring->next_to_clean = i;

    rx_desc = E1000_RX_DESC_EXT(*rx_ring, rx_ring->next_to_clean);
    if(unlikely(enable_debug)) printk("[wait_packet_function_ptr] Check if a packet is arrived\n");

    prefetch(rx_desc);

    if(!(le32_to_cpu(rx_desc->wb.upper.status_error) & E1000_RXD_STAT_DD)) {
      adapter->dna.interrupt_received = 0;

#if 0
      if(!adapter->dna.interrupt_enabled) {
	e1000_irq_enable(adapter), adapter->dna.interrupt_enabled = 1;
	if(unlikely(enable_debug)) printk("[wait_packet_function_ptr] Packet not arrived yet: enabling interrupts\n");
      }
#endif
    } else
      adapter->dna.interrupt_received = 1;

    return(le32_to_cpu(rx_desc->wb.upper.status_error) & E1000_RXD_STAT_DD);
  } else {
    if(adapter->dna.interrupt_enabled) {
      e1000_irq_disable(adapter);
      adapter->dna.interrupt_enabled = 0;
      if(unlikely(enable_debug)) printk("[wait_packet_function_ptr] Disabled interrupts\n");
    }
    return(0);
  }
}

STATIC UINT16 WaitEepromCommandDone(PADAPTER_STRUCT Adapter)
 {
    UINT32 EecdRegValue;
    UINT i;

    StandBy(Adapter);

    for (i = 0; i < 200; i++) {
        EecdRegValue = E1000_READ_REG(Eecd);

        if (EecdRegValue & E1000_EEDO)
            return (TRUE);

        DelayInMicroseconds(5);
    }

    return (FALSE);
}

/**
 *  e1000_pool_flash_update_done_i210 - Pool FLUDONE status.
 *  @hw: pointer to the HW structure
 *
 **/
s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw)
{
	s32 ret_val = -E1000_ERR_NVM;
	u32 i, reg;

	DEBUGFUNC("e1000_pool_flash_update_done_i210");

	for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
		reg = E1000_READ_REG(hw, E1000_EECD);
		if (reg & E1000_EECD_FLUDONE_I210) {
			ret_val = E1000_SUCCESS;
			break;
		}
		usec_delay(5);
	}

	return ret_val;
}

VOID ForceMacFlowControlSetting(PADAPTER_STRUCT Adapter)
 {
    UINT32 CtrlRegValue;

    DEBUGFUNC("ForceMacFlowControlSetting")

        CtrlRegValue = E1000_READ_REG(Ctrl);

    switch (Adapter->FlowControl) {
    case FLOW_CONTROL_NONE:

        CtrlRegValue &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
        break;

    case FLOW_CONTROL_RECEIVE_PAUSE:

        CtrlRegValue &= (~E1000_CTRL_TFCE);
        CtrlRegValue |= E1000_CTRL_RFCE;
        break;

    case FLOW_CONTROL_TRANSMIT_PAUSE:

        CtrlRegValue &= (~E1000_CTRL_RFCE);
        CtrlRegValue |= E1000_CTRL_TFCE;
        break;

    case FLOW_CONTROL_FULL:

        CtrlRegValue |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
        break;

    default:

        DEBUGOUT("Flow control param set incorrectly\n");
        ASSERT(0);

        break;
    }

    if (Adapter->MacType == MAC_WISEMAN_2_0)
        CtrlRegValue &= (~E1000_CTRL_TFCE);

    E1000_WRITE_REG(Ctrl, CtrlRegValue);
}

/**
 *  e1000_read_invm_version - Reads iNVM version and image type
 *  @hw: pointer to the HW structure
 *  @invm_ver: version structure for the version read
 *
 *  Reads iNVM version and image type.
 **/
s32 e1000_read_invm_version(struct e1000_hw *hw,
			    struct e1000_fw_version *invm_ver)
{
	u32 *record = NULL;
	u32 *next_record = NULL;
	u32 i = 0;
	u32 invm_dword = 0;
	u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE /
					     E1000_INVM_RECORD_SIZE_IN_BYTES);
	u32 buffer[E1000_INVM_SIZE];
	s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
	u16 version = 0;

	DEBUGFUNC("e1000_read_invm_version");

	/* Read iNVM memory */
	for (i = 0; i < E1000_INVM_SIZE; i++) {
		invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i));
		buffer[i] = invm_dword;
	}

	/* Read version number */
	for (i = 1; i < invm_blocks; i++) {
		record = &buffer[invm_blocks - i];
		next_record = &buffer[invm_blocks - i + 1];

		/* Check if we have first version location used */
		if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) {
			version = 0;
			status = E1000_SUCCESS;
			break;
		}
		/* Check if we have second version location used */
		else if ((i == 1) &&
			 ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) {
			version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
			status = E1000_SUCCESS;
			break;
		}
		/*
		 * Check if we have odd version location
		 * used and it is the last one used
		 */
		else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) &&