当前位置: 首页>>代码示例>>C++>>正文


C++ DumpDebug函数代码示例

本文整理汇总了C++中DumpDebug函数的典型用法代码示例。如果您正苦于以下问题:C++ DumpDebug函数的具体用法?C++ DumpDebug怎么用?C++ DumpDebug使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了DumpDebug函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: adpIsHalted

// sangam dbg : used by the set and query info but linux not supported
// is adapter halted?
BOOLEAN adpIsHalted(PMINIPORT_ADAPTER Adapter)
{
    int		i;
    PMINIPORT_ADAPTER*	p = g_Adapters;

	ENTER;
    // check first one
    if (*p == Adapter) {
	// found
		if (g_HaltedFlags[0]) {
		    DumpDebug(HARDWARE, " Adapter (%lu, 0) halted: YES", (unsigned long)Adapter);
		}
		return g_HaltedFlags[0];
    }

    p++;
    // check others
    for (i = 1; i < ADAPTER_MAX_NUMBER; i++, p++) {
	if (*p == Adapter) {
	    // found
	    if (g_HaltedFlags[i]) {
			DumpDebug(HARDWARE, " Adapter (%lu, %d) halted: YES", (unsigned long)Adapter, i);
	    }
	    return g_HaltedFlags[i];
	}
    }
    DumpDebug(HARDWARE, "Adapter (%lu) halted (removed): YES", (unsigned long)Adapter);

    // not found, assume that it was removed already
    return TRUE;
}
开发者ID:AproSamurai,项目名称:Arcturus,代码行数:33,代码来源:adapter.c

示例2: hwRemove

VOID hwRemove(MINIPORT_ADAPTER *Adapter)
{
	PBUFFER_DESCRIPTOR  dsc;
    ENTER;

	//sangam :Free the pending data packets and control packets
	while(!QueueEmpty(Adapter->hw.Q_Send.Head)) {	//sangam dbg : used only for data packet so free skb
		DumpDebug(DISPATCH, "<1> Freeing Q_Send");
		dsc = (PBUFFER_DESCRIPTOR) QueueGetHead(Adapter->hw.Q_Send.Head);
		if (!dsc) {
			DumpDebug(DISPATCH, "<1> Fail...node is null");
			continue;
		}
		QueueRemoveHead(Adapter->hw.Q_Send.Head);
		if(dsc->Buffer)
			kfree(dsc->Buffer);
		if(dsc)
			kfree(dsc);
	}
	// stop data out buffer
//	if (Adapter->hw.ReceiveBuffer!= NULL) 
//			kfree(Adapter->hw.ReceiveBuffer);
	// stop TempData out buffer
#if 0	//cky 20100624
	if (Adapter->hw.ReceiveTempBuffer!= NULL) 
			kfree(Adapter->hw.ReceiveTempBuffer);
#endif

	hwGPIODeInit();	
	LEAVE;
}
开发者ID:Silvist,项目名称:kernel-R910,代码行数:31,代码来源:hardware.c

示例3: DoConvolution

void
DoConvolution(FFT_DATA_TYPE *FFTNum,int Cache,size_t Len2)
{
StartTimer(ConvTime);
if (Cache==-2) /* In memory convolution of both nums */
  {FFT_DATA_TYPE *FFTNum2=FFTNum+Len2;
   DumpDebug("Cm...");
   DoScrambledFHTConv(FFTNum,FFTNum2,Len2);
  }
else if (Cache==-1)  /* In memory self convolution. */
  {
   DumpDebug("C");
   DoScrambledFHTConv(FFTNum,FFTNum,Len2);
  }
#ifdef VIRTUAL_CACHE
else /* Virtual Mem based convolution. */
  {FFT_DATA_TYPE *Num1=FFTNum;
   FFT_DATA_TYPE *Num2=FFTCash[Cache].Mem;

   if (Num2==NULL)
     FatalError("Cache %d doesn't exist.\n",Cache);

   DumpDebug("C%d...",Cache);
   DoScrambledFHTConv(Num1,Num2,Len2);
  }
#else
#error
#if 0
/*
** Eyuk!  What a kludge!
*/
else
  {FILE *f;FFT_DATA_TYPE h1p,h1m;
开发者ID:ProjectZeroSlackr,项目名称:PiCalc,代码行数:33,代码来源:fft.c

示例4: localFreeOffscreenLinear

static void
localFreeOffscreenLinear(FBLinearPtr linear)
{
    FBManagerPtr offman;
    FBLinearLinkPtr pLink, pLinkPrev = NULL;
    ScreenPtr pScreen = linear->pScreen;

    offman = (FBManagerPtr) dixLookupPrivate(&pScreen->devPrivates,
                                             xf86FBScreenKey);
    pLink = offman->LinearAreas;
    if (!pLink)
        return;

    while (&(pLink->linear) != linear) {
        pLinkPrev = pLink;
        pLink = pLink->next;
        if (!pLink)
            return;
    }

    if (pLink->area) {          /* really an XY area */
        DebugF("FREEING AREA\n");
        localFreeOffscreenArea(pLink->area);
        if (pLinkPrev)
            pLinkPrev->next = pLink->next;
        else
            offman->LinearAreas = pLink->next;
        free(pLink);
        DumpDebug(offman->LinearAreas);
        return;
    }

    pLink->free = 1;

    if (pLink->next && pLink->next->free) {
        FBLinearLinkPtr p = pLink->next;

        pLink->linear.size += p->linear.size;
        pLink->next = p->next;
        free(p);
    }

    if (pLinkPrev) {
        if (pLinkPrev->next && pLinkPrev->next->free && !pLinkPrev->area) {
            FBLinearLinkPtr p = pLinkPrev->next;

            pLinkPrev->linear.size += p->linear.size;
            pLinkPrev->next = p->next;
            free(p);
        }
    }

    DebugF("FREEING LINEAR\n");
    DumpDebug(offman->LinearAreas);
}
开发者ID:MrKepzie,项目名称:xserver,代码行数:55,代码来源:xf86fbman.c

示例5: hwSetInterface

void hwSetInterface()
{
	ENTER;

	g_dwLineState = WimaxMode();

	s3c_gpio_cfgpin(WIMAX_WAKEUP, S3C_GPIO_SFN(1));
	s3c_gpio_cfgpin(WIMAX_IF_MODE0, S3C_GPIO_SFN(1));

	if(g_dwLineState == SDIO_MODE)
	{	
		gpio_set_value(WIMAX_WAKEUP, GPIO_LEVEL_HIGH);
		gpio_set_value(WIMAX_IF_MODE0, GPIO_LEVEL_HIGH);

		msleep(10);

		DatadwValue = 1;
		ControldwValue = 1;
		DumpDebug(HARDWARE, "Interface mode SDIO_MODE");
	}
	else if(g_dwLineState == WTM_MODE || g_dwLineState == AUTH_MODE)
	{
		gpio_set_value(WIMAX_WAKEUP, GPIO_LEVEL_LOW);
		gpio_set_value(WIMAX_IF_MODE0, GPIO_LEVEL_LOW);

		msleep(10);
		
		DatadwValue = 0;
		ControldwValue = 0;
		DumpDebug(HARDWARE, "Interface mode WTM_MODE || AUTH_MODE");
	}
	else if(g_dwLineState == DM_MODE)
	{
		gpio_set_value(WIMAX_WAKEUP, GPIO_LEVEL_HIGH);
		gpio_set_value(WIMAX_IF_MODE0, GPIO_LEVEL_LOW);

		msleep(10);

		DumpDebug(HARDWARE, "Interface mode DM_MODE");
	}
	else if(g_dwLineState == USB_MODE || g_dwLineState ==  USIM_RELAY_MODE)
	{
		gpio_set_value(WIMAX_WAKEUP, GPIO_LEVEL_LOW);
		gpio_set_value(WIMAX_IF_MODE0, GPIO_LEVEL_HIGH);

		msleep(10);

		DatadwValue = 1;
		ControldwValue = 0;
		DumpDebug(HARDWARE, "Interface mode USB_MODE (USIM_RELAY)");
	}

	LEAVE;
}
开发者ID:Silvist,项目名称:kernel-R910,代码行数:54,代码来源:hardware.c

示例6: hwInit

INT hwInit(MINIPORT_ADAPTER *Adapter)
{
	ENTER;

	static PVOID ReceiveBuffer = NULL;	//cky 20100624
	if(!hwGPIOInit())
	{
		DumpDebug(DISPATCH, "hwInit: Can't intialize GPIO");
		return STATUS_UNSUCCESSFUL;
	}

	if (ReceiveBuffer == NULL)
	{
		DumpDebug(DISPATCH, "Alloc ReceiveBuffer");
		ReceiveBuffer = kmalloc(SDIO_BUFFER_SIZE+8, GFP_KERNEL); //sumanth: the extra space required to copy ethernet header
		if (ReceiveBuffer == NULL)
		{
			DumpDebug(DISPATCH, "kmalloc fail!!");
			return -ENOMEM;
		}
	}
	else
	{
		DumpDebug(DISPATCH, "ReceiveBuffer already allocated - skip");
	}

	memset(&Adapter->hw,0,sizeof(HARDWARE_INFO));
/*	Adapter->hw.ReceiveBuffer= kmalloc(SDIO_BUFFER_SIZE, GFP_ATOMIC);
	if(Adapter->hw.ReceiveBuffer ==NULL) {
		return -ENOMEM;
	}*/ //sumanth: this buffer is not logically required hence it is eliminated
#if 1	//cky 20100624
	Adapter->hw.ReceiveTempBuffer = ReceiveBuffer;
#else
	Adapter->hw.ReceiveTempBuffer= kmalloc(SDIO_BUFFER_SIZE+8, GFP_ATOMIC); //sumanth: the extra space required to copy ethernet header
	if(Adapter->hw.ReceiveTempBuffer ==NULL) {
//			if(Adapter->hw.ReceiveBuffer)			//sumanth no point in freeing a NULL pointer
//				kfree(Adapter->hw.ReceiveTempBuffer);
		return -ENOMEM;
	}
#endif
	// For sending data and control packets
	QueueInitList(Adapter->hw.Q_Send.Head);
	spin_lock_init(&Adapter->hw.Q_Send.Lock);
	
	INIT_WORK(&Adapter->work, hwTransmitThread);
	init_waitqueue_head(&Adapter->hFWDNEndEvent);

	init_completion(&Adapter->hAwakeAckEvent);
	
	return STATUS_SUCCESS;
	LEAVE;
}
开发者ID:Silvist,项目名称:kernel-R910,代码行数:53,代码来源:hardware.c

示例7: GetMacAddress

/* get MAC address from device */
VOID GetMacAddress(MINIPORT_ADAPTER *Adapter)
{
	UINT nCount = 0;
	int nResult = 0;
	HW_PRIVATE_PACKET req; 
	ENTER;

	req.Id0   = 'W';
	req.Id1   = 'P';
	req.Code  = HwCodeMacRequest;
	req.Value = 0;
	Adapter->acquired_mac_address = FALSE;
	
	do {
		if(Adapter->bHaltPending)
			return;

		sdio_claim_host(Adapter->func);
		//nResult = sdio_memcpy_toio(Adapter->func,SDIO_DATA_PORT_REG, &req, sizeof(HW_PRIVATE_PACKET));
		nResult = sd_send(Adapter, &req, sizeof(HW_PRIVATE_PACKET));
		
		if(nResult != 0) 
			DumpDebug(DRV_ENTRY,"Send GetMacAddress Request msg but error occurred!! res = %d",nResult);

		sdio_release_host(Adapter->func);

		if(!wait_for_completion_interruptible_timeout(&Adapter->hFWInitCompleteEvent, msecs_to_jiffies(HARDWARE_START_TIMEOUT))) {
			DumpDebug(DRV_ENTRY, "timedout mac req, retry..");

			if(nCount >= HARDWARE_MAX_MAC_RESPONSES || Adapter->bHaltPending == TRUE) {
				DumpDebug(DRV_ENTRY,"Can't get mac address, exceeded number of retries (%d)",nCount);
				Adapter->bHaltPending = TRUE;
				wake_up_interruptible(&Adapter->hFWDNEndEvent);
				gpio_wimax_poweroff();
				gpio_wimax_poweron();
				break;
			}
			nCount++;
			continue;
		}
		// If wait exit before timeout then mac assigned or surprise remove
		if(Adapter->acquired_mac_address == TRUE) {
			DumpDebug(DRV_ENTRY,"MAC Address acquired");
			break;
		}
//		msleep(500);
	
	} while(TRUE);

	return;
	LEAVE;
}
开发者ID:Silvist,项目名称:kernel-R910,代码行数:53,代码来源:hardware.c

示例8: DoConvolutions

static void
DoConvolutions(int Cache,size_t FFTLen2,size_t StartP, size_t EndP)
{size_t Pass;
 ModInt *Num1,*Num2;

StartTimer(ConvTime);
if (Cache==-2) /* In memory convolution of both nums */
  {ModInt *FFTNum2=FFTNum+FFTLen2*NPrimes;
   DumpDebug("Cm...");
   for (Pass=StartP;Pass < EndP;Pass++)
     {
      SetModPrime(Pass);
      Num1=FFTNum+FFTLen2*(Pass-StartP);
      Num2=FFTNum2+FFTLen2*(Pass-StartP);
      PrepVector(Prime,FFTLen2);
      VectorModMul( Num1, Num2, FFTLen2);
     }
  }
else if (Cache==-1)  /* In memory self convolution. */
  {
   DumpDebug("C");
   for (Pass=StartP;Pass < EndP;Pass++)
     {
      SetModPrime(Pass);
      Num1=FFTNum+FFTLen2*(Pass-StartP);
      PrepVector(Prime,FFTLen2);
      VectorModMul( Num1, Num1, FFTLen2);
     }
  }
#ifdef VIRTUAL_CACHE
else /* Virtual Mem based convolution. */
  {
   Num1=FFTNum;
   Num2=(ModInt*)FFTCash[Cache].Mem;

   if (Num2==NULL)
     FatalError("Cache %d doesn't exist.\n",Cache);

   DumpDebug("C%d...",Cache);
   for (Pass=StartP;Pass < EndP;Pass++)
     {
      SetModPrime(Pass);
      PrepVector(Prime,FFTLen2);
      VectorModMul( Num1, Num2, FFTLen2);
      Num1+=FFTLen2;Num2+=FFTLen2;
     }
  }
#else
else /* Disk based convolution. */
  {FILE *f;
开发者ID:ProjectZeroSlackr,项目名称:PiCalc,代码行数:50,代码来源:bigmul.c

示例9: proc_write_sleepmode

static int proc_write_sleepmode(struct file *foke, const char *buffer, unsigned long count, void *data)
{
	if (buffer[0] == '0' && g_dwSleepMode == 1)
	{
		DumpDebug("WiMAX Sleep Mode: VI");
		g_dwSleepMode = 0;
	}
	else if (buffer[0] == '1' && g_dwSleepMode == 0)
	{
		DumpDebug("WiMAX Sleep Mode: IDLE");
		g_dwSleepMode = 1;
	}

	return 0;
}
开发者ID:Silvist,项目名称:kernel-R910,代码行数:15,代码来源:wimaxproc.c

示例10: SendCmdPacket

BOOLEAN SendCmdPacket(PMINIPORT_ADAPTER Adapter, unsigned short uiCmdId)
{
	PHW_PACKET_HEADER pPktHdr;
	UCHAR pTxPkt[CMD_MSG_TOTAL_LENGTH];
	UINT uiBufOffset;
	PWIMAX_MESSAGE_HEADER pWibroMsgHdr;
	int status = 0;
	UINT dwTxSize;

	pPktHdr = (PHW_PACKET_HEADER)pTxPkt;
	pPktHdr->Id0 = 'W';
	pPktHdr->Id1 = 'C';	
	pPktHdr->Length = be16_to_cpu(CMD_MSG_TOTAL_LENGTH); 

	uiBufOffset = sizeof(HW_PACKET_HEADER);
	pWibroMsgHdr = (PWIMAX_MESSAGE_HEADER)(pTxPkt + uiBufOffset);
	pWibroMsgHdr->MsgType = be16_to_cpu(ETHERTYPE_DL);
	pWibroMsgHdr->MsgID = be16_to_cpu(uiCmdId);	
	pWibroMsgHdr->MsgLength = be32_to_cpu(CMD_MSG_LENGTH);
		
	dwTxSize = CMD_MSG_TOTAL_LENGTH;

	status = sd_send(Adapter, pTxPkt, dwTxSize);
	if(status != STATUS_SUCCESS) {
		// crc error or data error - set PCWRT '1' & send current type A packet again		
		DumpDebug(FW_DNLD, "hwSdioWrite : crc error");
		return status;//goto rewrite;
	}
	return status;
}
开发者ID:AproSamurai,项目名称:Arcturus,代码行数:30,代码来源:download.c

示例11: LoadWiMaxImage

int LoadWiMaxImage(void)
{	
	DWORD dwImgSize;		
	unsigned long buforder;
	struct file *fp;	
	int read_size = 0;
	
	if ( g_dwLineState == AUTH_MODE)
	{
		fp = klib_fopen(WIMAX_LOADER_PATH, O_RDONLY, 0);	// download mode
	}
	else
	{
		fp = klib_fopen(WIMAX_IMAGE_PATH, O_RDONLY, 0);		// wimax mode
	}

	if(fp)
	{
		if (g_stWiMAXImage.pImage == NULL)	// check already allocated
		{
			g_stWiMAXImage.pImage = (char *) vmalloc(MAX_WIMAXFW_SIZE);

			if(!g_stWiMAXImage.pImage)
			{
				DumpDebug(HARDWARE, "Error: Memory alloc failure");
				klib_fclose(fp);
				return STATUS_UNSUCCESSFUL;
			}
		}
		
		memset(g_stWiMAXImage.pImage, 0, MAX_WIMAXFW_SIZE);
		read_size = klib_flen_fcopy(g_stWiMAXImage.pImage, MAX_WIMAXFW_SIZE, fp);

		g_stWiMAXImage.uiSize = read_size;
		g_stWiMAXImage.uiWorkAddress = CMC730_WIBRO_ADDRESS;
		g_stWiMAXImage.uiOffset = 0;
		g_stWiMAXImage.buforder = buforder;

		klib_fclose(fp);
	}
	else {
		DumpDebug(HARDWARE, "Error: WiMAX image file open failed");
		return STATUS_UNSUCCESSFUL;
	}

	return STATUS_SUCCESS;
}
开发者ID:AproSamurai,项目名称:Arcturus,代码行数:47,代码来源:download.c

示例12: hwStart

INT hwStart(MINIPORT_ADAPTER *Adapter)
{
	ENTER;

	if(LoadWiMaxImage())
			return STATUS_UNSUCCESSFUL;
	
	Adapter->WibroStatus = WIBRO_STATE_READY;
	Adapter->IPRefreshing = FALSE;
	Adapter->bFWDNEndFlag = FALSE;
	
	if(Adapter->DownloadMode)
	{
//		wimax_download_start_time = jiffies;
		sdio_claim_host(Adapter->func);
		SendCmdPacket(Adapter, MSG_DRIVER_OK_REQ);
		sdio_release_host(Adapter->func);
		switch( wait_event_interruptible_timeout(Adapter->hFWDNEndEvent, (Adapter->bFWDNEndFlag == TRUE), msecs_to_jiffies(FWDOWNLOAD_TIMEOUT*wimax_timeout_multiplier) ) ) 
		{
			// timeout
			case 0:
				Adapter->bHaltPending = TRUE;
				DumpDebug(HARDWARE, "Error hwStart :  F/W Download timeout failed");
				return STATUS_UNSUCCESSFUL;
			
			// Interrupted by signal
			case -ERESTARTSYS:
				DumpDebug(HARDWARE, "Error hwStart :  -ERESTARTSYS retry");
				return STATUS_UNSUCCESSFUL;

			// normal condition check	
			default:
				if (Adapter->SurpriseRemoval == TRUE || Adapter->bHaltPending == TRUE)
				{							
					DumpDebug(HARDWARE, "Error hwStart :  F/W Download surprise removed");
					return STATUS_UNSUCCESSFUL;
				}
				DumpDebug(HARDWARE, "hwStart :  F/W Download Complete");
				break;
		}
		Adapter->DownloadMode = FALSE;
	}

	LEAVE;
	return STATUS_SUCCESS;
}
开发者ID:Silvist,项目名称:kernel-R910,代码行数:46,代码来源:hardware.c

示例13: proc_read_dump

static int proc_read_dump(char *page, char **start, off_t off, int count, int *eof, void *data)
{
	DumpDebug("CONTROL_IOCTL_WIMAX_CHECK_CAL");
	gpio_wimax_poweroff();

	//WIMAX_Check_Cal();
	
	return 0;
}
开发者ID:Silvist,项目名称:kernel-R910,代码行数:9,代码来源:wimaxproc.c

示例14: DumpMemConfig

void DumpMemConfig(FRConfig * Config, const char * Conf)
{
	FILE * ConfigFile = fopen(Conf,"w");
	DumpDebug(&Config->Debug,ConfigFile);
	DumpPreferences(&Config->Preferences,ConfigFile);
	DumpSound(&Config->Sound,ConfigFile);
	DumpSystem(&Config->System,ConfigFile);
	fclose(ConfigFile);
}
开发者ID:grepwood,项目名称:FreeRadical,代码行数:9,代码来源:config.c

示例15: WimaxMode

int	WimaxMode(void)
{
	struct file *fp;
	int mode = -1;

	fp = klib_fopen("/proc/wmxmode/mode", O_RDONLY, 0);
	if(fp != NULL) 
	{
		mode = klib_fgetc(fp);
		DumpDebug(HARDWARE, "Mode = %d", mode);
		klib_fclose(fp);
	}
	else
	{
		DumpDebug(HARDWARE, "Mode access failed!!!");
	}
	return mode;
}
开发者ID:AproSamurai,项目名称:Arcturus,代码行数:18,代码来源:download.c


注:本文中的DumpDebug函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。