当前位置: 首页>>代码示例>>C++>>正文

C++ DEVCB_INPUT_PORT函数代码示例

本文整理汇总了C++中DEVCB_INPUT_PORT函数的典型用法代码示例。如果您正苦于以下问题：C++ DEVCB_INPUT_PORT函数的具体用法？C++ DEVCB_INPUT_PORT怎么用？C++ DEVCB_INPUT_PORT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了DEVCB_INPUT_PORT函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: GFXDECODE_START

/* Graphics Decode Information */

static GFXDECODE_START( aquarius )
	GFXDECODE_ENTRY( "gfx1", 0x0000, aquarius_charlayout, 0, 256 )
GFXDECODE_END


/***************************************************************************
    MACHINE DRIVERS
***************************************************************************/

static const ay8910_interface aquarius_ay8910_interface =
{
	AY8910_LEGACY_OUTPUT,
	AY8910_DEFAULT_LOADS,
	DEVCB_INPUT_PORT("RIGHT"),
	DEVCB_INPUT_PORT("LEFT"),
	DEVCB_NULL,
	DEVCB_NULL
};

static const cassette_config aquarius_cassette_config =
{
	cassette_default_formats,
	NULL,
	(cassette_state)(CASSETTE_STOPPED | CASSETTE_MOTOR_ENABLED | CASSETTE_SPEAKER_MUTED),
	NULL
};

static MACHINE_CONFIG_START( aquarius, aquarius_state )
	/* basic machine hardware */
开发者ID:cdenix，项目名称:psmame，代码行数:31，代码来源:aquarius.c

示例2: GFXDECODE_START

	{ 8, 12, 0, 4 },
	{ 3, 2, 1, 0, 19, 18, 17, 16},
	{ 0*32, 1*32, 2*32, 3*32, 4*32, 5*32, 6*32, 7*32 },
	8*8*4
};
#endif

static GFXDECODE_START( dfruit )
	GFXDECODE_ENTRY( "gfx1", 0, bg2_layout, 0, 16 )
	GFXDECODE_ENTRY( "gfx1", 0, sp2_layout, 0, 16 )
	//GFXDECODE_ENTRY( NULL,           0, char_layout,  0, 16 )  // Ram-based
GFXDECODE_END

static I8255A_INTERFACE( ppi8255_intf )
{
	DEVCB_INPUT_PORT("IN0"),						/* Port A read */
	DEVCB_NULL,			/* Port A write */
	DEVCB_INPUT_PORT("IN1"),		/* Port B read */
	DEVCB_NULL,						/* Port B write */
	DEVCB_INPUT_PORT("IN2"),			/* Port C read */
	DEVCB_NULL						/* Port C write */
};

TIMER_DEVICE_CALLBACK_MEMBER(dfruit_state::dfruit_irq_scanline)
{
	int scanline = param;

	if (scanline == 240 && (m_irq_enable & 4))
	{
		m_maincpu->set_input_line_and_vector(0, HOLD_LINE, m_irq_vector[2]);
	}
开发者ID:coinhelper，项目名称:jsmess，代码行数:31，代码来源:dfruit.c

示例3: GFXDECODE_ENTRY

	GFXDECODE_ENTRY( "gfx1", 0x0000, charlayout,   0, 64 )
	GFXDECODE_ENTRY( "gfx1", 0x0000, spritelayout, 0, 64 )
GFXDECODE_END


/*************************************
 *
 *  Sound interfaces
 *
 *************************************/

static const ay8910_interface ay8912_interface_1 =
{
	AY8910_LEGACY_OUTPUT,
	AY8910_DEFAULT_LOADS,
	DEVCB_INPUT_PORT("SYSTEM"),
	DEVCB_NULL,
	DEVCB_NULL,
	DEVCB_NULL
};

static const ay8910_interface ay8912_interface_2 =
{
	AY8910_LEGACY_OUTPUT,
	AY8910_DEFAULT_LOADS,
	DEVCB_INPUT_PORT("INPUTS"),
	DEVCB_NULL,
	DEVCB_NULL,
	DEVCB_NULL
};
开发者ID:LibXenonProject，项目名称:mame-lx，代码行数:30，代码来源:ambush.c

示例4: DEVCB_INPUT_PORT

	BZONEADJ
INPUT_PORTS_END



/*************************************
 *
 *  Sound interfaces
 *
 *************************************/

static const pokey_interface bzone_pokey_interface =
{
	{ DEVCB_NULL },
	DEVCB_INPUT_PORT("IN3")
};


static const pokey_interface redbaron_pokey_interface =
{
	{ DEVCB_NULL },
	DEVCB_HANDLER(redbaron_joy_r)
};



/*************************************
 *
 *  Machine driver
 *
开发者ID:nitrologic，项目名称:emu，代码行数:30，代码来源:bzone.c

示例5: PORT_BIT

	PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON6        ) PORT_PLAYER(1)
	PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON4        ) PORT_PLAYER(2)
	PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON5        ) PORT_PLAYER(2)
	PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON6        ) PORT_PLAYER(2)
INPUT_PORTS_END


/***************************************************************************

    Machine Drivers

***************************************************************************/

static I8255A_INTERFACE( lordgun_ppi8255_0_intf )
{
	DEVCB_INPUT_PORT("DIP"),            /* Port A read */
	DEVCB_DRIVER_MEMBER(lordgun_state,fake_w),              /* Port A write */
	DEVCB_NULL,                         /* Port B read */
	DEVCB_DRIVER_MEMBER(lordgun_state,lordgun_eeprom_w),    /* Port B write */
	DEVCB_INPUT_PORT("SERVICE"),        /* Port C read */
	DEVCB_DRIVER_MEMBER(lordgun_state,fake2_w)              /* Port C write */
};

static I8255A_INTERFACE( lordgun_ppi8255_1_intf )
{
	DEVCB_INPUT_PORT("START1"),         /* Port A read */
	DEVCB_DRIVER_MEMBER(lordgun_state,fake_w),              /* Port A write */
	DEVCB_INPUT_PORT("START2"),         /* Port B read */
	DEVCB_DRIVER_MEMBER(lordgun_state,fake_w),              /* Port B write */
	DEVCB_INPUT_PORT("COIN"),           /* Port C read */
	DEVCB_DRIVER_MEMBER(lordgun_state,fake_w)               /* Port C write */
开发者ID:jiangzhonghui，项目名称:mame，代码行数:31，代码来源:lordgun.c

示例6: GFXDECODE_START

static GFXDECODE_START( runaway )
	GFXDECODE_ENTRY( "gfx1", 0x000, runaway_tile_layout,   0, 1 )
	GFXDECODE_ENTRY( "gfx1", 0x800, runaway_sprite_layout, 8, 1 )
GFXDECODE_END


static GFXDECODE_START( qwak )
	GFXDECODE_ENTRY( "gfx1", 0x800, qwak_tile_layout,   0, 1 )
	GFXDECODE_ENTRY( "gfx1", 0x000, qwak_sprite_layout, 0, 1 )
GFXDECODE_END


static const pokey_interface pokey_interface_1 =
{
	{ DEVCB_NULL },
	DEVCB_INPUT_PORT("6008")
};

static const pokey_interface pokey_interface_2 =
{
	{
		DEVCB_HANDLER(runaway_pot_r),
		DEVCB_HANDLER(runaway_pot_r),
		DEVCB_HANDLER(runaway_pot_r),
		DEVCB_HANDLER(runaway_pot_r),
		DEVCB_HANDLER(runaway_pot_r),
		DEVCB_HANDLER(runaway_pot_r),
		DEVCB_HANDLER(runaway_pot_r),
		DEVCB_HANDLER(runaway_pot_r)
	}
};
开发者ID:AltimorTASDK，项目名称:shmupmametgm，代码行数:31，代码来源:runaway.c

示例7: PORT_BIT

	PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) PORT_8WAY
	PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2)
	PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) // used to get test mode
INPUT_PORTS_END


INTERRUPT_GEN_MEMBER(hotblock_state::hotblocks_irq)/* right? */
{
	device.execute().set_input_line(INPUT_LINE_NMI, PULSE_LINE);
}

static const ay8910_interface ay8910_config =
{
	AY8910_LEGACY_OUTPUT,
	AY8910_DEFAULT_LOADS,
	DEVCB_INPUT_PORT("P1"),
	DEVCB_INPUT_PORT("P2"),
	DEVCB_NULL,
	DEVCB_NULL
};


static MACHINE_CONFIG_START( hotblock, hotblock_state )

	/* basic machine hardware */
	MCFG_CPU_ADD("maincpu", I8088, 10000000)
	MCFG_CPU_PROGRAM_MAP(hotblock_map)
	MCFG_CPU_IO_MAP(hotblock_io)
	MCFG_CPU_VBLANK_INT_DRIVER("screen", hotblock_state,  hotblocks_irq)

	/* video hardware */
开发者ID:Ilgrim，项目名称:MAMEHub，代码行数:31，代码来源:hotblock.c

示例8: WRITE8_MEMBER

}

WRITE8_MEMBER(toypop_state::out_coin1)
{
	coin_counter_w(machine(), 1, ~data & 1);
}

WRITE8_MEMBER(toypop_state::flip)
{
	flip_screen_set(data & 1);
}

/* chip #0: player inputs, buttons, coins */
static const namcoio_interface intf0_coin =
{
	{ DEVCB_INPUT_PORT("COINS"), DEVCB_INPUT_PORT("P1_RIGHT"), DEVCB_INPUT_PORT("P2_RIGHT"), DEVCB_INPUT_PORT("BUTTONS") },	/* port read handlers */
	{ DEVCB_DRIVER_MEMBER(toypop_state,out_coin0), DEVCB_DRIVER_MEMBER(toypop_state,out_coin1) },		/* port write handlers */
	NULL	/* device */
};
static const namcoio_interface intf0 =
{
	{ DEVCB_INPUT_PORT("COINS"), DEVCB_INPUT_PORT("P1_RIGHT"), DEVCB_INPUT_PORT("P2_RIGHT"), DEVCB_INPUT_PORT("BUTTONS") },	/* port read handlers */
	{ DEVCB_NULL, DEVCB_NULL },					/* port write handlers */
	NULL	/* device */
};

/* chip #1: dip switches */
static const namcoio_interface intf1 =
{
	{ DEVCB_DRIVER_MEMBER(toypop_state,dipA_h), DEVCB_DRIVER_MEMBER(toypop_state,dipB_l), DEVCB_DRIVER_MEMBER(toypop_state,dipB_h), DEVCB_DRIVER_MEMBER(toypop_state,dipA_l) },	/* port read handlers */
	{ DEVCB_DRIVER_MEMBER(toypop_state,flip), DEVCB_NULL },						/* port write handlers */
开发者ID:kleopatra999，项目名称:mess-svn，代码行数:31，代码来源:toypop.c

示例9: irq_handler

                                Sand Scorpion
***************************************************************************/

/* YM3014B + YM2203C */

static void irq_handler(device_t *device, int irq)
{
	cputag_set_input_line(device->machine(), "audiocpu", 0, irq ? ASSERT_LINE : CLEAR_LINE);
}

static const ym2203_interface ym2203_intf_sandscrp =
{
	{
		AY8910_LEGACY_OUTPUT,
		AY8910_DEFAULT_LOADS,
		DEVCB_INPUT_PORT("DSW1"), /* Port A Read */
		DEVCB_INPUT_PORT("DSW2"), /* Port B Read */
		DEVCB_NULL,	/* Port A Write */
		DEVCB_NULL,	/* Port B Write */
	},
	irq_handler	/* IRQ handler */
};


static const kaneko_pandora_interface sandscrp_pandora_config =
{
	"screen",	/* screen tag */
	0,	/* gfx_region */
	0, 0	/* x_offs, y_offs */
};
开发者ID:risico，项目名称:jsmess，代码行数:30，代码来源:sandscrp.c

示例10: DEVCB_INPUT_PORT

    PIA 5 = U7: (never actually used, mapped to $2000 on the sound CPU)
        port A = unused
        port B = sound CPU to TMS5220 communication
        CA1 = interrupt signal from TMS5220
        CA2 = write signal to TMS5220
        CB1 = ready signal from TMS5220
        CB2 = read signal to TMS5220
        IRQA = /SINT2 signal
        IRQB = /SINT2 signal

***************************************************************************/

const pia6821_interface qix_pia_0_intf =
{
	DEVCB_INPUT_PORT("P1"),		/* port A in */
	DEVCB_INPUT_PORT("COIN"),	/* port B in */
	DEVCB_NULL,		/* line CA1 in */
	DEVCB_NULL,		/* line CB1 in */
	DEVCB_NULL,		/* line CA2 in */
	DEVCB_NULL,		/* line CB2 in */
	DEVCB_NULL,		/* port A out */
	DEVCB_NULL,		/* port B out */
	DEVCB_NULL,		/* line CA2 out */
	DEVCB_NULL,		/* port CB2 out */
	DEVCB_NULL,		/* IRQA */
	DEVCB_NULL		/* IRQB */
};

const pia6821_interface qix_pia_1_intf =
{
开发者ID:j4y4r，项目名称:j4ymame，代码行数:30，代码来源:qix.c

示例11: AM_RANGE

	AM_RANGE(0x880a, 0x880a) AM_READ_PORT("SYSTEM")
	AM_RANGE(0x880b, 0x880b) AM_READ_PORT("P2")
	AM_RANGE(0x880c, 0x880c) AM_READWRITE(chaknpop_gfxmode_r, chaknpop_gfxmode_w)
	AM_RANGE(0x880d, 0x880d) AM_WRITE(coinlock_w)												// coin lock out
	AM_RANGE(0x9000, 0x93ff) AM_RAM_WRITE(chaknpop_txram_w) AM_BASE_MEMBER(chaknpop_state, tx_ram)			// TX tilemap
	AM_RANGE(0x9800, 0x983f) AM_RAM_WRITE(chaknpop_attrram_w) AM_BASE_MEMBER(chaknpop_state, attr_ram)		// Color attribute
	AM_RANGE(0x9840, 0x98ff) AM_RAM AM_BASE_SIZE_MEMBER(chaknpop_state, spr_ram, spr_ram_size)	// sprite
	AM_RANGE(0xa000, 0xbfff) AM_ROM
	AM_RANGE(0xc000, 0xffff) AM_RAMBANK("bank1")														// bitmap plane 1-4
ADDRESS_MAP_END

static const ay8910_interface ay8910_interface_1 =
{
	AY8910_LEGACY_OUTPUT,
	AY8910_DEFAULT_LOADS,
	DEVCB_INPUT_PORT("DSWA"),		// DSW A
	DEVCB_INPUT_PORT("DSWB"),		// DSW B
	DEVCB_NULL,
	DEVCB_NULL
};

static const ay8910_interface ay8910_interface_2 =
{
	AY8910_LEGACY_OUTPUT,
	AY8910_DEFAULT_LOADS,
	DEVCB_NULL,
	DEVCB_NULL,
	DEVCB_HANDLER(unknown_port_1_w),	// ??
	DEVCB_HANDLER(unknown_port_2_w)	// ??
};
开发者ID:DarrenBranford，项目名称:MAME4iOS，代码行数:30，代码来源:chaknpop.c

示例12: MACHINE_START

static MACHINE_START(merit)
{
	slotcarn_state *state = machine.driver_data<slotcarn_state>();
	state->m_ram_palette = auto_alloc_array(machine, UINT8, RAM_PALETTE_SIZE);
	state_save_register_global_pointer(machine, state->m_ram_palette, RAM_PALETTE_SIZE);
}


/***************************************
*       PPI 8255 (x3) Interfaces       *
***************************************/

static const ppi8255_interface scarn_ppi8255_intf[3] =
{
	{	/* A, B & C set as input */
		DEVCB_INPUT_PORT("IN0"),	/* Port A read */
		DEVCB_INPUT_PORT("IN1"),	/* Port B read */
		DEVCB_INPUT_PORT("IN2"),	/* Port C read */
		DEVCB_NULL,					/* Port A write */
		DEVCB_NULL,					/* Port B write */
		DEVCB_NULL					/* Port C write */
	},
	{	/* A set as input */
		DEVCB_INPUT_PORT("DSW1"),	/* Port A read */
		DEVCB_NULL,					/* Port B read */
		DEVCB_NULL,					/* Port C read */
		DEVCB_NULL,					/* Port A write */
		DEVCB_NULL,					/* Port B write */
		DEVCB_NULL					/* Port C write */
	},
	{	/* A & B set as input */
开发者ID:vikke，项目名称:mame_0145，代码行数:31，代码来源:slotcarn.c

示例13: PORT_BIT

	PORT_BIT( 0xf0, IP_ACTIVE_LOW, IPT_UNUSED )
INPUT_PORTS_END


/***************************************************************************

  Machine Config

***************************************************************************/

static I8255A_INTERFACE( ppi8255_0_intf )
{
	// $4008 - always $83 (PPI mode 0, ports B & lower C as input)
	DEVCB_NULL,                         /* Port A read */
	DEVCB_DRIVER_MEMBER(kungfur_state,kungfur_output_w),    /* Port A write */
	DEVCB_INPUT_PORT("IN0"),            /* Port B read */
	DEVCB_NULL,                         /* Port B write */
	DEVCB_INPUT_PORT("IN1"),            /* Port C read */
	DEVCB_DRIVER_MEMBER(kungfur_state,kungfur_control_w)    /* Port C write */
};

static I8255A_INTERFACE( ppi8255_1_intf )
{
	// $400c - always $80 (PPI mode 0, all ports as output)
	DEVCB_NULL,                         /* Port A read */
	DEVCB_DRIVER_MEMBER(kungfur_state,kungfur_latch1_w),    /* Port A write */
	DEVCB_NULL,                         /* Port B read */
	DEVCB_DRIVER_MEMBER(kungfur_state,kungfur_latch2_w),    /* Port B write */
	DEVCB_NULL,                         /* Port C read */
	DEVCB_DRIVER_MEMBER(kungfur_state,kungfur_latch3_w)     /* Port C write */
};
开发者ID:CJBass，项目名称:mame2013-libretro，代码行数:31，代码来源:kungfur.c

示例14: set_led_status

{
	set_led_status(machine(), 0, data & 1);
	set_led_status(machine(), 1, data & 2);
	coin_lockout_global_w(machine(), data & 4);
	coin_counter_w(machine(), 0, ~data & 8);
}

WRITE8_MEMBER(gaplus_state::out_lamps1)
{
	coin_counter_w(machine(), 1, ~data & 1);
}

/* chip #0: player inputs, buttons, coins */
static const namcoio_interface intf0 =
{
	{ DEVCB_INPUT_PORT("COINS"), DEVCB_INPUT_PORT("P1"), DEVCB_INPUT_PORT("P2"), DEVCB_INPUT_PORT("BUTTONS") },	/* port read handlers */
	{ DEVCB_NULL, DEVCB_NULL },		/* port write handlers */
	NULL	/* device */
};

static const namcoio_interface intf0_lamps =
{
	{ DEVCB_INPUT_PORT("COINS"), DEVCB_INPUT_PORT("P1"), DEVCB_INPUT_PORT("P2"), DEVCB_INPUT_PORT("BUTTONS") },	/* port read handlers */
	{ DEVCB_DRIVER_MEMBER(gaplus_state,out_lamps0), DEVCB_DRIVER_MEMBER(gaplus_state,out_lamps1) },		/* port write handlers */
	NULL	/* device */
};

/* chip #1: dip switches */
static const namcoio_interface intf1 =
{
	{ DEVCB_INPUT_PORT("DSWA_HIGH"), DEVCB_INPUT_PORT("DSWB_LOW"), DEVCB_INPUT_PORT("DSWB_HIGH"), DEVCB_INPUT_PORT("DSWA_LOW") },	/* port read handlers */
开发者ID:broftkd，项目名称:mess-svn，代码行数:31，代码来源:gaplus.c

示例15: WRITE8_MEMBER

WRITE8_MEMBER(albazg_state::yumefuda_output_w)
{
    coin_counter_w(machine(), 0, ~data & 4);
    coin_counter_w(machine(), 1, ~data & 2);
    coin_lockout_global_w(machine(), data & 1);
    //data & 0x10 hopper-c (active LOW)
    //data & 0x08 divider (active HIGH)
    flip_screen_set(~data & 0x20);
}

static const ay8910_interface ay8910_config =
{
    AY8910_LEGACY_OUTPUT,
    AY8910_DEFAULT_LOADS,
    DEVCB_INPUT_PORT("DSW1"),
    DEVCB_INPUT_PORT("DSW2"),
    DEVCB_DRIVER_MEMBER(albazg_state,yumefuda_output_w),
    DEVCB_NULL
};

static const mc6845_interface mc6845_intf =
{
    "screen",	/* screen we are acting on */
    8,			/* number of pixels per video memory address */
    NULL,		/* before pixel update callback */
    NULL,		/* row update callback */
    NULL,		/* after pixel update callback */
    DEVCB_NULL,	/* callback for display state changes */
    DEVCB_NULL,	/* callback for cursor state changes */
    DEVCB_NULL,	/* HSYNC callback */
开发者ID:gustavosmk，项目名称:groovyarcade.groovymame，代码行数:30，代码来源:albazg.c


注：本文中的DEVCB_INPUT_PORT函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。