C++ CS_GetEntry函数代码示例

void CS_DelCodeAfter (CodeSeg* S, unsigned Last)
/* Delete all entries including the given one */
{
    /* Get the number of entries in this segment */
    unsigned Count = CS_GetEntryCount (S);

    /* First pass: Delete all references to labels. If the reference count
     * for a label drops to zero, delete it.
     */
    unsigned C = Count;
    while (Last < C--) {

       	/* Get the next entry */
       	CodeEntry* E = CS_GetEntry (S, C);

       	/* Check if this entry has a label reference */
       	if (E->JumpTo) {
       	    /* If the label is a label in the label pool and this is the last
       	     * reference to the label, remove the label from the pool.
       	     */
       	    CodeLabel* L = E->JumpTo;
       	    int Index = CollIndex (&S->Labels, L);
       	    if (Index >= 0 && CollCount (&L->JumpFrom) == 1) {
       	     	/* Delete it from the pool */
       	     	CollDelete (&S->Labels, Index);
       	    }

	    /* Remove the reference to the label */
	    CS_RemoveLabelRef (S, E);
	}

    }

    /* Second pass: Delete the instructions. If a label attached to an
     * instruction still has references, it must be references from outside
     * the deleted area. Don't delete the label in this case, just make it
     * ownerless and move it to the label pool.
     */
    C = Count;
    while (Last < C--) {

    	/* Get the next entry */
    	CodeEntry* E = CS_GetEntry (S, C);

    	/* Check if this entry has a label attached */
    	if (CE_HasLabel (E)) {
	    /* Move the labels to the pool and clear the owner pointer */
	    CS_MoveLabelsToPool (S, E);
	}

	/* Delete the pointer to the entry */
	CollDelete (&S->Entries, C);

	/* Delete the entry itself */
	FreeCodeEntry (E);
    }
}

void CS_DelEntry (CodeSeg* S, unsigned Index)
/* Delete an entry from the code segment. This includes moving any associated
 * labels, removing references to labels and even removing the referenced labels
 * if the reference count drops to zero.
 * Note: Labels are moved forward if possible, that is, they are moved to the
 * next insn (not the preceeding one).
 */
{
    /* Get the code entry for the given index */
    CodeEntry* E = CS_GetEntry (S, Index);

    /* If the entry has a labels, we have to move this label to the next insn.
     * If there is no next insn, move the label into the code segement label
     * pool. The operation is further complicated by the fact that the next
     * insn may already have a label. In that case change all reference to
     * this label and delete the label instead of moving it.
     */
    unsigned Count = CE_GetLabelCount (E);
    if (Count > 0) {

     	/* The instruction has labels attached. Check if there is a next
     	 * instruction.
     	 */
     	if (Index == CS_GetEntryCount (S)-1) {

     	    /* No next instruction, move to the codeseg label pool */
     	    CS_MoveLabelsToPool (S, E);

     	} else {

     	    /* There is a next insn, get it */
     	    CodeEntry* N = CS_GetEntry (S, Index+1);

     	    /* Move labels to the next entry */
     	    CS_MoveLabels (S, E, N);

     	}
    }

    /* If this insn references a label, remove the reference. And, if the
     * the reference count for this label drops to zero, remove this label.
     */
    if (E->JumpTo) {
       	/* Remove the reference */
       	CS_RemoveLabelRef (S, E);
    }

    /* Delete the pointer to the insn */
    CollDelete (&S->Entries, Index);

    /* Delete the instruction itself */
    FreeCodeEntry (E);
}

void CS_ResetMarks (CodeSeg* S, unsigned First, unsigned Last)
/* Remove all user marks from the entries in the given range */
{
    while (First <= Last) {
        CE_ResetMark (CS_GetEntry (S, First++));
    }
}

unsigned OptBNegAX1 (CodeSeg* S)
/* On a call to bnegax, if X is zero, the result depends only on the value in
 * A, so change the call to a call to bnega. This will get further optimized
 * later if possible.
 */
{
    unsigned Changes = 0;
    unsigned I;

    /* Walk over the entries */
    I = 0;
    while (I < CS_GetEntryCount (S)) {

        /* Get next entry */
        CodeEntry* E = CS_GetEntry (S, I);

        /* Check if this is a call to bnegax, and if X is known and zero */
        if (E->RI->In.RegX == 0 && CE_IsCallTo (E, "bnegax")) {

            CodeEntry* X = NewCodeEntry (OP65_JSR, AM65_ABS, "bnega", 0, E->LI);
            CS_InsertEntry (S, X, I+1);
            CS_DelEntry (S, I);

            /* We had changes */
            ++Changes;
        }

        /* Next entry */
        ++I;

    }

    /* Return the number of changes made */
    return Changes;
}

void CS_MoveEntries (CodeSeg* S, unsigned Start, unsigned Count, unsigned NewPos)
/* Move a range of entries from one position to another. Start is the index
 * of the first entry to move, Count is the number of entries and NewPos is
 * the index of the target entry. The entry with the index Start will later
 * have the index NewPos. All entries with indices NewPos and above are
 * moved to higher indices. If the code block is moved to the end of the
 * current code, and if pending labels exist, these labels will get attached
 * to the first instruction of the moved block (the first one after the
 * current code end)
 */
{
    /* Transparently handle an empty range */
    if (Count == 0) {
        return;
    }

    /* If NewPos is at the end of the code segment, move any labels from the
     * label pool to the first instruction of the moved range.
     */
    if (NewPos == CS_GetEntryCount (S)) {
	CS_MoveLabelsToEntry (S, CS_GetEntry (S, Start));
    }

    /* Move the code block to the destination */
    CollMoveMultiple (&S->Entries, Start, Count, NewPos);
}

unsigned GetRegInfo (struct CodeSeg* S, unsigned Index, unsigned Wanted)
/* Determine register usage information for the instructions starting at the
** given index.
*/
{
    CodeEntry*      E;
    Collection      Visited;    /* Visited entries */
    unsigned        R;

    /* Get the code entry for the given index */
    if (Index >= CS_GetEntryCount (S)) {
        /* There is no such code entry */
        return REG_NONE;
    }
    E = CS_GetEntry (S, Index);

    /* Initialize the data structure used to collection information */
    InitCollection (&Visited);

    /* Call the recursive subfunction */
    R = GetRegInfo1 (S, E, Index, &Visited, REG_NONE, REG_NONE, Wanted);

    /* Delete the line collection */
    DoneCollection (&Visited);

    /* Return the registers used */
    return R;
}

unsigned OptCmp6 (CodeSeg* S)
/* Search for calls to compare subroutines followed by a conditional branch
 * and replace them by cheaper versions, since the branch means that the
 * boolean value returned by these routines is not needed (we may also check
 * that explicitly, but for the current code generator it is always true).
 */
{
    unsigned Changes = 0;

    /* Walk over the entries */
    unsigned I = 0;
    while (I < CS_GetEntryCount (S)) {

	CodeEntry* N;
	cmp_t Cond;

      	/* Get next entry */
       	CodeEntry* E = CS_GetEntry (S, I);

     	/* Check for the sequence */
       	if (E->OPC == OP65_JSR 	    		        &&
	    (Cond = FindTosCmpCond (E->Arg)) != CMP_INV	&&
	    (N = CS_GetNextEntry (S, I)) != 0           &&
	    (N->Info & OF_ZBRA) != 0                    &&
       	    !CE_HasLabel (N)) {

       	    /* The tos... functions will return a boolean value in a/x and
	     * the Z flag says if this value is zero or not. We will call
	     * a cheaper subroutine instead, one that does not return a
	     * boolean value but only valid flags. Note: jeq jumps if
	     * the condition is not met, jne jumps if the condition is met.
     	     * Invert the code if we jump on condition not met.
    	     */
       	    if (GetBranchCond (N->OPC) == BC_EQ) {
	       	/* Jumps if condition false, invert condition */
	       	Cond = CmpInvertTab [Cond];
  	    }

	    /* Replace the subroutine call. */
	    E = NewCodeEntry (OP65_JSR, AM65_ABS, "tosicmp", 0, E->LI);
	    CS_InsertEntry (S, E, I+1);
	    CS_DelEntry (S, I);

	    /* Replace the conditional branch */
	    ReplaceCmp (S, I+1, Cond);

	    /* Remember, we had changes */
	    ++Changes;

	}

  	/* Next entry */
	++I;

    }

    /* Return the number of changes made */
    return Changes;
}

unsigned OptShift2(CodeSeg* S)
/* A call to the asrax1 routines may get replaced by something simpler, if
 * X is not used later:
 *
 *      cmp     #$80
 *      ror     a
 *
 */
{
    unsigned Changes = 0;
    unsigned I;

    /* Walk over the entries */
    I = 0;
    while (I < CS_GetEntryCount (S)) {

        unsigned Shift;
        unsigned Count;

      	/* Get next entry */
       	CodeEntry* E = CS_GetEntry (S, I);

     	/* Check for the sequence */
	if (E->OPC == OP65_JSR                          &&
            (Shift = GetShift (E->Arg)) != SHIFT_NONE   &&
            SHIFT_TYPE (Shift) == SHIFT_TYPE_ASR        &&
            (Count = SHIFT_COUNT (Shift)) > 0           &&
            Count * 100 <= S->CodeSizeFactor    &&
            !RegXUsed (S, I+1)) {

            CodeEntry* X;
            unsigned J = I+1;

            /* Generate the replacement sequence */
            while (Count--) {
                /* cmp #$80 */
                X = NewCodeEntry (OP65_CMP, AM65_IMM, "$80", 0, E->LI);
                CS_InsertEntry (S, X, J++);

                /* ror a */
                X = NewCodeEntry (OP65_ROR, AM65_ACC, "a", 0, E->LI);
                CS_InsertEntry (S, X, J++);
            }

            /* Delete the call to asrax */
            CS_DelEntry (S, I);

            /* Remember, we had changes */
            ++Changes;
    	}

    	/* Next entry */
    	++I;

    }

    /* Return the number of changes made */
    return Changes;
}

unsigned OptPush2 (CodeSeg* S)
/* A sequence
 *
 *     jsr     ldaxidx
 *     jsr     pushax
 *
 * may get replaced by
 *
 *     jsr     pushwidx
 *
 */
{
    unsigned I;
    unsigned Changes = 0;

    /* Generate register info */
    CS_GenRegInfo (S);

    /* Walk over the entries */
    I = 0;
    while (I < CS_GetEntryCount (S)) {

     	CodeEntry* L[2];

      	/* Get next entry */
       	L[0] = CS_GetEntry (S, I);

     	/* Check for the sequence */
       	if (CE_IsCallTo (L[0], "ldaxidx")               &&
            (L[1] = CS_GetNextEntry (S, I)) != 0        &&
            !CE_HasLabel (L[1])                         &&
       	    CE_IsCallTo (L[1], "pushax")) {

	    /* Insert new code behind the pushax */
	    CodeEntry* X;

	    /* jsr pushwidx */
	    X = NewCodeEntry (OP65_JSR, AM65_ABS, "pushwidx", 0, L[1]->LI);
	    CS_InsertEntry (S, X, I+2);

	    /* Delete the old code */
	    CS_DelEntries (S, I, 2);

	    /* Remember, we had changes */
	    ++Changes;

	}

	/* Next entry */
	++I;

    }

    /* Free the register info */
    CS_FreeRegInfo (S);

    /* Return the number of changes made */
    return Changes;
}

void CS_FreeRegInfo (CodeSeg* S)
/* Free register infos for all instructions */
{
    unsigned I;
    for (I = 0; I < CS_GetEntryCount (S); ++I) {
        CE_FreeRegInfo (CS_GetEntry(S, I));
    }
}

unsigned OptBNegA2 (CodeSeg* S)
/* Check for
 *
 *      lda     ..
 *      jsr     bnega
 *      jeq/jne ..
 *
 * Adjust the conditional branch and remove the call to the subroutine.
 */
{
    unsigned Changes = 0;

    /* Walk over the entries */
    unsigned I = 0;
    while (I < CS_GetEntryCount (S)) {

        CodeEntry* L[2];

        /* Get next entry */
        CodeEntry* E = CS_GetEntry (S, I);

        /* Check for the sequence */
        if ((E->OPC == OP65_ADC ||
             E->OPC == OP65_AND ||
             E->OPC == OP65_DEA ||
             E->OPC == OP65_EOR ||
             E->OPC == OP65_INA ||
             E->OPC == OP65_LDA ||
             E->OPC == OP65_ORA ||
             E->OPC == OP65_PLA ||
             E->OPC == OP65_SBC ||
             E->OPC == OP65_TXA ||
             E->OPC == OP65_TYA)                &&
            CS_GetEntries (S, L, I+1, 2)        &&
            CE_IsCallTo (L[0], "bnega")         &&
            !CE_HasLabel (L[0])                 &&
            (L[1]->Info & OF_ZBRA) != 0         &&
            !CE_HasLabel (L[1])) {

            /* Invert the branch */
            CE_ReplaceOPC (L[1], GetInverseBranch (L[1]->OPC));

            /* Delete the subroutine call */
            CS_DelEntry (S, I+1);

            /* Remember, we had changes */
            ++Changes;

        }

        /* Next entry */
        ++I;

    }

    /* Return the number of changes made */
    return Changes;
}

unsigned OptBNegAX3 (CodeSeg* S)
/* Search for the sequence:
 *
 *      lda     xx
 *      ldx     yy
 *      jsr     bnegax
 *      jne/jeq ...
 *
 * and replace it by
 *
 *      lda     xx
 *      ora     xx+1
 *      jeq/jne ...
 */
{
    unsigned Changes = 0;

    /* Walk over the entries */
    unsigned I = 0;
    while (I < CS_GetEntryCount (S)) {

        CodeEntry* L[3];

        /* Get next entry */
        CodeEntry* E = CS_GetEntry (S, I);

        /* Check for the sequence */
        if (E->OPC == OP65_LDA                  &&
            CS_GetEntries (S, L, I+1, 3)        &&
            L[0]->OPC == OP65_LDX               &&
            !CE_HasLabel (L[0])                 &&
            CE_IsCallTo (L[1], "bnegax")        &&
            !CE_HasLabel (L[1])                 &&
            (L[2]->Info & OF_ZBRA) != 0         &&
            !CE_HasLabel (L[2])) {

            /* ldx --> ora */
            CE_ReplaceOPC (L[0], OP65_ORA);

            /* Invert the branch */
            CE_ReplaceOPC (L[2], GetInverseBranch (L[2]->OPC));

            /* Delete the subroutine call */
            CS_DelEntry (S, I+2);

            /* Remember, we had changes */
            ++Changes;

        }

        /* Next entry */
        ++I;

    }

    /* Return the number of changes made */
    return Changes;
}

unsigned OptCmp1 (CodeSeg* S)
/* Search for the sequence
 *
 *  	ldx	xx
 *  	stx	tmp1
 *  	ora	tmp1
 *
 * and replace it by
 *
 *  	ora	xx
 */
{
    unsigned Changes = 0;

    /* Walk over the entries */
    unsigned I = 0;
    while (I < CS_GetEntryCount (S)) {

	CodeEntry* L[3];

      	/* Get next entry */
       	L[0] = CS_GetEntry (S, I);

     	/* Check for the sequence */
       	if (L[0]->OPC == OP65_LDX               &&
	    !CS_RangeHasLabel (S, I+1, 2)       &&
	    CS_GetEntries (S, L+1, I+1, 2)	&&
       	    L[1]->OPC == OP65_STX	  	&&
	    strcmp (L[1]->Arg, "tmp1") == 0     &&
	    L[2]->OPC == OP65_ORA	    	&&
	    strcmp (L[2]->Arg, "tmp1") == 0) {

            CodeEntry* X;

	    /* Insert the ora instead */
            X = NewCodeEntry (OP65_ORA, L[0]->AM, L[0]->Arg, 0, L[0]->LI);
	    CS_InsertEntry (S, X, I);

	    /* Remove all other instructions */
	    CS_DelEntries (S, I+1, 3);

	    /* Remember, we had changes */
	    ++Changes;

	}

	/* Next entry */
	++I;

    }

    /* Return the number of changes made */
    return Changes;
}

unsigned OptStore4 (CodeSeg* S)
/* Search for the sequence
**
**      sta     xx
**      stx     yy
**      lda     xx
**      ldx     yy
**
** and remove the useless load, provided that the next insn doesn't use flags
** from the load.
*/
{
    unsigned Changes = 0;

    /* Walk over the entries */
    unsigned I = 0;
    while (I < CS_GetEntryCount (S)) {

        CodeEntry* L[5];

        /* Get next entry */
        L[0] = CS_GetEntry (S, I);

        /* Check for the sequence */
        if (L[0]->OPC == OP65_STA                           &&
            (L[0]->AM == AM65_ABS || L[0]->AM == AM65_ZP)   &&
            !CS_RangeHasLabel (S, I+1, 3)                   &&
            CS_GetEntries (S, L+1, I+1, 4)                  &&
            L[1]->OPC == OP65_STX                           &&
            L[1]->AM == L[0]->AM                            &&
            L[2]->OPC == OP65_LDA                           &&
            L[2]->AM == L[0]->AM                            &&
            L[3]->OPC == OP65_LDX                           &&
            L[3]->AM == L[1]->AM                            &&
            strcmp (L[0]->Arg, L[2]->Arg) == 0              &&
            strcmp (L[1]->Arg, L[3]->Arg) == 0              &&
            !CE_UseLoadFlags (L[4])) {

            /* Register has already the correct value, remove the loads */
            CS_DelEntries (S, I+2, 2);

            /* Remember, we had changes */
            ++Changes;

        }

        /* Next entry */
        ++I;

    }

    /* Return the number of changes made */
    return Changes;
}

unsigned OptBoolTrans (CodeSeg* S)
/* Try to remove the call to boolean transformer routines where the call is
 * not really needed.
 */
{
    unsigned Changes = 0;

    /* Walk over the entries */
    unsigned I = 0;
    while (I < CS_GetEntryCount (S)) {

	CodeEntry* N;
	cmp_t Cond;

      	/* Get next entry */
       	CodeEntry* E = CS_GetEntry (S, I);

	/* Check for a boolean transformer */
	if (E->OPC == OP65_JSR                           &&
	    (Cond = FindBoolCmpCond (E->Arg)) != CMP_INV &&
	    (N = CS_GetNextEntry (S, I)) != 0            &&
	    (N->Info & OF_ZBRA) != 0) {

	    /* Make the boolean transformer unnecessary by changing the
	     * the conditional jump to evaluate the condition flags that
	     * are set after the compare directly. Note: jeq jumps if
	     * the condition is not met, jne jumps if the condition is met.
     	     * Invert the code if we jump on condition not met.
	     */
       	    if (GetBranchCond (N->OPC) == BC_EQ) {
	       	/* Jumps if condition false, invert condition */
	       	Cond = CmpInvertTab [Cond];
  	    }

	    /* Check if we can replace the code by something better */
	    ReplaceCmp (S, I+1, Cond);

	    /* Remove the call to the bool transformer */
	    CS_DelEntry (S, I);

	    /* Remember, we had changes */
	    ++Changes;

	}

	/* Next entry */
	++I;

    }

    /* Return the number of changes made */
    return Changes;
}