C++ Board_LED_Set函数代码示例

/**
 * @brief	main routine for blinky example
 * @return	Function should not exit.
 */
int main(void)
{
	uint32_t sysTickRate;

	SystemCoreClockUpdate();
	Board_Init();
	Board_LED_Set(0, false);
	Board_LED_Set(1, true);

	/* The sysTick counter only has 24 bits of precision, so it will
	   overflow quickly with a fast core clock. You can alter the
	   sysTick divider to generate slower sysTick clock rates. */
	Chip_Clock_SetSysTickClockDiv(1);

	/* A SysTick divider is present that scales the sysTick rate down
	   from the core clock. Using the SystemCoreClock variable as a
	   rate reference for the SysTick_Config() function won't work,
	   so get the sysTick rate by calling Chip_Clock_GetSysTickClockRate() */
	sysTickRate = Chip_Clock_GetSysTickClockRate();

	/* Enable and setup SysTick Timer at a periodic rate */
	SysTick_Config(sysTickRate / TICKRATE_HZ1);

	/* LEDs toggle in interrupt handlers */
	while (1) {
		__WFI();
	}

	return 0;
}

void SysTick_Handler(void)
{
	uint16_t dataADC;
	//int i;
	uint32_t currentPWM;
	currentPWM=LPC_PWM1->MR1;

	//Board_LED_Toggle(0);
	Board_LED_Set(0,1);


	//Chip_ADC_SetStartMode(_LPC_ADC_ID, ADC_START_NOW, ADC_TRIGGERMODE_RISING);

	//while (Chip_ADC_ReadStatus(_LPC_ADC_ID, _ADC_CHANNLE, ADC_DR_DONE_STAT) != SET) {}
	/* Read ADC value */
	Chip_ADC_ReadValue(_LPC_ADC_ID, _ADC_CHANNLE, &dataADC);
	/* Print ADC value */
	//App_print_ADC_value(dataADC);
	/*
	if(rotation_time<MEMORY_CAPACITY){
		rotation_debug_holder[rotation_time]=(int) dataADC;
		rotation_time++;
	}
	*/

	rotation_time++;
	//if(rotation_counter<MEMORY_CAPACITY){	//debug line
    if(dataADC>sensor_threshold){
        if(rotation_phase==0){
            	//rotation_debug_holder[rotation_counter]=rotation_time;		//debug line
            	//rotation_debug_holder2[rotation_counter]=dataADC;				//debug line

            	if(currentPWM < (1000-regulation_step) && currentPWM > (regulation_step)){	//debug needed here
            		if(rotation_time>desired_rotation_time){
            			PWM_SetCycle(currentPWM+regulation_step,1000);
            		}else{
            			PWM_SetCycle(currentPWM-regulation_step,1000);
            		}
            	}
            rotation_counter++;
            rotation_time=0;
            rotation_phase=1;
        }

    }else{
    	rotation_phase = 0;
    }

	//}				//debug line

    if(rotation_time==1000){
    	if(currentPWM < (1000-regulation_step)){
    		PWM_SetCycle(currentPWM+10*regulation_step,1000);
    	}
    	rotation_time=0;
    }


	Board_LED_Set(0,0);
}

/* HID Set Report Request Callback. Called automatically on HID Set Report Request */
static ErrorCode_t Keyboard_SetReport(USBD_HANDLE_T hHid, USB_SETUP_PACKET *pSetup, uint8_t * *pBuffer, uint16_t length)
{
	/* we will reuse standard EP0Buf */
	if (length == 0) {
		return LPC_OK;
	}
	/* ReportID = SetupPacket.wValue.WB.L; */
	switch (pSetup->wValue.WB.H) {
	case HID_REPORT_OUTPUT:
		/*  If the USB host tells us to turn on the NUM LOCK LED,
		 *  then turn on LED#2.
		 */
		if (**pBuffer & 0x01) {
			Board_LED_Set(0, 1);
		}
		else {
			Board_LED_Set(0, 0);
		}
		break;

	case HID_REPORT_INPUT:				/* Not Supported */
	case HID_REPORT_FEATURE:			/* Not Supported */
		return ERR_USBD_STALL;
	}
	return LPC_OK;
}

/* UART ROM error handler */
static void uartrom_error(UART_HANDLE_T hUART, uint32_t err)
{
	switch (err) {
	case UART_ERROR_FRAME:
		/* No stop bit in uart frame; mismatched baud(?) or incorrect/short BREAK condition(?) */
		Board_LED_Set(0, 1);
		break;

	case UART_ERROR_PARITY:
		/* Parity error; mismatched baud(?) */
		while (1) {}

	case UART_ERROR_AUTOBAUD:
		/* Autobaud timeout error */
		while (1) {}

	case UART_ERROR_OVERRUN:
		/* Uart received character before ROM_UART_Receive() is called */
		Board_LED_Set(1, 1);
		break;

	case UART_ERROR_RXNOISE:
		/* Typically problem is with the baud rate and or Over sampling count */
		while (1) {}

	default:
		/* Control will never reach this */
		break;
	}
}

/**
 * @brief	Main UART program body
 * @return	Doesn't return
 */
int main(void)
{
	/* initialize the board */
	SystemCoreClockUpdate();
	Board_Init();

	Board_CMP_Init();

	/* initialize the CMP */
	Chip_CMP_Init();

	/* Power-up */
	Chip_CMP_EnableCurrentSrc(CMP_ENCTRL_ENABLE);
	Chip_CMP_EnableBandGap(CMP_ENCTRL_ENABLE);
	Chip_CMP_Enable(CMP_ID, CMP_ENCTRL_ENABLE);
	
	/* Positive and negative references, both edges, no hysteresis */
	Chip_CMP_SetPosVoltRef(CMP_ID, CMP_INPUT_CMPx_IN0);
	Chip_CMP_SetNegVoltRef(CMP_ID, CMP_INPUT_INTERNAL_09VBG);
	Chip_CMP_SetHysteresis(CMP_ID, CMP_HYS_NONE);
	
	while (1) {
		if (Chip_CMP_GetCmpStatus(CMP_ID)) {
			Board_LED_Set(0, false);
		}
		else {
			Board_LED_Set(0, true);
		}
	}

	return 0;
}

void exit_error(int error_code) {
	taskDISABLE_INTERRUPTS();
	Board_LED_Set(0, false);
	Board_LED_Set(1, false);
	Board_LED_Set(2, false);
	blink_error_code(error_code);
	exit(error_code);
}

/**
 * @brief	main routine for timer example
 * @return	Function should not exit.
 */
int main(void)
{
	uint32_t timerBaseClock;

	SystemCoreClockUpdate();
	Board_Init();
	Board_LED_Set(0, false);
	Board_LED_Set(1, false);

	/* Initialize Timer 0 and Timer 1 */
	Chip_TIMER_Init(LPC_TIMER0);
	Chip_TIMER_Init(LPC_TIMER1);

	/* Setup prescale value on Timer 0 to PCLK */
	Chip_TIMER_PrescaleSet(LPC_TIMER0, 0);
	/* Setup prescale value on Timer 1 for lower resolution */
	Chip_TIMER_PrescaleSet(LPC_TIMER1, PRESCALE_HZ2);

	/* Reset timers */
	Chip_TIMER_Reset(LPC_TIMER0);
	Chip_TIMER_Reset(LPC_TIMER1);

	/* Enable both timers to generate interrupts when time matches */
	Chip_TIMER_MatchEnableInt(LPC_TIMER0, 1);
	Chip_TIMER_MatchEnableInt(LPC_TIMER1, 1);

	/* Get rate of timer base clock */
	timerBaseClock = Chip_Clock_GetAsyncSyscon_ClockRate();

	/* Setup Timer 0 for a match every 1s */
	Chip_TIMER_SetMatch(LPC_TIMER0, 1, (timerBaseClock / TICKRATE_HZ1));

	/* Setup Timer 1 for a match twice in a second */
	Chip_TIMER_SetMatch(LPC_TIMER1, 1, (timerBaseClock / ((PRESCALE_HZ2 + 1) * TICKRATE_HZ2)) );

	/* Setup both timers to restart when match occurs */
	Chip_TIMER_ResetOnMatchEnable(LPC_TIMER0, 1);
	Chip_TIMER_ResetOnMatchEnable(LPC_TIMER1, 1);

	/* Start both timers */
	Chip_TIMER_Enable(LPC_TIMER0);
	Chip_TIMER_Enable(LPC_TIMER1);

	/* Clear both timers of any pending interrupts */
	NVIC_ClearPendingIRQ(CT32B0_IRQn);
	NVIC_ClearPendingIRQ(CT32B1_IRQn);

	/* Enable both timer interrupts */
	NVIC_EnableIRQ(CT32B0_IRQn);
	NVIC_EnableIRQ(CT32B1_IRQn);

	/* Wait for timers to generate interrupts (LEDs toggle in interrupt handlers) */
	while (1) {
		__WFI();
	}

	return 0;
}

inline void Set_LED(uint32_t LED_On_Off)
{
	if(LED_On_Off==0)
	{
		Board_LED_Set(0, false);
	}
	else
	{
		Board_LED_Set(0, true);
	}
}

inline void Toggle_LED(void)
{
	if(Board_LED_Test(0)!=false)
	{
		Board_LED_Set(0, false);
	}
	else
	{
		Board_LED_Set(0, true);
	}
}

void TIMER1_IRQHandler(void)
{
    if (Chip_TIMER_MatchPending(LPC_TIMER1, 0)) {
        Chip_TIMER_ClearMatch(LPC_TIMER1, 0);
        Board_LED_Set(0, 1);
    }
    if (Chip_TIMER_MatchPending(LPC_TIMER1, 1)) {
        Chip_TIMER_ClearMatch(LPC_TIMER1, 1);
        Board_LED_Set(0, 0);
    }
}

/* Function to blink the LED to show the error code
 * caused by M0 image boot failure
 */
static void booting_m0_failure(uint32_t msec)
{
	int32_t cnt = 60000 / (msec * 2);
	DEBUGSTR("ERROR: Boot failure!!\r\n");
	while (cnt--) {
		Board_LED_Set(ERROR_LED, 1);
		MSleep(msec);
		Board_LED_Set(ERROR_LED, 0);
		MSleep(msec);
	}
}

static void taskBlink(void * p) {
	portTickType ticks;
	tiempoOprimido = 100;
	uint32_t periodo = 1000;
	while (1) {
		ticks = xTaskGetTickCount();
		Board_LED_Set(LED3, 1);
		vTaskDelayUntil(&ticks, tiempoOprimido/portTICK_RATE_MS);
		Board_LED_Set(LED3, 0);
		vTaskDelayUntil(&ticks, (periodo-tiempoOprimido)/portTICK_RATE_MS);
	}
}

void SysTick_Handler(void)
{
	//Board_LED_Set(BOARD_LED1_GREEN,true);
	if (systick_counter==0xffffffff) systick_rollover_counter += 1;
	systick_counter += 1;

	if (systick_delay_counter!=0) systick_delay_counter -= 1;

	systick_seconds_counter += 1;
	if (systick_seconds_counter>=SYSTICK_RATE_HZ)
	{
		systick_seconds_counter = 0;
		SysTick_Seconds();
	}

	systick_led_counter -= 1;
	if (systick_led_counter==0)
	{
		systick_led_counter = LED_BLINK_RATE;
		//Board_LED_Toggle(BOARD_LED1_RED);
	}

//	loop_priority_high();
	keyboard_scan_encoders();
//	Board_LED_Set(BOARD_LED1_GREEN,false);

	if (systick_led1_green_counter>0)
	{
		systick_led1_green_counter -= 1;
		if (systick_led1_green_counter==0)
		{
			Board_LED_Set(BOARD_LED1_GREEN,BOARD_LED_OFF);
		}
	}

	if (systick_led1_red_counter>0)
	{
		systick_led1_red_counter -= 1;
		if (systick_led1_red_counter==0)
		{
			Board_LED_Set(BOARD_LED1_RED,BOARD_LED_OFF);
		}
	}

	if (systick_led3_counter>0)
	{
		systick_led3_counter -= 1;
		if (systick_led3_counter==0)
		{
			Board_LED_Set(BOARD_LED3,0);
		}
	}
}

static void tareaLED(void* p) {
	xQueueHandle queue = p;
	long delay;
	while (1) {
		if (xQueueReceive(queue, &delay, portMAX_DELAY) == pdTRUE) {
			Board_LED_Set(0, 1);
			vTaskDelay(delay / portTICK_RATE_MS);
			Board_LED_Set(0, 0);
		} else {
			// timeout
		}
	}
}

 /**
 * @brief	Main entry point
 * @return	Nothing
 */
int main(void)
{
	SPIFIobj *obj = &spifi_obj;
	uint32_t spifi_clk_mhz;
	SPIFIopers opers;
	int ret;
	spifi_rom_init(spifi);
	
	/* Initialize the board & LEDs for error indication */
	Board_Init();
	
	/* Since this code runs from SPIFI no special initialization required here */
	prepare_write_data(data_buffer, sizeof(data_buffer));

	spifi_clk_mhz = Chip_Clock_GetRate(CLK_MX_SPIFI) / 1000000;
	
	/* Typical time tCS is 20 ns min, we give 200 ns to be on safer side */
	if (spifi_init(obj, spifi_clk_mhz / 5, S_RCVCLK | S_FULLCLK, spifi_clk_mhz)) {
		DEBUGSTR("Error initializing SPIFI interface!\r\n");
		Board_LED_Set(1, 1);
		goto end_prog;
	}
	
	/* Prepare the operations structure */
	memset(&opers, 0, sizeof(SPIFIopers));
	opers.dest = (char *) SPIFI_WRITE_SECTOR_OFFSET;
	opers.length = sizeof(data_buffer);
	/* opers.options = S_VERIFY_PROG; */
	
	/* NOTE: All interrupts must be disabled before calling program as
	 * any triggered interrupts might attempt to run a code from SPIFI area
	 */
	ret = spifi_program(obj, (char *) data_buffer, &opers);
	if (ret) {
		DEBUGOUT("Error 0x%x: Programming of data buffer to SPIFI Failed!\r\n", ret);
		Board_LED_Set(1, 1);
		goto end_prog;
	}
	DEBUGSTR("SPIFI Programming successful!\r\n");

	if (verify_spifi_data((uint8_t *) SPIFI_WRITE_SECTOR_ADDRESS, sizeof(data_buffer))) {
		DEBUGSTR("Error verifying the SPIFI data\r\n");
		Board_LED_Set(1, 1);
		goto end_prog;
	}
	Board_LED_Set(0, 1);
	DEBUGSTR("SPIFI Data verified!\r\n");

end_prog:
	while(1) {__WFI();}
}