当前位置: 首页>>代码示例>>C++>>正文


C++ BUILD_BUG_ON函数代码示例

本文整理汇总了C++中BUILD_BUG_ON函数的典型用法代码示例。如果您正苦于以下问题:C++ BUILD_BUG_ON函数的具体用法?C++ BUILD_BUG_ON怎么用?C++ BUILD_BUG_ON使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了BUILD_BUG_ON函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: iwlagn_alive_notify

int iwlagn_alive_notify(struct iwl_priv *priv)
{
	u32 a;
	unsigned long flags;
	int i, chan;
	u32 reg_val;

	spin_lock_irqsave(&priv->lock, flags);

	priv->scd_base_addr = iwl_read_prph(priv, IWLAGN_SCD_SRAM_BASE_ADDR);
	a = priv->scd_base_addr + IWLAGN_SCD_CONTEXT_DATA_OFFSET;
	for (; a < priv->scd_base_addr + IWLAGN_SCD_TX_STTS_BITMAP_OFFSET;
		a += 4)
		iwl_write_targ_mem(priv, a, 0);
	for (; a < priv->scd_base_addr + IWLAGN_SCD_TRANSLATE_TBL_OFFSET;
		a += 4)
		iwl_write_targ_mem(priv, a, 0);
	for (; a < priv->scd_base_addr +
	       IWLAGN_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
		iwl_write_targ_mem(priv, a, 0);

	iwl_write_prph(priv, IWLAGN_SCD_DRAM_BASE_ADDR,
		       priv->scd_bc_tbls.dma >> 10);

	/* Enable DMA channel */
	for (chan = 0; chan < FH50_TCSR_CHNL_NUM ; chan++)
		iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
				FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
				FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);

	/* Update FH chicken bits */
	reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG);
	iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG,
			   reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);

	iwl_write_prph(priv, IWLAGN_SCD_QUEUECHAIN_SEL,
		IWLAGN_SCD_QUEUECHAIN_SEL_ALL(priv->hw_params.max_txq_num));
	iwl_write_prph(priv, IWLAGN_SCD_AGGR_SEL, 0);

	/* initiate the queues */
	for (i = 0; i < priv->hw_params.max_txq_num; i++) {
		iwl_write_prph(priv, IWLAGN_SCD_QUEUE_RDPTR(i), 0);
		iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
		iwl_write_targ_mem(priv, priv->scd_base_addr +
				IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(i), 0);
		iwl_write_targ_mem(priv, priv->scd_base_addr +
				IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(i) +
				sizeof(u32),
				((SCD_WIN_SIZE <<
				IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
				IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
				((SCD_FRAME_LIMIT <<
				IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
				IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
	}

	iwl_write_prph(priv, IWLAGN_SCD_INTERRUPT_MASK,
			IWL_MASK(0, priv->hw_params.max_txq_num));

	/* Activate all Tx DMA/FIFO channels */
	priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 7));

	iwlagn_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);

	/* make sure all queue are not stopped */
	memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped));
	for (i = 0; i < 4; i++)
		atomic_set(&priv->queue_stop_count[i], 0);

	/* reset to 0 to enable all the queue first */
	priv->txq_ctx_active_msk = 0;
	/* map qos queues to fifos one-to-one */
	BUILD_BUG_ON(ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo) != 10);

	for (i = 0; i < ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo); i++) {
		int ac = iwlagn_default_queue_to_tx_fifo[i];

		iwl_txq_ctx_activate(priv, i);

		if (ac == IWL_TX_FIFO_UNUSED)
			continue;

		iwlagn_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
	}

	spin_unlock_irqrestore(&priv->lock, flags);

	iwlagn_send_wimax_coex(priv);

	iwlagn_set_Xtal_calib(priv);
	iwl_send_calib_results(priv);

	return 0;
}
开发者ID:Medvedroid,项目名称:OT_903D-kernel-2.6.35.7,代码行数:94,代码来源:iwl-agn-ucode.c

示例2: ps3_sys_manager_handle_event

static int ps3_sys_manager_handle_event(struct ps3_system_bus_device *dev)
{
	int result;
	struct {
		u8 version;
		u8 type;
		u8 reserved_1[2];
		u32 value;
		u8 reserved_2[8];
	} event;

	BUILD_BUG_ON(sizeof(event) != 16);

	result = ps3_vuart_read(dev, &event, sizeof(event));
	BUG_ON(result && "need to retry here");

	if (event.version != 1) {
		dev_dbg(&dev->core, "%s:%d: unsupported event version (%u)\n",
			__func__, __LINE__, event.version);
		return -EIO;
	}

	switch (event.type) {
	case PS3_SM_EVENT_POWER_PRESSED:
		dev_dbg(&dev->core, "%s:%d: POWER_PRESSED (%s)\n",
			__func__, __LINE__,
			(event.value == PS3_SM_BUTTON_EVENT_SOFT ? "soft"
			: "hard"));
		ps3_sm_force_power_off = 1;
		wmb();
		kill_cad_pid(SIGINT, 1); 
		break;
	case PS3_SM_EVENT_POWER_RELEASED:
		dev_dbg(&dev->core, "%s:%d: POWER_RELEASED (%u ms)\n",
			__func__, __LINE__, event.value);
		break;
	case PS3_SM_EVENT_RESET_PRESSED:
		dev_dbg(&dev->core, "%s:%d: RESET_PRESSED (%s)\n",
			__func__, __LINE__,
			(event.value == PS3_SM_BUTTON_EVENT_SOFT ? "soft"
			: "hard"));
		ps3_sm_force_power_off = 0;
		wmb();
		kill_cad_pid(SIGINT, 1); 
		break;
	case PS3_SM_EVENT_RESET_RELEASED:
		dev_dbg(&dev->core, "%s:%d: RESET_RELEASED (%u ms)\n",
			__func__, __LINE__, event.value);
		break;
	case PS3_SM_EVENT_THERMAL_ALERT:
		dev_dbg(&dev->core, "%s:%d: THERMAL_ALERT (zone %u)\n",
			__func__, __LINE__, event.value);
		pr_info("PS3 Thermal Alert Zone %u\n", event.value);
		break;
	case PS3_SM_EVENT_THERMAL_CLEARED:
		dev_dbg(&dev->core, "%s:%d: THERMAL_CLEARED (zone %u)\n",
			__func__, __LINE__, event.value);
		break;
	default:
		dev_dbg(&dev->core, "%s:%d: unknown event (%u)\n",
			__func__, __LINE__, event.type);
		return -EIO;
	}

	return 0;
}
开发者ID:DirtyDroidX,项目名称:android_kernel_htc_m8ul,代码行数:66,代码来源:ps3-sys-manager.c

示例3: efx_mcdi_bist

static int efx_mcdi_bist(struct efx_nic *efx, unsigned int bist_mode,
			 int *results)
{
	unsigned int retry, i, count = 0;
	size_t outlen;
	u32 status;
	u8 *buf, *ptr;
	int rc;

	buf = kzalloc(0x100, GFP_KERNEL);
	if (buf == NULL)
		return -ENOMEM;

	BUILD_BUG_ON(MC_CMD_START_BIST_OUT_LEN != 0);
	MCDI_SET_DWORD(buf, START_BIST_IN_TYPE, bist_mode);
	rc = efx_mcdi_rpc(efx, MC_CMD_START_BIST, buf, MC_CMD_START_BIST_IN_LEN,
			  NULL, 0, NULL);
	if (rc)
		goto out;

	
	for (retry = 0; retry < 100; ++retry) {
		BUILD_BUG_ON(MC_CMD_POLL_BIST_IN_LEN != 0);
		rc = efx_mcdi_rpc(efx, MC_CMD_POLL_BIST, NULL, 0,
				  buf, 0x100, &outlen);
		if (rc)
			goto out;

		status = MCDI_DWORD(buf, POLL_BIST_OUT_RESULT);
		if (status != MC_CMD_POLL_BIST_RUNNING)
			goto finished;

		msleep(100);
	}

	rc = -ETIMEDOUT;
	goto out;

finished:
	results[count++] = (status == MC_CMD_POLL_BIST_PASSED) ? 1 : -1;

	
	if (efx->phy_type == PHY_TYPE_SFT9001B &&
	    (bist_mode == MC_CMD_PHY_BIST_CABLE_SHORT ||
	     bist_mode == MC_CMD_PHY_BIST_CABLE_LONG)) {
		ptr = MCDI_PTR(buf, POLL_BIST_OUT_SFT9001_CABLE_LENGTH_A);
		if (status == MC_CMD_POLL_BIST_PASSED &&
		    outlen >= MC_CMD_POLL_BIST_OUT_SFT9001_LEN) {
			for (i = 0; i < 8; i++) {
				results[count + i] =
					EFX_DWORD_FIELD(((efx_dword_t *)ptr)[i],
							EFX_DWORD_0);
			}
		}
		count += 8;
	}
	rc = count;

out:
	kfree(buf);

	return rc;
}
开发者ID:DirtyDroidX,项目名称:android_kernel_htc_m8ul,代码行数:63,代码来源:mcdi_phy.c

示例4: iwl_enqueue_hcmd

/**
 * iwl_enqueue_hcmd - enqueue a uCode command
 * @priv: device private data point
 * @cmd: a point to the ucode command structure
 *
 * The function returns < 0 values to indicate the operation is
 * failed. On success, it turns the index (> 0) of command in the
 * command queue.
 */
static int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
{
	struct iwl_tx_queue *txq = &priv->txq[priv->cmd_queue];
	struct iwl_queue *q = &txq->q;
	struct iwl_device_cmd *out_cmd;
	struct iwl_cmd_meta *out_meta;
	dma_addr_t phys_addr;
	unsigned long flags;
	u32 idx;
	u16 copy_size, cmd_size;
	bool is_ct_kill = false;
	bool had_nocopy = false;
	int i;
	u8 *cmd_dest;
#ifdef CONFIG_IWLWIFI_DEVICE_TRACING
	const void *trace_bufs[IWL_MAX_CMD_TFDS + 1] = {};
	int trace_lens[IWL_MAX_CMD_TFDS + 1] = {};
	int trace_idx;
#endif

	if (test_bit(STATUS_FW_ERROR, &priv->status)) {
		IWL_WARN(priv, "fw recovery, no hcmd send\n");
		return -EIO;
	}

	if ((priv->ucode_owner == IWL_OWNERSHIP_TM) &&
	    !(cmd->flags & CMD_ON_DEMAND)) {
		IWL_DEBUG_HC(priv, "tm own the uCode, no regular hcmd send\n");
		return -EIO;
	}

	copy_size = sizeof(out_cmd->hdr);
	cmd_size = sizeof(out_cmd->hdr);

	/* need one for the header if the first is NOCOPY */
	BUILD_BUG_ON(IWL_MAX_CMD_TFDS > IWL_NUM_OF_TBS - 1);

	for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
		if (!cmd->len[i])
			continue;
		if (cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY) {
			had_nocopy = true;
		} else {
			/* NOCOPY must not be followed by normal! */
			if (WARN_ON(had_nocopy))
				return -EINVAL;
			copy_size += cmd->len[i];
		}
		cmd_size += cmd->len[i];
	}

	/*
	 * If any of the command structures end up being larger than
	 * the TFD_MAX_PAYLOAD_SIZE and they aren't dynamically
	 * allocated into separate TFDs, then we will need to
	 * increase the size of the buffers.
	 */
	if (WARN_ON(copy_size > TFD_MAX_PAYLOAD_SIZE))
		return -EINVAL;

	if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
		IWL_WARN(priv, "Not sending command - %s KILL\n",
			 iwl_is_rfkill(priv) ? "RF" : "CT");
		return -EIO;
	}

	spin_lock_irqsave(&priv->hcmd_lock, flags);

	if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
		spin_unlock_irqrestore(&priv->hcmd_lock, flags);

		IWL_ERR(priv, "No space in command queue\n");
		is_ct_kill = iwl_check_for_ct_kill(priv);
		if (!is_ct_kill) {
			IWL_ERR(priv, "Restarting adapter due to queue full\n");
			iwlagn_fw_error(priv, false);
		}
		return -ENOSPC;
	}

	idx = get_cmd_index(q, q->write_ptr);
	out_cmd = txq->cmd[idx];
	out_meta = &txq->meta[idx];

	memset(out_meta, 0, sizeof(*out_meta));	/* re-initialize to NULL */
	if (cmd->flags & CMD_WANT_SKB)
		out_meta->source = cmd;
	if (cmd->flags & CMD_ASYNC)
		out_meta->callback = cmd->callback;

	/* set up the header */
//.........这里部分代码省略.........
开发者ID:303750856,项目名称:linux-3.1,代码行数:101,代码来源:iwl-trans-tx-pcie.c

示例5: mqprio_init

static int mqprio_init(struct Qdisc *sch, struct nlattr *opt)
{
	struct net_device *dev = qdisc_dev(sch);
	struct mqprio_sched *priv = qdisc_priv(sch);
	struct netdev_queue *dev_queue;
	struct Qdisc *qdisc;
	int i, err = -EOPNOTSUPP;
	struct tc_mqprio_qopt *qopt = NULL;

	BUILD_BUG_ON(TC_MAX_QUEUE != TC_QOPT_MAX_QUEUE);
	BUILD_BUG_ON(TC_BITMASK != TC_QOPT_BITMASK);

	if (sch->parent != TC_H_ROOT)
		return -EOPNOTSUPP;

	if (!netif_is_multiqueue(dev))
		return -EOPNOTSUPP;

	if (!opt || nla_len(opt) < sizeof(*qopt))
		return -EINVAL;

	qopt = nla_data(opt);
	if (mqprio_parse_opt(dev, qopt))
		return -EINVAL;

	/* pre-allocate qdisc, attachment can't fail */
	priv->qdiscs = kcalloc(dev->num_tx_queues, sizeof(priv->qdiscs[0]),
			       GFP_KERNEL);
	if (priv->qdiscs == NULL) {
		err = -ENOMEM;
		goto err;
	}

	for (i = 0; i < dev->num_tx_queues; i++) {
		dev_queue = netdev_get_tx_queue(dev, i);
		qdisc = qdisc_create_dflt(dev_queue, default_qdisc_ops,
					  TC_H_MAKE(TC_H_MAJ(sch->handle),
						    TC_H_MIN(i + 1)));
		if (qdisc == NULL) {
			err = -ENOMEM;
			goto err;
		}
		priv->qdiscs[i] = qdisc;
		qdisc->flags |= TCQ_F_ONETXQUEUE;
	}

	/* If the mqprio options indicate that hardware should own
	 * the queue mapping then run ndo_setup_tc otherwise use the
	 * supplied and verified mapping
	 */
	if (qopt->hw) {
		priv->hw_owned = 1;
		err = dev->netdev_ops->ndo_setup_tc(dev, qopt->num_tc);
		if (err)
			goto err;
	} else {
		netdev_set_num_tc(dev, qopt->num_tc);
		for (i = 0; i < qopt->num_tc; i++)
			netdev_set_tc_queue(dev, i,
					    qopt->count[i], qopt->offset[i]);
	}

	/* Always use supplied priority mappings */
	for (i = 0; i < TC_BITMASK + 1; i++)
		netdev_set_prio_tc_map(dev, i, qopt->prio_tc_map[i]);

	sch->flags |= TCQ_F_MQROOT;
	return 0;

err:
	mqprio_destroy(sch);
	return err;
}
开发者ID:AeroGirl,项目名称:VAR-SOM-AM33-SDK7-Kernel,代码行数:73,代码来源:sch_mqprio.c

示例6: compat_show_guest_stack

void compat_show_guest_stack(struct vcpu *v, const struct cpu_user_regs *regs,
                             int debug_stack_lines)
{
    unsigned int i, *stack, addr, mask = STACK_SIZE;

    stack = (unsigned int *)(unsigned long)regs->_esp;
    printk("Guest stack trace from esp=%08lx:\n ", (unsigned long)stack);

    if ( !__compat_access_ok(v->domain, stack, sizeof(*stack)) )
    {
        printk("Guest-inaccessible memory.\n");
        return;
    }

    if ( v != current )
    {
        struct vcpu *vcpu;
        unsigned long mfn;

        ASSERT(guest_kernel_mode(v, regs));
        mfn = read_cr3() >> PAGE_SHIFT;
        for_each_vcpu( v->domain, vcpu )
            if ( pagetable_get_pfn(vcpu->arch.guest_table) == mfn )
                break;
        if ( !vcpu )
        {
            stack = do_page_walk(v, (unsigned long)stack);
            if ( (unsigned long)stack < PAGE_SIZE )
            {
                printk("Inaccessible guest memory.\n");
                return;
            }
            mask = PAGE_SIZE;
        }
    }

    for ( i = 0; i < debug_stack_lines * 8; i++ )
    {
        if ( (((long)stack - 1) ^ ((long)(stack + 1) - 1)) & mask )
            break;
        if ( __get_user(addr, stack) )
        {
            if ( i != 0 )
                printk("\n    ");
            printk("Fault while accessing guest memory.");
            i = 1;
            break;
        }
        if ( (i != 0) && ((i % 8) == 0) )
            printk("\n ");
        printk(" %08x", addr);
        stack++;
    }
    if ( mask == PAGE_SIZE )
    {
        BUILD_BUG_ON(PAGE_SIZE == STACK_SIZE);
        unmap_domain_page(stack);
    }
    if ( i == 0 )
        printk("Stack empty.");
    printk("\n");
}
开发者ID:HackLinux,项目名称:xen-4.5,代码行数:62,代码来源:traps.c

示例7: minix_fill_super

static int minix_fill_super(struct super_block *s, void *data, int silent)
{
	struct buffer_head *bh;
	struct buffer_head **map;
	struct minix_super_block *ms;
	struct minix3_super_block *m3s = NULL;
	unsigned long i, block;
	struct inode *root_inode;
	struct minix_sb_info *sbi;
	int ret = -EINVAL;

	sbi = kzalloc(sizeof(struct minix_sb_info), GFP_KERNEL);
	if (!sbi)
		return -ENOMEM;
	s->s_fs_info = sbi;

	BUILD_BUG_ON(32 != sizeof (struct minix_inode));
	BUILD_BUG_ON(64 != sizeof(struct minix2_inode));

	if (!sb_set_blocksize(s, BLOCK_SIZE))
		goto out_bad_hblock;

	if (!(bh = sb_bread(s, 1)))
		goto out_bad_sb;

	ms = (struct minix_super_block *) bh->b_data;
	sbi->s_ms = ms;
	sbi->s_sbh = bh;
	sbi->s_mount_state = ms->s_state;
	sbi->s_ninodes = ms->s_ninodes;
	sbi->s_nzones = ms->s_nzones;
	sbi->s_imap_blocks = ms->s_imap_blocks;
	sbi->s_zmap_blocks = ms->s_zmap_blocks;
	sbi->s_firstdatazone = ms->s_firstdatazone;
	sbi->s_log_zone_size = ms->s_log_zone_size;
	sbi->s_max_size = ms->s_max_size;
	s->s_magic = ms->s_magic;
	if (s->s_magic == MINIX_SUPER_MAGIC) {
		sbi->s_version = MINIX_V1;
		sbi->s_dirsize = 16;
		sbi->s_namelen = 14;
		s->s_max_links = MINIX_LINK_MAX;
	} else if (s->s_magic == MINIX_SUPER_MAGIC2) {
		sbi->s_version = MINIX_V1;
		sbi->s_dirsize = 32;
		sbi->s_namelen = 30;
		s->s_max_links = MINIX_LINK_MAX;
	} else if (s->s_magic == MINIX2_SUPER_MAGIC) {
		sbi->s_version = MINIX_V2;
		sbi->s_nzones = ms->s_zones;
		sbi->s_dirsize = 16;
		sbi->s_namelen = 14;
		s->s_max_links = MINIX2_LINK_MAX;
	} else if (s->s_magic == MINIX2_SUPER_MAGIC2) {
		sbi->s_version = MINIX_V2;
		sbi->s_nzones = ms->s_zones;
		sbi->s_dirsize = 32;
		sbi->s_namelen = 30;
		s->s_max_links = MINIX2_LINK_MAX;
	} else if ( *(__u16 *)(bh->b_data + 24) == MINIX3_SUPER_MAGIC) {
		m3s = (struct minix3_super_block *) bh->b_data;
		s->s_magic = m3s->s_magic;
		sbi->s_imap_blocks = m3s->s_imap_blocks;
		sbi->s_zmap_blocks = m3s->s_zmap_blocks;
		sbi->s_firstdatazone = m3s->s_firstdatazone;
		sbi->s_log_zone_size = m3s->s_log_zone_size;
		sbi->s_max_size = m3s->s_max_size;
		sbi->s_ninodes = m3s->s_ninodes;
		sbi->s_nzones = m3s->s_zones;
		sbi->s_dirsize = 64;
		sbi->s_namelen = 60;
		sbi->s_version = MINIX_V3;
		sbi->s_mount_state = MINIX_VALID_FS;
		sb_set_blocksize(s, m3s->s_blocksize);
		s->s_max_links = MINIX2_LINK_MAX;
	} else
		goto out_no_fs;

	/*
	 * Allocate the buffer map to keep the superblock small.
	 */
	if (sbi->s_imap_blocks == 0 || sbi->s_zmap_blocks == 0)
		goto out_illegal_sb;
	i = (sbi->s_imap_blocks + sbi->s_zmap_blocks) * sizeof(bh);
	map = kzalloc(i, GFP_KERNEL);
	if (!map)
		goto out_no_map;
	sbi->s_imap = &map[0];
	sbi->s_zmap = &map[sbi->s_imap_blocks];

	block=2;
	for (i=0 ; i < sbi->s_imap_blocks ; i++) {
		if (!(sbi->s_imap[i]=sb_bread(s, block)))
			goto out_no_bitmap;
		block++;
	}
	for (i=0 ; i < sbi->s_zmap_blocks ; i++) {
		if (!(sbi->s_zmap[i]=sb_bread(s, block)))
			goto out_no_bitmap;
		block++;
//.........这里部分代码省略.........
开发者ID:rrowicki,项目名称:Chrono_Kernel-1,代码行数:101,代码来源:inode.c

示例8: calc_size

static unsigned int calc_size(int nlen)
{
	BUILD_BUG_ON(sizeof(ino_t) != sizeof(long));
	return ALIGN(sizeof(struct au_vdir_de) + nlen, sizeof(ino_t));
}
开发者ID:apocryphone,项目名称:htc-kernel-liberty,代码行数:5,代码来源:vdir.c

示例9: skb_entry_is_link

static int skb_entry_is_link(const union skb_entry *list)
{
	BUILD_BUG_ON(sizeof(list->skb) != sizeof(list->link));
	return ((unsigned long)list->skb < PAGE_OFFSET);
}
开发者ID:kizukukoto,项目名称:WDN900_GPL,代码行数:5,代码来源:xen-netfront.c

示例10: klp_find_object_symbol

static int klp_find_object_symbol(const char *objname, const char *name,
				  unsigned long sympos, unsigned long *addr)
{
	struct klp_find_arg args = {
		.objname = objname,
		.name = name,
		.addr = 0,
		.count = 0,
		.pos = sympos,
	};

	mutex_lock(&module_mutex);
	if (objname)
		module_kallsyms_on_each_symbol(klp_find_callback, &args);
	else
		kallsyms_on_each_symbol(klp_find_callback, &args);
	mutex_unlock(&module_mutex);

	/*
	 * Ensure an address was found. If sympos is 0, ensure symbol is unique;
	 * otherwise ensure the symbol position count matches sympos.
	 */
	if (args.addr == 0)
		pr_err("symbol '%s' not found in symbol table\n", name);
	else if (args.count > 1 && sympos == 0) {
		pr_err("unresolvable ambiguity for symbol '%s' in object '%s'\n",
		       name, objname);
	} else if (sympos != args.count && sympos > 0) {
		pr_err("symbol position %lu for symbol '%s' in object '%s' not found\n",
		       sympos, name, objname ? objname : "vmlinux");
	} else {
		*addr = args.addr;
		return 0;
	}

	*addr = 0;
	return -EINVAL;
}

static int klp_resolve_symbols(Elf_Shdr *relasec, struct module *pmod)
{
	int i, cnt, vmlinux, ret;
	char objname[MODULE_NAME_LEN];
	char symname[KSYM_NAME_LEN];
	char *strtab = pmod->core_kallsyms.strtab;
	Elf_Rela *relas;
	Elf_Sym *sym;
	unsigned long sympos, addr;

	/*
	 * Since the field widths for objname and symname in the sscanf()
	 * call are hard-coded and correspond to MODULE_NAME_LEN and
	 * KSYM_NAME_LEN respectively, we must make sure that MODULE_NAME_LEN
	 * and KSYM_NAME_LEN have the values we expect them to have.
	 *
	 * Because the value of MODULE_NAME_LEN can differ among architectures,
	 * we use the smallest/strictest upper bound possible (56, based on
	 * the current definition of MODULE_NAME_LEN) to prevent overflows.
	 */
	BUILD_BUG_ON(MODULE_NAME_LEN < 56 || KSYM_NAME_LEN != 128);

	relas = (Elf_Rela *) relasec->sh_addr;
	/* For each rela in this klp relocation section */
	for (i = 0; i < relasec->sh_size / sizeof(Elf_Rela); i++) {
		sym = pmod->core_kallsyms.symtab + ELF_R_SYM(relas[i].r_info);
		if (sym->st_shndx != SHN_LIVEPATCH) {
			pr_err("symbol %s is not marked as a livepatch symbol\n",
			       strtab + sym->st_name);
			return -EINVAL;
		}

		/* Format: .klp.sym.objname.symname,sympos */
		cnt = sscanf(strtab + sym->st_name,
			     ".klp.sym.%55[^.].%127[^,],%lu",
			     objname, symname, &sympos);
		if (cnt != 3) {
			pr_err("symbol %s has an incorrectly formatted name\n",
			       strtab + sym->st_name);
			return -EINVAL;
		}

		/* klp_find_object_symbol() treats a NULL objname as vmlinux */
		vmlinux = !strcmp(objname, "vmlinux");
		ret = klp_find_object_symbol(vmlinux ? NULL : objname,
					     symname, sympos, &addr);
		if (ret)
			return ret;

		sym->st_value = addr;
	}

	return 0;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:93,代码来源:core.c

示例11: au_mfs

/* most free space */
static void au_mfs(struct dentry *dentry, struct dentry *parent)
{
	struct super_block *sb;
	struct au_branch *br;
	struct au_wbr_mfs *mfs;
	struct dentry *h_parent;
	aufs_bindex_t bindex, bend;
	int err;
	unsigned long long b, bavail;
	struct path h_path;
	/* reduce the stack usage */
	struct kstatfs *st;

	st = kmalloc(sizeof(*st), GFP_NOFS);
	if (unlikely(!st)) {
		AuWarn1("failed updating mfs(%d), ignored\n", -ENOMEM);
		return;
	}

	bavail = 0;
	sb = dentry->d_sb;
	mfs = &au_sbi(sb)->si_wbr_mfs;
	MtxMustLock(&mfs->mfs_lock);
	mfs->mfs_bindex = -EROFS;
	mfs->mfsrr_bytes = 0;
	if (!parent) {
		bindex = 0;
		bend = au_sbend(sb);
	} else {
		bindex = au_dbstart(parent);
		bend = au_dbtaildir(parent);
	}

	for (; bindex <= bend; bindex++) {
		if (parent) {
			h_parent = au_h_dptr(parent, bindex);
			if (!h_parent || !h_parent->d_inode)
				continue;
		}
		br = au_sbr(sb, bindex);
		if (au_br_rdonly(br))
			continue;

		/* sb->s_root for NFS is unreliable */
		h_path.mnt = au_br_mnt(br);
		h_path.dentry = h_path.mnt->mnt_root;
		err = vfs_statfs(&h_path, st);
		if (unlikely(err)) {
			AuWarn1("failed statfs, b%d, %d\n", bindex, err);
			continue;
		}

		/* when the available size is equal, select the lower one */
		BUILD_BUG_ON(sizeof(b) < sizeof(st->f_bavail)
			     || sizeof(b) < sizeof(st->f_bsize));
		b = st->f_bavail * st->f_bsize;
		br->br_wbr->wbr_bytes = b;
		if (b >= bavail) {
			bavail = b;
			mfs->mfs_bindex = bindex;
			mfs->mfs_jiffy = jiffies;
		}
	}

	mfs->mfsrr_bytes = bavail;
	AuDbg("b%d\n", mfs->mfs_bindex);
	kfree(st);
}
开发者ID:AeroGirl,项目名称:VAR-SOM-AM33-SDK7-Kernel,代码行数:69,代码来源:wbr_policy.c

示例12: ubifs_init

int __init ubifs_init(void)
{
	int err;

	BUILD_BUG_ON(sizeof(struct ubifs_ch) != 24);

	/* Make sure node sizes are 8-byte aligned */
	BUILD_BUG_ON(UBIFS_CH_SZ        & 7);
	BUILD_BUG_ON(UBIFS_INO_NODE_SZ  & 7);
	BUILD_BUG_ON(UBIFS_DENT_NODE_SZ & 7);
	BUILD_BUG_ON(UBIFS_XENT_NODE_SZ & 7);
	BUILD_BUG_ON(UBIFS_DATA_NODE_SZ & 7);
	BUILD_BUG_ON(UBIFS_TRUN_NODE_SZ & 7);
	BUILD_BUG_ON(UBIFS_SB_NODE_SZ   & 7);
	BUILD_BUG_ON(UBIFS_MST_NODE_SZ  & 7);
	BUILD_BUG_ON(UBIFS_REF_NODE_SZ  & 7);
	BUILD_BUG_ON(UBIFS_CS_NODE_SZ   & 7);
	BUILD_BUG_ON(UBIFS_ORPH_NODE_SZ & 7);

	BUILD_BUG_ON(UBIFS_MAX_DENT_NODE_SZ & 7);
	BUILD_BUG_ON(UBIFS_MAX_XENT_NODE_SZ & 7);
	BUILD_BUG_ON(UBIFS_MAX_DATA_NODE_SZ & 7);
	BUILD_BUG_ON(UBIFS_MAX_INO_NODE_SZ  & 7);
	BUILD_BUG_ON(UBIFS_MAX_NODE_SZ      & 7);
	BUILD_BUG_ON(MIN_WRITE_SZ           & 7);

	/* Check min. node size */
	BUILD_BUG_ON(UBIFS_INO_NODE_SZ  < MIN_WRITE_SZ);
	BUILD_BUG_ON(UBIFS_DENT_NODE_SZ < MIN_WRITE_SZ);
	BUILD_BUG_ON(UBIFS_XENT_NODE_SZ < MIN_WRITE_SZ);
	BUILD_BUG_ON(UBIFS_TRUN_NODE_SZ < MIN_WRITE_SZ);

	BUILD_BUG_ON(UBIFS_MAX_DENT_NODE_SZ > UBIFS_MAX_NODE_SZ);
	BUILD_BUG_ON(UBIFS_MAX_XENT_NODE_SZ > UBIFS_MAX_NODE_SZ);
	BUILD_BUG_ON(UBIFS_MAX_DATA_NODE_SZ > UBIFS_MAX_NODE_SZ);
	BUILD_BUG_ON(UBIFS_MAX_INO_NODE_SZ  > UBIFS_MAX_NODE_SZ);

	/* Defined node sizes */
	BUILD_BUG_ON(UBIFS_SB_NODE_SZ  != 4096);
	BUILD_BUG_ON(UBIFS_MST_NODE_SZ != 512);
	BUILD_BUG_ON(UBIFS_INO_NODE_SZ != 160);
	BUILD_BUG_ON(UBIFS_REF_NODE_SZ != 64);

	/*
	 * We use 2 bit wide bit-fields to store compression type, which should
	 * be amended if more compressors are added. The bit-fields are:
	 * @compr_type in 'struct ubifs_inode', @default_compr in
	 * 'struct ubifs_info' and @compr_type in 'struct ubifs_mount_opts'.
	 */
	BUILD_BUG_ON(UBIFS_COMPR_TYPES_CNT > 4);

	/*
	 * We require that PAGE_CACHE_SIZE is greater-than-or-equal-to
	 * UBIFS_BLOCK_SIZE. It is assumed that both are powers of 2.
	 */
	if (PAGE_CACHE_SIZE < UBIFS_BLOCK_SIZE) {
		ubifs_err("VFS page cache size is %u bytes, but UBIFS requires"
			  " at least 4096 bytes",
			  (unsigned int)PAGE_CACHE_SIZE);
		return -EINVAL;
	}

	err = -ENOMEM;

	err = ubifs_compressors_init();
	if (err)
		goto out_shrinker;

	return 0;

out_shrinker:
	return err;
}
开发者ID:247a,项目名称:lenovo_b6000-8000_kernel_source,代码行数:73,代码来源:super.c

示例13: __check_code_syscall

static inline __always_unused void __check_code_syscall(void)
{
	BUILD_BUG_ON(sizeof(code_syscall) != BUILTIN_SYSCALL_SIZE);
	BUILD_BUG_ON(!is_log2(sizeof(code_syscall)));
}
开发者ID:balamark,项目名称:criu,代码行数:5,代码来源:crtools.c

示例14: enterprise_panel_init

int __init enterprise_panel_init(void)
{
	int err;
	struct resource __maybe_unused *res;
	struct board_info board_info;

	tegra_get_board_info(&board_info);

	BUILD_BUG_ON(ARRAY_SIZE(enterprise_bl_output_measured_a03) != 256);
	BUILD_BUG_ON(ARRAY_SIZE(enterprise_bl_output_measured_a02) != 256);

	if (board_info.fab >= BOARD_FAB_A03) {
		enterprise_disp1_backlight_data.clk_div = 0x1D;
		bl_output = enterprise_bl_output_measured_a03;
	} else
		bl_output = enterprise_bl_output_measured_a02;

	enterprise_dsi.chip_id = tegra_get_chipid();
	enterprise_dsi.chip_rev = tegra_get_revision();

#if defined(CONFIG_TEGRA_NVMAP)
	enterprise_carveouts[1].base = tegra_carveout_start;
	enterprise_carveouts[1].size = tegra_carveout_size;
#endif

	tegra_gpio_enable(enterprise_hdmi_hpd);
	gpio_request(enterprise_hdmi_hpd, "hdmi_hpd");
	gpio_direction_input(enterprise_hdmi_hpd);

	tegra_gpio_enable(enterprise_lcd_2d_3d);
	gpio_request(enterprise_lcd_2d_3d, "lcd_2d_3d");
	gpio_direction_output(enterprise_lcd_2d_3d, 0);
	enterprise_stereo_set_mode(enterprise_stereo.mode_2d_3d);

	tegra_gpio_enable(enterprise_lcd_swp_pl);
	gpio_request(enterprise_lcd_swp_pl, "lcd_swp_pl");
	gpio_direction_output(enterprise_lcd_swp_pl, 0);
	enterprise_stereo_set_orientation(enterprise_stereo.orientation);

#if !(DC_CTRL_MODE & TEGRA_DC_OUT_ONE_SHOT_MODE)
	tegra_gpio_enable(enterprise_lcd_te);
	gpio_request(enterprise_lcd_swp_pl, "lcd_te");
	gpio_direction_input(enterprise_lcd_te);
#endif

#ifdef CONFIG_HAS_EARLYSUSPEND
	enterprise_panel_early_suspender.suspend = enterprise_panel_early_suspend;
	enterprise_panel_early_suspender.resume = enterprise_panel_late_resume;
	enterprise_panel_early_suspender.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;
	register_early_suspend(&enterprise_panel_early_suspender);
#endif

#ifdef CONFIG_TEGRA_GRHOST
	err = nvhost_device_register(&tegra_grhost_device);
	if (err)
		return err;
#endif

	err = platform_add_devices(enterprise_gfx_devices,
				ARRAY_SIZE(enterprise_gfx_devices));

#if defined(CONFIG_TEGRA_GRHOST) && defined(CONFIG_TEGRA_DC)
	res = nvhost_get_resource_byname(&enterprise_disp1_device,
					 IORESOURCE_MEM, "fbmem");
	res->start = tegra_fb_start;
	res->end = tegra_fb_start + tegra_fb_size - 1;
#endif

	/* Copy the bootloader fb to the fb. */
	tegra_move_framebuffer(tegra_fb_start, tegra_bootloader_fb_start,
		min(tegra_fb_size, tegra_bootloader_fb_size));

#if defined(CONFIG_TEGRA_GRHOST) && defined(CONFIG_TEGRA_DC)
	if (!err)
		err = nvhost_device_register(&enterprise_disp1_device);

	res = nvhost_get_resource_byname(&enterprise_disp2_device,
					 IORESOURCE_MEM, "fbmem");
	res->start = tegra_fb2_start;
	res->end = tegra_fb2_start + tegra_fb2_size - 1;
	if (!err)
		err = nvhost_device_register(&enterprise_disp2_device);
#endif

#if defined(CONFIG_TEGRA_GRHOST) && defined(CONFIG_TEGRA_NVAVP)
	if (!err)
		err = nvhost_device_register(&nvavp_device);
#endif

	if (!err)
		err = platform_add_devices(enterprise_bl_devices,
				ARRAY_SIZE(enterprise_bl_devices));
	return err;
}
开发者ID:McSun,项目名称:HTC-One-X-3.1,代码行数:94,代码来源:board-enterprise-panel.c

示例15: siena_init_nic

/* This call performs hardware-specific global initialisation, such as
 * defining the descriptor cache sizes and number of RSS channels.
 * It does not set up any buffers, descriptor rings or event queues.
 */
static int siena_init_nic(struct efx_nic *efx)
{
	efx_oword_t temp;
	int rc;

	/* Recover from a failed assertion post-reset */
	rc = efx_mcdi_handle_assertion(efx);
	if (rc)
		return rc;

	/* Squash TX of packets of 16 bytes or less */
	efx_reado(efx, &temp, FR_AZ_TX_RESERVED);
	EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1);
	efx_writeo(efx, &temp, FR_AZ_TX_RESERVED);

	/* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16
	 * descriptors (which is bad).
	 */
	efx_reado(efx, &temp, FR_AZ_TX_CFG);
	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_NO_EOP_DISC_EN, 0);
	EFX_SET_OWORD_FIELD(temp, FRF_CZ_TX_FILTER_EN_BIT, 1);
	efx_writeo(efx, &temp, FR_AZ_TX_CFG);

	efx_reado(efx, &temp, FR_AZ_RX_CFG);
	EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_DESC_PUSH_EN, 0);
	EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_INGR_EN, 1);
	/* Enable hash insertion. This is broken for the 'Falcon' hash
	 * if IPv6 hashing is also enabled, so also select Toeplitz
	 * TCP/IPv4 and IPv4 hashes. */
	EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_HASH_INSRT_HDR, 1);
	EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_HASH_ALG, 1);
	EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_IP_HASH, 1);
	EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_USR_BUF_SIZE,
			    EFX_RX_USR_BUF_SIZE >> 5);
	efx_writeo(efx, &temp, FR_AZ_RX_CFG);

	/* Set hash key for IPv4 */
	memcpy(&temp, efx->rx_hash_key, sizeof(temp));
	efx_writeo(efx, &temp, FR_BZ_RX_RSS_TKEY);

	/* Enable IPv6 RSS */
	BUILD_BUG_ON(sizeof(efx->rx_hash_key) <
		     2 * sizeof(temp) + FRF_CZ_RX_RSS_IPV6_TKEY_HI_WIDTH / 8 ||
		     FRF_CZ_RX_RSS_IPV6_TKEY_HI_LBN != 0);
	memcpy(&temp, efx->rx_hash_key, sizeof(temp));
	efx_writeo(efx, &temp, FR_CZ_RX_RSS_IPV6_REG1);
	memcpy(&temp, efx->rx_hash_key + sizeof(temp), sizeof(temp));
	efx_writeo(efx, &temp, FR_CZ_RX_RSS_IPV6_REG2);
	EFX_POPULATE_OWORD_2(temp, FRF_CZ_RX_RSS_IPV6_THASH_ENABLE, 1,
			     FRF_CZ_RX_RSS_IPV6_IP_THASH_ENABLE, 1);
	memcpy(&temp, efx->rx_hash_key + 2 * sizeof(temp),
	       FRF_CZ_RX_RSS_IPV6_TKEY_HI_WIDTH / 8);
	efx_writeo(efx, &temp, FR_CZ_RX_RSS_IPV6_REG3);

	/* Enable event logging */
	rc = efx_mcdi_log_ctrl(efx, true, false, 0);
	if (rc)
		return rc;

	/* Set destination of both TX and RX Flush events */
	EFX_POPULATE_OWORD_1(temp, FRF_BZ_FLS_EVQ_ID, 0);
	efx_writeo(efx, &temp, FR_BZ_DP_CTRL);

	EFX_POPULATE_OWORD_1(temp, FRF_CZ_USREV_DIS, 1);
	efx_writeo(efx, &temp, FR_CZ_USR_EV_CFG);

	efx_nic_init_common(efx);
	return 0;
}
开发者ID:3null,项目名称:fastsocket,代码行数:73,代码来源:siena.c


注:本文中的BUILD_BUG_ON函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。