C++ AssertMsgReturn函数代码示例

/**
 * Common worker for the debug and normal APIs.
 *
 * @returns VINF_SUCCESS if entered successfully.
 * @returns rcBusy when encountering a busy critical section in GC/R0.
 * @retval  VERR_SEM_DESTROYED if the critical section is delete before or
 *          during the operation.
 *
 * @param   pCritSect           The PDM critical section to enter.
 * @param   rcBusy              The status code to return when we're in GC or R0
 *                              and the section is busy.
 */
DECL_FORCE_INLINE(int) pdmCritSectEnter(PPDMCRITSECT pCritSect, int rcBusy, PCRTLOCKVALSRCPOS pSrcPos)
{
    Assert(pCritSect->s.Core.cNestings < 8);  /* useful to catch incorrect locking */
    Assert(pCritSect->s.Core.cNestings >= 0);

    /*
     * If the critical section has already been destroyed, then inform the caller.
     */
    AssertMsgReturn(pCritSect->s.Core.u32Magic == RTCRITSECT_MAGIC,
                    ("%p %RX32\n", pCritSect, pCritSect->s.Core.u32Magic),
                    VERR_SEM_DESTROYED);

    /*
     * See if we're lucky.
     */
    /* NOP ... */
    if (pCritSect->s.Core.fFlags & RTCRITSECT_FLAGS_NOP)
        return VINF_SUCCESS;

    RTNATIVETHREAD hNativeSelf = pdmCritSectGetNativeSelf(pCritSect);
    /* ... not owned ... */
    if (ASMAtomicCmpXchgS32(&pCritSect->s.Core.cLockers, 0, -1))
        return pdmCritSectEnterFirst(pCritSect, hNativeSelf, pSrcPos);

    /* ... or nested. */
    if (pCritSect->s.Core.NativeThreadOwner == hNativeSelf)
    {
        ASMAtomicIncS32(&pCritSect->s.Core.cLockers);
        ASMAtomicIncS32(&pCritSect->s.Core.cNestings);
        Assert(pCritSect->s.Core.cNestings > 1);
        return VINF_SUCCESS;
    }

    /*
     * Spin for a bit without incrementing the counter.
     */
    /** @todo Move this to cfgm variables since it doesn't make sense to spin on UNI
     *        cpu systems. */
    int32_t cSpinsLeft = CTX_SUFF(PDMCRITSECT_SPIN_COUNT_);
    while (cSpinsLeft-- > 0)
    {
        if (ASMAtomicCmpXchgS32(&pCritSect->s.Core.cLockers, 0, -1))
            return pdmCritSectEnterFirst(pCritSect, hNativeSelf, pSrcPos);
        ASMNopPause();
        /** @todo Should use monitor/mwait on e.g. &cLockers here, possibly with a
           cli'ed pendingpreemption check up front using sti w/ instruction fusing
           for avoiding races. Hmm ... This is assuming the other party is actually
           executing code on another CPU ... which we could keep track of if we
           wanted. */
    }

#ifdef IN_RING3
    /*
     * Take the slow path.
     */
    NOREF(rcBusy);
    return pdmR3R0CritSectEnterContended(pCritSect, hNativeSelf, pSrcPos);

#else
# ifdef IN_RING0
    /** @todo If preemption is disabled it means we're in VT-x/AMD-V context
     *        and would be better off switching out of that while waiting for
     *        the lock.  Several of the locks jumps back to ring-3 just to
     *        get the lock, the ring-3 code will then call the kernel to do
     *        the lock wait and when the call return it will call ring-0
     *        again and resume via in setjmp style.  Not very efficient. */
#  if 0
    if (ASMIntAreEnabled()) /** @todo this can be handled as well by changing
                             * callers not prepared for longjmp/blocking to
                             * use PDMCritSectTryEnter. */
    {
        /*
         * Leave HM context while waiting if necessary.
         */
        int rc;
        if (RTThreadPreemptIsEnabled(NIL_RTTHREAD))
        {
            STAM_REL_COUNTER_ADD(&pCritSect->s.StatContentionRZLock,    1000000);
            rc = pdmR3R0CritSectEnterContended(pCritSect, hNativeSelf, pSrcPos);
        }
        else
        {
            STAM_REL_COUNTER_ADD(&pCritSect->s.StatContentionRZLock, 1000000000);
            PVM     pVM   = pCritSect->s.CTX_SUFF(pVM);
            PVMCPU  pVCpu = VMMGetCpu(pVM);
            HMR0Leave(pVM, pVCpu);
            RTThreadPreemptRestore(NIL_RTTHREAD, XXX);

//.........这里部分代码省略.........

RTR3DECL(int) RTPathSetTimesEx(const char *pszPath, PCRTTIMESPEC pAccessTime, PCRTTIMESPEC pModificationTime,
                               PCRTTIMESPEC pChangeTime, PCRTTIMESPEC pBirthTime, uint32_t fFlags)
{
    /*
     * Validate input.
     */
    AssertPtrReturn(pszPath, VERR_INVALID_POINTER);
    AssertReturn(*pszPath, VERR_INVALID_PARAMETER);
    AssertPtrNullReturn(pAccessTime, VERR_INVALID_POINTER);
    AssertPtrNullReturn(pModificationTime, VERR_INVALID_POINTER);
    AssertPtrNullReturn(pChangeTime, VERR_INVALID_POINTER);
    AssertPtrNullReturn(pBirthTime, VERR_INVALID_POINTER);
    AssertMsgReturn(RTPATH_F_IS_VALID(fFlags, 0), ("%#x\n", fFlags), VERR_INVALID_PARAMETER);

    /*
     * Convert the path.
     */
    PRTUTF16 pwszPath;
    int rc = RTStrToUtf16(pszPath, &pwszPath);
    if (RT_SUCCESS(rc))
    {
        HANDLE hFile;
        if (fFlags & RTPATH_F_FOLLOW_LINK)
            hFile = CreateFileW(pwszPath,
                                FILE_WRITE_ATTRIBUTES,   /* dwDesiredAccess */
                                FILE_SHARE_WRITE | FILE_SHARE_READ | FILE_SHARE_DELETE, /* dwShareMode */
                                NULL,                    /* security attribs */
                                OPEN_EXISTING,           /* dwCreationDisposition */
                                FILE_FLAG_BACKUP_SEMANTICS | FILE_ATTRIBUTE_NORMAL,
                                NULL);
        else
        {
/** @todo Symlink: Test RTPathSetTimesEx on Windows. (The code is disabled
 *        because it's not tested yet.) */
#if 0 //def FILE_FLAG_OPEN_REPARSE_POINT
            hFile = CreateFileW(pwszPath,
                                FILE_WRITE_ATTRIBUTES,   /* dwDesiredAccess */
                                FILE_SHARE_WRITE | FILE_SHARE_READ | FILE_SHARE_DELETE, /* dwShareMode */
                                NULL,                    /* security attribs */
                                OPEN_EXISTING,           /* dwCreationDisposition */
                                FILE_FLAG_BACKUP_SEMANTICS | FILE_ATTRIBUTE_NORMAL | FILE_FLAG_OPEN_REPARSE_POINT,
                                NULL);

            if (hFile == INVALID_HANDLE_VALUE && GetLastError() == ERROR_INVALID_PARAMETER)
#endif
                hFile = CreateFileW(pwszPath,
                                    FILE_WRITE_ATTRIBUTES,   /* dwDesiredAccess */
                                    FILE_SHARE_WRITE | FILE_SHARE_READ | FILE_SHARE_DELETE, /* dwShareMode */
                                    NULL,                    /* security attribs */
                                    OPEN_EXISTING,           /* dwCreationDisposition */
                                    FILE_FLAG_BACKUP_SEMANTICS | FILE_ATTRIBUTE_NORMAL,
                                    NULL);
        }
        if (hFile != INVALID_HANDLE_VALUE)
        {
            /*
             * Check if it's a no-op.
             */
            if (!pAccessTime && !pModificationTime && !pBirthTime)
                rc = VINF_SUCCESS;    /* NOP */
            else
            {
                /*
                 * Convert the input and call the API.
                 */
                FILETIME    CreationTimeFT;
                PFILETIME   pCreationTimeFT = NULL;
                if (pBirthTime)
                    pCreationTimeFT = RTTimeSpecGetNtFileTime(pBirthTime, &CreationTimeFT);

                FILETIME    LastAccessTimeFT;
                PFILETIME   pLastAccessTimeFT = NULL;
                if (pAccessTime)
                    pLastAccessTimeFT = RTTimeSpecGetNtFileTime(pAccessTime, &LastAccessTimeFT);

                FILETIME    LastWriteTimeFT;
                PFILETIME   pLastWriteTimeFT = NULL;
                if (pModificationTime)
                    pLastWriteTimeFT = RTTimeSpecGetNtFileTime(pModificationTime, &LastWriteTimeFT);

                if (SetFileTime(hFile, pCreationTimeFT, pLastAccessTimeFT, pLastWriteTimeFT))
                    rc = VINF_SUCCESS;
                else
                {
                    DWORD Err = GetLastError();
                    rc = RTErrConvertFromWin32(Err);
                    Log(("RTPathSetTimes('%s', %p, %p, %p, %p): SetFileTime failed with lasterr %d (%Rrc)\n",
                         pszPath, pAccessTime, pModificationTime, pChangeTime, pBirthTime, Err, rc));
                }
            }
            BOOL fRc = CloseHandle(hFile); Assert(fRc); NOREF(fRc);
        }
        else
        {
            DWORD Err = GetLastError();
            rc = RTErrConvertFromWin32(Err);
            Log(("RTPathSetTimes('%s',,,,): failed with %Rrc and lasterr=%u\n", pszPath, rc, Err));
        }

        RTUtf16Free(pwszPath);
//.........这里部分代码省略.........

RTDECL(int) RTDirReadEx(PRTDIR pDir, PRTDIRENTRYEX pDirEntry, size_t *pcbDirEntry, RTFSOBJATTRADD enmAdditionalAttribs, uint32_t fFlags)
{
    /*
     * Validate and digest input.
     */
    if (!rtDirValidHandle(pDir))
        return VERR_INVALID_PARAMETER;
    AssertMsgReturn(VALID_PTR(pDirEntry), ("%p\n", pDirEntry), VERR_INVALID_POINTER);
    AssertMsgReturn(    enmAdditionalAttribs >= RTFSOBJATTRADD_NOTHING
                    &&  enmAdditionalAttribs <= RTFSOBJATTRADD_LAST,
                    ("Invalid enmAdditionalAttribs=%p\n", enmAdditionalAttribs),
                    VERR_INVALID_PARAMETER);
    AssertMsgReturn(RTPATH_F_IS_VALID(fFlags, 0), ("%#x\n", fFlags), VERR_INVALID_PARAMETER);
    size_t cbDirEntry = sizeof(*pDirEntry);
    if (pcbDirEntry)
    {
        AssertMsgReturn(VALID_PTR(pcbDirEntry), ("%p\n", pcbDirEntry), VERR_INVALID_POINTER);
        cbDirEntry = *pcbDirEntry;
        AssertMsgReturn(cbDirEntry >= (unsigned)RT_OFFSETOF(RTDIRENTRYEX, szName[2]),
                        ("Invalid *pcbDirEntry=%d (min %d)\n", *pcbDirEntry, RT_OFFSETOF(RTDIRENTRYEX, szName[2])),
                        VERR_INVALID_PARAMETER);
    }

    /*
     * Fetch more data if necessary and/or convert the name.
     */
    int rc = rtDirReadMore(pDir);
    if (RT_SUCCESS(rc))
    {
        /*
         * Check if we've got enough space to return the data.
         */
        const char  *pszName    = pDir->pszName;
        const size_t cchName    = pDir->cchName;
        const size_t cbRequired = RT_OFFSETOF(RTDIRENTRYEX, szName[1]) + cchName;
        if (pcbDirEntry)
            *pcbDirEntry = cbRequired;
        if (cbRequired <= cbDirEntry)
        {
            /*
             * Setup the returned data.
             */
            pDirEntry->cwcShortName = 0;
            pDirEntry->wszShortName[0] = 0;
            pDirEntry->cbName  = (uint16_t)cchName;
            Assert(pDirEntry->cbName == cchName);
            memcpy(pDirEntry->szName, pszName, cchName + 1);

            /* get the info data */
            size_t cch = cchName + pDir->cchPath + 1;
            char *pszNamePath = (char *)alloca(cch);
            if (pszNamePath)
            {
                memcpy(pszNamePath, pDir->pszPath, pDir->cchPath);
                memcpy(pszNamePath + pDir->cchPath, pszName, cchName + 1);
                rc = RTPathQueryInfoEx(pszNamePath, &pDirEntry->Info, enmAdditionalAttribs, fFlags);
            }
            else
                rc = VERR_NO_MEMORY;
            if (RT_FAILURE(rc))
            {
#ifdef HAVE_DIRENT_D_TYPE
                rtDirSetDummyInfo(&pDirEntry->Info, rtDirType(pDir->Data.d_type));
#else
                rtDirSetDummyInfo(&pDirEntry->Info, RTDIRENTRYTYPE_UNKNOWN);
#endif
                rc = VWRN_NO_DIRENT_INFO;
            }

            /* free cached data */
            pDir->fDataUnread  = false;
            rtPathFreeIprt(pDir->pszName, pDir->Data.d_name);
            pDir->pszName = NULL;
        }
        else
            rc = VERR_BUFFER_OVERFLOW;
    }

    return rc;
}

/**
 * Runs all the filters on the specified device.
 *
 * All filters mean global and active VM, with the exception of those
 * belonging to \a aMachine. If a global ignore filter matched or if
 * none of the filters matched, the device will be released back to
 * the host.
 *
 * The device calling us here will be in the HeldByProxy, Unused, or
 * Capturable state. The caller is aware that locks held might have
 * to be abandond because of IPC and that the device might be in
 * almost any state upon return.
 *
 *
 * @returns COM status code (only parameter & state checks will fail).
 * @param   aDevice         The USB device to apply filters to.
 * @param   aIgnoreMachine  The machine to ignore filters from (we've just
 *                          detached the device from this machine).
 *
 * @note    The caller is expected to own no locks.
 */
HRESULT USBProxyService::runAllFiltersOnDevice(ComObjPtr<HostUSBDevice> &aDevice,
                                               SessionMachinesList &llOpenedMachines,
                                               SessionMachine *aIgnoreMachine)
{
    LogFlowThisFunc(("{%s} ignoring=%p\n", aDevice->i_getName().c_str(), aIgnoreMachine));

    /*
     * Verify preconditions.
     */
    AssertReturn(!isWriteLockOnCurrentThread(), E_FAIL);
    AssertReturn(!aDevice->isWriteLockOnCurrentThread(), E_FAIL);
    AutoWriteLock alock(this COMMA_LOCKVAL_SRC_POS);
    AutoWriteLock devLock(aDevice COMMA_LOCKVAL_SRC_POS);
    AssertMsgReturn(aDevice->i_isCapturableOrHeld(), ("{%s} %s\n", aDevice->i_getName().c_str(),
                                                      aDevice->i_getStateName()), E_FAIL);

    /*
     * Get the lists we'll iterate.
     */
    Host::USBDeviceFilterList globalFilters;

    mHost->i_getUSBFilters(&globalFilters);

    /*
     * Run global filters filters first.
     */
    bool fHoldIt = false;
    for (Host::USBDeviceFilterList::const_iterator it = globalFilters.begin();
         it != globalFilters.end();
         ++it)
    {
        AutoWriteLock filterLock(*it COMMA_LOCKVAL_SRC_POS);
        const HostUSBDeviceFilter::Data &data = (*it)->i_getData();
        if (aDevice->i_isMatch(data))
        {
            USBDeviceFilterAction_T action = USBDeviceFilterAction_Null;
            (*it)->COMGETTER(Action)(&action);
            if (action == USBDeviceFilterAction_Ignore)
            {
                /*
                 * Release the device to the host and we're done.
                 */
                filterLock.release();
                devLock.release();
                alock.release();
                aDevice->i_requestReleaseToHost();
                return S_OK;
            }
            if (action == USBDeviceFilterAction_Hold)
            {
                /*
                 * A device held by the proxy needs to be subjected
                 * to the machine filters.
                 */
                fHoldIt = true;
                break;
            }
            AssertMsgFailed(("action=%d\n", action));
        }
    }
    globalFilters.clear();

    /*
     * Run the per-machine filters.
     */
    for (SessionMachinesList::const_iterator it = llOpenedMachines.begin();
         it != llOpenedMachines.end();
         ++it)
    {
        ComObjPtr<SessionMachine> pMachine = *it;

        /* Skip the machine the device was just detached from. */
        if (    aIgnoreMachine
            &&  pMachine == aIgnoreMachine)
            continue;

        /* runMachineFilters takes care of checking the machine state. */
        devLock.release();
        alock.release();
//.........这里部分代码省略.........

RTDECL(int) RTFileMove(const char *pszSrc, const char *pszDst, unsigned fMove)
{
    /*
     * Validate input.
     */
    AssertMsgReturn(VALID_PTR(pszSrc), ("%p\n", pszSrc), VERR_INVALID_POINTER);
    AssertMsgReturn(VALID_PTR(pszDst), ("%p\n", pszDst), VERR_INVALID_POINTER);
    AssertMsgReturn(*pszSrc, ("%p\n", pszSrc), VERR_INVALID_PARAMETER);
    AssertMsgReturn(*pszDst, ("%p\n", pszDst), VERR_INVALID_PARAMETER);
    AssertMsgReturn(!(fMove & ~RTFILEMOVE_FLAGS_REPLACE), ("%#x\n", fMove), VERR_INVALID_PARAMETER);

    /*
     * Try RTFileRename first.
     */
    Assert(RTPATHRENAME_FLAGS_REPLACE == RTFILEMOVE_FLAGS_REPLACE);
    unsigned fRename = fMove;
    int rc = RTFileRename(pszSrc, pszDst, fRename);
    if (rc == VERR_NOT_SAME_DEVICE)
    {
        const char *pszDelete = NULL;

        /*
         * The source and target are not on the same device, darn.
         * We'll try open both ends and perform a copy.
         */
        RTFILE FileSrc;
        rc = RTFileOpen(&FileSrc, pszSrc, RTFILE_O_READ | RTFILE_O_DENY_WRITE | RTFILE_O_OPEN);
        if (RT_SUCCESS(rc))
        {
            RTFILE FileDst;
            rc = RTFileOpen(&FileDst, pszDst, RTFILE_O_WRITE | RTFILE_O_DENY_ALL | RTFILE_O_CREATE_REPLACE);
            if (RT_SUCCESS(rc))
            {
                rc = RTFileCopyByHandles(FileSrc, FileDst);
                if (RT_SUCCESS(rc))
                    pszDelete = pszSrc;
                else
                {
                    pszDelete = pszDst;
                    Log(("RTFileMove('%s', '%s', %#x): copy failed, rc=%Rrc\n",
                         pszSrc, pszDst, fMove, rc));
                }

                /* try delete without closing, and could perhaps avoid some trouble */
                int rc2 = RTFileDelete(pszDelete);
                if (RT_SUCCESS(rc2))
                    pszDelete = NULL;
                RTFileClose(FileDst);
            }
            else
                Log(("RTFileMove('%s', '%s', %#x): failed to create destination, rc=%Rrc\n",
                     pszSrc, pszDst, fMove, rc));
            RTFileClose(FileSrc);
        }
        else
            Log(("RTFileMove('%s', '%s', %#x): failed to open source, rc=%Rrc\n",
                 pszSrc, pszDst, fMove, rc));

        /* if we failed to close it while open, close it now */
        if (pszDelete)
        {
            int rc2 = RTFileDelete(pszDelete);
            if (RT_FAILURE(rc2))
                Log(("RTFileMove('%s', '%s', %#x): failed to delete '%s', rc2=%Rrc (rc=%Rrc)\n",
                     pszSrc, pszDst, fMove, pszDelete, rc2, rc));
        }
    }

    LogFlow(("RTDirRename(%p:{%s}, %p:{%s}, %#x): returns %Rrc\n",
             pszSrc, pszSrc, pszDst, pszDst, fMove, rc));
    return rc;
}

/**
 * Construct a block driver instance.
 *
 * @copydoc FNPDMDRVCONSTRUCT
 */
static DECLCALLBACK(int) drvscsiConstruct(PPDMDRVINS pDrvIns, PCFGMNODE pCfg, uint32_t fFlags)
{
    int rc = VINF_SUCCESS;
    PDRVSCSI pThis = PDMINS_2_DATA(pDrvIns, PDRVSCSI);
    LogFlowFunc(("pDrvIns=%#p pCfg=%#p\n", pDrvIns, pCfg));
    PDMDRV_CHECK_VERSIONS_RETURN(pDrvIns);

    /*
     * Initialize the instance data.
     */
    pThis->pDrvIns                              = pDrvIns;
    pThis->ISCSIConnector.pfnSCSIRequestSend    = drvscsiRequestSend;

    pDrvIns->IBase.pfnQueryInterface            = drvscsiQueryInterface;

    pThis->IPort.pfnQueryDeviceLocation         = drvscsiQueryDeviceLocation;
    pThis->IPortAsync.pfnTransferCompleteNotify = drvscsiTransferCompleteNotify;
    pThis->hQueueRequests                       = NIL_RTREQQUEUE;

    /* Query the SCSI port interface above. */
    pThis->pDevScsiPort = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, PDMISCSIPORT);
    AssertMsgReturn(pThis->pDevScsiPort, ("Missing SCSI port interface above\n"), VERR_PDM_MISSING_INTERFACE);

    /* Query the optional LED interface above. */
    pThis->pLedPort = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, PDMILEDPORTS);
    if (pThis->pLedPort != NULL)
    {
        /* Get The Led. */
        rc = pThis->pLedPort->pfnQueryStatusLed(pThis->pLedPort, 0, &pThis->pLed);
        if (RT_FAILURE(rc))
            pThis->pLed = &pThis->Led;
    }
    else
        pThis->pLed = &pThis->Led;

    /*
     * Validate and read configuration.
     */
    if (!CFGMR3AreValuesValid(pCfg, "NonRotationalMedium\0Readonly\0"))
        return PDMDRV_SET_ERROR(pDrvIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES,
                                N_("SCSI configuration error: unknown option specified"));

    rc = CFGMR3QueryBoolDef(pCfg, "NonRotationalMedium", &pThis->fNonRotational, false);
    if (RT_FAILURE(rc))
        return PDMDRV_SET_ERROR(pDrvIns, rc,
                    N_("SCSI configuration error: failed to read \"NonRotationalMedium\" as boolean"));

    rc = CFGMR3QueryBoolDef(pCfg, "Readonly", &pThis->fReadonly, false);
    if (RT_FAILURE(rc))
        return PDMDRV_SET_ERROR(pDrvIns, rc,
                                N_("SCSI configuration error: failed to read \"Readonly\" as boolean"));

    /*
     * Try attach driver below and query it's block interface.
     */
    rc = PDMDrvHlpAttach(pDrvIns, fFlags, &pThis->pDrvBase);
    AssertMsgReturn(RT_SUCCESS(rc), ("Attaching driver below failed rc=%Rrc\n", rc), rc);

    /*
     * Query the block and blockbios interfaces.
     */
    pThis->pDrvBlock = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIBLOCK);
    if (!pThis->pDrvBlock)
    {
        AssertMsgFailed(("Configuration error: No block interface!\n"));
        return VERR_PDM_MISSING_INTERFACE;
    }
    pThis->pDrvBlockBios = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIBLOCKBIOS);
    if (!pThis->pDrvBlockBios)
    {
        AssertMsgFailed(("Configuration error: No block BIOS interface!\n"));
        return VERR_PDM_MISSING_INTERFACE;
    }

    pThis->pDrvMount = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIMOUNT);

    /* Try to get the optional async block interface. */
    pThis->pDrvBlockAsync = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIBLOCKASYNC);

    PDMBLOCKTYPE enmType = pThis->pDrvBlock->pfnGetType(pThis->pDrvBlock);
    if (enmType != PDMBLOCKTYPE_HARD_DISK)
        return PDMDrvHlpVMSetError(pDrvIns, VERR_PDM_UNSUPPORTED_BLOCK_TYPE, RT_SRC_POS,
                                   N_("Only hard disks are currently supported as SCSI devices (enmType=%d)"),
                                   enmType);

    /* Create VSCSI device and LUN. */
    pThis->VScsiIoCallbacks.pfnVScsiLunMediumGetSize      = drvscsiGetSize;
    pThis->VScsiIoCallbacks.pfnVScsiLunReqTransferEnqueue = drvscsiReqTransferEnqueue;
    pThis->VScsiIoCallbacks.pfnVScsiLunGetFeatureFlags    = drvscsiGetFeatureFlags;

    rc = VSCSIDeviceCreate(&pThis->hVScsiDevice, drvscsiVScsiReqCompleted, pThis);
    AssertMsgReturn(RT_SUCCESS(rc), ("Failed to create VSCSI device rc=%Rrc\n"), rc);
    rc = VSCSILunCreate(&pThis->hVScsiLun, VSCSILUNTYPE_SBC, &pThis->VScsiIoCallbacks,
                        pThis);
    AssertMsgReturn(RT_SUCCESS(rc), ("Failed to create VSCSI LUN rc=%Rrc\n"), rc);
//.........这里部分代码省略.........

/**
 * Construct a status driver instance.
 *
 * @copydoc FNPDMDRVCONSTRUCT
 */
DECLCALLBACK(int) VMStatus::drvConstruct(PPDMDRVINS pDrvIns, PCFGMNODE pCfg, uint32_t fFlags)
{
    PDRVMAINSTATUS pData = PDMINS_2_DATA(pDrvIns, PDRVMAINSTATUS);
    LogFlow(("VMStatus::drvConstruct: iInstance=%d\n", pDrvIns->iInstance));

    /*
     * Validate configuration.
     */
    if (!CFGMR3AreValuesValid(pCfg, "papLeds\0First\0Last\0"))
        return VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES;
    AssertMsgReturn(PDMDrvHlpNoAttach(pDrvIns) == VERR_PDM_NO_ATTACHED_DRIVER,
                    ("Configuration error: Not possible to attach anything to this driver!\n"),
                    VERR_PDM_DRVINS_NO_ATTACH);

    /*
     * Data.
     */
    pDrvIns->IBase.pfnQueryInterface        = VMStatus::drvQueryInterface;
    pData->ILedConnectors.pfnUnitChanged    = VMStatus::drvUnitChanged;

    /*
     * Read config.
     */
    int rc = CFGMR3QueryPtr(pCfg, "papLeds", (void **)&pData->papLeds);
    if (RT_FAILURE(rc))
    {
        AssertMsgFailed(("Configuration error: Failed to query the \"papLeds\" value! rc=%Rrc\n", rc));
        return rc;
    }

    rc = CFGMR3QueryU32(pCfg, "First", &pData->iFirstLUN);
    if (rc == VERR_CFGM_VALUE_NOT_FOUND)
        pData->iFirstLUN = 0;
    else if (RT_FAILURE(rc))
    {
        AssertMsgFailed(("Configuration error: Failed to query the \"First\" value! rc=%Rrc\n", rc));
        return rc;
    }

    rc = CFGMR3QueryU32(pCfg, "Last", &pData->iLastLUN);
    if (rc == VERR_CFGM_VALUE_NOT_FOUND)
        pData->iLastLUN = 0;
    else if (RT_FAILURE(rc))
    {
        AssertMsgFailed(("Configuration error: Failed to query the \"Last\" value! rc=%Rrc\n", rc));
        return rc;
    }
    if (pData->iFirstLUN > pData->iLastLUN)
    {
        AssertMsgFailed(("Configuration error: Invalid unit range %u-%u\n", pData->iFirstLUN, pData->iLastLUN));
        return VERR_GENERAL_FAILURE;
    }

    /*
     * Get the ILedPorts interface of the above driver/device and
     * query the LEDs we want.
     */
    pData->pLedPorts = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, PDMILEDPORTS);
    AssertMsgReturn(pData->pLedPorts, ("Configuration error: No led ports interface above!\n"),
                    VERR_PDM_MISSING_INTERFACE_ABOVE);

    for (unsigned i = pData->iFirstLUN; i <= pData->iLastLUN; i++)
        VMStatus::drvUnitChanged(&pData->ILedConnectors, i);

    return VINF_SUCCESS;
}

/**
 * Worker for RTSemEventWaitEx and RTSemEventWaitExDebug.
 *
 * @returns VBox status code.
 * @param   pThis           The event semaphore.
 * @param   fFlags          See RTSemEventWaitEx.
 * @param   uTimeout        See RTSemEventWaitEx.
 * @param   pSrcPos         The source code position of the wait.
 */
static int rtR0SemEventWait(PRTSEMEVENTINTERNAL pThis, uint32_t fFlags, uint64_t uTimeout,
                            PCRTLOCKVALSRCPOS pSrcPos)
{
    status_t  status;
    int       rc;
    int32     flags = 0;
    bigtime_t timeout; /* in microseconds */

    /*
     * Validate the input.
     */
    AssertPtrReturn(pThis, VERR_INVALID_PARAMETER);
    AssertMsgReturn(pThis->u32Magic == RTSEMEVENT_MAGIC, ("%p u32Magic=%RX32\n", pThis, pThis->u32Magic), VERR_INVALID_PARAMETER);
    AssertReturn(RTSEMWAIT_FLAGS_ARE_VALID(fFlags), VERR_INVALID_PARAMETER);

    if (fFlags & RTSEMWAIT_FLAGS_INDEFINITE)
        timeout = B_INFINITE_TIMEOUT;
    else
    {
        if (fFlags & RTSEMWAIT_FLAGS_NANOSECS)
            timeout = uTimeout / 1000;
        else if (fFlags & RTSEMWAIT_FLAGS_MILLISECS)
            timeout = uTimeout * 1000;
        else
            return VERR_INVALID_PARAMETER;

        if (fFlags & RTSEMWAIT_FLAGS_RELATIVE)
            flags |= B_RELATIVE_TIMEOUT;
        else if (fFlags & RTSEMWAIT_FLAGS_ABSOLUTE)
            flags |= B_ABSOLUTE_TIMEOUT;
        else
            return VERR_INVALID_PARAMETER;
    }

    if (fFlags & RTSEMWAIT_FLAGS_INTERRUPTIBLE)
        flags |= B_CAN_INTERRUPT;
    // likely not:
    //else
    //    flags |= B_KILL_CAN_INTERRUPT;

    rtR0SemEventHkuRetain(pThis);

    status = acquire_sem_etc(pThis->SemId, 1, flags, timeout);

    switch (status)
    {
    case B_OK:
        rc = VINF_SUCCESS;
        break;
    case B_BAD_SEM_ID:
        rc = VERR_SEM_DESTROYED;
        break;
    case B_INTERRUPTED:
        rc = VERR_INTERRUPTED;
        break;
    case B_WOULD_BLOCK:
    /* fallthrough ? */
    case B_TIMED_OUT:
        rc = VERR_TIMEOUT;
        break;
    default:
        rc = RTErrConvertFromHaikuKernReturn(status);
        break;
    }

    rtR0SemEventHkuRelease(pThis);
    return rc;
}

/**
 * Adjusts and validates the flags.
 *
 * The adjustments are made according to the wishes specified using the RTFileSetForceFlags API.
 *
 * @returns IPRT status code.
 * @param   pfOpen      Pointer to the user specified flags on input.
 *                      Updated on successful return.
 * @internal
 */
int rtFileRecalcAndValidateFlags(uint64_t *pfOpen)
{
    /*
     * Recalc.
     */
    uint32_t fOpen = *pfOpen;
    switch (fOpen & RTFILE_O_ACCESS_MASK)
    {
        case RTFILE_O_READ:
            fOpen |= g_fOpenReadSet;
            fOpen &= ~g_fOpenReadMask;
            break;
        case RTFILE_O_WRITE:
            fOpen |= g_fOpenWriteSet;
            fOpen &= ~g_fOpenWriteMask;
            break;
        case RTFILE_O_READWRITE:
            fOpen |= g_fOpenReadWriteSet;
            fOpen &= ~g_fOpenReadWriteMask;
            break;
        default:
            AssertMsgFailed(("Invalid RW value, fOpen=%#llx\n", fOpen));
            return VERR_INVALID_PARAMETER;
    }

    /*
     * Validate                                                                                                                                       .
     */
    AssertMsgReturn(fOpen & RTFILE_O_ACCESS_MASK, ("Missing RTFILE_O_READ/WRITE: fOpen=%#llx\n", fOpen), VERR_INVALID_PARAMETER);
#if defined(RT_OS_WINDOWS) || defined(RT_OS_OS2)
    AssertMsgReturn(!(fOpen & (~(uint64_t)RTFILE_O_VALID_MASK | RTFILE_O_NON_BLOCK)), ("%#llx\n", fOpen), VERR_INVALID_PARAMETER);
#else
    AssertMsgReturn(!(fOpen & ~(uint64_t)RTFILE_O_VALID_MASK), ("%#llx\n", fOpen), VERR_INVALID_PARAMETER);
#endif
    AssertMsgReturn((fOpen & (RTFILE_O_TRUNCATE | RTFILE_O_WRITE)) != RTFILE_O_TRUNCATE, ("%#llx\n", fOpen), VERR_INVALID_PARAMETER);

    switch (fOpen & RTFILE_O_ACTION_MASK)
    {
        case 0: /* temporarily */
            AssertMsgFailed(("Missing RTFILE_O_OPEN/CREATE*! (continuable assertion)\n"));
            fOpen |= RTFILE_O_OPEN;
            break;
        case RTFILE_O_OPEN:
            AssertMsgReturn(!(RTFILE_O_NOT_CONTENT_INDEXED & fOpen), ("%#llx\n", fOpen), VERR_INVALID_PARAMETER);
        case RTFILE_O_OPEN_CREATE:
        case RTFILE_O_CREATE:
        case RTFILE_O_CREATE_REPLACE:
            break;
        default:
            AssertMsgFailed(("Invalid action value: fOpen=%#llx\n", fOpen));
            return VERR_INVALID_PARAMETER;
    }

    switch (fOpen & RTFILE_O_DENY_MASK)
    {
        case 0: /* temporarily */
            AssertMsgFailed(("Missing RTFILE_O_DENY_*! (continuable assertion)\n"));
            fOpen |= RTFILE_O_DENY_NONE;
            break;
        case RTFILE_O_DENY_NONE:
        case RTFILE_O_DENY_READ:
        case RTFILE_O_DENY_WRITE:
        case RTFILE_O_DENY_WRITE | RTFILE_O_DENY_READ:
        case RTFILE_O_DENY_NOT_DELETE:
        case RTFILE_O_DENY_NOT_DELETE | RTFILE_O_DENY_READ:
        case RTFILE_O_DENY_NOT_DELETE | RTFILE_O_DENY_WRITE:
        case RTFILE_O_DENY_NOT_DELETE | RTFILE_O_DENY_WRITE | RTFILE_O_DENY_READ:
            break;
        default:
            AssertMsgFailed(("Invalid deny value: fOpen=%#llx\n", fOpen));
            return VERR_INVALID_PARAMETER;
    }

    /* done */
    *pfOpen = fOpen;
    return VINF_SUCCESS;
}

RTDECL(RTLDRARCH) RTLdrGetArch(RTLDRMOD hLdrMod)
{
    AssertMsgReturn(rtldrIsValid(hLdrMod), ("hLdrMod=%p\n", hLdrMod), RTLDRARCH_INVALID);
    PRTLDRMODINTERNAL pMod = (PRTLDRMODINTERNAL)hLdrMod;
    return pMod->enmArch;
}

/**
 * Implements the timed wait.
 *
 * @returns See RTSemEventMultiWaitEx
 * @param   pThis               The semaphore.
 * @param   fFlags              See RTSemEventMultiWaitEx.
 * @param   uTimeout            See RTSemEventMultiWaitEx.
 * @param   pSrcPos             The source position, can be NULL.
 */
static int rtSemEventMultiPosixWaitTimed(struct RTSEMEVENTMULTIINTERNAL *pThis, uint32_t fFlags, uint64_t uTimeout,
                                         PCRTLOCKVALSRCPOS pSrcPos)
{
    /*
     * Convert uTimeout to a relative value in nano seconds.
     */
    if (fFlags & RTSEMWAIT_FLAGS_MILLISECS)
        uTimeout = uTimeout < UINT64_MAX / UINT32_C(1000000) * UINT32_C(1000000)
                 ? uTimeout * UINT32_C(1000000)
                 : UINT64_MAX;
    if (uTimeout == UINT64_MAX) /* unofficial way of indicating an indefinite wait */
        return rtSemEventMultiPosixWaitIndefinite(pThis, fFlags, pSrcPos);

    uint64_t uAbsTimeout = uTimeout;
    if (fFlags & RTSEMWAIT_FLAGS_ABSOLUTE)
    {
        uint64_t u64Now = RTTimeSystemNanoTS();
        uTimeout = uTimeout > u64Now ? uTimeout - u64Now : 0;
    }

    if (uTimeout == 0)
        return rtSemEventMultiPosixWaitPoll(pThis);

    /*
     * Get current time and calc end of deadline relative to real time.
     */
    struct timespec     ts = {0,0};
    if (!pThis->fMonotonicClock)
    {
#if defined(RT_OS_DARWIN) || defined(RT_OS_HAIKU)
        struct timeval  tv = {0,0};
        gettimeofday(&tv, NULL);
        ts.tv_sec = tv.tv_sec;
        ts.tv_nsec = tv.tv_usec * 1000;
#else
        clock_gettime(CLOCK_REALTIME, &ts);
#endif
        struct timespec tsAdd;
        tsAdd.tv_nsec = uTimeout % UINT32_C(1000000000);
        tsAdd.tv_sec  = uTimeout / UINT32_C(1000000000);
        if (   sizeof(ts.tv_sec) < sizeof(uint64_t)
            && (   uTimeout > UINT64_C(1000000000) * UINT32_MAX
                || (uint64_t)ts.tv_sec + tsAdd.tv_sec >= UINT32_MAX) )
            return rtSemEventMultiPosixWaitIndefinite(pThis, fFlags, pSrcPos);

        ts.tv_sec  += tsAdd.tv_sec;
        ts.tv_nsec += tsAdd.tv_nsec;
        if (ts.tv_nsec >= 1000000000)
        {
            ts.tv_nsec -= 1000000000;
            ts.tv_sec++;
        }
        /* Note! No need to complete uAbsTimeout for RTSEMWAIT_FLAGS_RELATIVE in this path. */
    }
    else
    {
        /* ASSUMES RTTimeSystemNanoTS() == RTTimeNanoTS() == clock_gettime(CLOCK_MONOTONIC). */
        if (fFlags & RTSEMWAIT_FLAGS_RELATIVE)
            uAbsTimeout += RTTimeSystemNanoTS();
        if (   sizeof(ts.tv_sec) < sizeof(uint64_t)
            && uAbsTimeout > UINT64_C(1000000000) * UINT32_MAX)
            return rtSemEventMultiPosixWaitIndefinite(pThis, fFlags, pSrcPos);
        ts.tv_nsec = uAbsTimeout % UINT32_C(1000000000);
        ts.tv_sec  = uAbsTimeout / UINT32_C(1000000000);
    }

    /*
     * To business!
     */
    /* take mutex */
    int rc = pthread_mutex_lock(&pThis->Mutex);
    AssertMsgReturn(rc == 0, ("rc=%d pThis=%p\n", rc, pThis), RTErrConvertFromErrno(rc)); NOREF(rc);
    ASMAtomicIncU32(&pThis->cWaiters);

    for (;;)
    {
        /* check state. */
        uint32_t const u32State = pThis->u32State;
        if (u32State != EVENTMULTI_STATE_NOT_SIGNALED)
        {
            ASMAtomicDecU32(&pThis->cWaiters);
            rc = pthread_mutex_unlock(&pThis->Mutex);
            AssertMsg(!rc, ("Failed to unlock event multi sem %p, rc=%d.\n", pThis, rc));
            return u32State == EVENTMULTI_STATE_SIGNALED
                 ? VINF_SUCCESS
                 : VERR_SEM_DESTROYED;
        }

        /* wait */
#ifdef RTSEMEVENTMULTI_STRICT
        RTTHREAD hThreadSelf = RTThreadSelfAutoAdopt();
//.........这里部分代码省略.........

/**
 * Copies a file given the handles to both files and
 * provide progress callbacks.
 *
 * @returns VBox Status code.
 *
 * @param   FileSrc     The source file. The file position is unaltered.
 * @param   FileDst     The destination file.
 *                      On successful returns the file position is at the end of the file.
 *                      On failures the file position and size is undefined.
 * @param   pfnProgress Pointer to callback function for reporting progress.
 * @param   pvUser      User argument to pass to pfnProgress along with the completion percentage.
 */
RTDECL(int) RTFileCopyByHandlesEx(RTFILE FileSrc, RTFILE FileDst, PFNRTPROGRESS pfnProgress, void *pvUser)
{
    /*
     * Validate input.
     */
    AssertMsgReturn(RTFileIsValid(FileSrc), ("FileSrc=%RTfile\n", FileSrc), VERR_INVALID_PARAMETER);
    AssertMsgReturn(RTFileIsValid(FileDst), ("FileDst=%RTfile\n", FileDst), VERR_INVALID_PARAMETER);
    AssertMsgReturn(!pfnProgress || VALID_PTR(pfnProgress), ("pfnProgress=%p\n", pfnProgress), VERR_INVALID_PARAMETER);

    /*
     * Save file offset.
     */
    RTFOFF offSrcSaved;
    int rc = RTFileSeek(FileSrc, 0, RTFILE_SEEK_CURRENT, (uint64_t *)&offSrcSaved);
    if (RT_FAILURE(rc))
        return rc;

    /*
     * Get the file size.
     */
    RTFOFF cbSrc;
    rc = RTFileSeek(FileSrc, 0, RTFILE_SEEK_END, (uint64_t *)&cbSrc);
    if (RT_FAILURE(rc))
        return rc;

    /*
     * Allocate buffer.
     */
    size_t      cbBuf;
    uint8_t    *pbBufFree = NULL;
    uint8_t    *pbBuf;
    if (cbSrc < _512K)
    {
        cbBuf = 8*_1K;
        pbBuf = (uint8_t *)alloca(cbBuf);
    }
    else
    {
        cbBuf = _128K;
        pbBuf = pbBufFree = (uint8_t *)RTMemTmpAlloc(cbBuf);
    }
    if (pbBuf)
    {
        /*
         * Seek to the start of each file
         * and set the size of the destination file.
         */
        rc = RTFileSeek(FileSrc, 0, RTFILE_SEEK_BEGIN, NULL);
        if (RT_SUCCESS(rc))
        {
            rc = RTFileSeek(FileDst, 0, RTFILE_SEEK_BEGIN, NULL);
            if (RT_SUCCESS(rc))
                rc = RTFileSetSize(FileDst, cbSrc);
            if (RT_SUCCESS(rc) && pfnProgress)
                rc = pfnProgress(0, pvUser);
            if (RT_SUCCESS(rc))
            {
                /*
                 * Copy loop.
                 */
                unsigned    uPercentage = 0;
                RTFOFF      off = 0;
                RTFOFF      cbPercent = cbSrc / 100;
                RTFOFF      offNextPercent = cbPercent;
                while (off < cbSrc)
                {
                    /* copy block */
                    RTFOFF cbLeft = cbSrc - off;
                    size_t cbBlock = cbLeft >= (RTFOFF)cbBuf ? cbBuf : (size_t)cbLeft;
                    rc = RTFileRead(FileSrc, pbBuf, cbBlock, NULL);
                    if (RT_FAILURE(rc))
                        break;
                    rc = RTFileWrite(FileDst, pbBuf, cbBlock, NULL);
                    if (RT_FAILURE(rc))
                        break;

                    /* advance */
                    off += cbBlock;
                    if (pfnProgress && offNextPercent < off)
                    {
                        while (offNextPercent < off)
                        {
                            uPercentage++;
                            offNextPercent += cbPercent;
                        }
                        rc = pfnProgress(uPercentage, pvUser);
                        if (RT_FAILURE(rc))
//.........这里部分代码省略.........

int HostDnsServiceLinux::monitorWorker()
{

    AutoNotify a;

    int rc = socketpair(AF_LOCAL, SOCK_DGRAM, 0, g_DnsMonitorStop);
    AssertMsgReturn(rc == 0, ("socketpair: failed (%d: %s)\n", errno, strerror(errno)), E_FAIL);

    FileDescriptor stopper0(g_DnsMonitorStop[0]);
    FileDescriptor stopper1(g_DnsMonitorStop[1]);

    pollfd polls[2];
    RT_ZERO(polls);

    polls[0].fd = a.fileDescriptor();
    polls[0].events = POLLIN;

    polls[1].fd = g_DnsMonitorStop[1];
    polls[1].events = POLLIN;

    monitorThreadInitializationDone();

    int wd[2];
    wd[0] = wd[1] = -1;
    /* inotify inialization */
    wd[0] = inotify_add_watch(a.fileDescriptor(),
                              g_ResolvConfFullPath.c_str(), IN_CLOSE_WRITE|IN_DELETE_SELF);

    /**
     * If /etc/resolv.conf exists we want to listen for movements: because
     * # mv /etc/resolv.conf ...
     * won't arm IN_DELETE_SELF on wd[0] instead it will fire IN_MOVE_FROM on wd[1].
     *
     * Because on some distributions /etc/resolv.conf is link, wd[0] can't detect deletion,
     * it's recognizible on directory level (wd[1]) only.
     */
    wd[1] = inotify_add_watch(a.fileDescriptor(), g_EtcFolder.c_str(),
                              wd[0] == -1 ? IN_MOVED_TO|IN_CREATE : IN_MOVED_FROM|IN_DELETE);

    struct InotifyEventWithName combo;
    while(true)
    {
        rc = poll(polls, 2, -1);
        if (rc == -1)
            continue;

        AssertMsgReturn(   ((polls[0].revents & (POLLERR|POLLNVAL)) == 0)
                        && ((polls[1].revents & (POLLERR|POLLNVAL)) == 0),
                           ("Debug Me"), VERR_INTERNAL_ERROR);

        if (polls[1].revents & POLLIN)
            return VINF_SUCCESS; /* time to shutdown */

        if (polls[0].revents & POLLIN)
        {
            RT_ZERO(combo);
            ssize_t r = read(polls[0].fd, static_cast<void *>(&combo), sizeof(combo));
            NOREF(r);

            if (combo.e.wd == wd[0])
            {
                if (combo.e.mask & IN_CLOSE_WRITE)
                {
                    readResolvConf();
                }
                else if (combo.e.mask & IN_DELETE_SELF)
                {
                    inotify_rm_watch(a.fileDescriptor(), wd[0]); /* removes file watcher */
                    inotify_add_watch(a.fileDescriptor(), g_EtcFolder.c_str(),
                                      IN_MOVED_TO|IN_CREATE); /* alter folder watcher */
                }
                else if (combo.e.mask & IN_IGNORED)
                {
                    wd[0] = -1; /* we want receive any events on this watch */
                }
                else
                {
                    /**
                     * It shouldn't happen, in release we will just ignore in debug
                     * we will have to chance to look at into inotify_event
                     */
                    AssertMsgFailed(("Debug Me!!!"));
                }
            }
            else if (combo.e.wd == wd[1])
            {
                if (   combo.e.mask & IN_MOVED_FROM
                    || combo.e.mask & IN_DELETE)
                {
                    if (g_ResolvConf == combo.e.name)
                    {
                        /**
                         * Our file has been moved so we should change watching mode.
                         */
                        inotify_rm_watch(a.fileDescriptor(), wd[0]);
                        wd[1] = inotify_add_watch(a.fileDescriptor(), g_EtcFolder.c_str(),
                                                  IN_MOVED_TO|IN_CREATE);
                        AssertMsg(wd[1] != -1,
                                  ("It shouldn't happen, further investigation is needed\n"));
                    }
//.........这里部分代码省略.........

/**
 * Construct a block driver instance.
 *
 * @copydoc FNPDMDRVCONSTRUCT
 */
static DECLCALLBACK(int) drvscsiConstruct(PPDMDRVINS pDrvIns, PCFGMNODE pCfg, uint32_t fFlags)
{
    int rc = VINF_SUCCESS;
    PDRVSCSI pThis = PDMINS_2_DATA(pDrvIns, PDRVSCSI);
    LogFlowFunc(("pDrvIns=%#p pCfg=%#p\n", pDrvIns, pCfg));
    PDMDRV_CHECK_VERSIONS_RETURN(pDrvIns);

    /*
     * Initialize the instance data.
     */
    pThis->pDrvIns                              = pDrvIns;
    pThis->ISCSIConnector.pfnSCSIRequestSend    = drvscsiRequestSend;
    pThis->ISCSIConnector.pfnQueryLUNType       = drvscsiQueryLUNType;

    pDrvIns->IBase.pfnQueryInterface            = drvscsiQueryInterface;

    pThis->IMountNotify.pfnMountNotify          = drvscsiMountNotify;
    pThis->IMountNotify.pfnUnmountNotify        = drvscsiUnmountNotify;
    pThis->IPort.pfnQueryDeviceLocation         = drvscsiQueryDeviceLocation;
    pThis->IPortAsync.pfnTransferCompleteNotify = drvscsiTransferCompleteNotify;
    pThis->hQueueRequests                       = NIL_RTREQQUEUE;

    /* Query the SCSI port interface above. */
    pThis->pDevScsiPort = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, PDMISCSIPORT);
    AssertMsgReturn(pThis->pDevScsiPort, ("Missing SCSI port interface above\n"), VERR_PDM_MISSING_INTERFACE);

    /* Query the optional LED interface above. */
    pThis->pLedPort = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, PDMILEDPORTS);
    if (pThis->pLedPort != NULL)
    {
        /* Get The Led. */
        rc = pThis->pLedPort->pfnQueryStatusLed(pThis->pLedPort, 0, &pThis->pLed);
        if (RT_FAILURE(rc))
            pThis->pLed = &pThis->Led;
    }
    else
        pThis->pLed = &pThis->Led;

    /*
     * Validate and read configuration.
     */
    if (!CFGMR3AreValuesValid(pCfg, "NonRotationalMedium\0Readonly\0"))
        return PDMDRV_SET_ERROR(pDrvIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES,
                                N_("SCSI configuration error: unknown option specified"));

    rc = CFGMR3QueryBoolDef(pCfg, "NonRotationalMedium", &pThis->fNonRotational, false);
    if (RT_FAILURE(rc))
        return PDMDRV_SET_ERROR(pDrvIns, rc,
                                N_("SCSI configuration error: failed to read \"NonRotationalMedium\" as boolean"));

    rc = CFGMR3QueryBoolDef(pCfg, "Readonly", &pThis->fReadonly, false);
    if (RT_FAILURE(rc))
        return PDMDRV_SET_ERROR(pDrvIns, rc,
                                N_("SCSI configuration error: failed to read \"Readonly\" as boolean"));

    /*
     * Try attach driver below and query it's block interface.
     */
    rc = PDMDrvHlpAttach(pDrvIns, fFlags, &pThis->pDrvBase);
    AssertMsgReturn(RT_SUCCESS(rc), ("Attaching driver below failed rc=%Rrc\n", rc), rc);

    /*
     * Query the block and blockbios interfaces.
     */
    pThis->pDrvMedia = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIMEDIA);
    if (!pThis->pDrvMedia)
    {
        AssertMsgFailed(("Configuration error: No block interface!\n"));
        return VERR_PDM_MISSING_INTERFACE;
    }

    pThis->pDrvMount = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIMOUNT);

    /* Try to get the optional async block interface. */
    pThis->pDrvMediaAsync = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIMEDIAASYNC);

    PDMMEDIATYPE enmType = pThis->pDrvMedia->pfnGetType(pThis->pDrvMedia);
    VSCSILUNTYPE enmLunType;
    switch (enmType)
    {
    case PDMMEDIATYPE_HARD_DISK:
        enmLunType = VSCSILUNTYPE_SBC;
        break;
    case PDMMEDIATYPE_CDROM:
    case PDMMEDIATYPE_DVD:
        enmLunType = VSCSILUNTYPE_MMC;
        break;
    default:
        return PDMDrvHlpVMSetError(pDrvIns, VERR_PDM_UNSUPPORTED_BLOCK_TYPE, RT_SRC_POS,
                                   N_("Only hard disks and CD/DVD-ROMs are currently supported as SCSI devices (enmType=%d)"),
                                   enmType);
    }
    if (    (   enmType == PDMMEDIATYPE_DVD
                || enmType == PDMMEDIATYPE_CDROM)
            &&  !pThis->pDrvMount)
//.........这里部分代码省略.........

/**
 * Internal worker for RTTimeNormalize and RTTimeLocalNormalize.
 * It doesn't adjust the UCT offset but leaves that for RTTimeLocalNormalize.
 */
static PRTTIME rtTimeNormalizeInternal(PRTTIME pTime)
{
    unsigned    uSecond;
    unsigned    uMinute;
    unsigned    uHour;
    bool        fLeapYear;

    /*
     * Fix the YearDay and Month/MonthDay.
     */
    fLeapYear = rtTimeIsLeapYear(pTime->i32Year);
    if (!pTime->u16YearDay)
    {
        /*
         * The Month+MonthDay must present, overflow adjust them and calc the year day.
         */
        AssertMsgReturn(    pTime->u8Month
                        &&  pTime->u8MonthDay,
                        ("date=%d-%d-%d\n", pTime->i32Year, pTime->u8Month, pTime->u8MonthDay),
                        NULL);
        while (pTime->u8Month > 12)
        {
            pTime->u8Month -= 12;
            pTime->i32Year++;
            fLeapYear = rtTimeIsLeapYear(pTime->i32Year);
            pTime->fFlags &= ~(RTTIME_FLAGS_COMMON_YEAR | RTTIME_FLAGS_LEAP_YEAR);
        }

        for (;;)
        {
            unsigned cDaysInMonth = fLeapYear
                                  ? g_acDaysInMonthsLeap[pTime->u8Month - 1]
                                  : g_acDaysInMonths[pTime->u8Month - 1];
            if (pTime->u8MonthDay <= cDaysInMonth)
                break;
            pTime->u8MonthDay -= cDaysInMonth;
            if (pTime->u8Month != 12)
                pTime->u8Month++;
            else
            {
                pTime->u8Month = 1;
                pTime->i32Year++;
                fLeapYear = rtTimeIsLeapYear(pTime->i32Year);
                pTime->fFlags &= ~(RTTIME_FLAGS_COMMON_YEAR | RTTIME_FLAGS_LEAP_YEAR);
            }
        }

        pTime->u16YearDay  = pTime->u8MonthDay - 1
                           + (fLeapYear
                              ? g_aiDayOfYearLeap[pTime->u8Month - 1]
                              : g_aiDayOfYear[pTime->u8Month - 1]);
    }
    else
    {
        /*
         * Are both YearDay and Month/MonthDay valid?
         * Check that they don't overflow and match, if not use YearDay (simpler).
         */
        bool fRecalc = true;
        if (    pTime->u8Month
            &&  pTime->u8MonthDay)
        {
            do
            {
                uint16_t u16YearDay;

                /* If you change one, zero the other to make clear what you mean. */
                AssertBreak(pTime->u8Month <= 12);
                AssertBreak(pTime->u8MonthDay <= (fLeapYear
                                                  ? g_acDaysInMonthsLeap[pTime->u8Month - 1]
                                                  : g_acDaysInMonths[pTime->u8Month - 1]));
                u16YearDay = pTime->u8MonthDay - 1
                           + (fLeapYear
                              ? g_aiDayOfYearLeap[pTime->u8Month - 1]
                              : g_aiDayOfYear[pTime->u8Month - 1]);
                AssertBreak(u16YearDay == pTime->u16YearDay);
                fRecalc = false;
            } while (0);
        }
        if (fRecalc)
        {
            const uint16_t *paiDayOfYear;

            /* overflow adjust YearDay */
            while (pTime->u16YearDay > (fLeapYear ? 366 : 365))
            {
                pTime->u16YearDay -= fLeapYear ? 366 : 365;
                pTime->i32Year++;
                fLeapYear = rtTimeIsLeapYear(pTime->i32Year);
                pTime->fFlags &= ~(RTTIME_FLAGS_COMMON_YEAR | RTTIME_FLAGS_LEAP_YEAR);
            }

            /* calc Month and MonthDay */
            paiDayOfYear = fLeapYear
                         ? &g_aiDayOfYearLeap[0]
                         : &g_aiDayOfYear[0];
//.........这里部分代码省略.........