本文整理汇总了C++中APP_DEBUG函数的典型用法代码示例。如果您正苦于以下问题：C++ APP_DEBUG函数的具体用法？C++ APP_DEBUG怎么用？C++ APP_DEBUG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了APP_DEBUG函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: Timer_handler
// timer callback function
void Timer_handler(u32 timerId, void* param)
{
*((s32*)param) +=1;
if(Stack_timer == timerId)
{
APP_DEBUG("<-- stack Timer_handler, param:%d -->\r\n", *((s32*)param));
// stack_timer repeat
if(*((s32*)param) >= TIMEOUT_COUNT)
{
s32 ret;
ret = Ql_Timer_Stop(Stack_timer);
if(ret < 0)
{
APP_DEBUG("\r\n<--failed!! stack timer Ql_Timer_Stop ret=%d-->\r\n",ret);
}
APP_DEBUG("\r\n<--stack timer Ql_Timer_Stop(ID=%d,) ret=%d-->\r\n",Stack_timer,ret);
}
}
if(GP_timer == timerId)
{
APP_DEBUG("<-- GP-Timer_handler, param:%d -->\r\n", *((s32*)param));
//not repeat
}
}示例2: idigi_run_thread
static void * idigi_run_thread(void * arg)
{
idigi_status_t status = idigi_success;
APP_DEBUG("idigi_run thread starts\n");
while (status == idigi_success)
{
status = idigi_run((idigi_handle_t)arg);
if (status == idigi_receive_error ||
status == idigi_send_error ||
status == idigi_connect_error)
{
/* server may disconnect us, so
* let's try to reconnect.
*/
status = idigi_success;
}
/* if status is not idigi_success, calling idigi_run
* again will cause to re-connect to idigi.
*/
}
APP_DEBUG("idigi_run thread exits %d\n", status);
pthread_exit(arg);
}示例3: proc_main_task
void proc_main_task(s32 taskId)
{
ST_MSG msg;
s32 ret;
// Register & open UART port
ret = Ql_UART_Register(UART_PORT1, CallBack_UART_Hdlr, NULL);
Ql_UART_Register(UART_PORT2, CallBack_UART_Hdlr, NULL);
Ql_UART_Register(UART_PORT3, CallBack_UART_Hdlr, NULL);
ret = Ql_UART_Open(UART_PORT1, 115200, FC_NONE);
Ql_UART_Open(UART_PORT2, 115200, FC_NONE);
Ql_UART_Open(UART_PORT3, 115200, FC_NONE);
APP_DEBUG("<--OpenCPU: system.-->\r\n");
while(TRUE)
{
Ql_OS_GetMessage(&msg);
switch(msg.message)
{
#ifdef __OCPU_RIL_SUPPORT__
case MSG_ID_RIL_READY:
APP_DEBUG("<-- RIL is ready -->\r\n");
Ql_RIL_Initialize();
break;
#endif
default:
break;
}
}
}示例4: CallBack_UART_Hdlr
static void CallBack_UART_Hdlr(Enum_SerialPort port, Enum_UARTEventType msg, bool level, void* customizedPara)
{
switch (msg)
{
case EVENT_UART_READY_TO_READ:
{
s32 totalBytes = ReadSerialPort(port, m_RxBuf_Uart, sizeof(m_RxBuf_Uart));
if (totalBytes > 0)
{
proc_handle(m_RxBuf_Uart,sizeof(m_RxBuf_Uart));
}
break;
}
case EVENT_UART_DTR_IND:// DTR level changed, developer can wake up the module in here
{
if(0 == level)
{
APP_DEBUG("DTR set to low =%d wake !!\r\n", level);
Ql_SleepDisable();
}
else
{
APP_DEBUG("DTR set to high =%d Sleep \r\n", level);
Ql_SleepEnable();
}
}
case EVENT_UART_READY_TO_WRITE:
break;
default:
break;
}
}示例5: InitializeSerialPort
static void InitializeSerialPort(void)
{
s32 ret;
// Register & open UART port
// UART port
ret = Ql_UART_Register(m_myUartPort, CallBack_UART_Hdlr, NULL);
if (ret < QL_RET_OK)
{
Ql_Debug_Trace("Fail to register serial port[%d], ret=%d\r\n", m_myUartPort, ret);
}
ret = Ql_UART_Open(m_myUartPort, 115200, FC_NONE);
if (ret < QL_RET_OK)
{
Ql_Debug_Trace("Fail to open serial port[%d], ret=%d\r\n", m_myUartPort, ret);
}
Ql_UART_Write(m_myUartPort, "\r\nRDY\r\n", Ql_strlen("\r\nRDY\r\n"));
// Register & open virtual serial port
ret = Ql_UART_Register(m_myVirtualPort, CallBack_UART_Hdlr, NULL);
if (ret < QL_RET_OK)
{
APP_DEBUG("Fail to register serial port[%d], ret=%d\r\n", m_myVirtualPort, ret);
}
ret = Ql_UART_Open(m_myVirtualPort, 115200, FC_NONE);
if (ret < QL_RET_OK)
{
APP_DEBUG("Fail to open serial port[%d], ret=%d\r\n", m_myVirtualPort, ret);
}
}示例6: CSD_Disconnect
void CSD_Disconnect(void)
{
// -------- Received END command, exit from CSD data mode -------
APP_DEBUG("<-- Exit from CSD data mode -->\r\n");
Ql_UART_SendEscap(m_myVirtualPort);
// -------- Close CSD connection -------
APP_DEBUG("<-- Close CSD connection -->\r\n");
Ql_UART_Write(m_myVirtualPort, "ATH\n", 4);
}示例7: CallBack_GPRS_Deactived
void CallBack_GPRS_Deactived(u8 contextId, s32 errCode, void* customParam )
{
if (errCode == SOC_SUCCESS)
{
APP_DEBUG("<--CallBack: deactived GPRS successfully.-->\r\n");
m_tcp_state = STATE_NW_GET_SIMSTATE;
}else
{
APP_DEBUG("<--CallBack: deactived GPRS failure,(contexid=%d,error_cause=%d)-->\r\n",contextId,errCode);
}
}示例8: UserData_BackUp_callback
void UserData_BackUp_callback(s8 result, u8* pUserData, s32 len)
{
if(result)// 1 means backup successfully
{
APP_DEBUG("<--callback:Sysparam backUp successfully !!!-->\r\n");
}
else // -1 means backup failed.
{
APP_DEBUG("<--callback:User Data backUP failed!!!-->\r\n");
}
}示例9: Callback_GPRS_Actived
void Callback_GPRS_Actived(u8 contexId, s32 errCode, void* customParam)
{
if(errCode == SOC_SUCCESS)
{
APP_DEBUG("<--CallBack: active GPRS successfully.-->\r\n");
m_tcp_state = STATE_GPRS_GET_DNSADDRESS;
}else
{
APP_DEBUG("<--CallBack: active GPRS successfully,errCode=%d-->\r\n",errCode);
m_tcp_state = STATE_GPRS_ACTIVATE;
}
}示例10: application_run_thread
static void * application_run_thread(void * arg)
{
int status;
APP_DEBUG("idigi_run thread starts\n");
status = application_run((idigi_handle_t)arg);
APP_DEBUG("application_run thread exits %d\n", status);
pthread_exit(arg);
}示例11: Telephony_CallOut
static void Telephony_CallOut(void)
{
s32 ret;
s32 callState;
char callOutPhoneNum[] = "15056083774\0";
ret = RIL_Telephony_Dial(0, callOutPhoneNum, &callState);
if (RIL_AT_SUCCESS == ret && CALL_STATE_OK == callState)
{
APP_DEBUG("<-- Dial \"%s\" successfully -->\r\n", callOutPhoneNum);
} else {
APP_DEBUG("<-- Fail to dial \"%s\", cause: %d -->\r\n", ret);
}
}示例12: UserData_Read_callback
void UserData_Read_callback(s8 result, u8* pUserData, s32 len)
{
ST_UARTDCB* pBackupData = (ST_UARTDCB* )pUserData;
if(result)// 1 means backup successfully
{
APP_DEBUG("<--callback: Sysparam(len=%d) Read out successfully! BaudRate=%d,DataBit=%d,FlowCtrl=%d,Parity=%d,StopBit=%d-->\r\n", \
len,pBackupData->baudrate,pBackupData->dataBits,pBackupData->flowCtrl,pBackupData->parity,pBackupData->stopBits);
}
else // -1 means backup failed.
{
APP_DEBUG("<--callback: User Data Read out failed!!!-->\r\n");
}
}示例13: CSD_Establish
void CSD_Establish(char* csdNumber)
{
char strCsdDialAT[30];
s32 len = Ql_sprintf(strCsdDialAT, "ATD%s\r\n", csdNumber);
APP_DEBUG("<-- Dialing CSD number: %s -->\r\n", csdNumber);
Ql_UART_Write(m_myVirtualPort, strCsdDialAT, len);
}示例14: proc_main_task
void proc_main_task()
{
s32 ret;
ST_MSG msg;
bool keepGoing = TRUE;
// Register & open UART port
Ql_UART_Register(UART_PORT1, CallBack_UART_Hdlr, NULL);
Ql_UART_Open(UART_PORT1, 115200, FC_NONE);
Ql_UART_Register(UART_PORT2, CallBack_UART_Hdlr, NULL);
Ql_UART_Open(UART_PORT2, 115200, FC_NONE);
APP_DEBUG("\r\n<--OpenCPU: IIC TEST!-->\r\n");
while (keepGoing)
{
Ql_OS_GetMessage(&msg);
switch(msg.message)
{
case 0:
break;
default:
break;
}
}
}示例15: app_server_reboot
static int app_server_reboot(void)
{
APP_DEBUG("Reboot from server\n");
/* should not return from rebooting the system */
return 0;
}