本文整理汇总了C++中ADDR函数的典型用法代码示例。如果您正苦于以下问题：C++ ADDR函数的具体用法？C++ ADDR怎么用？C++ ADDR使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ADDR函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: hwt_stop
/************************
*
* hwt_stop
*
* Stop hardware timer.
*
* void hwt_stop(
* struct s_smc *smc) ;
* In
* smc - A pointer to the SMT Context structure.
* Out
* Nothing.
*
************************/
void hwt_stop(struct s_smc *smc)
{
outpw(ADDR(B2_TI_CRTL), TIM_STOP) ;
outpw(ADDR(B2_TI_CRTL), TIM_CL_IRQ) ;
smc->hw.timer_activ = FALSE ;
}示例2: read_address
void read_address(struct s_smc *smc, u_char *mac_addr)
{
char ConnectorType ;
char PmdType ;
int i ;
#ifdef PCI
for (i = 0; i < 6; i++) { /* read mac address from board */
smc->hw.fddi_phys_addr.a[i] =
bitrev8(inp(ADDR(B2_MAC_0+i)));
}
#endif
ConnectorType = inp(ADDR(B2_CONN_TYP)) ;
PmdType = inp(ADDR(B2_PMD_TYP)) ;
smc->y[PA].pmd_type[PMD_SK_CONN] =
smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ;
smc->y[PA].pmd_type[PMD_SK_PMD ] =
smc->y[PB].pmd_type[PMD_SK_PMD ] = PmdType ;
if (mac_addr) {
for (i = 0; i < 6 ;i++) {
smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ;
smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]);
}
return ;
}
smc->hw.fddi_home_addr = smc->hw.fddi_phys_addr ;
for (i = 0; i < 6 ;i++) {
smc->hw.fddi_canon_addr.a[i] =
bitrev8(smc->hw.fddi_phys_addr.a[i]);
}
}示例3: i_igspill
/* i_igspill: spill node i, removing it from index j in interference graph g */
static void i_igspill (i_local_t i, i_local_t j, ig_t g) {
SCLASS(i) = STACK; /* Update storage location */
if (TYPE(i) == I_B)
ADDR(i) = v_localb(ADDR(i));
else ADDR(i) = v_local(TYPE(i));
i_igremove(j, g); /* Remove node i from integer IG */
}示例4: ADDR
JNIEXPORT jint JNICALL Java_au_notzed_jjmpeg_SwsContextNative_scaleByteArray
(JNIEnv *env, jclass jc, jobject jptr, jobject jsrc, jint srcSliceY, jint srcSliceH, jintArray jdst, jint fmt, jint width, jint height) {
struct SwsContext *sws = ADDR(jptr);
struct AVFrame *src = ADDR(jsrc);
return scaleArray(env, sws, src, srcSliceY, srcSliceH, jdst, 1, fmt, width, height);
}示例5: chkmem
/**
* @brief Checks access permissions to a memory area.
*
* @param addr Address to be checked.
* @param size Size of memory area.
* @param mask Access permissions mask.
*
* @returns Non-zero if access is authorized, and zero otherwise.
*/
PUBLIC int chkmem(const void *addr, size_t size, mode_t mask)
{
int ret; /* Return value. */
struct region *reg; /* Working memory region. */
struct pregion *preg; /* Working process region. */
/* Get associated process memory region. */
if ((preg = findreg(curr_proc, ADDR(addr))) == NULL)
return (-1);
lockreg(reg = preg->reg);
/* Not allowed. */
if (!(accessreg(curr_proc, reg) & mask))
{
unlockreg(reg);
return (-1);
}
ret = withinreg(preg, ADDR(addr));
ret &= withinreg(preg, ADDR(addr) + size);
unlockreg(reg);
return (ret);
}示例6: insa_icon
VOID insa_icon(LONG tree, WORD obj, WORD nicon, ICONBLK *pic, BYTE *ptext)
{
memcpy(pic, &G.g_iblist[nicon], sizeof(ICONBLK));
pic->ib_ptext = ADDR( ptext );
LWSET(OB_TYPE(obj), G_ICON);
LLSET(OB_SPEC(obj), ADDR(pic));
}示例7: ted_set
VOID ted_set(LONG taddr, BYTE *tmplt, BYTE *valid, BYTE *text)
{
WORD imap, itmp;
if (!tmplt[0])
{
tmplt[0] = '@';
LLSTRCPY(LLGET(TE_PVALID(taddr)), (LONG)ADDR(valid));
LLSTRCPY(LLGET(TE_PTEXT(taddr)), (LONG)ADDR(text));
if (!valid[0])
valid[0] = '@';
if (!text[0])
text[0] = '@';
}
else
{
for (imap = itmp = 0; tmplt[itmp]; itmp++)
if (tmplt[itmp] == '_')
{
tmplt[itmp] = '~';
valid[itmp] = LBGET(imap + LLGET(TE_PVALID(taddr)));
text[itmp] = LBGET(imap + LLGET(TE_PTEXT(taddr)));
imap++;
}
else
valid[itmp] = text[itmp] = '~';
valid[itmp] = text[itmp] = '\0';
}
}示例8: update_if
VOID update_if(LONG taddr, BYTE *naddr)
{
if (!LLSTRCMP(LLGET(taddr), (LONG)ADDR(naddr)))
{
LLSET(taddr, get_mem( (UWORD) strlen(naddr)+1));
LLSTRCPY((LONG)ADDR(naddr), LLGET(taddr));
}
}示例9: forker
void forker(void)
{
register FPD *f;
register PD *oldrl;
register LONG amt;
FPD g;
oldrl = rlr;
rlr = (PD *) -1;
while(fpcnt)
{
/* critical area */
cli();
fpcnt--;
f = &D.g_fpdx[fph++];
/* copy FPD so an interrupt */
/* doesn't overwrite it. */
LBCOPY(ADDR(&g), ADDR(f), sizeof(FPD) );
if (fph == NFORKS)
fph = 0;
sti();
/* */
/* see if recording */
if (gl_recd)
{
/* check for stop key */
if ( ((void *)g.f_code == (void *)kchange) &&
((g.f_data & 0x0000ffffL) == KEYSTOP) )
gl_recd = FALSE;
/* if still recording */
/* then handle event */
if (gl_recd)
{
/* if its a time event &*/
/* previously recorded*/
/* was a time event */
/* then coalesce them */
/* else record the */
/* event */
if ( ((void *)g.f_code == (void *)tchange) &&
(LLGET(gl_rbuf - sizeof(FPD)) == (LONG)tchange) )
{
amt = g.f_data + LLGET(gl_rbuf-sizeof(LONG));
LLSET(gl_rbuf - sizeof(LONG), amt);
}
else
{
LBCOPY(gl_rbuf, ADDR(f), sizeof(FPD));
gl_rbuf += sizeof(FPD);
gl_rlen--;
gl_recd = gl_rlen;
}
}
}
(*g.f_code)(g.f_data);
}
rlr = oldrl;
}示例10: tx_scl_en
/*
** 函数功能：SCL_EN引脚输出电平
** 输入参数：a=HIGH 输出高电平， a=LOW 输出低电平
** 输出参数：无
** 返回值：无
** 备注：
*/
void tx_scl_en(unsigned char a)
{
gpio_data = SCL_EN;
if(a == HIGH){
iowrite32(gpio_data, ADDR(gpio_reg, gpio_t, set_data23));
}else{
iowrite32(gpio_data, ADDR(gpio_reg, gpio_t, clr_data23));
}
}示例11: pumpOn
static void pumpOn(UArm *uarm)
{
if(FALSE == uarm->status.pump)
{
Xil_Out32(ADDR(PUMP_EN),LOW);
Xil_Out32(ADDR(VALVE_EN),HIGH);
uarm->status.pump = TRUE;
}
}示例12: set_dir_sda
/*
** 函数功能：设置SDA引脚方向，输入/输出
** 输入参数：dir=IN 输入， dir=OUT 输出
** 输出参数：无
** 返回值：无
** 备注：
*/
void set_dir_sda(int dir)
{
gpio_data = ioread32(ADDR(gpio_reg, gpio_t, dir01));
if(dir == OUT){
gpio_data &= ~SDA;
}else{
gpio_data |= SDA;
}
iowrite32(gpio_data, ADDR(gpio_reg, gpio_t,dir01));
}示例13: set_dir_scl_en
/*
** 函数功能：设置SCL_EN引脚方向，输入/输出
** 输入参数：dir=IN 输入， dir=OUT 输出
** 输出参数：无
** 返回值：无
** 备注：
*/
void set_dir_scl_en(int dir)
{
gpio_data = ioread32(ADDR(gpio_reg, gpio_t, dir23));
if(dir == OUT){
gpio_data &= ~SCL_EN;
}else{
gpio_data |= SCL_EN;
}
iowrite32(gpio_data, ADDR(gpio_reg, gpio_t,dir23));
}示例14: sqlite3DropTriggerPtr
/*
** Drop a trigger given a pointer to that trigger.
*/
void sqlite3DropTriggerPtr(Parse *pParse, Trigger *pTrigger){
Table *pTable;
Vdbe *v;
sqlite3 *db = pParse->db;
int iDb;
iDb = sqlite3SchemaToIndex(pParse->db, pTrigger->pSchema);
assert( iDb>=0 && iDb<db->nDb );
pTable = tableOfTrigger(pTrigger);
assert( pTable );
assert( pTable->pSchema==pTrigger->pSchema || iDb==1 );
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int code = SQLITE_DROP_TRIGGER;
const char *zDb = db->aDb[iDb].zName;
const char *zTab = SCHEMA_TABLE(iDb);
if( iDb==1 ) code = SQLITE_DROP_TEMP_TRIGGER;
if( sqlite3AuthCheck(pParse, code, pTrigger->zName, pTable->zName, zDb) ||
sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb) ){
return;
}
}
#endif
/* Generate code to destroy the database record of the trigger.
*/
assert( pTable!=0 );
if( (v = sqlite3GetVdbe(pParse))!=0 ){
int base;
static const int iLn = VDBE_OFFSET_LINENO(2);
static const VdbeOpList dropTrigger[] = {
{ OP_Rewind, 0, ADDR(9), 0},
{ OP_String8, 0, 1, 0}, /* 1 */
{ OP_Column, 0, 1, 2},
{ OP_Ne, 2, ADDR(8), 1},
{ OP_String8, 0, 1, 0}, /* 4: "trigger" */
{ OP_Column, 0, 0, 2},
{ OP_Ne, 2, ADDR(8), 1},
{ OP_Delete, 0, 0, 0},
{ OP_Next, 0, ADDR(1), 0}, /* 8 */
};
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3OpenMasterTable(pParse, iDb);
base = sqlite3VdbeAddOpList(v, ArraySize(dropTrigger), dropTrigger, iLn);
sqlite3VdbeChangeP4(v, base+1, pTrigger->zName, P4_TRANSIENT);
sqlite3VdbeChangeP4(v, base+4, "trigger", P4_STATIC);
sqlite3ChangeCookie(pParse, iDb);
sqlite3VdbeAddOp2(v, OP_Close, 0, 0);
sqlite3VdbeAddOp4(v, OP_DropTrigger, iDb, 0, 0, pTrigger->zName, 0);
if( pParse->nMem<3 ){
pParse->nMem = 3;
}
}
}示例15: tx_scl
/*
** 函数功能：SCL引脚输出电平
** 输入参数：a=HIGH 输出高电平， a=LOW 输出低电平
** 输出参数：无
** 返回值：无
** 备注：
*/
void tx_scl(unsigned char a)
{
tx_scl_en(HIGH);// 使能CPLD中SCL的方向，ARM->LASER
set_dir_scl(OUT);
gpio_data = SCL;
if(a == HIGH){
iowrite32(gpio_data, ADDR(gpio_reg, gpio_t, set_data01));
}else{
iowrite32(gpio_data, ADDR(gpio_reg, gpio_t, clr_data01));
}
}