VB.NET UdpClient.JoinMulticastGroup方法代碼示例

' 導入命名空間
Imports System.Net
Imports System.Net.Sockets
Imports System.Text
Imports System.IO
Imports System.Threading

' The following Receive class is used by both the ClientOriginator and 
' the ClientTarget class to receive data from one another..

Public Class Receive
   
   ' The following static method performs the actual data
   ' exchange. In particular, it performs the following tasks:
   ' 1)Establishes a communication endpoint.
   ' 2)Receive data through this end point on behalf of the
   ' caller.
   ' 3) Returns the received data in ASCII format.
   Public Shared Function ReceiveUntilStop(c As UdpClient) As String
      Dim strData As [String] = ""
      Dim Ret As [String] = ""
      Dim ASCII As New ASCIIEncoding()
      
      ' Establish the communication endpoint.
      Dim endpoint As New IPEndPoint(IPAddress.IPv6Any, 50)
      
      While Not strData.Equals("Over")
         Dim data As [Byte]() = c.Receive(endpoint)
         strData = ASCII.GetString(data)
         Ret += strData + ControlChars.Lf
      End While
      Return Ret
   End Function 'ReceiveUntilStop
End Class

' The following Send class is used by both the ClientOriginator and 
' ClientTarget classes to send data to one another.

Public Class Send
   Private Shared greetings As Char() =  {"H"c, "e"c, "l"c, "l"c, "o"c, " "c, "T"c, "a"c, "r"c, "g"c, "e"c, "t"c, "."c}
   Private Shared nice As Char() =  {"H"c, "a"c, "v"c, "e"c, " "c, "a"c, " "c, "n"c, "i"c, "c"c, "e"c, " "c, "d"c, "a"c, "y"c, "."c}
   Private Shared eom As Char() =  {"O"c, "v"c, "e"c, "r"c}
   
   Private Shared tGreetings As Char() =  {"H"c, "e"c, "l"c, "l"c, "o"c, " "c, "O"c, "r"c, "i"c, "g"c, "i"c, "n"c, "a"c, "t"c, "o"c, "r"c, "!"c}
   Private Shared tNice As Char() =  {"Y"c, "o"c, "u"c, " "c, "t"c, "o"c, "o"c, "."c}
   
   
   ' The following static method sends data to the ClientTarget on 
   ' behalf of the ClientOriginator.
   Public Shared Sub OriginatorSendData(c As UdpClient, ep As IPEndPoint)
      Console.WriteLine(New String(greetings))
      c.Send(GetByteArray(greetings), greetings.Length, ep)
      Thread.Sleep(1000)
      
      Console.WriteLine(New [String](nice))
      c.Send(GetByteArray(nice), nice.Length, ep)
      
      Thread.Sleep(1000)
      Console.WriteLine(New [String](eom))
      c.Send(GetByteArray(eom), eom.Length, ep)
   End Sub
   
   
   ' The following static method sends data to the ClientOriginator on 
   ' behalf of the ClientTarget.
   Public Shared Sub TargetSendData(c As UdpClient, ep As IPEndPoint)
      Console.WriteLine(New String(tGreetings))
      c.Send(GetByteArray(tGreetings), tGreetings.Length, ep)
      Thread.Sleep(1000)
      
      Console.WriteLine(New [String](tNice))
      c.Send(GetByteArray(tNice), tNice.Length, ep)
      
      Thread.Sleep(1000)
      Console.WriteLine(New [String](eom))
      c.Send(GetByteArray(eom), eom.Length, ep)
   End Sub
   
   ' Internal utility 
   Public Shared Function GetByteArray(ChArray() As [Char]) As [Byte]()
      Dim Ret(ChArray.Length) As [Byte]
      
      Dim i As Integer
      For i = 0 To ChArray.Length - 1
         Ret(i) = AscW(ChArray(i))
      Next i 
      Return Ret
   End Function 'GetByteArray

End Class


' The ClientTarget class is the receiver of the ClientOriginator 
' messages. The StartMulticastConversation method contains the 
' logic for exchanging data between the ClientTarget and its 
' counterpart ClientOriginator in a multicast operation.

Public Class ClientTarget
   Private Shared m_ClientTarget As UdpClient
   Private Shared m_GrpAddr As IPAddress
   
   
   ' The following StartMulticastConversation method connects the UDP 
   ' ClientTarget with the ClientOriginator. 
   ' It performs the following main tasks:
   ' 1)Creates a UDP client to receive data on a specific port and using 
   ' IPv6 addresses. The port is the same one used by the ClientOriginator 
   ' to define its communication endpoint.
   ' 2)Joins or creates a multicast group at the specified address.  
   ' 3)Defines the endpoint port to send data to the ClientOriginator.
   ' 4)Receives data from the ClientOriginator until the end of the 
   ' communication.
   ' 5)Sends data to the ClientOriginator.
   ' Note this method is the counterpart of the 
   ' ClientOriginator.ConnectOriginatorAndTarget().
   Public Shared Sub StartMulticastConversation()
      Dim Ret As String
      
      ' Bind and listen on port 1000. Specify the IPv6 address family type.
      m_ClientTarget = New UdpClient(1000, AddressFamily.InterNetworkV6)
      
      ' Join or create a multicast group
      m_GrpAddr = IPAddress.Parse("FF01::1")
      
      ' Use the overloaded JoinMulticastGroup method.  
      ' Refer to the ClientOriginator method to see how to use the other 
      ' methods.
      m_ClientTarget.JoinMulticastGroup(m_GrpAddr)
      
      ' Define the endpoint data port. Note that this port number
      ' must match the ClientOriginator UDP port number which is the
      ' port on which the ClientOriginator is receiving data.
      Dim ClientOriginatordest As New IPEndPoint(m_GrpAddr, 2000)
      
      ' Receive data from the ClientOriginator.
      Ret = Receive.ReceiveUntilStop(m_ClientTarget)
      Console.WriteLine((ControlChars.Lf + "The ClientTarget received: " + ControlChars.Lf + ControlChars.Lf + Ret + ControlChars.Lf))
      
      ' Done receiving, now respond to the ClientOriginator.
      ' Wait to make sure the ClientOriginator is ready to receive.
      Thread.Sleep(2000)
      
      Console.WriteLine(ControlChars.Lf + "The ClientTarget sent:" + ControlChars.Lf)
      
      Send.TargetSendData(m_ClientTarget, ClientOriginatordest)
      
      ' Exit the multicast conversation. 
      m_ClientTarget.DropMulticastGroup(m_GrpAddr)
   End Sub
End Class


' The following ClientOriginator class starts the multicast conversation
' with the ClientTarget class.. 
' It performs the following main tasks:
' 1)Creates a socket and binds it to the port on which to communicate.
' 2)Specifies that the connection must use an IPv6 address.
' 3)Joins or create a multicast group. 
'   Note that the multicast address ranges to use are specified 
'   in the RFC#2375. 
' 4)Defines the endpoint to send the data to and starts the 
' client target (ClientTarget) thread.

Public Class ClientOriginator
   Private Shared clientOriginator As UdpClient
   Private Shared m_GrpAddr As IPAddress
   Private Shared m_ClientTargetdest As IPEndPoint
   Private Shared m_t As Thread
   
   
   ' The ConnectOriginatorAndTarget method connects the 
   ' ClientOriginator with the ClientTarget.
   ' It performs the following main tasks:
   ' 1)Creates a UDP client to receive data on a specific port 
   '   using IPv6 addresses. 
   ' 2)Joins or create a multicast group at the specified address.  
   ' 3)Defines the endpoint port to send data to on the ClientTarget.
   ' 4)Starts the ClientTarget thread that also creates the ClientTarget object.
   ' Note this method is the counterpart of the 
   ' ClientTarget.StartMulticastConversation().
   Public Shared Function ConnectOriginatorAndTarget() As Boolean
      Try
         ' Bind and listen on port 2000. This constructor creates a socket 
         ' and binds it to the port on which to receive data. The family 
         ' parameter specifies that this connection uses an IPv6 address.
         clientOriginator = New UdpClient(2000, AddressFamily.InterNetworkV6)
         
         ' Join or create a multicast group. The multicast address ranges 
         ' to use are specified in RFC#2375. You are free to use 
         ' different addresses.
         ' Transform the string address into the internal format.
         m_GrpAddr = IPAddress.Parse("FF01::1")
         
         ' Display the multicast address used.
         Console.WriteLine(("Multicast Address: [" + m_GrpAddr.ToString() + "]"))
         
         ' Exercise the use of the IPv6MulticastOption.
         Console.WriteLine("Instantiate IPv6MulticastOption(IPAddress)")
         
         ' Instantiate IPv6MulticastOption using one of the 
         ' overloaded constructors.
         Dim ipv6MulticastOption As New IPv6MulticastOption(m_GrpAddr)
         
         ' Store the IPAdress multicast options.
         Dim group As IPAddress = ipv6MulticastOption.Group
         Dim interfaceIndex As Long = ipv6MulticastOption.InterfaceIndex
         
         ' Display IPv6MulticastOption properties.
         Console.WriteLine(("IPv6MulticastOption.Group: [" + group.ToString() + "]"))
         Console.WriteLine(("IPv6MulticastOption.InterfaceIndex: [" + interfaceIndex.ToString() + "]"))
         
         ' Instantiate IPv6MulticastOption using another 
         ' overloaded constructor.
         Dim ipv6MulticastOption2 As New IPv6MulticastOption(group, interfaceIndex)
         
         ' Store the IPAdress multicast options.
         group = ipv6MulticastOption2.Group
         interfaceIndex = ipv6MulticastOption2.InterfaceIndex
         
         ' Display the IPv6MulticastOption2 properties.
         Console.WriteLine(("IPv6MulticastOption.Group: [" + group.ToString() + "]"))
         Console.WriteLine(("IPv6MulticastOption.InterfaceIndex: [" + interfaceIndex.ToString() + "]"))
         
         ' Join the specified multicast group using one of the 
         ' JoinMulticastGroup overloaded methods.
         clientOriginator.JoinMulticastGroup(Fix(interfaceIndex), group)
         
         ' Define the endpoint data port. Note that this port number
         ' must match the ClientTarget UDP port number which is the
         ' port on which the ClientTarget is receiving data.
         m_ClientTargetdest = New IPEndPoint(m_GrpAddr, 1000)
         
         ' Start the ClientTarget thread so it is ready to receive.
         m_t = New Thread(New ThreadStart(AddressOf ClientTarget.StartMulticastConversation))
         m_t.Start()
         
         ' Make sure that the thread has started.
         Thread.Sleep(2000)
         
         Return True
      Catch e As Exception
         Console.WriteLine(("[ClientOriginator.ConnectClients] Exception: " + e.ToString()))
         Return False
      End Try
   End Function 'ConnectOriginatorAndTarget
   
   
   ' The SendAndReceive performs the data exchange  
   ' between the ClientOriginator and the ClientTarget classes.
   Public Shared Function SendAndReceive() As String
      Dim Ret As String = ""
      
      ' Send data to ClientTarget.
      Console.WriteLine(ControlChars.Lf + "The ClientOriginator sent:" + ControlChars.Lf)
      Send.OriginatorSendData(clientOriginator, m_ClientTargetdest)
      
      ' Receive data from ClientTarget
      Ret = Receive.ReceiveUntilStop(clientOriginator)
      
      ' Stop the ClientTarget thread
      m_t.Abort()
      
      ' Abandon the multicast group.
      clientOriginator.DropMulticastGroup(m_GrpAddr)
      
      Return Ret
   End Function 'SendAndReceive
   
   
   'This is the console application entry point.
   Public Shared Sub Main()
      ' Join the multicast group.
      If ConnectOriginatorAndTarget() Then
         ' Perform a multicast conversation with the ClientTarget.
         Dim Ret As String = SendAndReceive()
         Console.WriteLine((ControlChars.Lf + "The ClientOriginator received: " + ControlChars.Lf + ControlChars.Lf + Ret))
      Else
         Console.WriteLine("Unable to Join the multicast group")
      End If
   End Sub
End Class

' Instantiate IPv6MulticastOption using another 
' overloaded constructor.
Dim ipv6MulticastOption2 As New IPv6MulticastOption(group, interfaceIndex)

' Store the IPAdress multicast options.
group = ipv6MulticastOption2.Group
interfaceIndex = ipv6MulticastOption2.InterfaceIndex

' Display the IPv6MulticastOption2 properties.
Console.WriteLine(("IPv6MulticastOption.Group: [" + group.ToString() + "]"))
Console.WriteLine(("IPv6MulticastOption.InterfaceIndex: [" + interfaceIndex.ToString() + "]"))

' Join the specified multicast group using one of the 
' JoinMulticastGroup overloaded methods.
clientOriginator.JoinMulticastGroup(Fix(interfaceIndex), group)

Dim udpClient As New UdpClient()
' Creates an IP address to use to join and drop the multicast group.
Dim multicastIpAddress As IPAddress = IPAddress.Parse("239.255.255.255")

Try
   ' The packet dies after 50 router hops.
   udpClient.JoinMulticastGroup(multicastIpAddress, 50)
Catch e As Exception
   Console.WriteLine(e.ToString())
End Try

' 導入命名空間
Imports System.Net.Sockets
Imports System.Text
Imports System.IO
Imports System.Net
Imports System.Threading
Public Class Tester

    Public Shared Sub Main
        Dim GroupEP As IPEndPoint
        Dim SendUdp As New UdpClient()
        Dim GroupIP As IPAddress

        GroupIP = IPAddress.Parse("127.0.0.1")
        GroupEP = New IPEndPoint(GroupIP, 12345)
        SendUdp.JoinMulticastGroup(GroupIP, 12)

        Dim bteSendDate() As Byte

        Try
            bteSendDate = Encoding.Unicode.GetBytes("message")
            SendUdp.Send(bteSendDate, bteSendDate.Length, GroupEP)

        Catch ex As Exception
            Console.WriteLine(ex.Message)
        End Try


    End Sub
End Class