當前位置: 首頁>>代碼示例>>VB.NET>>正文

VB.NET Graphics.DrawCurve方法代碼示例

本文整理匯總了VB.NET中System.Drawing.Graphics.DrawCurve方法的典型用法代碼示例。如果您正苦於以下問題：VB.NET Graphics.DrawCurve方法的具體用法？VB.NET Graphics.DrawCurve怎麽用？VB.NET Graphics.DrawCurve使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類System.Drawing.Graphics的用法示例。


在下文中一共展示了Graphics.DrawCurve方法的8個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的VB.NET代碼示例。

示例1: DrawCurvePoint

Private Sub DrawCurvePoint(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Draw curve to screen.
    e.Graphics.DrawCurve(greenPen, curvePoints)
End Sub
開發者ID:VB.NET開發者，項目名稱:System.Drawing，代碼行數:23，代碼來源:Graphics.DrawCurve

示例2: DrawCurvePointF

Private Sub DrawCurvePointF(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Draw curve to screen.
    e.Graphics.DrawCurve(greenPen, curvePoints)
End Sub
開發者ID:VB.NET開發者，項目名稱:System.Drawing，代碼行數:23，代碼來源:Graphics.DrawCurve

示例3: DrawCurvePointTension

Private Sub DrawCurvePointTension(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Create tension.
    Dim tension As Single = 1.0F

    ' Draw curve to screen.
    e.Graphics.DrawCurve(greenPen, curvePoints, tension)
End Sub
開發者ID:VB.NET開發者，項目名稱:System.Drawing，代碼行數:26，代碼來源:Graphics.DrawCurve

示例4: DrawCurvePointFTension

Private Sub DrawCurvePointFTension(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Create tension.
    Dim tension As Single = 1.0F

    ' Draw curve to screen.
    e.Graphics.DrawCurve(greenPen, curvePoints, tension)
End Sub
開發者ID:VB.NET開發者，項目名稱:System.Drawing，代碼行數:26，代碼來源:Graphics.DrawCurve

示例5: DrawCurvePointFSegments

Private Sub DrawCurvePointFSegments(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Create offset and number of segments.
    Dim offset As Integer = 2
    Dim numSegments As Integer = 4

    ' Draw curve to screen.
    e.Graphics.DrawCurve(greenPen, curvePoints, offset, numSegments)
End Sub
開發者ID:VB.NET開發者，項目名稱:System.Drawing，代碼行數:27，代碼來源:Graphics.DrawCurve

示例6: DrawCurvePointSegmentTension

Private Sub DrawCurvePointSegmentTension(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Create offset, number of segments, and tension.
    Dim offset As Integer = 2
    Dim numSegments As Integer = 4
    Dim tension As Single = 1.0F

    ' Draw curve to screen.
    e.Graphics.DrawCurve(greenPen, curvePoints, offset, numSegments, _
    tension)
End Sub
開發者ID:VB.NET開發者，項目名稱:System.Drawing，代碼行數:29，代碼來源:Graphics.DrawCurve

示例7: DrawCurvePointFSegmentTension

Private Sub DrawCurvePointFSegmentTension(ByVal e As PaintEventArgs)

    ' Create pens.
    Dim redPen As New Pen(Color.Red, 3)
    Dim greenPen As New Pen(Color.Green, 3)

    ' Create points that define curve.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw lines between original points to screen.
    e.Graphics.DrawLines(redPen, curvePoints)

    ' Create offset, number of segments, and tension.
    Dim offset As Integer = 2
    Dim numSegments As Integer = 4
    Dim tension As Single = 1.0F

    ' Draw curve to screen.
    e.Graphics.DrawCurve(greenPen, curvePoints, offset, numSegments, _
    tension)
End Sub
開發者ID:VB.NET開發者，項目名稱:System.Drawing，代碼行數:29，代碼來源:Graphics.DrawCurve

示例8: DrawCurve

' 導入命名空間
Imports System.Drawing
Imports System.Drawing.Drawing2D
Imports System.Windows.Forms

public class DrawCurve
   public Shared Sub Main
        Application.Run(New Form1)
   End Sub
End class

public class Form1
  Inherits System.Windows.Forms.Form

  Protected Overrides Sub OnPaint(ByVal e As PaintEventArgs)
        Dim a As Graphics =  e.Graphics
        Dim mypen As Pen
        Dim mypoints(21) As PointF
        Dim i As Integer

        mypen = New Pen(System.Drawing.Color.Red, 3)

        For i = 0 To 9
            mypoints(i).X = 10 * i
            mypoints(i).Y = i * i * 3
        Next

        For i = 10 To 20
            mypoints(i).X = 10 * i
            mypoints(i).Y = (200 + i * i) / 15
        Next

        a = Me.CreateGraphics
        a.Clear(Me.BackColor)
        a.DrawCurve(mypen, mypoints)

        a.Dispose()
        mypen.Dispose()

  End Sub

  Public Sub New()
    MyBase.New()
    Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
    Me.ClientSize = New System.Drawing.Size(292, 273)
    Me.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen

  End Sub

End Class
開發者ID:VB程序員，項目名稱:System.Drawing，代碼行數:50，代碼來源:Graphics.DrawCurve


注：本文中的System.Drawing.Graphics.DrawCurve方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。