VB.NET Mutex構造函數代碼示例

' This example shows how a Mutex is used to synchronize access
' to a protected resource. Unlike Monitor, Mutex can be used with
' WaitHandle.WaitAll and WaitAny, and can be passed across
' AppDomain boundaries.
 
Imports System.Threading

Class Test
    ' Create a new Mutex. The creating thread does not own the
    ' Mutex.
    Private Shared mut As New Mutex()
    Private Const numIterations As Integer = 1
    Private Const numThreads As Integer = 3

    <MTAThread> _
    Shared Sub Main()
        ' Create the threads that will use the protected resource.
        Dim i As Integer
        For i = 1 To numThreads
            Dim myThread As New Thread(AddressOf MyThreadProc)
            myThread.Name = [String].Format("Thread{0}", i)
            myThread.Start()
        Next i

        ' The main thread exits, but the application continues to
        ' run until all foreground threads have exited.

    End Sub

    Private Shared Sub MyThreadProc()
        Dim i As Integer
        For i = 1 To numIterations
            UseResource()
        Next i
    End Sub

    ' This method represents a resource that must be synchronized
    ' so that only one thread at a time can enter.
    Private Shared Sub UseResource()
        ' Wait until it is safe to enter.
        mut.WaitOne()

        Console.WriteLine("{0} has entered protected area", _
            Thread.CurrentThread.Name)

        ' Place code to access non-reentrant resources here.

        ' Simulate some work
        Thread.Sleep(500)

        Console.WriteLine("{0} is leaving protected area" & vbCrLf, _
            Thread.CurrentThread.Name)

        ' Release Mutex.
        mut.ReleaseMutex()
    End Sub
End Class

' 導入命名空間
Imports System.Threading

Class Test
    ' Create a new Mutex. The creating thread owns the
    ' Mutex.
    Private Shared mut As New Mutex(True)
    Private Const numIterations As Integer = 1
    Private Const numThreads As Integer = 3

    <MTAThread> _
    Shared Sub Main()
        ' Create the threads that will use the protected resource.
        Dim i As Integer
        For i = 1 To numThreads
            Dim myThread As New Thread(AddressOf MyThreadProc)
            myThread.Name = [String].Format("Thread{0}", i)
            myThread.Start()
        Next i

        ' Wait one second before allowing other threads to
        ' acquire the Mutex.
        Console.WriteLine("Creating thread owns the Mutex.")
        Thread.Sleep(1000)

        Console.WriteLine("Creating thread releases the Mutex." & vbCrLf)
        mut.ReleaseMutex()
    End Sub

    Private Shared Sub MyThreadProc()
        Dim i As Integer
        For i = 1 To numIterations
            UseResource()
        Next i
    End Sub

    ' This method represents a resource that must be synchronized
    ' so that only one thread at a time can enter.
    Private Shared Sub UseResource()
        ' Wait until it is safe to enter.
        mut.WaitOne()

        Console.WriteLine("{0} has entered protected area", _
            Thread.CurrentThread.Name)

        ' Place code to access non-reentrant resources here.

        ' Simulate some work
        Thread.Sleep(500)

        Console.WriteLine("{0} is leaving protected area" & vbCrLf, _
            Thread.CurrentThread.Name)

        ' Release Mutex.
        mut.ReleaseMutex()
    End Sub
End Class

' 導入命名空間
Imports System.Threading

Public Class Test
   Public Shared Sub Main()
      ' Create the named mutex. Only one system object named 
      ' "MyMutex" can exist; the local Mutex object represents 
      ' this system object, regardless of which process or thread
      ' caused "MyMutex" to be created.
      Dim m As New Mutex(False, "MyMutex")
      
      ' Try to gain control of the named mutex. If the mutex is 
      ' controlled by another thread, wait for it to be released.        
      Console.WriteLine("Waiting for the Mutex.")
      m.WaitOne()
      
      ' Keep control of the mutex until the user presses
      ' ENTER.
      Console.WriteLine("This application owns the mutex. " _
          & "Press ENTER to release the mutex and exit.")
      Console.ReadLine()
      
      m.ReleaseMutex()
   End Sub 
End Class

' This example shows how a named mutex is used to signal between
' processes or threads.
' Run this program from two (or more) command windows. Each process
' creates a Mutex object that represents the named mutex "MyMutex".
' The named mutex is a system object whose lifetime is bounded by the
' lifetimes of the Mutex objects that represent it. The named mutex
' is created when the first process creates its local Mutex; in this
' example, the named mutex is owned by the first process. The named 
' mutex is destroyed when all the Mutex objects that represent it
' have been released. 
' The second process (and any subsequent process) waits for earlier
' processes to release the named mutex.

Imports System.Threading

Public Class Test
   
   <MTAThread> _
   Public Shared Sub Main()
      ' Set this variable to false if you do not want to request 
      ' initial ownership of the named mutex.
      Dim requestInitialOwnership As Boolean = True
      Dim mutexWasCreated As Boolean
      
      ' Request initial ownership of the named mutex by passing
      ' true for the first parameter. Only one system object named 
      ' "MyMutex" can exist; the local Mutex object represents 
      ' this system object. If "MyMutex" is created by this call,
      ' then mutexWasCreated contains true; otherwise, it contains
      ' false.
      Dim m As New Mutex(requestInitialOwnership, "MyMutex", _
          mutexWasCreated)
      
      ' This thread owns the mutex only if it both requested 
      ' initial ownership and created the named mutex. Otherwise,
      ' it can request the named mutex by calling WaitOne.
      If Not (requestInitialOwnership And mutexWasCreated) Then
         Console.WriteLine("Waiting for the named mutex.")
         m.WaitOne()
      End If
      
      ' Once the process has gained control of the named mutex,
      ' hold onto it until the user presses ENTER.
      Console.WriteLine("This process owns the named mutex. " _
          & "Press ENTER to release the mutex and exit.")
      Console.ReadLine()
      
      ' Call ReleaseMutex to allow other threads to gain control
      ' of the named mutex. If you keep a reference to the local
      ' Mutex, you can call WaitOne to request control of the 
      ' named mutex.
      m.ReleaseMutex()
   End Sub
End Class

' 導入命名空間
Imports System.Threading
Imports System.Security.AccessControl

Friend Class Example

    <MTAThread> _
    Friend Shared Sub Main()
        Const mutexName As String = "MutexExample4"

        Dim m As Mutex = Nothing
        Dim doesNotExist as Boolean = False
        Dim unauthorized As Boolean = False

        ' The value of this variable is set by the mutex
        ' constructor. It is True if the named system mutex was
        ' created, and False if the named mutex already existed.
        '
        Dim mutexWasCreated As Boolean

        ' Attempt to open the named mutex.
        Try
            ' Open the mutex with (MutexRights.Synchronize Or
            ' MutexRights.Modify), to enter and release the
            ' named mutex.
            '
            m = Mutex.OpenExisting(mutexName)
        Catch ex As WaitHandleCannotBeOpenedException
            Console.WriteLine("Mutex does not exist.")
            doesNotExist = True
        Catch ex As UnauthorizedAccessException
            Console.WriteLine("Unauthorized access: {0}", ex.Message)
            unauthorized = True
        End Try

        ' There are three cases: (1) The mutex does not exist.
        ' (2) The mutex exists, but the current user doesn't 
        ' have access. (3) The mutex exists and the user has
        ' access.
        '
        If doesNotExist Then
            ' The mutex does not exist, so create it.

            ' Create an access control list (ACL) that denies the
            ' current user the right to enter or release the 
            ' mutex, but allows the right to read and change
            ' security information for the mutex.
            '
            Dim user As String = Environment.UserDomainName _ 
                & "\" & Environment.UserName
            Dim mSec As New MutexSecurity()

            Dim rule As New MutexAccessRule(user, _
                MutexRights.Synchronize Or MutexRights.Modify, _
                AccessControlType.Deny)
            mSec.AddAccessRule(rule)

            rule = New MutexAccessRule(user, _
                MutexRights.ReadPermissions Or _
                MutexRights.ChangePermissions, _
                AccessControlType.Allow)
            mSec.AddAccessRule(rule)

            ' Create a Mutex object that represents the system
            ' mutex named by the constant 'mutexName', with
            ' initial ownership for this thread, and with the
            ' specified security access. The Boolean value that 
            ' indicates creation of the underlying system object
            ' is placed in mutexWasCreated.
            '
            m = New Mutex(True, mutexName, mutexWasCreated, mSec)

            ' If the named system mutex was created, it can be
            ' used by the current instance of this program, even 
            ' though the current user is denied access. The current
            ' program owns the mutex. Otherwise, exit the program.
            ' 
            If mutexWasCreated Then
                Console.WriteLine("Created the mutex.")
            Else
                Console.WriteLine("Unable to create the mutex.")
                Return
            End If

        ElseIf unauthorized Then

            ' Open the mutex to read and change the access control
            ' security. The access control security defined above
            ' allows the current user to do this.
            '
            Try
                m = Mutex.OpenExisting(mutexName, _
                    MutexRights.ReadPermissions Or _
                    MutexRights.ChangePermissions)

                ' Get the current ACL. This requires 
                ' MutexRights.ReadPermissions.
                Dim mSec As MutexSecurity = m.GetAccessControl()
                
                Dim user As String = Environment.UserDomainName _ 
                    & "\" & Environment.UserName

                ' First, the rule that denied the current user 
                ' the right to enter and release the mutex must
                ' be removed.
                Dim rule As New MutexAccessRule(user, _
                    MutexRights.Synchronize Or MutexRights.Modify, _
                    AccessControlType.Deny)
                mSec.RemoveAccessRule(rule)

                ' Now grant the user the correct rights.
                ' 
                rule = New MutexAccessRule(user, _
                    MutexRights.Synchronize Or MutexRights.Modify, _
                    AccessControlType.Allow)
                mSec.AddAccessRule(rule)

                ' Update the ACL. This requires
                ' MutexRights.ChangePermissions.
                m.SetAccessControl(mSec)

                Console.WriteLine("Updated mutex security.")

                ' Open the mutex with (MutexRights.Synchronize 
                ' Or MutexRights.Modify), the rights required to
                ' enter and release the mutex.
                '
                m = Mutex.OpenExisting(mutexName)

            Catch ex As UnauthorizedAccessException
                Console.WriteLine("Unable to change permissions: {0}", _
                    ex.Message)
                Return
            End Try

        End If

        ' If this program created the mutex, it already owns
        ' the mutex.
        '
        If Not mutexWasCreated Then
            ' Enter the mutex, and hold it until the program
            ' exits.
            '
            Try
                Console.WriteLine("Wait for the mutex.")
                m.WaitOne()
                Console.WriteLine("Entered the mutex.")
            Catch ex As UnauthorizedAccessException
                Console.WriteLine("Unauthorized access: {0}", _
                    ex.Message)
            End Try
        End If

        Console.WriteLine("Press the Enter key to exit.")
        Console.ReadLine()
        m.ReleaseMutex()
        m.Dispose()
    End Sub 
End Class