當前位置: 首頁>>代碼示例>>TypeScript>>正文


TypeScript ZipFile.once方法代碼示例

本文整理匯總了TypeScript中yauzl.ZipFile.once方法的典型用法代碼示例。如果您正苦於以下問題:TypeScript ZipFile.once方法的具體用法?TypeScript ZipFile.once怎麽用?TypeScript ZipFile.once使用的例子?那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在yauzl.ZipFile的用法示例。


在下文中一共展示了ZipFile.once方法的7個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的TypeScript代碼示例。

示例1: TPromise

    return new TPromise((c, e) => {
        const throttler = new SimpleThrottler();
        let last = TPromise.as<any>(null);

        zipfile.once('error', e);
        zipfile.once('close', () => last.then(c, e));
        zipfile.on('entry', (entry: Entry) => {
            if (!options.sourcePathRegex.test(entry.fileName)) {
                return;
            }

            const fileName = entry.fileName.replace(options.sourcePathRegex, '');

            // directory file names end with '/'
            if (/\/$/.test(fileName)) {
                const targetFileName = path.join(targetPath, fileName);
                last = mkdirp(targetFileName);
                return;
            }

            const stream = ninvoke(zipfile, zipfile.openReadStream, entry);
            const mode = modeFromEntry(entry);

            last = throttler.queue(() => stream.then(stream => extractEntry(stream, fileName, mode, targetPath, options)));
        });
    });
開發者ID:AlexxNica,項目名稱:sqlopsstudio,代碼行數:26,代碼來源:zip.ts

示例2: Promise

    return new Promise((c, e) => {
        const promises: Promise[] = [];

        zipfile.once('error', e);
        zipfile.on('entry', (entry: Entry) => {
            if (!options.sourcePathRegex.test(entry.fileName)) {
                return;
            }

            promises.push(extractEntry(zipfile, entry, targetPath, options));
        });
        zipfile.once('close', () => Promise.join(promises).done(c, e));
    });
開發者ID:gaoxiaojun,項目名稱:vscode,代碼行數:13,代碼來源:zip.ts

示例3: Promise

    return new Promise((c, e) => {
        const throttler = new Sequencer();

        const readNextEntry = (token: CancellationToken) => {
            if (token.isCancellationRequested) {
                return;
            }

            extractedEntriesCount++;
            zipfile.readEntry();
        };

        zipfile.once('error', e);
        zipfile.once('close', () => last.then(() => {
            if (token.isCancellationRequested || zipfile.entryCount === extractedEntriesCount) {
                c();
            } else {
                e(new ExtractError('Incomplete', new Error(nls.localize('incompleteExtract', "Incomplete. Found {0} of {1} entries", extractedEntriesCount, zipfile.entryCount))));
            }
        }, e));
        zipfile.readEntry();
        zipfile.on('entry', (entry: Entry) => {

            if (token.isCancellationRequested) {
                return;
            }

            if (!options.sourcePathRegex.test(entry.fileName)) {
                readNextEntry(token);
                return;
            }

            const fileName = entry.fileName.replace(options.sourcePathRegex, '');

            // directory file names end with '/'
            if (/\/$/.test(fileName)) {
                const targetFileName = path.join(targetPath, fileName);
                last = createCancelablePromise(token => mkdirp(targetFileName, undefined, token).then(() => readNextEntry(token)).then(undefined, e));
                return;
            }

            const stream = ninvoke(zipfile, zipfile.openReadStream, entry);
            const mode = modeFromEntry(entry);

            last = createCancelablePromise(token => throttler.queue(() => stream.then(stream => extractEntry(stream, fileName, mode, targetPath, options, token).then(() => readNextEntry(token)))).then(null!, e));
        });
    });
開發者ID:joelday,項目名稱:vscode,代碼行數:47,代碼來源:zip.ts

示例4: Promise

    return new Promise((c, e) => {
        const promiseFactory: { (): Promise; }[] = [];

        zipfile.once('error', e);
        zipfile.once('close', () => sequence(promiseFactory).then(c, e));
        zipfile.on('entry', (entry: Entry) => {
            if (!options.sourcePathRegex.test(entry.fileName)) {
                return;
            }

            const stream = ninvoke(zipfile, zipfile.openReadStream, entry);
            const fileName = entry.fileName.replace(options.sourcePathRegex, '');
            const mode = modeFromEntry(entry);

            promiseFactory.push(() => stream.then(stream => extractEntry(stream, fileName, mode, targetPath, options)));
        });
    });
開發者ID:chunseoklee,項目名稱:vscode,代碼行數:17,代碼來源:zip.ts

示例5: c

        return new TPromise<Readable>((c, e) => {
            zipfile.on('entry', (entry: Entry) => {
                if (entry.fileName === filePath) {
                    ninvoke<Readable>(zipfile, zipfile.openReadStream, entry).done(stream => c(stream), err => e(err));
                }
            });

            zipfile.once('close', () => e(new Error(nls.localize('notFound', "{0} not found inside zip.", filePath))));
        });
開發者ID:AlexxNica,項目名稱:sqlopsstudio,代碼行數:9,代碼來源:zip.ts

示例6: Promise

    return new Promise((c, e) => {
        const throttler = new SimpleThrottler();
        let last = TPromise.as(null);

        zipfile.once('error', e);
        zipfile.once('close', () => last.then(c, e));
        zipfile.on('entry', (entry: Entry) => {
            if (!options.sourcePathRegex.test(entry.fileName)) {
                return;
            }

            const stream = ninvoke(zipfile, zipfile.openReadStream, entry);
            const fileName = entry.fileName.replace(options.sourcePathRegex, '');
            const mode = modeFromEntry(entry);

            last = throttler.queue(() => stream.then(stream => extractEntry(stream, fileName, mode, targetPath, options)));
        });
    });
開發者ID:ttracx,項目名稱:vscode,代碼行數:18,代碼來源:zip.ts

示例7: TPromise

    return new TPromise((c, e) => {
        const throttler = new SimpleThrottler();

        const readNextEntry = () => {
            extractedEntriesCount++;
            zipfile.readEntry();
        };

        zipfile.once('error', e);
        zipfile.once('close', () => last.then(() => {
            if (isCanceled || zipfile.entryCount === extractedEntriesCount) {
                c(null);
            } else {
                e(new ExtractError('Incomplete', new Error(nls.localize('incompleteExtract', "Incomplete. Found {0} of {1} entries", extractedEntriesCount, zipfile.entryCount))));
            }
        }, e));
        zipfile.readEntry();
        zipfile.on('entry', (entry: Entry) => {
            logService.debug(targetPath, 'Found', entry.fileName);

            if (isCanceled) {
                return;
            }

            if (!options.sourcePathRegex.test(entry.fileName)) {
                readNextEntry();
                return;
            }

            const fileName = entry.fileName.replace(options.sourcePathRegex, '');

            // directory file names end with '/'
            if (/\/$/.test(fileName)) {
                const targetFileName = path.join(targetPath, fileName);
                last = mkdirp(targetFileName).then(() => readNextEntry());
                return;
            }

            const stream = ninvoke(zipfile, zipfile.openReadStream, entry);
            const mode = modeFromEntry(entry);

            last = throttler.queue(() => stream.then(stream => extractEntry(stream, fileName, mode, targetPath, options).then(() => readNextEntry())));
        });
    }, () => {
開發者ID:jumpinjackie,項目名稱:sqlopsstudio,代碼行數:44,代碼來源:zip.ts


注:本文中的yauzl.ZipFile.once方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台,相關代碼片段篩選自各路編程大神貢獻的開源項目,源碼版權歸原作者所有,傳播和使用請參考對應項目的License;未經允許,請勿轉載。