TypeScript cursorCommon.ICursorSimpleModel類代碼示例

本文整理匯總了TypeScript中vs/editor/common/controller/cursorCommon.ICursorSimpleModel類的典型用法代碼示例。如果您正苦於以下問題：TypeScript ICursorSimpleModel類的具體用法？TypeScript ICursorSimpleModel怎麽用？TypeScript ICursorSimpleModel使用的例子？那麽, 這裏精選的類代碼示例或許可以為您提供幫助。

在下文中一共展示了ICursorSimpleModel類的10個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的TypeScript代碼示例。

示例1: moveToEndOfLine

	public static moveToEndOfLine(config: CursorConfiguration, model: ICursorSimpleModel, cursor: SingleCursorState, inSelectionMode: boolean): SingleCursorState {
		let lineNumber = cursor.position.lineNumber;
		let maxColumn = model.getLineMaxColumn(lineNumber);
		return cursor.move(inSelectionMode, lineNumber, maxColumn, 0);
	}

開發者ID:AllureFer，項目名稱:vscode，代碼行數:5，代碼來源:cursorMoveOperations.ts

示例2: word

	public static word(config: CursorConfiguration, model: ICursorSimpleModel, cursor: SingleCursorState, inSelectionMode: boolean, position: Position): SingleCursorState {
		const wordSeparators = getMapForWordSeparators(config.wordSeparators);
		let prevWord = WordOperations._findPreviousWordOnLine(wordSeparators, model, position);
		let nextWord = WordOperations._findNextWordOnLine(wordSeparators, model, position);

		if (!inSelectionMode) {
			// Entering word selection for the first time
			const isTouchingPrevWord = (prevWord && prevWord.wordType === WordType.Regular && prevWord.start <= position.column - 1 && position.column - 1 <= prevWord.end);
			const isTouchingNextWord = (nextWord && nextWord.wordType === WordType.Regular && nextWord.start <= position.column - 1 && position.column - 1 <= nextWord.end);

			let startColumn: number;
			let endColumn: number;

			if (isTouchingPrevWord) {
				startColumn = prevWord.start + 1;
				endColumn = prevWord.end + 1;
			} else if (isTouchingNextWord) {
				startColumn = nextWord.start + 1;
				endColumn = nextWord.end + 1;
			} else {
				if (prevWord) {
					startColumn = prevWord.end + 1;
				} else {
					startColumn = 1;
				}
				if (nextWord) {
					endColumn = nextWord.start + 1;
				} else {
					endColumn = model.getLineMaxColumn(position.lineNumber);
				}
			}

			return new SingleCursorState(
				new Range(position.lineNumber, startColumn, position.lineNumber, endColumn), 0,
				new Position(position.lineNumber, endColumn), 0
			);
		}

		const isInsidePrevWord = (prevWord && prevWord.wordType === WordType.Regular && prevWord.start < position.column - 1 && position.column - 1 < prevWord.end);
		const isInsideNextWord = (nextWord && nextWord.wordType === WordType.Regular && nextWord.start < position.column - 1 && position.column - 1 < nextWord.end);

		let startColumn: number;
		let endColumn: number;

		if (isInsidePrevWord) {
			startColumn = prevWord.start + 1;
			endColumn = prevWord.end + 1;
		} else if (isInsideNextWord) {
			startColumn = nextWord.start + 1;
			endColumn = nextWord.end + 1;
		} else {
			startColumn = position.column;
			endColumn = position.column;
		}

		let lineNumber = position.lineNumber;
		let column: number;
		if (cursor.selectionStart.containsPosition(position)) {
			column = cursor.selectionStart.endColumn;
		} else if (position.isBeforeOrEqual(cursor.selectionStart.getStartPosition())) {
			column = startColumn;
			let possiblePosition = new Position(lineNumber, column);
			if (cursor.selectionStart.containsPosition(possiblePosition)) {
				column = cursor.selectionStart.endColumn;
			}
		} else {
			column = endColumn;
			let possiblePosition = new Position(lineNumber, column);
			if (cursor.selectionStart.containsPosition(possiblePosition)) {
				column = cursor.selectionStart.startColumn;
			}
		}

		return cursor.move(true, lineNumber, column, 0);
	}

開發者ID:developers23，項目名稱:vscode，代碼行數:75，代碼來源:cursorWordOperations.ts

示例3: _findPreviousWordOnLine

	private static _findPreviousWordOnLine(wordSeparators: WordCharacterClassifier, model: ICursorSimpleModel, position: Position): IFindWordResult {
		let lineContent = model.getLineContent(position.lineNumber);
		return this._doFindPreviousWordOnLine(lineContent, wordSeparators, position);
	}

開發者ID:developers23，項目名稱:vscode，代碼行數:4，代碼來源:cursorWordOperations.ts

示例4: deleteWordRight

	public static deleteWordRight(wordSeparators: WordCharacterClassifier, model: ICursorSimpleModel, selection: Selection, whitespaceHeuristics: boolean, wordNavigationType: WordNavigationType): Range {
		if (!selection.isEmpty()) {
			return selection;
		}

		const position = new Position(selection.positionLineNumber, selection.positionColumn);

		let lineNumber = position.lineNumber;
		let column = position.column;

		const lineCount = model.getLineCount();
		const maxColumn = model.getLineMaxColumn(lineNumber);
		if (lineNumber === lineCount && column === maxColumn) {
			// Ignore deleting at end of file
			return null;
		}

		if (whitespaceHeuristics) {
			let r = this._deleteWordRightWhitespace(model, position);
			if (r) {
				return r;
			}
		}

		let nextWordOnLine = WordOperations._findNextWordOnLine(wordSeparators, model, position);

		if (wordNavigationType === WordNavigationType.WordEnd) {
			if (nextWordOnLine) {
				column = nextWordOnLine.end + 1;
			} else {
				if (column < maxColumn || lineNumber === lineCount) {
					column = maxColumn;
				} else {
					lineNumber++;
					nextWordOnLine = WordOperations._findNextWordOnLine(wordSeparators, model, new Position(lineNumber, 1));
					if (nextWordOnLine) {
						column = nextWordOnLine.start + 1;
					} else {
						column = model.getLineMaxColumn(lineNumber);
					}
				}
			}
		} else {
			if (nextWordOnLine && column >= nextWordOnLine.start + 1) {
				nextWordOnLine = WordOperations._findNextWordOnLine(wordSeparators, model, new Position(lineNumber, nextWordOnLine.end + 1));
			}
			if (nextWordOnLine) {
				column = nextWordOnLine.start + 1;
			} else {
				if (column < maxColumn || lineNumber === lineCount) {
					column = maxColumn;
				} else {
					lineNumber++;
					nextWordOnLine = WordOperations._findNextWordOnLine(wordSeparators, model, new Position(lineNumber, 1));
					if (nextWordOnLine) {
						column = nextWordOnLine.start + 1;
					} else {
						column = model.getLineMaxColumn(lineNumber);
					}
				}
			}
		}

		return new Range(lineNumber, column, position.lineNumber, position.column);
	}

開發者ID:developers23，項目名稱:vscode，代碼行數:65，代碼來源:cursorWordOperations.ts

示例5: moveToEndOfBuffer

	public static moveToEndOfBuffer(config: CursorConfiguration, model: ICursorSimpleModel, cursor: SingleCursorState, inSelectionMode: boolean): SingleCursorState {
		let lastLineNumber = model.getLineCount();
		let lastColumn = model.getLineMaxColumn(lastLineNumber);

		return cursor.move(inSelectionMode, lastLineNumber, lastColumn, 0);
	}

開發者ID:KTXSoftware，項目名稱:KodeStudio，代碼行數:6，代碼來源:cursorMoveOperations.ts

示例6: cut

	public static cut(config: CursorConfiguration, model: ICursorSimpleModel, selections: Selection[]): EditOperationResult {
		let commands: (ICommand | null)[] = [];
		for (let i = 0, len = selections.length; i < len; i++) {
			const selection = selections[i];

			if (selection.isEmpty()) {
				if (config.emptySelectionClipboard) {
					// This is a full line cut

					let position = selection.getPosition();

					let startLineNumber: number,
						startColumn: number,
						endLineNumber: number,
						endColumn: number;

					if (position.lineNumber < model.getLineCount()) {
						// Cutting a line in the middle of the model
						startLineNumber = position.lineNumber;
						startColumn = 1;
						endLineNumber = position.lineNumber + 1;
						endColumn = 1;
					} else if (position.lineNumber > 1) {
						// Cutting the last line & there are more than 1 lines in the model
						startLineNumber = position.lineNumber - 1;
						startColumn = model.getLineMaxColumn(position.lineNumber - 1);
						endLineNumber = position.lineNumber;
						endColumn = model.getLineMaxColumn(position.lineNumber);
					} else {
						// Cutting the single line that the model contains
						startLineNumber = position.lineNumber;
						startColumn = 1;
						endLineNumber = position.lineNumber;
						endColumn = model.getLineMaxColumn(position.lineNumber);
					}

					let deleteSelection = new Range(
						startLineNumber,
						startColumn,
						endLineNumber,
						endColumn
					);

					if (!deleteSelection.isEmpty()) {
						commands[i] = new ReplaceCommand(deleteSelection, '');
					} else {
						commands[i] = null;
					}
				} else {
					// Cannot cut empty selection
					commands[i] = null;
				}
			} else {
				commands[i] = new ReplaceCommand(selection, '');
			}
		}
		return new EditOperationResult(EditOperationType.Other, commands, {
			shouldPushStackElementBefore: true,
			shouldPushStackElementAfter: true
		});
	}

開發者ID:DonJayamanne，項目名稱:vscode，代碼行數:61，代碼來源:cursorDeleteOperations.ts

示例7: moveToEndOfBuffer

	public static moveToEndOfBuffer(config: CursorConfiguration, model: ICursorSimpleModel, cursor: SingleCursorState, inSelectionMode: boolean): SingleMoveOperationResult {
		let lastLineNumber = model.getLineCount();
		let lastColumn = model.getLineMaxColumn(lastLineNumber);

		return SingleMoveOperationResult.fromMove(cursor, inSelectionMode, lastLineNumber, lastColumn, 0, true, CursorChangeReason.Explicit);
	}

開發者ID:StateFarmIns，項目名稱:vscode，代碼行數:6，代碼來源:cursorMoveOperations.ts

示例8: moveToEndOfLine

	public static moveToEndOfLine(config: CursorConfiguration, model: ICursorSimpleModel, cursor: SingleCursorState, inSelectionMode: boolean): SingleMoveOperationResult {
		let lineNumber = cursor.position.lineNumber;
		let maxColumn = model.getLineMaxColumn(lineNumber);
		return SingleMoveOperationResult.fromMove(cursor, inSelectionMode, lineNumber, maxColumn, 0, true, CursorChangeReason.Explicit);
	}

開發者ID:StateFarmIns，項目名稱:vscode，代碼行數:5，代碼來源:cursorMoveOperations.ts

示例9: findPreviousWordOnLine

	public static findPreviousWordOnLine(config: CursorConfiguration, model: ICursorSimpleModel, position: Position): IFindWordResult {
		let wordSeparators = getMapForWordSeparators(config.wordSeparators);
		let lineContent = model.getLineContent(position.lineNumber);
		return this._findPreviousWordOnLine(lineContent, wordSeparators, position);
	}

開發者ID:StateFarmIns，項目名稱:vscode，代碼行數:5，代碼來源:cursorWordOperations.ts

示例10: isLastLineVisibleInViewPort

	// -- view
	public isLastLineVisibleInViewPort(): boolean {
		return this.viewModel.getLineCount() <= this.getCompletelyVisibleViewLinesRangeInViewport().getEndPosition().lineNumber;
	}

開發者ID:yuit，項目名稱:vscode，代碼行數:4，代碼來源:oneCursor.ts

注：本文中的vs/editor/common/controller/cursorCommon.ICursorSimpleModel類示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。