Python unittest.installHandler方法代碼示例

本文整理匯總了Python中unittest.installHandler方法的典型用法代碼示例。如果您正苦於以下問題：Python unittest.installHandler方法的具體用法？Python unittest.installHandler怎麽用？Python unittest.installHandler使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類unittest的用法示例。

在下文中一共展示了unittest.installHandler方法的6個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。

示例1: testInterruptCaught

# 需要導入模塊: import unittest [as 別名]
# 或者: from unittest import installHandler [as 別名]
def testInterruptCaught(self):
        default_handler = signal.getsignal(signal.SIGINT)

        result = unittest.TestResult()
        unittest.installHandler()
        unittest.registerResult(result)

        self.assertNotEqual(signal.getsignal(signal.SIGINT), default_handler)

        def test(result):
            pid = os.getpid()
            os.kill(pid, signal.SIGINT)
            result.breakCaught = True
            self.assertTrue(result.shouldStop)

        try:
            test(result)
        except KeyboardInterrupt:
            self.fail("KeyboardInterrupt not handled")
        self.assertTrue(result.breakCaught)

開發者ID:war-and-code，項目名稱:jawfish，代碼行數:22，代碼來源:test_break.py

示例2: testSecondInterrupt

# 需要導入模塊: import unittest [as 別名]
# 或者: from unittest import installHandler [as 別名]
def testSecondInterrupt(self):
        result = unittest.TestResult()
        unittest.installHandler()
        unittest.registerResult(result)

        def test(result):
            pid = os.getpid()
            os.kill(pid, signal.SIGINT)
            result.breakCaught = True
            self.assertTrue(result.shouldStop)
            os.kill(pid, signal.SIGINT)
            self.fail("Second KeyboardInterrupt not raised")

        try:
            test(result)
        except KeyboardInterrupt:
            pass
        else:
            self.fail("Second KeyboardInterrupt not raised")
        self.assertTrue(result.breakCaught)

開發者ID:war-and-code，項目名稱:jawfish，代碼行數:22，代碼來源:test_break.py

示例3: testTwoResults

# 需要導入模塊: import unittest [as 別名]
# 或者: from unittest import installHandler [as 別名]
def testTwoResults(self):
        unittest.installHandler()

        result = unittest.TestResult()
        unittest.registerResult(result)
        new_handler = signal.getsignal(signal.SIGINT)

        result2 = unittest.TestResult()
        unittest.registerResult(result2)
        self.assertEqual(signal.getsignal(signal.SIGINT), new_handler)

        result3 = unittest.TestResult()

        def test(result):
            pid = os.getpid()
            os.kill(pid, signal.SIGINT)

        try:
            test(result)
        except KeyboardInterrupt:
            self.fail("KeyboardInterrupt not handled")

        self.assertTrue(result.shouldStop)
        self.assertTrue(result2.shouldStop)
        self.assertFalse(result3.shouldStop)

開發者ID:war-and-code，項目名稱:jawfish，代碼行數:27，代碼來源:test_break.py

示例4: testHandlerReplacedButCalled

# 需要導入模塊: import unittest [as 別名]
# 或者: from unittest import installHandler [as 別名]
def testHandlerReplacedButCalled(self):
        # If our handler has been replaced (is no longer installed) but is
        # called by the *new* handler, then it isn't safe to delay the
        # SIGINT and we should immediately delegate to the default handler
        unittest.installHandler()

        handler = signal.getsignal(signal.SIGINT)
        def new_handler(frame, signum):
            handler(frame, signum)
        signal.signal(signal.SIGINT, new_handler)

        try:
            pid = os.getpid()
            os.kill(pid, signal.SIGINT)
        except KeyboardInterrupt:
            pass
        else:
            self.fail("replaced but delegated handler doesn't raise interrupt")

開發者ID:war-and-code，項目名稱:jawfish，代碼行數:20，代碼來源:test_break.py

示例5: testSecondInterrupt

# 需要導入模塊: import unittest [as 別名]
# 或者: from unittest import installHandler [as 別名]
def testSecondInterrupt(self):
        # Can't use skipIf decorator because the signal handler may have
        # been changed after defining this method.
        if signal.getsignal(signal.SIGINT) == signal.SIG_IGN:
            self.skipTest("test requires SIGINT to not be ignored")
        result = unittest.TestResult()
        unittest.installHandler()
        unittest.registerResult(result)

        def test(result):
            pid = os.getpid()
            os.kill(pid, signal.SIGINT)
            result.breakCaught = True
            self.assertTrue(result.shouldStop)
            os.kill(pid, signal.SIGINT)
            self.fail("Second KeyboardInterrupt not raised")

        try:
            test(result)
        except KeyboardInterrupt:
            pass
        else:
            self.fail("Second KeyboardInterrupt not raised")
        self.assertTrue(result.breakCaught)

開發者ID:IronLanguages，項目名稱:ironpython2，代碼行數:26，代碼來源:test_break.py

示例6: testHandlerReplacedButCalled

# 需要導入模塊: import unittest [as 別名]
# 或者: from unittest import installHandler [as 別名]
def testHandlerReplacedButCalled(self):
        # Can't use skipIf decorator because the signal handler may have
        # been changed after defining this method.
        if signal.getsignal(signal.SIGINT) == signal.SIG_IGN:
            self.skipTest("test requires SIGINT to not be ignored")
        # If our handler has been replaced (is no longer installed) but is
        # called by the *new* handler, then it isn't safe to delay the
        # SIGINT and we should immediately delegate to the default handler
        unittest.installHandler()

        handler = signal.getsignal(signal.SIGINT)
        def new_handler(frame, signum):
            handler(frame, signum)
        signal.signal(signal.SIGINT, new_handler)

        try:
            pid = os.getpid()
            os.kill(pid, signal.SIGINT)
        except KeyboardInterrupt:
            pass
        else:
            self.fail("replaced but delegated handler doesn't raise interrupt")

開發者ID:IronLanguages，項目名稱:ironpython2，代碼行數:24，代碼來源:test_break.py

注：本文中的unittest.installHandler方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。