本文整理匯總了Python中serial.win32.EscapeCommFunction方法的典型用法代碼示例。如果您正苦於以下問題：Python win32.EscapeCommFunction方法的具體用法？Python win32.EscapeCommFunction怎麽用？Python win32.EscapeCommFunction使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類serial.win32的用法示例。
在下文中一共展示了win32.EscapeCommFunction方法的10個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Python代碼示例。
示例1: _update_rts_state
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def _update_rts_state(self):
"""Set terminal status line: Request To Send"""
if self._rts_state:
win32.EscapeCommFunction(self._port_handle, win32.SETRTS)
else:
win32.EscapeCommFunction(self._port_handle, win32.CLRRTS) 示例2: _update_dtr_state
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def _update_dtr_state(self):
"""Set terminal status line: Data Terminal Ready"""
if self._dtr_state:
win32.EscapeCommFunction(self._port_handle, win32.SETDTR)
else:
win32.EscapeCommFunction(self._port_handle, win32.CLRDTR) 示例3: set_output_flow_control
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def set_output_flow_control(self, enable=True):
"""\
Manually control flow - when software flow control is enabled.
This will do the same as if XON (true) or XOFF (false) are received
from the other device and control the transmission accordingly.
WARNING: this function is not portable to different platforms!
"""
if not self._port_handle:
raise portNotOpenError
if enable:
win32.EscapeCommFunction(self._port_handle, win32.SETXON)
else:
win32.EscapeCommFunction(self._port_handle, win32.SETXOFF) 示例4: setRTS
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def setRTS(self, level=1):
"""Set terminal status line: Request To Send"""
# remember level for reconfigure
if level:
self._rtsState = win32.RTS_CONTROL_ENABLE
else:
self._rtsState = win32.RTS_CONTROL_DISABLE
# also apply now if port is open
if self.hComPort:
if level:
win32.EscapeCommFunction(self.hComPort, win32.SETRTS)
else:
win32.EscapeCommFunction(self.hComPort, win32.CLRRTS) 示例5: setDTR
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def setDTR(self, level=1):
"""Set terminal status line: Data Terminal Ready"""
# remember level for reconfigure
if level:
self._dtrState = win32.DTR_CONTROL_ENABLE
else:
self._dtrState = win32.DTR_CONTROL_DISABLE
# also apply now if port is open
if self.hComPort:
if level:
win32.EscapeCommFunction(self.hComPort, win32.SETDTR)
else:
win32.EscapeCommFunction(self.hComPort, win32.CLRDTR) 示例6: setXON
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def setXON(self, level=True):
"""\
Manually control flow - when software flow control is enabled.
This will send XON (true) and XOFF (false) to the other device.
WARNING: this function is not portable to different platforms!
"""
if not self.hComPort: raise portNotOpenError
if level:
win32.EscapeCommFunction(self.hComPort, win32.SETXON)
else:
win32.EscapeCommFunction(self.hComPort, win32.SETXOFF) 示例7: set_output_flow_control
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def set_output_flow_control(self, enable=True):
"""\
Manually control flow - when software flow control is enabled.
This will do the same as if XON (true) or XOFF (false) are received
from the other device and control the transmission accordingly.
WARNING: this function is not portable to different platforms!
"""
if not self.is_open:
raise portNotOpenError
if enable:
win32.EscapeCommFunction(self._port_handle, win32.SETXON)
else:
win32.EscapeCommFunction(self._port_handle, win32.SETXOFF) 示例8: setRTS
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def setRTS(self, level=1):
"""Set terminal status line: Request To Send"""
if not self.hComPort: raise portNotOpenError
if level:
self._rtsState = win32.RTS_CONTROL_ENABLE
win32.EscapeCommFunction(self.hComPort, win32.SETRTS)
else:
self._rtsState = win32.RTS_CONTROL_DISABLE
win32.EscapeCommFunction(self.hComPort, win32.CLRRTS) 示例9: setDTR
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def setDTR(self, level=1):
"""Set terminal status line: Data Terminal Ready"""
if not self.hComPort: raise portNotOpenError
if level:
self._dtrState = win32.DTR_CONTROL_ENABLE
win32.EscapeCommFunction(self.hComPort, win32.SETDTR)
else:
self._dtrState = win32.DTR_CONTROL_DISABLE
win32.EscapeCommFunction(self.hComPort, win32.CLRDTR) 示例10: setXON
# 需要導入模塊: from serial import win32 [as 別名]
# 或者: from serial.win32 import EscapeCommFunction [as 別名]
def setXON(self, level=True):
"""Platform specific - set flow state."""
if not self.hComPort: raise portNotOpenError
if level:
win32.EscapeCommFunction(self.hComPort, win32.SETXON)
else:
win32.EscapeCommFunction(self.hComPort, win32.SETXOFF)