Python serial.Serial方法代碼示例

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def __init__(self, port, baud_rate, debug='off', sector_size=DEFAULT_SECTOR_SIZE, page_size=DEFAULT_PAGE_SIZE):
        self.sector_size = sector_size
        self.page_size = page_size
        self.pages_per_sector = self.sector_size // self.page_size

        if debug == 'normal':
            self.debug = DEBUG_NORMAL
        elif debug == 'verbose':
            self.debug = DEBUG_VERBOSE
        else:  # off
            self.debug = 0

        self._debug('Opening serial connection')
        self.sock = serial.Serial(port, baud_rate, timeout=1)
        self._debug('Serial connection opened successfully')

        time.sleep(2)  # Wait for the Arduino bootloader 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def open(self):
    self.lock.acquire()
    self.ser = serial.Serial(self.devname,baudrate=self.baud,timeout=2)
    self.ser.flushInput()
    self.ser.write('ANCNFG 0\r\n')
    self.lock.release()
    if self.mode == "analog":
      self.set_mode_analog()
    elif self.mode == "serial":
      self.set_mode_serial()
    else:
      raise AttributeError("No such mode: "+str(self.mode))
    self.lock.acquire()
    self.ser.write('EN\r\n')
    self.ser.write('MH\r\n')
    self.lock.release() 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def __init__(self, dev=None):
        # pyserial 3.x has min requirement python2.7
        # read() returns string in 2.7, bytes object otherwise
        if sys.version_info[0] < 3:
            if sys.version_info[1] < 7:
                raise ValueError('This library is based on pyserial v3.x. Python 2.7 or higher is required.')
            self._version = 2
            self._ubox_synch = '\xb5b'
        else:
            self._version = 3
            self._ubox_synch = ['b5', '62']

        if(dev):
            self.dev = dev
        else:
            self.dev = serial.Serial(timeout=1)

        try:
            if(self._dev.open):
                self.baudrate = dev.baudrate
        except AttributeError:
            print("Serial Port is closed; open before using.") 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def read(self):
        """
        Midi Serial Read.(In)
        :return: Midi message
        """
        msg = [None, None, None]
        for i in range(len(msg)):
            raw_byte = self.ser.read()
            if not raw_byte:
                return
            byte_value = ord(raw_byte)
            if byte_value in [248, 250, 252]:
                return byte_value
            else:
                msg[i] = byte_value
        return msg 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def connect(parameter):
    # Connecting
    print ("Welcome to serial-init")
    print ("------------------------------------------")
    print ("Establishing connection to serial port:")
    try:
        #print ("TEST", baudrate,parity,bytesize,stopbits,timeout)
        ser = serial.Serial(port, baudrate=baudrate, parity=parity, bytesize=bytesize, stopbits=stopbits, timeout=timeout)
        print('.... Connection made.')
    except: 
        print('.... Connection flopped.')
        print('--- Aborting ---')
        sys.exit(2)
    print('')

    return ser 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def __init__(self, port, baud, timeout):
        self._port = port
        self._baud = baud
        self._timeout = timeout
        self.serial_rx_queue = Queue.Queue()  # Infinite
        self.serial_tx_queue = Queue.Queue()  # Infinite
        self.enabled = True
        try:
            self.ser = serial.Serial(port, baud, timeout=timeout)
        except serial.SerialException as e:
            logger.error(e)
            sys.exit(1)  # Sys.exit(1) is an error

        #Start
        threading.Thread.__init__(self)
        self.start()  #Starts the run() function and thread 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def main():
    try:
        # Open serial port
        ser = serial.Serial('/dev/ttys009', 9600)

        # Create XBee Series 1 object
        xbee = XBee(ser, callback=handle_data)

        while True:
            yield gen.sleep(1)
            # Send AT packet
            xbee.send('at', frame_id='B', command='DL')
    except KeyboardInterrupt:
        ioloop.IOLoop.current().stop()
    finally:
        xbee.halt()
        ser.close() 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def __init__(self, *args):

    kwargs = args[0]  # Because one cannot pass multiple kwargs when creating
    #  a process...

    for key, value in kwargs.items():
      setattr(self, key, value)
    self.arduino_ser = serial.Serial(port=self.port,
                                     baudrate=self.baudrate)

    self.collect_serial_queue = Queue_threading()  # To collect serial
    self.submit_serial_queue = Queue_threading()  # To send in serial

    # A thread that runs independently to collect serial port continuously.
    self.collect_serial_threaded = Thread(target=collect_serial,
                                          args=(self.arduino_ser,
                                                self.collect_serial_queue))
    self.collect_serial_threaded.daemon = True
    self.init_main_window()
    self.collect_serial_threaded.start()
    self.bool_loop = True

    self.main_loop() 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def NX_waitok():
    endcount = 0
    bytecount = 0
    ok = False
    byte = ''

    while endcount != 3:
        try:
            byte = ser.read()
        except termios.error, e:
            logger.error(_(u'termios.error in NX_waitok: {}').format(e[1]))
        
        if byte == '':
            logger.info(_(u'Serial Communication Timeout!'))
            break
        bytecount += 1
        if (byte[0] == '\xff'):
            endcount += 1
        elif (byte[0] == '\x01' and bytecount == 1):
            endcount = 0
            ok = True
        else:
            endcount = 0 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def connect(self):
        try:
            print "Connecting to Arduino on port", self.port, "..."
            self.port = Serial(port=self.port, baudrate=self.baudrate, timeout=self.timeout, writeTimeout=self.writeTimeout)
            # The next line is necessary to give the firmware time to wake up.
            time.sleep(1)
            test = self.get_baud()
            if test != self.baudrate:
                time.sleep(1)
                test = self.get_baud()   
                if test != self.baudrate:
                    raise SerialException
            print "Connected at", self.baudrate
            print "Arduino is ready."

        except SerialException:
            print "Serial Exception:"
            print sys.exc_info()
            print "Traceback follows:"
            traceback.print_exc(file=sys.stdout)
            print "Cannot connect to Arduino!"
            os._exit(1) 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def load_stg1(ser:Serial, program:bytes):
	maxlen = 0xFC00 - 0xFA60
	if len(program) > maxlen:
		raise IndexError('Maximum program size is {} bytes'.format(maxlen))
	
	pgmlen = tohex(struct.pack('<H', len(program)))
	
	stage1 = fromhex(''.join([
		'E6F160FA',    # mov r1, #0FA60h
		'E6F2'+pgmlen, # mov r2, len(program)
		# wait:
		'9AB7FE70',    # jnb S0RIR, wait
		'7EB7',        # bclr S0RIR
		'F2F3B2FE',    # mov r3, S0RBUF
		'B961',        # movb [r1], rl3
		'0811',        # add r1, #1
		'2821',        # sub r2, #1
		'3DF7',        # jmpr cc_NZ, wait
		'CC00',        # nop
		'CC00',        # nop
		'CC00'         # nop
	]))

	load_bsl(ser, stage1+program, allow_overflow=True) 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def serial_ports():
    """ Lists serial port names

        :raises EnvironmentError:
            On unsupported or unknown platforms
        :returns:
            A list of the serial ports available on the system
    """
    if sys.platform.startswith('win'):
        ports = ['COM%s' % (i + 1) for i in range(256)]
    elif sys.platform.startswith('linux') or sys.platform.startswith('cygwin'):
        # this excludes your current terminal "/dev/tty"
        ports = glob.glob('/dev/ttyUSB*') # ubuntu is /dev/ttyUSB0
    elif sys.platform.startswith('darwin'):
        # ports = glob.glob('/dev/tty.*')
        ports = glob.glob('/dev/tty.SLAB_USBtoUART*')
    else:
        raise EnvironmentError('Unsupported platform')

    result = []
    for port in ports:
        try:
            s = serial.Serial(port)
            s.close()
            result.append(port)
        except serial.SerialException as e:
            if e.errno == 13:
                raise e
            pass
        except OSError:
            pass
    return result


# if __name__ == '__main__':
#     print(serial_ports()) 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def __init__(self, port_name=None, white_point=(1.0, 1.0, 1.0)):
        self.port_name = port_name
        self._channel_count = 4
        self._channels = [None] * self._channel_count
        self._channel_flags = [0] * self._channel_count
        self._clear_on_exit = False

        self.white_point = white_point

        if self.port_name is None:
            self.port_name = self._find_serial_port(VID, PID, NAME)

            if self.port_name is None:
                raise IOError("Unable to find Mote device")

        self.port = serial.Serial(self.port_name, 115200, timeout=1) 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def __init__(self, **params):
        if type(params['port']) is str:
            params['port']=serial.Serial(
                port=params['port'],
                baudrate=115200
            )
        self._port = params['port']
        self._ssh_pubkey_data = params['ssh_pubkey_data']
        self._has_jtag = params['has_jtag']
        self._check_uboot = params['check_uboot']
        self._cleanup_payload = params['cleanup_payload']
        self._reboot_after = params['reboot_after']
        self._uboot_only = params['uboot_only']
        self._boot_only = params['boot_only']
        self._jtag_hardware = params['jtag_hardware'] 

# 需要導入模塊: import serial [as 別名]
# 或者: from serial import Serial [as 別名]
def getSerialOrNone(portname):
    try:
       return serial.Serial(port=portname,baudrate=115200,parity=serial.PARITY_ODD,stopbits=serial.STOPBITS_TWO,bytesize=serial.SEVENBITS)
    except:
       return None