本文整理匯總了Python中scapy.config.conf.sniff_promisc方法的典型用法代碼示例。如果您正苦於以下問題:Python conf.sniff_promisc方法的具體用法?Python conf.sniff_promisc怎麽用?Python conf.sniff_promisc使用的例子?那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類scapy.config.conf
的用法示例。
在下文中一共展示了conf.sniff_promisc方法的5個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的Python代碼示例。
示例1: __init__
# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import sniff_promisc [as 別名]
def __init__(self, iface = None, type = ETH_P_ALL, promisc=None, filter=None):
self.type = type
self.outs = None
self.iface = iface
if iface is None:
iface = conf.iface
if promisc is None:
promisc = conf.sniff_promisc
self.promisc = promisc
self.ins = open_pcap(iface, 1600, self.promisc, 100)
try:
ioctl(self.ins.fileno(),BIOCIMMEDIATE,struct.pack("I",1))
except:
pass
if type == ETH_P_ALL: # Do not apply any filter if Ethernet type is given
if conf.except_filter:
if filter:
filter = "(%s) and not (%s)" % (filter, conf.except_filter)
else:
filter = "not (%s)" % conf.except_filter
if filter:
self.ins.setfilter(filter)
示例2: __init__
# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import sniff_promisc [as 別名]
def __init__(self, iface = None, type = ETH_P_ALL, promisc=None, filter=None):
self.type = type
self.outs = None
self.iface = iface
if iface is None:
iface = conf.iface
if promisc is None:
promisc = conf.sniff_promisc
self.promisc = promisc
self.ins = open_pcap(iface, 1600, self.promisc, 100)
try:
ioctl(self.ins.fileno(),BIOCIMMEDIATE,struct.pack("I",1))
except:
pass
if type == ETH_P_ALL: # Do not apply any filter if Ethernet type is given
if conf.except_filter:
if filter:
filter = "(%s) and not (%s)" % (filter, conf.except_filter)
else:
filter = "not (%s)" % conf.except_filter
if filter:
self.ins.setfilter(filter)
示例3: __init__
# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import sniff_promisc [as 別名]
def __init__(self, iface = None, type = ETH_P_ALL, promisc=None, filter=None, nofilter=0):
self.type = type
self.outs = None
self.ins = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, socket.htons(type))
self.ins.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, 0)
_flush_fd(self.ins)
if iface is not None:
self.ins.bind((iface, type))
if not nofilter:
if conf.except_filter:
if filter:
filter = "(%s) and not (%s)" % (filter, conf.except_filter)
else:
filter = "not (%s)" % conf.except_filter
if filter is not None:
attach_filter(self.ins, filter)
if promisc is None:
promisc = conf.sniff_promisc
self.promisc = promisc
if iface is None:
self.iff = get_if_list()
else:
if iface.__class__ is list:
self.iff = iface
else:
self.iff = [iface]
if self.promisc:
for i in self.iff:
set_promisc(self.ins, i)
self.ins.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, 2**30)
示例4: __init__
# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import sniff_promisc [as 別名]
def __init__(self, iface=None, type=ETH_P_ALL, promisc=None, filter=None, monitor=None): # noqa: E501
super(L2pcapListenSocket, self).__init__()
self.type = type
self.outs = None
self.iface = iface
if iface is None:
iface = conf.iface
if promisc is None:
promisc = conf.sniff_promisc
self.promisc = promisc
# Note: Timeout with Winpcap/Npcap
# The 4th argument of open_pcap corresponds to timeout. In an ideal world, we would # noqa: E501
# set it to 0 ==> blocking pcap_next_ex.
# However, the way it is handled is very poor, and result in a jerky packet stream. # noqa: E501
# To fix this, we set 100 and the implementation under windows is slightly different, as # noqa: E501
# everything is always received as non-blocking
self.ins = open_pcap(iface, MTU, self.promisc, 100,
monitor=monitor)
try:
ioctl(self.ins.fileno(), BIOCIMMEDIATE, struct.pack("I", 1))
except Exception:
pass
if type == ETH_P_ALL: # Do not apply any filter if Ethernet type is given # noqa: E501
if conf.except_filter:
if filter:
filter = "(%s) and not (%s)" % (filter, conf.except_filter) # noqa: E501
else:
filter = "not (%s)" % conf.except_filter
if filter:
self.ins.setfilter(filter)
示例5: __init__
# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import sniff_promisc [as 別名]
def __init__(self, iface = None, type = ETH_P_ALL, promisc=None, filter=None, nofilter=0):
self.type = type
self.outs = None
self.ins = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, socket.htons(type))
self.ins.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, 0)
if iface is not None:
self.ins.bind((iface, type))
if not nofilter:
if conf.except_filter:
if filter:
filter = "(%s) and not (%s)" % (filter, conf.except_filter)
else:
filter = "not (%s)" % conf.except_filter
if filter is not None:
attach_filter(self.ins, filter)
if promisc is None:
promisc = conf.sniff_promisc
self.promisc = promisc
if iface is None:
self.iff = get_if_list()
else:
if iface.__class__ is list:
self.iff = iface
else:
self.iff = [iface]
if self.promisc:
for i in self.iff:
set_promisc(self.ins, i)
_flush_fd(self.ins)
self.ins.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, 2**30)