Python conf.L3socket方法代碼示例

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def sr1flood(x, promisc=None, filter=None, iface=None, nofilter=0, *args, **kargs):  # noqa: E501
    """Flood and receive packets at layer 3 and return only the first answer

    :param prn:      function applied to packets received
    :param verbose:  set verbosity level
    :param nofilter: put 1 to avoid use of BPF filters
    :param filter:   provide a BPF filter
    :param iface:    listen answers only on the given interface
    """
    s = conf.L3socket(promisc=promisc, filter=filter, nofilter=nofilter, iface=iface)  # noqa: E501
    ans, _ = sndrcvflood(s, x, *args, **kargs)
    s.close()
    if len(ans) > 0:
        return ans[0][1] 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def IPv6inIP(dst='203.178.135.36', src=None):
  _IPv6inIP.dst = dst
  _IPv6inIP.src = src
  if not conf.L3socket == _IPv6inIP:
    _IPv6inIP.cls = conf.L3socket
  else:
    del(conf.L3socket)
  return _IPv6inIP 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def send(x, inter=0, loop=0, count=None, verbose=None, realtime=None,
         return_packets=False, socket=None, iface=None, *args, **kargs):
    """
    Send packets at layer 3

    :param x: the packets
    :param inter: time (in s) between two packets (default 0)
    :param loop: send packet indefinetly (default 0)
    :param count: number of packets to send (default None=1)
    :param verbose: verbose mode (default None=conf.verbose)
    :param realtime: check that a packet was sent before sending the next one
    :param return_packets: return the sent packets
    :param socket: the socket to use (default is conf.L3socket(kargs))
    :param iface: the interface to send the packets on
    :param monitor: (not on linux) send in monitor mode
    :returns: None
    """
    need_closing = socket is None
    kargs["iface"] = _interface_selection(iface, x)
    socket = socket or conf.L3socket(*args, **kargs)
    results = __gen_send(socket, x, inter=inter, loop=loop,
                         count=count, verbose=verbose,
                         realtime=realtime, return_packets=return_packets)
    if need_closing:
        socket.close()
    return results 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def sendp(x, inter=0, loop=0, iface=None, iface_hint=None, count=None,
          verbose=None, realtime=None,
          return_packets=False, socket=None, *args, **kargs):
    """
    Send packets at layer 2

    :param x: the packets
    :param inter: time (in s) between two packets (default 0)
    :param loop: send packet indefinetly (default 0)
    :param count: number of packets to send (default None=1)
    :param verbose: verbose mode (default None=conf.verbose)
    :param realtime: check that a packet was sent before sending the next one
    :param return_packets: return the sent packets
    :param socket: the socket to use (default is conf.L3socket(kargs))
    :param iface: the interface to send the packets on
    :param monitor: (not on linux) send in monitor mode
    :returns: None
    """
    if iface is None and iface_hint is not None and socket is None:
        iface = conf.route.route(iface_hint)[0]
    need_closing = socket is None
    socket = socket or conf.L2socket(iface=iface, *args, **kargs)
    results = __gen_send(socket, x, inter=inter, loop=loop,
                         count=count, verbose=verbose,
                         realtime=realtime, return_packets=return_packets)
    if need_closing:
        socket.close()
    return results 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def sr(x, promisc=None, filter=None, iface=None, nofilter=0, *args, **kargs):
    """
    Send and receive packets at layer 3
    """
    s = conf.L3socket(promisc=promisc, filter=filter,
                      iface=iface, nofilter=nofilter)
    result = sndrcv(s, x, *args, **kargs)
    s.close()
    return result 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def sr1(x, promisc=None, filter=None, iface=None, nofilter=0, *args, **kargs):
    """
    Send packets at layer 3 and return only the first answer
    """
    iface = _interface_selection(iface, x)
    s = conf.L3socket(promisc=promisc, filter=filter,
                      nofilter=nofilter, iface=iface)
    ans, _ = sndrcv(s, x, *args, **kargs)
    s.close()
    if len(ans) > 0:
        return ans[0][1] 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def fragleak(target, sport=123, dport=123, timeout=0.2, onlyasc=0, count=None):
    load = "XXXXYYYYYYYYYY"
    pkt = IP(dst=target, id=RandShort(), options=b"\x00" * 40, flags=1)
    pkt /= UDP(sport=sport, dport=sport) / load
    s = conf.L3socket()
    intr = 0
    found = {}
    try:
        while count is None or count:
            if count is not None and isinstance(count, int):
                count -= 1
            try:
                if not intr:
                    s.send(pkt)
                sin = select.select([s], [], [], timeout)[0]
                if not sin:
                    continue
                ans = s.recv(1600)
                if not isinstance(ans, IP):  # TODO: IPv6
                    continue
                if not isinstance(ans.payload, ICMP):
                    continue
                if not isinstance(ans.payload.payload, IPerror):
                    continue
                if ans.payload.payload.dst != target:
                    continue
                if ans.src != target:
                    print("leak from", ans.src)
                if not ans.haslayer(conf.padding_layer):
                    continue
                leak = ans.getlayer(conf.padding_layer).load
                if leak not in found:
                    found[leak] = None
                    linehexdump(leak, onlyasc=onlyasc)
            except KeyboardInterrupt:
                if intr:
                    raise
                intr = 1
    except KeyboardInterrupt:
        pass 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def IPv6inIP(dst='203.178.135.36', src=None):
    _IPv6inIP.dst = dst
    _IPv6inIP.src = src
    if not conf.L3socket == _IPv6inIP:
        _IPv6inIP.cls = conf.L3socket
    else:
        del(conf.L3socket)
    return _IPv6inIP 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def __init__(self, *args, **kargs):
        raise RuntimeError(
            "Sniffing and sending packets is not available at layer 2: "
            "winpcap is not installed. You may use conf.L3socket or"
            "conf.L3socket6 to access layer 3"
        ) 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def start(self):
        self.s = conf.L3socket(iface=self.iface) 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def fragleak(target,sport=123, dport=123, timeout=0.2, onlyasc=0):
    load = "XXXXYYYYYYYYYY"
#    getmacbyip(target)
#    pkt = IP(dst=target, id=RandShort(), options="\x22"*40)/UDP()/load
    pkt = IP(dst=target, id=RandShort(), options="\x00"*40, flags=1)/UDP(sport=sport, dport=sport)/load
    s=conf.L3socket()
    intr=0
    found={}
    try:
        while 1:
            try:
                if not intr:
                    s.send(pkt)
                sin,sout,serr = select([s],[],[],timeout)
                if not sin:
                    continue
                ans=s.recv(1600)
                if not isinstance(ans, IP): #TODO: IPv6
                    continue
                if not isinstance(ans.payload, ICMP):
                    continue
                if not isinstance(ans.payload.payload, IPerror):
                    continue
                if ans.payload.payload.dst != target:
                    continue
                if ans.src  != target:
                    print "leak from", ans.src,


#                print repr(ans)
                if not ans.haslayer(Padding):
                    continue

                
#                print repr(ans.payload.payload.payload.payload)
                
#                if not isinstance(ans.payload.payload.payload.payload, Raw):
#                    continue
#                leak = ans.payload.payload.payload.payload.load[len(load):]
                leak = ans.getlayer(Padding).load
                if leak not in found:
                    found[leak]=None
                    linehexdump(leak, onlyasc=onlyasc)
            except KeyboardInterrupt:
                if intr:
                    raise
                intr=1
    except KeyboardInterrupt:
        pass 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def fragleak(target,sport=123, dport=123, timeout=0.2, onlyasc=0):
    load = "XXXXYYYYYYYYYY"
#    getmacbyip(target)
#    pkt = IP(dst=target, id=RandShort(), options="\x22"*40)/UDP()/load
    pkt = IP(dst=target, id=RandShort(), options="\x00"*40, flags=1)/UDP(sport=sport, dport=sport)/load
    s=conf.L3socket()
    intr=0
    found={}
    try:
        while 1:
            try:
                if not intr:
                    s.send(pkt)
                sin,sout,serr = select([s],[],[],timeout)
                if not sin:
                    continue
                ans=s.recv(1600)
                if not isinstance(ans, IP): #TODO: IPv6
                    continue
                if not isinstance(ans.payload, ICMP):
                    continue
                if not isinstance(ans.payload.payload, IPerror):
                    continue
                if ans.payload.payload.dst != target:
                    continue
                if ans.src  != target:
                    print "leak from", ans.src,


#                print repr(ans)
                if not ans.haslayer(conf.padding_layer):
                    continue

                
#                print repr(ans.payload.payload.payload.payload)
                
#                if not isinstance(ans.payload.payload.payload.payload, conf.raw_layer):
#                    continue
#                leak = ans.payload.payload.payload.payload.load[len(load):]
                leak = ans.getlayer(conf.padding_layer).load
                if leak not in found:
                    found[leak]=None
                    linehexdump(leak, onlyasc=onlyasc)
            except KeyboardInterrupt:
                if intr:
                    raise
                intr=1
    except KeyboardInterrupt:
        pass 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def fragleak(target,sport=123, dport=123, timeout=0.2, onlyasc=0):
    load = "XXXXYYYYYYYYYY"
#    getmacbyip(target)
#    pkt = IP(dst=target, id=RandShort(), options="\x22"*40)/UDP()/load
    pkt = IP(dst=target, id=RandShort(), options="\x00"*40, flags=1)/UDP(sport=sport, dport=sport)/load
    s=conf.L3socket()
    intr=0
    found={}
    try:
        while 1:
            try:
                if not intr:
                    s.send(pkt)
                sin,sout,serr = select([s],[],[],timeout)
                if not sin:
                    continue
                ans=s.recv(1600)
                if not isinstance(ans, IP): #TODO: IPv6
                    continue
                if not isinstance(ans.payload, ICMP):
                    continue
                if not isinstance(ans.payload.payload, IPerror):
                    continue
                if ans.payload.payload.dst != target:
                    continue
                if ans.src  != target:
                    print "leak from", ans.src,


#                print repr(ans)
                if not ans.haslayer(Padding):
                    continue


#                print repr(ans.payload.payload.payload.payload)

#                if not isinstance(ans.payload.payload.payload.payload, Raw):
#                    continue
#                leak = ans.payload.payload.payload.payload.load[len(load):]
                leak = ans.getlayer(Padding).load
                if leak not in found:
                    found[leak]=None
                    linehexdump(leak, onlyasc=onlyasc)
            except KeyboardInterrupt:
                if intr:
                    raise
                intr=1
    except KeyboardInterrupt:
        pass 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def __init__(self, *args, **kargs):
        external_fd = kargs.pop("external_fd", {})
        self.send_sock_class = kargs.pop("ll", conf.L3socket)
        self.recv_sock_class = kargs.pop("recvsock", conf.L2listen)
        self.is_atmt_socket = kargs.pop("is_atmt_socket", False)
        self.started = threading.Lock()
        self.threadid = None
        self.breakpointed = None
        self.breakpoints = set()
        self.interception_points = set()
        self.intercepted_packet = None
        self.debug_level = 0
        self.init_args = args
        self.init_kargs = kargs
        self.io = type.__new__(type, "IOnamespace", (), {})
        self.oi = type.__new__(type, "IOnamespace", (), {})
        self.cmdin = ObjectPipe()
        self.cmdout = ObjectPipe()
        self.ioin = {}
        self.ioout = {}
        for n in self.ionames:
            extfd = external_fd.get(n)
            if not isinstance(extfd, tuple):
                extfd = (extfd, extfd)
            ioin, ioout = extfd
            if ioin is None:
                ioin = ObjectPipe()
            elif not isinstance(ioin, SelectableObject):
                ioin = self._IO_fdwrapper(ioin, None)
            if ioout is None:
                ioout = ObjectPipe()
            elif not isinstance(ioout, SelectableObject):
                ioout = self._IO_fdwrapper(None, ioout)

            self.ioin[n] = ioin
            self.ioout[n] = ioout
            ioin.ioname = n
            ioout.ioname = n
            setattr(self.io, n, self._IO_mixer(ioout, ioin))
            setattr(self.oi, n, self._IO_mixer(ioin, ioout))

        for stname in self.states:
            setattr(self, stname,
                    _instance_state(getattr(self, stname)))

        self.start() 

# 需要導入模塊: from scapy.config import conf [as 別名]
# 或者: from scapy.config.conf import L3socket [as 別名]
def fragleak(target,sport=123, dport=123, timeout=0.2, onlyasc=0):
    load = "XXXXYYYYYYYYYY"
#    getmacbyip(target)
#    pkt = IP(dst=target, id=RandShort(), options="\x22"*40)/UDP()/load
    pkt = IP(dst=target, id=RandShort(), options="\x00"*40, flags=1)/UDP(sport=sport, dport=sport)/load
    s=conf.L3socket()
    intr=0
    found={}
    try:
        while 1:
            try:
                if not intr:
                    s.send(pkt)
                sin,sout,serr = select([s],[],[],timeout)
                if not sin:
                    continue
                ans=s.recv(1600)
                if not isinstance(ans, IP): #TODO: IPv6
                    continue
                if not isinstance(ans.payload, ICMP):
                    continue
                if not isinstance(ans.payload.payload, IPerror):
                    continue
                if ans.payload.payload.dst != target:
                    continue
                if ans.src  != target:
                    print("leak from", ans.src,end=" ")


#                print repr(ans)
                if not ans.haslayer(conf.padding_layer):
                    continue

                
#                print repr(ans.payload.payload.payload.payload)
                
#                if not isinstance(ans.payload.payload.payload.payload, conf.raw_layer):
#                    continue
#                leak = ans.payload.payload.payload.payload.load[len(load):]
                leak = ans.getlayer(conf.padding_layer).load
                if leak not in found:
                    found[leak]=None
                    linehexdump(leak, onlyasc=onlyasc)
            except KeyboardInterrupt:
                if intr:
                    raise
                intr=1
    except KeyboardInterrupt:
        pass