Python hub.sleep方法代碼示例

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def prefix_check_loop(self):
        while True:
            prefixs_to_install = self.hop_db.get_uninstalled_prefix_list()
            self.logger.debug("prefix to install: %s", str(prefixs_to_install))

            for prefix in prefixs_to_install:
                prefix_nw = IPNetwork(prefix)

                for internal_network in self.cfg_mgr.get_internal_networks():
                    int_nw = IPNetwork(internal_network)

                    if int_nw == prefix_nw:
                        self.logger.info('Internal network, ignored.')
                        continue
                nexthop = self.hop_db.get_nexthop(prefix)
                self.install_best_path(prefix, nexthop)

            hub.sleep(3) 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def _monitor(self):
		"""
			Main entry method of monitoring traffic.
		"""
		while CONF.weight == 'bw':
			self.stats['flow'] = {}
			self.stats['port'] = {}
			for dp in self.datapaths.values():
				self.port_features.setdefault(dp.id, {})
				self._request_stats(dp)
				# Refresh data.
				self.capabilities = None
				self.best_paths = None
			hub.sleep(setting.MONITOR_PERIOD)
			if self.stats['flow'] or self.stats['port']:
				self.show_stat('flow')
				self.show_stat('port')
				hub.sleep(1) 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def _send_loop(self):
        """
        A loop to proceed periodic BFD packet transmission.
        """
        while self._enable_send:
            hub.sleep(self._xmit_period)

            # Send BFD packet. (RFC5880 Section 6.8.7.)

            if self._remote_discr == 0 and not self._active_role:
                continue

            if self._remote_min_rx_interval == 0:
                continue

            if self._remote_demand_mode and \
                    self._session_state == bfd.BFD_STATE_UP and \
                    self._remote_session_state == bfd.BFD_STATE_UP and \
                    not self._is_polling:
                continue

            self._send() 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def _do_timeout_for_query(self, timeout, datapath):
        """the process when the QUERY from the querier timeout expired."""
        dpid = datapath.id

        hub.sleep(timeout)
        outport = self._to_querier[dpid]['port']

        remove_dsts = []
        for dst in self._to_hosts[dpid]:
            if not self._to_hosts[dpid][dst]['replied']:
                # if no REPORT message sent from any members of
                # the group, remove flow entries about the group and
                # send a LEAVE message if exists.
                self._remove_multicast_group(datapath, outport, dst)
                remove_dsts.append(dst)

        for dst in remove_dsts:
            del self._to_hosts[dpid][dst] 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def _switch_request_async(self, interval):
        while self.is_active:
            request = event.EventSwitchRequest()
            LOG.debug('switch_request async %s thread(%s)',
                      request, id(hub.getcurrent()))
            self.send_event(request.dst, request)

            start = time.time()
            busy = interval / 2
            i = 0
            while i < busy:
                if time.time() > start + i:
                    i += 1
                    LOG.debug('  thread is busy... %s/%s thread(%s)',
                              i, busy, id(hub.getcurrent()))
            LOG.debug('  thread yield to switch_reply handler. thread(%s)',
                      id(hub.getcurrent()))

            # yield
            hub.sleep(0)

            LOG.debug('  thread get back. thread(%s)',
                      id(hub.getcurrent()))
            hub.sleep(interval - busy) 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def test_0_call_error_notification(self):
        l = []

        def callback(n):
            l.append(n)
        c = rpc.Client(self._client_sock, notification_callback=callback)
        c.send_notification(b'notify2', [b'notify_foo', []])
        hub.sleep(0.5)  # give the peer a chance to run
        obj = b'hoge'
        try:
            c.call(b'err', [obj])
            raise Exception("unexpected")
        except rpc.RPCError as e:
            assert e.get_value() == obj
        assert len(l) == 1
        n = l.pop(0)
        method, params = n
        assert method == b'notify_foo'
        assert params == [] 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def test_spawn_event3(self):
        def _child(ev, ev2, result):
            ev2.wait()
            hub.sleep(0.5)
            result.append(1)
            ev.set()

        ev = hub.Event()
        ev2 = hub.Event()
        result = []
        with hub.Timeout(2):
            hub.spawn(_child, ev, ev2, result)
            hub.spawn(_child, ev, ev2, result)
            hub.sleep(0.5)
            ev2.set()  # this should wake up the above created two threads
            ev.wait(timeout=1)
        assert len(result) == 2 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def test_spawn_joinall(self):
        def _child(ev2, result):
            ev2.wait()
            hub.sleep(0.5)
            result.append(1)
            raise BaseException("this exception should not be propagated")

        ev2 = hub.Event()
        threads = []
        result = []
        with hub.Timeout(2):
            threads.append(hub.spawn(_child, ev2, result))
            threads.append(hub.spawn(_child, ev2, result))
            hub.sleep(0.5)
            ev2.set()  # this should wake up the above created two threads
            hub.joinall(threads)
        assert len(result) == 2 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def next(self):
        """Pops and returns the first outgoing message from the list.

        If message list currently has no messages, the calling thread will
        be put to sleep until we have at-least one message in the list that
        can be poped and returned.
        """
        # We pick the first outgoing available and send it.
        outgoing_msg = self.outgoing_msg_list.pop_first()
        # If we do not have any outgoing msg., we wait.
        if outgoing_msg is None:
            self.outgoing_msg_event.clear()
            self.outgoing_msg_event.wait()
            outgoing_msg = self.outgoing_msg_list.pop_first()

        return outgoing_msg


#
# Source
# 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def multipath_computation(self):
        while True:
            if not self.topo_shape.is_empty() and self.network_is_measured:
                computation_start = time.time()
                self.logger.info('Starting multipath computation sub-routine')
                self.topo_shape.multipath_computation()
                self.logger.info(
                    'Multipath computation finished in %f seconds',
                    time.time() - computation_start
                )

            self.MONITORING_PORT_STATS = True
            if self.UPDATE_FORWARDING_CONTINOUSLY:
                hub.sleep(10)
            else:
                break 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def _monitor(self):
		"""
			Main entry method of monitoring traffic.
		"""
		while CONF.weight == 'bw' or CONF.weight == 'hop':
			# Refresh data.
			self.stats['flow'] = {}
			self.stats['port'] = {}
			self.capabilities = None
			self.best_paths = None
			self.statRecord = []
			self.flows = []
			for dp in self.datapaths.values():
				self.port_features.setdefault(dp.id, {})
				self._request_stats(dp)
			hub.sleep(setting.MONITOR_PERIOD)
			if self.stats['flow'] or self.stats['port']:
				self.show_stat('flow')
				self.show_stat('port')
				hub.sleep(1) 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def _link_request_async(self, interval):
        while self.is_active:
            request = event.EventLinkRequest()
            LOG.debug('link_request async %s thread(%s)',
                      request, id(hub.getcurrent()))
            self.send_event(request.dst, request)

            start = time.time()
            busy = interval / 2
            i = 0
            while i < busy:
                if time.time() > start + i:
                    i += 1
                    LOG.debug('  thread is busy... %s/%s thread(%s)',
                              i, busy, id(hub.getcurrent()))
            LOG.debug('  thread yield to link_reply handler. thread(%s)',
                      id(hub.getcurrent()))

            # yield
            hub.sleep(0)

            LOG.debug('  thread get back. thread(%s)',
                      id(hub.getcurrent()))
            hub.sleep(interval - busy) 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def test_0_call_error_notification(self):
        l = []

        def callback(n):
            l.append(n)
        c = rpc.Client(self._client_sock, notification_callback=callback)
        c.send_notification('notify2', ['notify_foo', []])
        hub.sleep(0.5)  # give the peer a chance to run
        obj = 'hoge'
        try:
            c.call('err', [obj])
            raise Exception("unexpected")
        except rpc.RPCError as e:
            assert e.get_value() == obj
        assert len(l) == 1
        n = l.pop(0)
        method, params = n
        assert method == 'notify_foo'
        assert params == [] 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def test_spawn_kill_joinall(self):
        def _child(ev2, result):
            ev2.wait()
            result.append(1)

        ev2 = hub.Event()
        threads = []
        result = []
        with hub.Timeout(2):
            threads.append(hub.spawn(_child, ev2, result))
            threads.append(hub.spawn(_child, ev2, result))
            hub.sleep(0.5)
            for t in threads:
                hub.kill(t)
            hub.joinall(threads)
        assert len(result) == 0 

# 需要導入模塊: from ryu.lib import hub [as 別名]
# 或者: from ryu.lib.hub import sleep [as 別名]
def next(self):
        """Pops and returns the first outgoing message from the list.

        If message list currently has no messages, the calling thread will
        be put to sleep until we have at-least one message in the list that
        can be popped and returned.
        """
        # We pick the first outgoing available and send it.
        outgoing_msg = self.outgoing_msg_list.pop_first()
        # If we do not have any outgoing msg., we wait.
        if outgoing_msg is None:
            self.outgoing_msg_event.clear()
            self.outgoing_msg_event.wait()
            outgoing_msg = self.outgoing_msg_list.pop_first()

        return outgoing_msg

    # For Python 3 compatibility